Impact resistance test

Impact resistance test, Total:200 items.

The international standard classification for "Impact resistance test" includes: Walls. Partitions. Facades , Textile fabrics , Doors and windows , Cement. Gypsum. Lime. Mortar .

The Chinese standard classification for "Impact resistance test" includes: Building construction and decoration engineering , Basic standards and general methods , Building members, accessories and equipment in general , Concrete, aggregate, plaster and mortar , Basic standard and general method on forestry , Mechanics Measurement .

Group Standards of the People's Republic of China

T/CEEIA 396-2019 Technical specification for the anti-load impact detection device of microgrid
T/ZSHG 016-2023 Test method for aerosol impact resistance test
T/CSAA 28-2024 Impact testing method for components Impact resistance test of composite plate
T/UNP 245-2024 Impact-resistant eyeshadow case

Professional Standard - Pharmaceutical Packaging

YBB 0038-2004 Kangjixiechongji Cedingfa Tests for impact resistance

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 29738-2013(英文版) Classification and testing methods for wind-borne debris impact resistance of building curtain walls, doors and windows
GB/T 4893.9-1992 Furniture－Test for surfaces－Assessment of resistance to impact
GB/T 22632-2008 Door leaves - Determination of the resistance to hard body impact
GB/T 33732-2017 Textiles -- Determination of resistance to water penetration -- Impact penetration test
GB/T 29908-2013 Classification and Test Method of Air-Blast Resistance Performance for Curtain Walls, Windows and Doors
GB/T 29738-2013 Graduations and test method for performance of exterior windows and doors,curtain walls impacted by windborne debris in windstorm

Professional Standard - Ferrous Metallurgy

YB 9248-1992 Technical specifications for compressive strength of hardened mortar by impact method

Professional Standard - Forestry

LY/T 2152-2013 Test method of resistance to impact indentation of wood

National Metrological Technical Specifications of the People's Republic of China

JJF 1969-2022 Calibration Specification for Impact Elastic Wave Measurement Apparatus

National Metrological Verification Regulations of the People's Republic of China

JJG(交通) 084-2007 Measurer for Impact Resistance of Retroreflective Sheeting
JJG 973-2002 Verification Regulation of Measuring Instrument for Shock

Gosstandart of Russia

GOST R 53007-2008 Paint materials. Rapid deformation (impact resistance) test method
GOST ISO 4211-4-2012 Furniture. Tests for surfaces. Part 4. Assessment of resistance to impact
GOST 4765-1973 Pain and lacquer materials. Method of determination impact resistance

Yugoslav Association for Standardization

JUS D.A1.047-1979 Testing ofwood. Determination ofimpact bending strength
JUS D.A1.033-1979 Testing of wood. Determination ofresistance to impact indentation
JUS D.E8.003-1987 Door leaves. Hard body impact test

Czech Standards Institute (UNMZ)

CSN ISO 7459:1992 Glass containers - Thermal shock resistance and thermal shock endurance - Test methods
CSN 62 1480-1986 Vulcanized rubber. Determintitioii of impact resilience by Schob pendulum

Ente Nazionale Italiano di Unificazione

UNI EN ISO 7459:2004 Glass containers - Thermal shock resistance and thermal shock endurance - Test methods
UNI EN 12030:1999 Self adhesive tapes - Measurement of impat resistance.
UNI 10442:1995 Composite stones. Determination of the resistance to impact.
UNI EN 104:1992 Ceramic tiles. Determination of resistance to thermal shock.
UNI EN 1517:2020 Surfaces for sports areas - Determination of resistance to impact
UNI EN 14019:2016 Curtain Walling - Impact resistance - Performance requirements
UNI EN ISO 10545-9:2014 Ceramic tiles - Part 9: Determination of resistance to thermal shock
UNI ISO 3351:1985 Wood. Determination of resistance to impact indentation.
UNI EN 744:1997 Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method.
UNI CEN/TS 15122:2006 Surfaces for sports areas - Determination of resistance of synthetic sports surfaces to repeated impact
UNI EN ISO 11343:2019 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method
UNI EN 17368:2020 Laminate floor coverings - Determination of impact resistance with small ball
UNI EN 14019:2004 Curtain Walling - Impact resistance - Performance requirements
UNI EN ISO 20567-3:2013 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body
UNI EN ISO 179-1:2002 Plastics - Dtermination of Charpy impact properties - Prova d'urto non strumentatoNon-instrumented impact test
UNI 8483:1983 Textile glass reinforced plastics. Determination of impact resistance by means of a falling dart.

