Molecular Weight Measurement Method

Molecular Weight Measurement Method, Total:200 items.

The international standard classification for "Molecular Weight Measurement Method" includes: Analytical chemistry , Ferrous metals , Man-made fibres , Physicochemical methods of analysis , Protection against dangerous goods , Mechanical testing of metals , Semiconducting materials , Cadmium, cobalt and their alloys , Crude petroleum , Television receivers , Measurement of electrical and magnetic quantities , Fuels , Surgical instruments and materials , Occupational safety. Industrial hygiene .

The Chinese standard classification for "Molecular Weight Measurement Method" includes: Steel and iron alloy analysis method , Electron optics and other physical optics instrument , Marking, packaging, transport and storage in general , Metal physical property test method , Semimetal and semiconductor material in general , Solar energy , Energy equipment for spacecraft , Rare metals and their alloys analysis method , Heavy metals and their alloys analysis method , Crude petroleum , Broadcasting and television transmission and receiving equipment , Technical management , Electronic measurement and equipment in general , Fuel oil , Medical apparatus and devices in general , Radiological sanitation protection .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17282-2012 Test method for estimation of mean relative molecular mass of petroleum oils from viscosity measurements
GB/T 6509-1986 Method for determination of low molecular weight compounds content in polyamide 6
GB 223.38-1985 Methods for chemical analysis of iron,steel and alloy; The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 1558-2009 Test method for substitutional atomic carbon concent of silicon by infrared absorption
GB/T 4324.18-1984 Methods for chemical analysis of tungsten - The atomic absorption spectrophotometric method for the determination of potassium content
GB/T 4324.16-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of magnesium content
GB/T 10505.4-1989 Determination of water content for packaged molecular sieve 3A
GB/T 4325.17-1984 Methods for chemical analysis of molybdenum;The atomic absorption spectrophotometric method for the determination of sodium content
GB/T 223.38-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 38200-2019(英文版) Solar Cell Quantum Efficiency Test Method
GB/T 1558-1997 Test method for substitutional atomic carbon content of silicon by infrared absorption
GB/T 23273.7-2009 Methods for chemical analysis of cobalt oxalate - Part 7: Determination of sulfate ion content - Combusition - Iodimetry
GB 10505.4-1989 Determination of water content for packaged molecular sieve 3A
GB/T 38200-2019 Measurement method for quantum efficiency of solar cells
GB/T 4375.10-1984 Methods for chemical analysis of gallium;The atomic absorption spectrophotometric method for the determination of zinc content
GB/T 14453-1993 Metallic material－STANDARD test method for the elastic modulus at high temperature－The method of disc-Vibrator
GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene by high performance size-exclusion chromatography
GB/T 4324.14-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of calcium content
GB/T 43735-2024 Methods for the preparation of Rydberg atoms for quantum precision measurement
GB/T 46223-2025 Microbeam analysis—Analytical electron microscopy—Method for the determination of energy resolution for electron energy loss spectrum analysis
GB/T 43735-2024(英文版) 量子精密测量中里德堡原子制备方法

Professional Standard - Energy

SY/T 5395-2024 Determination of Clay Cation Exchange Capacity and Alkalinity Content
NB/T 20235-2013 Measurement of Wide-range Neutron Fluence Rate by Voltage Mean Square

Professional Standard - Electron

SJ 3265-1989 Methods of measurement for acoustic performance of electronic organ
SJ/T 11346-2015 Methods of measurement for electronic projectors
SJ/T 11346-2006 Methods of measurement for electronic projectors
SJ/T 2089-2015 Type designation for electronic measuring instruments
SJ 2799-1987 Method for determination of trace water in electronic grade gases--Dew point method
SJ/T 2089-2001 Type designation for electronic measuring instruments

Professional Standard - Petroleum

SY/T 5395-1991 Determination method of clay cation exchange capacity and base content
SY 5395-2016 Determination method of clay cation exchange capacity and base content
SY/T 5395-2016 Determination method for clay cation exchange capacity and base component

Professional Standard - Aerospace

QJ 1870-1990 Epoxy resin molecular weight and its distribution test method (GPC method)

Professional Standard - Petrochemical Industry

SH/T 0730-2004 Estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements
SH/T 0583-1994 Determination method for hydrocarbon relative molecular weight (thermoelectric measurement vapor pressure method)

