Analytical testing central laboratory

Analytical testing central laboratory, Total:255 items.

The international standard classification for "Analytical testing central laboratory" includes: Chemical analysis , Chemical reagents , Sensory analysis , Electrical and electronic testing , Medical Sciences and health care facilities in general .

The Chinese standard classification for "Analytical testing central laboratory" includes: Basic standards and general methods , Chemical reagent in general , Basic standards and general methods , Hygiene, safety and labor protection , Medical apparatus and devices in general , Sanitation in general .

Group Standards of the People's Republic of China

T/SDHCST 003-2019 CTCs Test Preparation Center Laboratory Regulations
T/CAMS 57-2021 Energy efficiency test method for laboratory equipment—Centrifuges
T/CMBA 023-2024 Requirements for construction and management of biomedical research laboratories
T/CAQI 386-2024 Guidelines for Safety Management of Analytical Chemistry Laboratories

Professional Standard - Public Safety Standards

GA/T 1780-2021 Specifications for construction of polygraph testing laboratory

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13868-2009 analysis - General guidance for the design of test rooms
GB/T 6682-2008 Water for analytical laboratory use - Specification and test methods
GB/T 13868-1992 Sensory analysis－General guidance for the design of test rooms
GB/T 23470.1-2009 Sensory analysis—General guidance for the staff of a sensory evaluation laboratory—Part 1:Staff responsibilities
GB/T 6682-1992 Water for laboratory use; Specifications
GB 4793.7-2001 Safety requirements for electrical equipment for measurement,control and laboratory use--Particular requirements for laboratory centrifuges

Professional Standard - Agriculture

GB 6682-1992 Analytical laboratory water specifications and test methods
水产品质量安全检验手册 1.5.1.0-2005 Chapter 1 General Introduction Section 5 Laboratory Inspection and Analysis Basis 1. Analytical Laboratory Water Specifications and Test Methods (GB 6682-1992)

Professional Standard - Machinery

JB/T 7439.6-1994 Terminology relating to laboratory instruments - Laboratory centrifuge
JB/T 11938-2014 Ammonia-Nitrogen Automatic Analyzers for Laboratory-Nessler's Reagent Spectrophotometry

Professional Standard - Medicine

YY/T 1915-2023 General requirments for laboratory testing of immunochromatographic kits

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories
DB14/T 2797-2023 Specifications for confirmation of chemical analysis methods in testing laboratories
DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography
DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy

Military Standard of the People's Republic of China-General Armament Department

GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories
GJB 2725-1996 General requirements for calibration laboratories and testing laboratories

Professional Standard - Nuclear Industry

EJ/T 1083-1998 Measurement control program of analytical chemistry laboratory for nuclear materials
EJ/T 751-2014 Specification for testing quality assurance of radioactive geological laboratories
EJ/T 751-1993 Quality Assurance Specifications for Geological Analysis and Testing Laboratories of Radioactive Minerals
EJ/T 1083-2012 Nuclear Material Analytical Chemistry Laboratory Measurement Control Program

Professional Standard - Commodity Inspection

SN/T 3590-2013 Standard guide for accountability and quality control in the chemical analysis laboratory

Professional Standard - Geology

DZ/T 0130.7-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 7: Coal Sample Analysis
DZ/T 0130.6-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 6: Water Sample Analysis

Professional Standard - Petroleum

SY/T 6232-1996 Classification of experimental equipment for petroleum core analysis

Professional Standard - Hygiene

WS/T 420-2013 Verification of analytical performance of quantitative kits by clinical laboratory

Hebei Provincial Standard of the People's Republic of China

DB13/T 2104-2014 Laboratory chemical analysis titration operating procedures
DB13/T 2105-2014 Laboratory chemical analysis pipetting operating procedures

Shandong Provincial Standard of the People's Republic of China

DB37/T 4003-2020 Neutralization test and ELISA test comparison laboratory evaluation standard