Standards Norway

NS-EN 12030:1996 Self-adhesive tapes - Measurement of impact resistance
NS 8052:1981 Furniture units - Determination of resistance against impacts
NS 3146:1975 Measurement of resistance to hard body impact of door leaves
NS-EN 1517:2020 Surfaces for sports areas — Determination of resistance to impact
NS 8056:1981 Furniture units - Surfaces - Determination of resistance to impacts
NS-EN 1517:1999 Surfaces for sports areas — Determination of resistance to impact
NS-EN 14019:2016 Curtain Walling — Impact resistance — Performance requirements
NS-EN 14019:2004 Curtain Walling — Impact resistance — Performance requirements
NS 3547-1987 Watertight flexible sheets - Impact resistance tests
NS-EN 13696:2008 Wood flooring — Test methods to determine elasticity and resistance to wear and impact resistance
NS-ISO 8270:2023 Windows and doors - Determination of the resistance to soft and heavy body impact for doors
NS-EN 17368:2020 Laminate floor coverings — Determination of impact resistance with small ball
NS-EN 1128:1995 Cement-bonded particleboards — Determination of hard body impact resistance

German Institute for Standardization

DIN EN 12030:1996-07 Self-adhesive tapes - Measurement of impact resistance
DIN EN 1517:2020 Surfaces for sports areas - Determination of resistance to impact
DIN EN 14019:2016-11 Curtain Walling - Impact resistance - Performance requirements; German version EN 14019:2016
DIN EN 1517:2020-07 Surfaces for sports areas - Determination of resistance to impact; German version EN 1517:2020
DIN EN 14019:2004-09 Curtain Walling - Impact resistance - Performance requirements
DIN ISO 4532:1995 Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test; identical with ISO 4532:1991
DIN EN 1517 E:2018 Draft Document - Surfaces for sports areas - Determination of resistance to impact; German and English version prEN 1517:2018
DIN EN 14019 E:2014 Draft Document - Curtain Walling - Impact resistance - Performance requirements; German version prEN 14019:2014
DIN EN 1517 E:2018-09 Surfaces for sports areas - Determination of resistance to impact
DIN EN 13696:2009 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance; English version of DIN EN 13696:2009-02
DIN EN 13696:2009-02 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance; German version EN 13696:2008
DIN EN 17368:2020 Laminate floor coverings - Determination of impact resistance with small ball
DIN EN 17368:2020-05 Laminate floor coverings - Determination of impact resistance with small ball; German version EN 17368:2020
DIN EN 1128:1995-11 Cement-bounded particleboards - Determination of hard body impact resistance; German version EN 1128:1995
DIN EN ISO 20567-2:2022-12 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO/DIS 20567-2:2022); German and English version prEN ISO 20567-2:2022 / Note: Date of issue 2022-11-18*Intended as repla...

Lithuanian Standards Office

LST EN 12030-2000 Self-adhesive tapes - Measurement of impact resistance
LST EN 950-2002 Door leaves - Determination of the resistance to hard body impact
LST EN 1517-2000 Surfaces for sports areas - Determination of resistance to impact
LST EN 14019-2004 Curtain Walling - Impact resistance - Performance requirements
LST EN 1128-2000 Cement-bonded particleboards - Determination of hard body impact resistance

Danish Standards Foundation

DS/EN 12030:1997 Self adhesive tapes - Measurement of impact resistance
DANSK DS/EN 12030:1996 Self adhesive tapes - Measurement of impact resistance
DANSK DS/EN 950:2000 Door leaves - Determination of the resistance to hard body impact
DS/EN 1517:2000 Surfaces for sports areas - Determination of resistance to impact
DS/EN 950:2000 Door leaves - Determination of the resistance to hard body impact
DANSK DS/EN 1517:2020 Surfaces for sports areas – Determination of resistance to impact
DANSK DS/EN 14019:2016 Curtain Walling – Impact resistance – Performance requirements
DS/EN 14019:2004 Curtain Walling - Impact resistance - Performance requirements
DANSK DS/EN 13696:2009 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
DANSK DS/EN 17368:2020 Laminate floor coverings – Determination of impact resistance with small ball
DS/EN 1128:1997 Cement-bonded particleboards - Determination of hard body impact resistance
DANSK DS/EN 1128:1996 Cement-bonded particleboards - Determination of hard body impact resistance
DS/EN ISO 20567-2:2007 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
DS/EN 13696:2009 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance

SCC

FM Approvals 4473-2011(R2020) Impact Resistance Testing of Rigid Roofing Materials by Impacting with Freezer Ice Balls