Group Standards of the People's Republic of China

T/CAQI 434-2025 Methods for Quality Inspection of Electronic Door Locks

Professional Standard - Medicine

YY/T 1678-2019 Test methodfor molecular weight averages and molecular weight distribution of polylactic acid and its copolymers for surgical implants

Professional Standard - Press and Publication

CY/T 114-2015 Examining method of e-book quality

National Health Commission of the People's Republic of China

GBZ/T 148-2002 Individual dose monitoring method with CR-39 neutron dosimeter using in neutron logging

Professional Standard - Chemical Industry

HG/T 6107～6110-2022 Determination methods of sodium ions, chloride ion content, chemical oxygen demand (COD) and calcium and magnesium ions in waste sulfuric acid (2022)

Military Standard of the People's Republic of China-General Armament Department

GJB 3495-1998 Neutron energy spectrum measurement method for fast neutron pulse reactor
GJB 7367-2011 Methodology of measurement for high-energy laser beam quality factor β

Professional Standard - Agriculture

213药典四部-2015 3100 assay method 3119 polymer conjugate assay method
201药典四部-2020 3100 assay method 3119 polymer conjugate assay method
240药典三部-2020 Assay method 3119 polymer conjugate assay method

Professional Standard - Aviation

HB 7064.5-1994 Metal heat treatment salt bath chemical analysis method for the determination of chloride ion content by argentometric method

Professional Standard - Non-ferrous Metal

YS/T 1497-2021 Analysis method for platinum compounds Determination of impurity anion content Ion chromatography
YS/T 1496-2021 Analysis method for palladium compounds Determination of impurity anion content Ion chromatography
YS/T 536.7-2009 Methods for chemical analysis of bismuth—Determination of arsenic content—Atomic fluorescence spectrometric method

Professional Standard - Ferrous Metallurgy

YB/T 5350-2006 Metallic material - Standard test method for the elastic modulus at high temperature - The method of disc - Vibrator

American Society for Testing and Materials (ASTM)

ASTM D2503-92(2007) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2002)e1 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2502-04 Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-92(2002) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2503-82(1987)e1 Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2502-04(2009) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-92(1996) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-12 adjunct(2020) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D2503-92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(1997) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM F326-96 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
ASTM D2080-92(1998) Determination method of average molecular weight of fatty quaternary ammonium salt
ASTM ADJD2502-70 Adjunct to D2502 Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-19 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM E3063-17 Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
ASTM E3063-16 Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
ASTM D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D5296-97 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM E3063-24 Standard Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

Japanese Industrial Standards Committee (JISC)

JIS K 3850:1995 Measuring method for airborne fibrous particles
JIS Z 4510:1989 Methods of Evaluating Dose Equivalent by Fast Neutron Film Badges
JIS K 3850-4:2000 Measuring method for airborne fibrous particles -- Part 4: Determination of asbestors plant emissions -- Method by fibre count measurement

Korean Agency for Technology and Standards (KATS)