海关总署

SN/T 5295-2021 Guidelines for basic statistics in chemical analysis laboratories

SCC

06/30141610 DC ISO 20612. Water quality. Interlaboratory comparisons for proficiency testing of analytical testing laboratories
DANSK DS/EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods
AENOR UNE-EN ISO 3696:1996 Water for use in laboratory analysis. Specification and test methods. (ISO 3696:1987).
SN-CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
BS PD CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
SN-CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
DANSK DS/CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
DIN EN 18029 E:2023 Draft Document - Animal health diagnostic analyses - Electronic data exchange in laboratory analysis; German and English version prEN 18029:2023
NS-EN 15002:2006 Characterization of waste — Preparation of test portions from the laboratory sample
DANSK DS/EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratory sample
VDI 4221 BLATT 1-2015 Quality assurance — Requirements for interlaboratory tests in the field of emission control — Requirements for providers of interlaboratory tests
VDI 4221 BLATT 2-2017 Quality assurance — Requirements for interlaboratory tests in the field of emission control — Development, implementation and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions
NS-EN 15002:2015 Characterization of waste — Preparation of test portions from the laboratory sample
AWWA QTC98369 DBP Analyses for the ICR — How Well are Labs Doing?
DIN EN 15002 E:2014 Draft Document - Characterization of waste - Preparation of test portions from the laboratory sample; German version prEN 15002:2013
AWWA WQTC50450 Interlaboratory Validation of an Ion Chromatographic Method for the Analysis of DBP Anions in Drinking Water
DANSK DS/EN 17087:2019 Construction products: Assessment of release of dangerous substances – Preparation of test portions from the laboratory sample for testing of release and analysis of content
NS-EN 17087:2019 Construction products: Assessment of release of dangerous substances — Preparation of test portions from the laboratory sample for testing of release and analysis of content
NS 8005:1990 Geotechnical testing — Laboratory methods — Grain-size analysis of soil samples
AWWA WQTC71353 Real-time PCR Compared with Culture Method for the Analysis of Legionella in Cooling Towers: A Routine Lab View
SN-CEN/TR 16059:2010 Food analysis — Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
DANSK DS/ISO/TS 7013:2023 Water quality – Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
BS PD ISO/TS 7013:2023 Water quality. Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
CAN/CSA-C22.2 No.61010-2-020-2009(C2014) Safety rules for electrical measuring, regulating and laboratory apparatus - Part 2-020: Special requirements for laboratory centrifuges
BS 1121A:1949 Laboratory safety precautions in metallurgical analysis
CAN/CSA-C22.2 No.1010.2.020-1994(C2009) Safety rules for electrical measuring, regulating and laboratory apparatus - Part 2-020: Special requirements for laboratory centrifuges
DIN EN 17087 E:2017 Draft Document - Construction products - Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content; German and English version prEN 17087:2017
DANSK DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS EN 61010-2-020:1995 Safety requirements for electrical equipment for measurement, control and laboratory use-Particular requirements for laboratory centrifuges
DANSK DS/EN 12741:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations
NS-EN 12741:1999 Biotechnology — Laboratories for research, development and analysis — Guidance for biotechnology laboratory operations
NS-EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
DANSK DS/CEN/TR 16059:2011 Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins

Korean Agency for Technology and Standards (KATS)

KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS I ISO 20612:2009 Water quality－Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS M ISO 3696-2020 Water for analytical laboratory use－Specification and test methods
KS M ISO 3696-2010(2020) Water for analytical laboratory use－Specification and test methods
KS M ISO 3696:2010 Water for analytical laboratory use-Specification and test methods
KS D ISO 7242:2006 Chemical analysis of light metals and their alloys－Statistical interpretation of inter-laboratory trials
KS C IEC 61010-2-20:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-20:Particular requirements for laboratory centrifuges
KS C IEC 61010-2-20:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges

US-FCR

FCR COE ER 1110-1-1401-1989 INTERLABORATORY TESTING PROGRAM FOR CHEMICAL ANALYSES
FCR FED H-08-5 CHAP 210-1989 CARDIOVASCULAR LABORATORIES
FCR FED H-08-9 CHAP 210-1989 CARDIO VASCULAR LABORATORIES
FCR COE EM 200-1-1-1994 VALIDATION OF ANALYTICAL CHEMISTRY LABORATORIES
FCR VA 01 45 29-2012 TESTING LABORATORY SERVICES
FCR FED H-08-1 SEC 01410-2004 TESTING LABORATORY SERVICES
FCR COE ER 1110-1-8100-1997 LABORATORY INVESTIGATIONS AND TESTING

KR-KS

KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories

GOSTR

GOST R 57093-2016 Requirements for testing laboratories (centers) of railway products

International Organization for Standardization (ISO)

ISO/TS 20612:2007 Water quality - Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
ISO 664:1990 Oilseeds; reduction of laboratory sample to test sample
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
ISO/PRF TS 7013 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO/TR 7242:1981 Chemical analysis of light metals and their alloys; Statistical interpretation of inter-laboratory trials

British Standards Institution (BSI)