Association Francaise de Normalisation

NF ISO 24335:2022 Laminate flooring - Determination of impact resistance
NF EN 1517:2020 Sports floors - Determination of impact resistance
NF EN 950:2000 Door leaves - Determination of resistance to hard body impact
NF P90-115*NF EN 1517:2020 Surfaces for sports areas - Determination of resistance to impact
NF T57-108:1979 TEXTILE GLASS REINFORCED PLASTICS. DETERMINATION OF IMPACT STRENGTH. CHARPY METHOD.
NF P62-513*NF ISO 24335:2022 Laminate floor coverings - Determination of impact resistance
NF D14-502:2019 Sanitary appliances - Shock resistance test
NF EN 14019:2016 Curtain facades - Impact resistance - Performance requirements
NF B53-645*NF EN 13696:2009 Wood Flooring - Test methods to determine elasticity and resistance to wear and impact resistance.
NF EN 1128:1995 Cement-bonded particle boards - Determination of the impact resistance of hard bodies
NF P62-507*NF EN 17368:2020 Laminate floor coverings - Determination of impact resistance with small ball
NF EN ISO 11343:2019 Adhesives - Determination of dynamic cleavage resistance of high strength bonded joints subjected to impact conditions - Corner impact method
NF EN ISO 3127:2018 Thermoplastic tubes - Determination of resistance to external impacts - Dial method
NF EN 17368:2020 Laminate flooring - Determination of impact resistance using a small diameter ball
NF EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (plugs) - Test 7b: Mechanical resistance to impact
NF T30-905-2*NF EN ISO 20567-2:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2 : single-impact test with a guided impact body
NF EN 14617-9:2005 Agglomerated stone - Test methods - Part 9: determination of impact resistance
NF EN 13696:2009 Wooden floors - Test methods for determining elasticity and abrasion resistance and impact resistance

GCC Standardization Organization

GSO ISO 3351:2015 Wood -- Determination of resistance to impact indentation
OS GSO ASTM D1709:2024 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
BH GSO ISO 8271:2024 Door leaves - Determination of the resistance to hard body impact
GSO ISO 4211-4:2007 Furniture - Tests for surfaces – Part 4: Assessment of resistance to impact
GSO ISO 11173:2013 Thermoplastics pipes - Determination of resistance to external blows - Staircase method

Spanish Association for Standardization (UNE)

UNE-EN 12030:1996 SELF ADHESIVE TAPES - MEASUREMENT OF IMPACT RESISTANCE
UNE-EN 1517:2000 SURFACES FOR SPORTS AREAS - DETERMINATION OF RESISTANCE TO IMPACT.
UNE-EN 950:2000 Door leaves - Determination of the resistance to hard body impact
UNE-EN 14019:2004 Curtain Walling - Impact resistance - Performance requirements
UNE-EN 1517:2021 Surfaces for sports areas - Determination of resistance to impact
UNE-EN 14019:2017 Curtain Walling - Impact resistance - Performance requirements
UNE 67-104-1984 Determination of thermal shock resistance of ceramic fine bricks
UNE-EN ISO 20567-2:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017)
UNE-EN 1128:1996 Cement-bonded particleboards - Determination of hard body impact resistance
UNE-EN 17368:2020 Laminate floor coverings - Determination of impact resistance with small ball
AENOR UNE 67032:1985 BOOKED CLAY TILES. IMPACT RESISTANCE TEST
UNE-EN 13696:2009 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance

GM Europe

GME GMI 60267-2010 Determination of Impact Resistance of Plastic Components (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14093.)

Swiss Association for Standardization (SNV)

SN EN 1517-2020 Surfaces for sports areas - Determination of resistance to impact
VSM 12029-1962 Paint and dye industry. Paint testing. Testing methods for earthquake-resistant and impact-resistant coatings

European Committee for Standardization (CEN)

EN ISO 4532:2022 Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test (ISO 4532:1991)
PREN 1517-2018 Surfaces for Sports Areas - Determination of Resistance to Impact
EN 14019:2016 Curtain Walling - Impact resistance - Performance requirements
PREN 17368-2019 Laminate floor coverings - Determination of impact resistance with small ball

Polski Komitet Normalizacyjny (PKN)

PN-EN 1517-2020-11 E Surfaces for sports areas - Determination of resistance to impact
PN B06079-1988 Woodcn doorsets Dctermination ot' shock resistance
PN B12038-10-1987 Ceramic tiles Method for determination of resistance to thermal shock
PN C89028-1968 Plastics Impact strength determination using a Dynstat device

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 8271:2007 Door leaves - Determination of the resistance to hard body impact
OS GSO ISO 3351:2015 Wood -- Determination of resistance to impact indentation
OS GSO ISO 4211-4:2007 Furniture - Tests for surfaces – Part 4: Assessment of resistance to impact
OS GSO ISO 20567-3:2015 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 3: Single-impact test with a free-flying impact body

International Organization for Standardization (ISO)

ISO 4532:1991 Vitreous and porcelain enamels; determination of the resistance of enamelled articles to impact; pistol test
ISO 3351:1975 Wood; Determination of resistance to impact indentation
ISO 20567-2:2023 Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
ISO 3127 Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS/NZS 4347.6:1995(R2014) Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)

National Standardisation Body (ASRO)