KS F 2302-2002 Test method for particle size distribution of soils
KS C IEC 61988-2-3-2007(2022) Plasma display panels－Part 2－3：Measuring methods－Quality
KS C IEC 61988-2-3-2007(2017) Plasma display panels－Part 2－3：Measuring methods－Quality
KS F 2598-2011 Standard test method for distribution of total chloride ion in concrete
KS C IEC TR 62899-402-4-2024 Printed electronics — Part 402-4: Printability — Measurement of qualities — Classification and measurement methods for morphology
KS M 1082-2008 Determination of mercury in leather-Atomic spectrometry
KS C IEC 61988-2-3-2022 Plasma display panels－Part 2－3：Measuring methods－Quality
KS C IEC 60151-16-2003(2008) Measurements of the electrical properties of electronic tubes and valves － Part 16: Methods of measurement for television picture tubes
KS C IEC 60151-0:2013 Measurements of the electrical properties of electronic tubes and valves － Part 0: Precautions relating to methods of measurement of electronic tubes and valves
KS C IEC 60151-16-2013 Measurements of the electrical properties of electronic tubes and valves－Part 16：Methods of measurement for television picture tubes
KS C IEC 60151-4-2004(2009) Measurements of the electrical properties of electronic tubes and valves － Part 4: Methods of measuring noise factor
KS C IEC 60151-4:2013 Measurements of the electrical properties of electronic tubes and valves － Part 4: Methods of measuring noise factor
KS C IEC 60151-0-2004(2009) Measurements of the electrical properties of electronic tubes and valves － Part 0: Precautions relating to methods of measurement of electronic tubes and valves
KS C IEC 60151-0-2013 Measurements of the electrical properties of electronic tubes and valves － Part 0: Precautions relating to methods of measurement of electronic tubes and valves
KS C IEC 60151-4:2004 Measurements of the electrical properties of electronic tubes and valves-Part 4:Methods of measuring noise factor
KS C IEC 60151-0:2004 Measurements of the electrical properties of electronic tubes and valves-Part 0:Precautions relating to methods of measurement of electronic tubes and valves
KS C IEC 60151-16:2013 Measurements of the electrical properties of electronic tubes and valves － Part 16: Methods of measurement for television picture tubes
KS C IEC 60151-16:2003 Measurements of the electrical properties of electronic tubes and valves-Part 16:Methods of measurement for television picture tubes
KS K 3102-2007 Test methods for molecular weight cutoff of hollow fiber ultrafiltration membrane
KS M 6584-2008 Standard test method for rubber－Determination of metal content by Flame Atomic Absorption(AAS) analysis
KS A 4026-2002(2017) Measurements of the electrical properties of electronic tubes－Methods of measurement of Geiger－Müller counter tubes
KS A 4026-1987 Measurements of the electrical properties of electronic tubes－Methods of measurement of Geiger－Müller counter tubes
KS D ISO 17560-2003(2018) Surface chemical analysis - Secondary ion mass spectrometry - Boron depth distribution measurement method in silicon
KS D 0265-1989 Measurement of minority carrier life time in germanium by photoconductive decay method

German Institute for Standardization

DIN 6802-3:2007-06 Neutron dosimetry - Part 3: Methods for neutron measurement in radiation protection
DIN 6802-3:2007 Neutron dosimetry - Part 3: Methods for neutron measurement in radiation protection
DIN 44402-17:1973 Measurements of the electrical properties of electronic tubes; methods of measurement for television picture tubes
DIN 6802-3:1988 Neutron dosimetry; methods and devices for neutron measurement in radiation protection; ratings
DIN 44402-17:1973-07 Measurements of the electrical properties of electronic tubes; methods of measurement for television picture tubes
DIN 44402-6:1972-03 Measurement of the electrical properties of electronic tubes and valves; methods of measuring noise factor
DIN 6802-6:2013-01 Neutron dosimetry - Part 6: Methods for determination of absorbed dose using ionisation chambers
DIN 5032-1:1999 Photometry - Part 1: Methods of measurement

British Standards Institution (BSI)

BS 3762-3-3.4:1991 Analysis of formulated detergents-Quantitative test methods.-Method for determination of lower molecular mass cationic-active matter content
BS 3762-3-3.26:1989 Analysis of formulated detergents-Quantitative test methods-Method for determination of high molecular mass cationic-active matter content
BS 3727-8:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of manganese (photometric method)
BS 3727-2:1968 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of boron (photometric method)
BS 3727-6:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method)
BS 3727-4:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of chromium (photometric method)
BS 3727-9:1967 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (photometric method)
BS 3762-3.24:1988 Analysis of formulated detergents - Quantitative test methods - Method for determination of low molecular mass alcohols content
BS 3727-1:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method)
BS 3762-3.24:1988(2011) Analysis of formulated detergents — Part 3 : Quantitative test methods — Section 3.24 Methods for determination of low molecular mass alcohols content
BS 3727-13:1965 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method)
BS 3727-14:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method)
BS 3727-7:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method)
BS 3727-5:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method)
BS 3727-15:1968 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method)
BS 3727-10:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method)
BS 3727-11:1965 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method)
BS PD IEC TR 62899-402-4:2021 Printed electronics. Printability. Measurement of qualities. Classification and measurement methods for morphology
PD IEC TR 62899-402-4:2021 Printed electronics. Printability. Measurement of qualities. Classification and measurement methods for morphology
BS 3762 Sec.3.24:1988 Analysis of formulated detergents. Quantitative test methods. Method for determination of low molecular mass alcohols content
BS 3762-3.1:1990 Analysis of formulated detergents. Quantitative test methods. Method for determination of anionic-active matter content
BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS 3762-3.7:1986 Analysis of formulated detergents - Quantitative test methods - Method for determination of total non-ionic matter content
BS 3727-22:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (atomic absorption method)
BS 3762-3-3.4:1986 Analysis of formulated detergents. Quantitative test methods-Method for determination of cationic active matter content
BS 3727-12:1970 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of sulphur (combustion method)
06/30154593 DC EN 61988-2-3. Plasma display panels. Part 2-3. Measuring methods. Quality
BS EN 60510-3-4:1996 Methods of measurement for radio equipment used in satellite earth stations. Methods of measurement on combinations of sub-systems. Measurements for frequency division multiplex (f.d.m.) transmission
BS ISO 5834-4:2025 Implants for surgery. Ultra-high-molecular-weight polyethylene - Oxidation index measurement method
BS EN 61988-2-5:2012 Plasma display panels. Measuring methods. Acoustic nois
BS 3762-3-3.1:1983 Analysis of formulated detergents. Quantitative test methods-Method for determination of anionic-active matter content
BS 4478:1969 Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers
BS ISO 16014-2:2003 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography-Universal calibration method
BS ISO 16014-2:2019 Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Universal calibration method
BS IEC 62679-3-1:2014 Electronic paper displays. Optical measuring methods
BS 3762-3.7:1986(2008) Analysis of formulated detergents — Part 3 : Quantitative test methods — Section 3.7 Method for determination of total non - ionic matter content
BS 3727-21:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (atomic absorption method)