BS EN ISO 3696:1995(1999) Water for analytical laboratory use — Specification and test methods
BS EN ISO 3696:1987 Water for analytical laboratory use - Specification and test methods
BS EN ISO/IEC 15423:2010 Water for analytical laboratory use - Specification and test methods
BS EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods
BS 6898:1987 Specification for glass centrifuge tubes for general laboratory use
BS EN 12738:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
23/30478882 DC BS EN 18029. Animal health diagnostic analyses. Electronic data exchange in laboratory analysis
BS EN 15002:2015 Characterization of waste. Preparation of test portions from the laboratory sample
BS EN 17087:2019 Construction products: Assessment of release of dangerous substances. Preparation of test portions from the laboratory sample for testing of release and analysis of content
BS 6460-1:1983 Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories
BS EN 12741:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations

Danish Standards Foundation

DS/EN ISO 3696:1996 Water for analytical laboratory use - Specification and test methods
DS/EN 15002:2006 Characterization of waste - Preparation of test portions from the laboratory sample
DS/CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
DS/CEN/TR 16059:2011 Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
DS/EN 12741:2000 Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations
DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods

German Institute for Standardization

DIN ISO 3696:1991 Water for analytical laboratory use; specification and test methods; identical with ISO 3696:1987
DIN EN 18029:2023 Animal health diagnostic analyses - Electronic data exchange in laboratory analysis; German and English version prEN 18029:2023
DIN EN 18029:2023-11 Animal health diagnostic analyses - Electronic data exchange in laboratory analysis; German and English version prEN 18029:2023 / Note: Date of issue 2023-10-13
DIN ISO 3696:1991-06 Water for analytical laboratory use; specification and test methods; identical with ISO 3696:1987
DIN EN 15002:2015-07 Characterization of waste - Preparation of test portions from the laboratory sample; German version EN 15002:2015
DIN EN 17087:2019-05 Construction products - Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content; German version EN 17087:2019
DIN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density, Pycnometer method (ISO/TS 17892-3:2004); German version CEN ISO/TS 17892-3:2004
DIN 19683-9:2012-07 Soil quality - Physical laboratory tests - Part 9: Determination of the saturated hydraulic water conductivity in the cylindrical core-cutter
DIN EN 17087:2017 Construction products - Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content; German and English version prEN 17087:2017
DIN EN 17087:2019 Construction products - Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content
DIN EN 15708:2010 Water quality - Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water; German version EN 15708:2009
DIN 58970-1:1996 Laboratory centrifuges - Part 1: Definitions, testing, marking
DIN 19683-9:2012 Soil quality - Physical laboratory tests - Part 9: Determination of the saturated hydraulic water conductivity in the cylindrical core-cutter
DIN EN 12741:1999-10 Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations; German version EN 12741:1999

Military Standards (MIL-STD)

DOD A-A-53200-1987 CENTRIFUGE, LABORATORY (HAND HELD)
DOD A-A-51420-1986 CENTRIFUGE, LABORATORY
DOD A-A-53317-1987 CENTRIFUGE, LABORATORY
DOD A-A-51525 A-1990 CENTRIFUGE, LABORATORY (SMALL)
DOD A-A-54473-1991 CENTRIFUGE, LABORATORY (HEMATOLOGY)
DOD A-A-54783-1994 CENTRIFUGE, LABORATORY, GENERAL PURPOSE
DOD A-A-54080-1990 CENTRIFUGE, LABORATORY, MICRO-HEMATOCRIT
DOD A-A-51351-1986 CENTRIFUGE, LABORATORY (MICROHEMATOCRIT, BATTERY POWERED)

American Society for Testing and Materials (ASTM)

ASTM D1796-97e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-04 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-11 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-83(1990)e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97(2002) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D3856-95(2006) Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
ASTM D1796-04(2009) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02(2006) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-08 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11(2016)e1 Standard test method for determination of water and sediment in crude oil by centrifugation (laboratory method)
ASTM D4007-81(1995)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM E2935-13 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D1796-11e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM E882-87(1998) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
ASTM D4007-11(2016) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM E882-87(2003) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
ASTM D1796-11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM E2057-00 Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations
ASTM D3856-11 Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water
ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E2935-17 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E2935-16 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E2057-23 Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Violence Investigations
ASTM D346-04e1 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D3856-95(2000) Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
ASTM RR-D02-1419 1998 D6217-Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D346-04(2010) Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D6217-21 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D346-04 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D271-70e1 Laboratory Sampling and Analysis of Coal and Coke
ASTM D2216-10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