STAS 13102/1-1992 Morocco goods. Determination of thermal shock resistance
STAS SR EN 104-1994 Ceramic tiles - Determination of resistance of thermal shock
STAS 6175-1980 PLASTICS Determination of Dynstat impact resistance

Bureau of Indian Standards

IS 11930-2018 Glass Containers - Thermal Shock Resistance and Thermal Shock Endurance - Test Methods ( First Revision)

Swedish Institute for Standards

SS-EN ISO 4532:2022 Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test (ISO 4532:1991)
SS-EN 17368:2020 Laminate floor coverings - Determination of impact resistance with small ball
SS-EN 950:1999 Door leaves - Determination of the resistance to hard body impact
SS-EN ISO 7459:2004 Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO 7459:2004)
SS-EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge imapct method (ISO 11343:2003)
SS-EN 1063:2000 Glass in building - Security glazing - Testing and classification of resistance against bullet attack
SS-ISO 11343:2003 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method

British Standards Institution (BSI)

BS EN 14019:2016 Curtain Walling. Impact resistance. Performance requirements
BS EN ISO 20567-2:2006 Paints and varnishes. Determination of stone-chip resistance of coatings-Single-impact test with a guided impact body
BS EN 14019:2004 Curtain walling - Impact resistance - Performance requirements
BS EN ISO 10545-5:1998 Ceramic tiles - Determination of impact resistance by measurement of coefficient of restitution
BS ISO 24335:2022 Laminate floor coverings. Determination of impact resistance
BS EN ISO 20567-2:2023 Paints and varnishes. Determination of stone-chip resistance of coatings. Single-impact test with a guided impact body
BS EN ISO 20567-1:2017 Paints and varnishes. Determination of stone-chip resistance of coatings. Multi-impact testing
BS EN ISO 20567-1:2006 Paints and varnishes. Determination of stone-chip resistance of coatings-Multi-impact testing
BS EN 1517:2000 Surfaces for sports areas - Determination of resistance to impact
BS EN 17368:2020 Laminate floor coverings. Determination of impact resistance with small ball
BS 3637-3:1974 Physical characteristics of wrist watches for general purpose use. Shock resistant properties
BS EN ISO 11343:2005 Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge impact method
21/30430340 DC BS ISO 24335. Laminate floor coverings. Determination of impact resistance
BS EN 1128:1996(1999) Cement - bonded particleboards — Determination of hard body impact resistance
BS 5350-C4:1986 Methods of test for adhesives-Determination of impact resistance of adhesive bonds
BS ISO 24335:2006 Laminate floor coverings - Determination of impact resistance

American National Standards Institute （ANSI)

ANSI/FM 4473-2011 Impact Resistance Testing of Rigid Roofing Materials by Impacting with Freezer Ice Balls
ANSI/TIA/EIA 455-2C-1998 Impact Test Measurements for Fiber Optic Devices

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0532-13 DIN VDE 0532-13-1984*DIN 57532-13:1984 Transformers and reactors; lightning impulse and switching impulse testing of power transformers and reactors

Korean Agency for Technology and Standards (KATS)

KS K ISO 24335-2023 Laminate floor coverings — Determination of impact resistance
KS L 4011-1988 Standard test method for resistance to shock of CERAMIC TABLEWARE
KS G ISO 4211-4-2019 Furniture tests for surfaces － Part 4: Assessment of resistance to impact
KS L 1207-1985 Crazing resistance of glazed ceramic whiteware by a thermal shock method
KS L 1207-1999 Crazing resistance of glazed ceramic whiteware by a thermal shock method
KS L 1207-2013 Crazing resistance of glazed ceramic whiteware by a thermal shock method
KS K ISO 24335:2009 Laminate floor coverings-Determination of impact resistance

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 24335:2017 Laminate floor coverings -- Determination of impact resistance

GM Global

GMW 14093-2013 Determination of Impact Resistance of Plastic Components Issue 6; English
GMW 14700-2012 Stone Impact Resistance of Coatings Issue 3; English

American Society for Testing and Materials (ASTM)

ASTM RR-F06-1000 1990 F1265-Standard Test Method for Resistance to Impact for Resilient Floor Tile
ASTM F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM RR-D01-1193 2020 D8160-Test Method For Unnotched Cantilever Beam Impact Resistance (Izod Impact) Testing of Thermoplastic Traffic Marking Materials
ASTM D6905-20(2025)e1 Standard Practice for Impact Flexibility of Organic Coatings
ASTM F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D1822-21 Standard Test Method for Determining the Tensile-Impact Resistance of Plastics

Standard Association of Australia （SAA）

AS 1146.1:1972 Impact tests on plastics - Izod impact resistance of rigid plastics
AS 2983.13:1987 Methods of test for synthetic sporting surfaces - Determination of impact resistance