Gosstandart of Russia

GOST R 54352-2011 Food common salt. Determination of a mass fraction of magnesium-ion and calcium-ion by complexonometric method
GOST R 54353-2011 Food common salt. Determination of sulphate-ion mass fraction by gravimetric method
GOST R 54730-2011 Food common salt. Measurement (determination) of potassium-ion mass fraction by flame-photometric method
GOST 10857-1964 Oil seeds. Methods of determination of oil content
GOST 19438.15-1977 Low-power electronic tubes and valves. Methods of measuring the equivalent resistance of noises
GOST 22751-1977 Neutron generators. Method of fast neutron flux measurement
GOST 26951-1986 Soils. Determination of nitrate byionometric method

Universal Oil Products Company (UOP)

UOP 845-1990 Determination of Trace Alcohols in LPG by GC

Indonesia Standards

SNI 03-3962-1995 Test method for light sediment grain distribution gravimetrically by sieves

International Electrotechnical Commission (IEC)

IEC TR 62899-402-4:2021 Printed electronics - Part 402-4: Printability - Measurement of qualities - Classification and measurement methods for morphology
IEC 60151-21:1969 Measurements of the electrical properties of electronic tubes. Part 21 : Methods of measurement of cross-modulation in electronic tubes and valves
IEC 60151-17:1969 Measurements of the electrical properties of electronic tubes. Part 17 : Methods of measurement of gas filled tubes and valves
IEC 60151-26:1971 Measurements of the electrical properties of electronic tubes. Part 26 : Methods of measurement for camera tubes
IEC 60151-0:1966 Precautions relating to methods of measurement of electronic tubes and valves
IEC 60151-5:1964 Measurements of the electrical properties of electronic tubes. Part 5 : Methods of measuring hiss and hum
IEC 60151-19:1969 Measurements of the electrical properties of electronic tubes. Part 19 : Methods of measurement on corona stabilizers
IEC 60151-16:1968 Measurements of the electrical properties of electronic tubes. Part 16 : Methods of measurement for television picture tubes
IEC 60100:1962 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
IEC 60151-11:1966 Measurements of the electrical properties of electronic tubes. Part 11 : Methods of measurement of radiofrequency output power
IEC 60151-4:1963 Measurements of the electrical properties of electronic tubes and valves - Part 4: Methods of measuring noise factor
IEC 60151-28:1978 Measurements of the electrical properties of electronic tubes. Part 28 : Methods of measurement of colour television picture tubes
IEC 60151-23:1970 Measurements of the electrical properties of electronic tubes. Part 23 : Methods of measurement of vacuum pulse modulator tubes and valves

Türk Standardları Enstitüsü

TS 2961-1978 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES PART 27 METHODS OF MEASUREMENT FOR INTERMODULATION PRODUCTS IN TRANSMITTING TUBES
TS 2919-1978 MEASUREMENTS OP THE ELECTRICAL PROTERTIES OP ELECTRONtC TUBES AND VALVES PART 26: METHODS OP MEASUREMENT FOR CAMERA TUBES

