Characterization checklist

Characterization checklist, Total:84 items.

The international standard classification for "Characterization checklist" includes: Physicochemical methods of analysis , Essential oils .

The Chinese standard classification for "Characterization checklist" includes: Synthetic materials in general , Fragrances and flavors .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32868-2016 Nanotechnologies—Characterization of single-wall carbon nanotubes using thermogravimetric analysis
GB/T 32871-2016 Characterization of single-wall carbon nanotubes. Raman spectroscopy
GB/T 43784-2024 Characterization and measurement of the performance of single-photon sources

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39010-2020 Essential oils—Characterization

未注明发布机构

DIN EN 17333-4 E:2018-12 Characterisation of one component foam - Part 4: Mechanical strength
DIN EN 17333-2 E:2018-12 Characterisation of one component foam - Part 2: Expansion characteristics

BE-NBN

NBN 136-1951 vereniging zonder winstbejag voorheen Belgische Vereniging voor Standardisatie)

Association Francaise de Normalisation

NF T76-131:1989 Adhesives for plastic flexible floor coverings. List of characterization test methods.
NF EN 17333-1:2020 Characterization of single-component foams - Part 1: foam performance characteristics
NF EN 17333-3:2020 Caractérisation des mousses monocomposants - Partie 3 : application
NF EN ISO 7143:2007 Liants pour peintures et vernis - Méthodes d'essai pour caractériser les liants à base d'eau
NF EN 17333-5:2020 Caractérisation des mousses monocomposants - Partie 5 : isolation
NF EN 17333-4:2020 Caractérisation des mousses monocomposants - Partie 4 : résistance mécanique
NF EN 17333-2:2020 Caractérisation des mousses monocomposants - Partie 2 : caractéristiques d'expansion
FD T75-007*FD ISO/TR 21092:2005 Essential oils - Characterisation
NF T30-096*NF EN ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders.
FD ISO/TR 21092:2005 Huiles essentielles - Caractérisation
NF T76-309-1*NF EN 17333-1:2020 Characterisation of one component foam - Part 1 : foam yield characteristics

British Standards Institution (BSI)

BS EN 17333-1:2020 Characterisation of one component foam - Foam yield characteristics
BS EN 17333-3:2020 Characterisation of one component foam - Application
BS EN 17333-5:2020 Characterisation of one component foam - Insulation
BS EN 17333-4:2020 Characterisation of one component foam - Mechanical strength
BS EN 17333-2:2020 Characterisation of one component foam - Expansion characteristics
BS EN ISO 7143:2007 Binders for Paints and varnishes - Methods of test for characterizing water-based binders
BS 6069-1:1994 Characterization of air quality - Units of measurement

National Fire Protection Association (NFPA)

NFPA 1500H PART 6 SUPP 12-1998 NFPA Forms, Worksheets, and Checklists

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC IPC/JEDEC-9702-2004 Monotonic Bend Characterization of Board-Level Interconnects

ES-UNE

UNE-EN 17333-1:2020 Characterisation of one component foam - Part 1: Foam yield characteristics
UNE-EN 17333-3:2020 Characterisation of one component foam - Part 3: Application
UNE-EN 17333-5:2020 Characterisation of one component foam - Part 5: Insulation
UNE-EN 17333-4:2020 Characterisation of one component foam - Part 4: Mechanical strength
UNE-EN 17333-2:2020 Characterisation of one component foam - Part 2: Expansion characteristics