HU-MSZT

MNOSZ 11 281-1952 Laboratory data series analysis measurements
MSZ 12000/4.lap-1968 Laboratory testing hard coal making analysis samples
MSZ 24000/7-1981 Laboratory analysis of carbon, determination of water content
MNOSZ 700-3.lap-1955 Semiconductor Model Analysis Test Laboratory Sample Preparation
MSZ 18154-1972 Airborne and acoustic test laboratory, field testing

GSO

GSO ISO 3696:2009 Water for analytical laboratory use – Specification and test methods
GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
OS GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories

BE-NBN

NBN T 01-211-1988 Water for analytical laboratory use - Specification and test methods

Spanish Association for Standardization (UNE)

UNE 55-532-1987 Static analysis of results from laboratory tests
UNE 55-532-1990 Static analysis of results from laboratory tests
UNE-EN ISO 3696:1996 WATER FOR ANALYTICAL LABORATORY USE. SPECIFICATION AND TEST METHODS. (ISO 3696:1987).
UNE 51082:1986 STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL-OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE)
UNE-EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratory sample
UNE-EN ISO 15701:2015 Characterization of waste - Preparation of test portions from the laboratory sample
UNE-EN 15002:2007 Characterization of waste - Preparation of test portions from the laboratory sample
UNE-EN 17087:2020 Construction products: Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content
UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
UNE-EN 12741:2000 Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations
UNE-EN 61010-2-020/A1:1997 0AFETAY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. PART 2-010: PARTICULAR REQUIREMENTS FOR LABORATORY CENTRIFUGES.

South African Bureau of Standard

SANS 3696:1987 Water for analytical laboratory use - Specification and test methods

Underwriters Laboratories (UL)

UL 3101-2-20-1997 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Laboratory Centrifuges First Edition
UL 61010A-2-020-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Centrifuges First Edition

Standard Association of Australia （SAA）

AS 2850:1986 Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct

Lithuanian Standards Office

LST EN ISO 3696:1996 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
LST EN 15002-2006 Characterization of waste - Preparation of test portions from the laboratory sample
LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
LST EN 12741-2000 Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations

API - American Petroleum Institute

API PUBL 4694-1999 Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports
API PUBL 4599-1994 Interlaboratory Study of Three Methods for Analyzing Petroleum Hydrocarbons in Soils

IN-BIS

IS 10782-1983 Laboratory determination method of dynamic modulus of core samples

American National Standards Institute （ANSI)

ANSI/ASTM E2935:2013 Practice for Conducting Equivalence Testing in Laboratory Applications
ANSI/TNI EL-V1-2009 Management and Technical Requirements for Laboratories Performing Environmental Analyses
ANSI/ASTM E2489:2016 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

VN-TCVN

TCVN 4851-1989 Water for analytical laboratory use.Specifications and test methods
TCVN 6779-2008 Fuel oils.Determination of water and sediment.Centrifuge method (Laboratory procedure)

Association Francaise de Normalisation

XP CEN/TS 17455:2020 Animal feed - Sampling and analysis methods - Performance criteria for mycotoxin analysis methods validated in a single laboratory or following an interlaboratory test
NF EN ISO 3696:1995 Eau pour laboratoire à usage analytique - Spécification et méthodes d'essai.
NF A06-000:1979 Statistical interpretation of interlaboratory tests. Simplified method applicable to maximum 20 laboratories and maximum 10 results per laboratory.
NF X30-455*NF EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratory sample
FD V03-119*FD CEN/TR 16059:2011 Food analysis - Performance criteria for single laboratory validated of analysis for the determination of mycotoxins
NF EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratory sample
FD A06-002*FD CEN/TR 10345:2014 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
NF X41-569:2014 Wood preservatives - Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water
NF U47-700:2019 Analysis methods in Animal Health - System for exchanging dematerialized data in analysis laboratories - ELabs Animal Health
NF EN 17087:2019 Construction products: Assessment of the emission of hazardous substances Preparation of test portions from the laboratory sample for emission testing and content analysis
NF EN 12485:2017 Safety requirements for electrical measuring, regulating and laboratory apparatus Part 2-020: special requirements for laboratory centrifuges
NF EN 10028-6:2017 Safety requirements for electrical measuring, regulating and laboratory apparatus Part 2-020: special requirements for laboratory centrifuges
NF EN 61010-2-020:2017 Safety requirements for electrical measuring, regulating and laboratory apparatus Part 2-020: special requirements for laboratory centrifuges
NF EN 10028-4:2017 Safety requirements for electrical measuring, regulating and laboratory apparatus Part 2-020: special requirements for laboratory centrifuges
NF EN 1993-1-5/A1:2017 Safety requirements for electrical measuring, regulating and laboratory apparatus Part 2-020: special requirements for laboratory centrifuges
NF X42-053*NF EN 12741:1999 Biotechnology. Laboratories for research, development and analysis. Guidance for biotechnology laboratory operations.
FD CEN/TR 17078:2017 Safety requirements for electrical measuring, regulating and laboratory apparatus Part 2-020: special requirements for laboratory centrifuges
NF EN 10028-2:2017 Safety requirements for electrical measuring, regulating and laboratory apparatus Part 2-020: special requirements for laboratory centrifuges
NF EN 12741:1999 Biotechnology - Research, Development and Analysis Laboratories - Guide for Biotechnology Laboratory Operations