Bureau of Indian Standards

IS 9281-2-1979 Electronic Weighing Systems - Part 2 Methods of Measurements
IS 9281 Pt.2-1979 Specification for electronic weighing systems Part II Measurement methods

American Bearing Manufacturers Association

15242-1-2004 Roller Bearings Measuring Methods For Vibration
ABMA 15242-1-2004 Roller Bearings Measuring Methods For Vibration

Standard Association of Australia （SAA）

AS 2292.2:1987(R2016) Methods for the analysis of solders - Determination of silver, bismuth, cadmium, copper, antimony, iron and zinc - Flame atomic absorption spectrometric method
AS 2292.2:1987 Methods for the analysis of solders - Determination of silver, bismuth, cadmium, copper, antimony, iron and zinc - Flame atomic absorption spectrometric method

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 6855-16-2001 Measurements of the electrical properties of electronic tubes and valves.Part 16: Methods of measurement of television picture tubes

American National Standards Institute （ANSI)

ANSI/ASTM D6474:1999 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)

International Organization for Standardization (ISO)

ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis

GCC Standardization Organization

GSO ISO 6490-2:1994 ANIMAL FEEDING STUFFS - DETERMINATION OF CALCIUM CONTENT - PART 2: ATOMIC ABSORPTION SPECTROMETRIC METHOD
GSO IEC 60151-0:2014 Measurements of the electrical properties of electronic tubes and valves - Part 0: Precautions relating to methods of measurement of electronic tubes and valves
GSO IEC 60510-3-4:2015 Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurement on combinations of sub-systems - Section four: Measurements for frequency division multiplex (f.d.m.) transmission
GSO IEC 60151-21:2014 Measurements of the electrical properties of electronic tubes and valves - Part 21: Methods of measurement of cross-modulation in electronic tubes and valves
GSO IEC 62899-503-3:2024 Printed electronics - Part 503-3: Quality assessment - Measuring method of contact resistance for the printed thin film transistor - Transfer length method
GSO IEC 60151-26:2014 Measurements of the electrical properties of electronic tubes and valves. Part 26: Methods of measurement for camera tubes

Association Francaise de Normalisation

NF C93-854:1991 Electronic Components Measurement methods for optical fibre cables
NF EN 61988-2-1:2012 Plasma display panels - Part 2-1: measurement methods - Optical and opto-electric measurements

Association of German Mechanical Engineers

VDI/VDE 3514 Blatt 2-2011 Measurement of humidity - Methods of measurement

Swedish Institute for Standards

SS-EN 60510-3-4:1994 Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurement on combinations of sub-systems - Section 4: Measurements for frequency division multiplex (f.d.m.) transmission

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60151-21:2014 Measurements of the electrical properties of electronic tubes and valves - Part 21: Methods of measurement of cross-modulation in electronic tubes and valves
OS GSO IEC 60151-4:2014 Measurements of the electrical properties of electronic tubes and valves - Part 4: Methods of measuring noise factor

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60151-21:2016 Measurements of the electrical properties of electronic tubes and valves - Part 21: Methods of measurement of cross-modulation in electronic tubes and valves
BH GSO IEC 60151-28:2016 Measurements of the electrical properties of electronic tubes - Part 28: Methods of measurement of colour television picture tubes

Yugoslav Association for Standardization

JUS N.R1.131-1977 Electronic tubes. Measurements of the electrical properties. Methods of measurements of crackling and scratching

Czech Standards Institute (UNMZ)

CSN 35 8533-1968 Methods of measuring cathode emiseion of electronio tubes

Ente Nazionale Italiano di Unificazione

UNI EN 12938:2002 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry

Others: molecular weight,Absolute Molecular Weight Measurement Method,Molecular Weight Measurement Method,Molecular weight 500,Molecular weight classification,molecular weight molecular weight,molecular weight spectrum,Molecular weight 81,Molecular weight gpc,Oil Molecular Weight,Rubber molecular weight,molecular weight laser,Molecular weight sample,Substance molecular weight,Molecular weight difference,molecular weight relative molecular weight,molecular weight molecular weight distribution,《Molecular weight,Molecular weight?