SCC

BS 6069-1:1981 Methods for characterization of air quality.-Units of measurement
NS 346-4:1949 Hinged ship windows — Sheet 4: Parts list and text sheet
DANSK DS/EN 17333-3:2020 Characterisation of one component foam – Part 3: Application
NS-EN 17333-3:2020 Characterisation of one component foam — Part 3: Application
NS-EN 17333-5:2020 Characterisation of one component foam — Part 5: Insulation
DANSK DS/EN 17333-5:2020 Characterisation of one component foam – Part 5: Insulation
DANSK DS/EN ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders
NS-EN 17333-2:2020 Characterisation of one component foam - Part 2: Expansion characteristics
AWWA MTC53911 Characterizations of Clean and NOM-Fouled Membranes in Terms of Surface Charge (By the Electrophoresis Method) and Pore Size Distribution
DANSK DS/EN 17333-4:2020 Characterisation of one component foam – Part 4: Mechanical strength
DANSK DS/EN 17333-2/AC:2020 Characterisation of one component foam – Part 2: Expansion characteristics
NS-EN 17333-2:2020+AC:2020 Characterisation of one component foam - Part 2: Expansion characteristics
NS-EN 17333-4:2020 Characterisation of one component foam — Part 4: Mechanical strength
DANSK DS/EN 17333-2:2020 Characterisation of one component foam – Part 2: Expansion characteristics
DIN EN 17333-3 E:2018 Draft Document - Characterization of One Component Foam (OCF) - Part 3: Application; German and English version prEN 17333-3:2018
DIN EN 17333-2 E:2018 Draft Document - Characterization of One Component Foam (OCF) - Part 2: Expansion; German and English version prEN 17333-2:2018
DIN EN 17333-1 E:2018 Draft Document - Characterization of One Component Foam (OCF) - Part 1: Yield; German and English version prEN 17333-1:2018
AENOR UNE 25184:1964 Selective list of nuts. With or without surface protection.
AENOR UNE-EN ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007)
NS-EN 17333-1:2020 Characterisation of one component foam — Part 1: Foam yield characteristics
DANSK DS/EN 17333-1:2020 Characterisation of one component foam – Part 1: Foam yield characteristics

German Institute for Standardization

DIN EN 17333-5:2020-07 Characterisation of one component foam - Part 5: Insulation; German version EN 17333-5:2020
DIN EN 17333-3:2020-07 Characterisation of one component foam - Part 3: Application; German version EN 17333-3:2020
DIN EN 17333-4:2020-07 Characterisation of one component foam - Part 4: Mechanical strength; German version EN 17333-4:2020
DIN EN 17333-2:2020-07 Characterisation of one component foam - Part 2: Expansion characteristics; German version EN 17333-2:2020 + AC:2020
DIN EN 17333-2:2020 Characterisation of one component foam - Part 2: Expansion characteristics (includes Corrigendum :2020)
DIN EN 17333-1:2020-07 Characterisation of one component foam - Part 1: Foam yield characteristics; German version EN 17333-1:2020
DIN EN 17333-1:2020 Characterisation of one component foam - Part 1: Foam yield characteristics

PT-IPQ

NP EN 135-2000 Respiratory protective devices List of equivalent terms

CEN - European Committee for Standardization

PREN 17333-1-2018 Characterization of One Component Foam (OCF) - Part 1: Yield
PREN 17333-3-2018 Characterization of One Component Foam (OCF) - Part 3: Application
PREN 17333-2-2018 Characterization of One Component Foam (OCF) - Part 2: Expansion
PREN 17333-5-2018 Characterization of One Component Foam (OCF) - Part 5: Insulation
EN ISO 7143:2004 Paints@ varnishes and binders Methods of test for characterizing water-based coating materials and binders
PREN 17333-4-2018 Characterization of One Component Foam (OCF) - Part 4: Mechanical strength

GSO

OS GSO ISO 7143:2015 Binders for paints and varnishes -- Methods of test for characterizing water-based binders
OS GSO ISO/TR 21092:2008 Essential oils- Characterization

International Electrotechnical Commission (IEC)

IEC 62027:2011 Preparation of object lists, including parts lists

Danish Standards Foundation

DS 5009:1989 Graphical symbols for diagrams - List of Errata
DS/EN ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders

IT-UNI

UNI EN 17333-2-2021 Characterisation of one component foam - Part 2: Expansion characteristics

European Committee for Standardization (CEN)

EN ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007)

(U.S.) Ford Automotive Standards

FORD A-3-2011 BOM / STOCK LIST

International Organization for Standardization (ISO)

ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders

Korean Agency for Technology and Standards (KATS)

KS I ISO 11057:2018 Air quality — Test method for filtration characterization of cleanable filter media
KS M ISO 7143:2022 Binders for paints and varnishes — Methods of test for characterizing water-based binders
KS H ISO 21092-2019 Essential oils — Characterization
KS H ISO 21092-2014(2019) Essential oils — Characterization

RU-GOST R

GOST ISO/TR 21092-2015 Essential oils. Identification

KR-KS

KS I ISO 11057-2018 Air quality — Test method for filtration characterization of cleanable filter media
KS M ISO 7143-2022 Binders for paints and varnishes — Methods of test for characterizing water-based binders

GOSTR

PNST 307-2018 Nanotechnologies. Single-wall carbon nanotubes. Characterization using thermogravimetric analysis