RU-GOST R

GOST R 52501-2005 Water for analytical laboratory use. Specifications
GOST 8.624-2013 State system for ensuring the traceability of measurements. Laboratory water in crude oil analyzers. Verification method
GOST R 54883-2011 Technique of services quality estimation of the accredited test laboratories and the test center
GOST R 54883-2011(2020) Technique of services quality estimation of the accredited test laboratories and the test center
GOST R 53133.1-2008 Clinical laboratory technologies. Quality control of clinical laboratory tests. Part 1. Limits of allowable errors of the results of the analyte measurements in clinical-diagnostics laboratories

European Committee for Standardization (CEN)

EN ISO 3696:1995 Water for Analytical Laboratory Use- Specification and Test Methods (ISO 3696 : 1987)
EN 12738:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
CEN/TR 16059:2010 Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
EN ISO 8589:2010 Sensory analysis - General guidance for the design of test rooms (Incorporates Amendment A1: 2014)
EN 15708:2009 Water quality - Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water

BR-ABNT

ABNT NBR ISO 7263:2012 Role-core - Determination of crush resistance after being curled in the laboratory

PL-PKN

PN C13062-1963 Laboratory glassware.Q?est-tubes for centrifuge;
PN H04631-1963 Corrosion testing of metals Laboratory testing of heat-resistance of steel in air

YU-JUS

JUS U.B1.042-1997 Testing ofsoil - Determination of the California bearing rado in laboratory
JUS B.E8.131-1991 Insulating glass units. Determination of dew point temperature, Laboratory test

North Atlantic Treaty Organization Standards Agency

STANAG 4632-2005 DEPLOYABLE NBC ANALYTICAL LABORATORY

NO-SN

NS 8005-1990 Geotechnical testing - Laboratory methods - Grain-size analysis of soil samples

VDI - Verein Deutscher Ingenieure

VDI 4221 Blatt 1-2014 Qualitaetssicherung - Anforderungen an Ringversuche im Bereich des Immissionsschutzes - Anforderungen an Anbieter von Ringversuchen
VDI 4221 BLATT 4-2019 Quality assurance - Requirements on interlaboratory tests in immission control - Design@ performance and evaluation of interlaboratory tests for olfactometry under laboratory conditions

Society of Automotive Engineers (SAE)

SAE J3130-2023 Laboratory Measurement of Vibration Damping Properties Using Mechanical Impedance Method at the Center of a Bar
SAE J2334-201604 Laboratory Cyclic Corrosion Test

AT-ON

ONORM B 4422-1-1992 Geotechnical engineering (foundation engineering) — Analysis of soil specimen — Determination of water permeability — Laboratory tests

Indonesia Standards

SNI 1744-2012 Metode uji CBR laboratorium
SNI 13-3496-1994 Mining goods, Preparation of sample for chemical analysis and physical characteristic test in laboratories
SNI 8072-2016 Test method for measuring the potential for soil collapse in the laboratory

RO-ASRO

STAS 11350-1979 Textiles LABORATORY SAMPLING AND SPECIMENS PREPARATION FOR CHEMICAL ANALYSIS

CZ-CSN

CSN ISO 8589:1993 Sensory analysis — General guidance for tne design of test rooms
CSN 67 3091-1983 Laboratory tests of resistance of paint coatings in atmospherical conditíons

CEN - European Committee for Standardization

EN 17087:2019 Construction products: Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content
PREN 17087-2017 Construction products - Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content

SAE - SAE International

SAE J2334-2016 Laboratory Cyclic Corrosion Test
SAE J2334-2002 Cosmetic Corrosion Lab Test
SAE J2334-1998 Cosmetic Corrosion Lab Test

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE CH-99-9-1999 Symposium on Laboratory Verification and Testing