polymer potential

polymer potential, Total:482 items.

The international standard classification for "polymer potential" includes: Fuel cells , Textiles in general , Rubber , Raw materials for rubber and plastics in general , Galvanic cells and batteries in general , Raw materials for rubber and plastics , Animal and vegetable fats and oils , Measuring instruments , Insulating gases , Waterproofing , Other insulating materials , Thermoplastic materials , Measurement of volume, mass, density, viscosity , Dental materials , Implants for surgery, prosthetics and orthotics , Road equipment and installations .

The Chinese standard classification for "polymer potential" includes: Electrochemical power source , Basic standard and general method for synthetic rubber , Synthetic resin and plastic , Grease and oil processing and products , Radioactive isotope application instrument , Electrical insulating material and its products , Roof and pavement waterproof and barrier material , Flow capacity and material level instrument , Synthetic food additives , Stomatologic device, equipment and material , Orthopedic devices , Urban highway equipment and facility .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39748.10-2021 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration
GB/T 41418-2022 Textiles—Quantitative chemical analysis—Mixtures of meta-aramid and para-aramid fibres（method using dimethylacetamide and lithium chloride）
GB/T 28817-2022 Single cell test methods for polymer electrolyte fuel cell (PEFC)

Professional Standard - Petrochemical Industry

SH/T 1501-2001 Synthetic rubber latex-Preparation of dry polymer
SH/T 1764.1-2008 Rubber-Analysis by pyrolytic gas-chromatographic methods-Part 1:Identification of polymers(single polymers and polymer blends)

Fujian Provincial Standard of the People's Republic of China

DB35/T 1106-2011 Polymer Chip Multilayer Aluminum Electrolytic Capacitors

未注明发布机构

ANSI/ADA 27-2022 Polymer - based Restorative Materials
DIN EN ISO 17304 E:2012-08 Dental polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (draft)
ANSI/ADA 182-2021 Test Method for the Bonding Test Between Polymer Teeth and Denture Base Polymer
KS C 3835-2024 3.3 kV ~ 33 kV Polymer composite insulators for indoor use
AS/NZS 5000.3:2003(R2017) Electric cables - Polymeric insulated - Multicore control cables
DIN EN ISO 20795-2 E:2012-10 Dental Raw Polymers Part 2: Dental Raw Polymers (Draft)
DIN 7724:1972 Polymeric materials; grouping of polymeric materials based on their mechanical behaviour
ANSI/ASABE S640-2017 Quantities and Units of Electromagnetic Radiation for Plants (Photosynthetic Organisms)
DIN EN ISO 20795-1 E:2012-10 Dental raw material polymers Part 1: Denture raw material polymers (draft)
DIN 65262-1 E:2016-10 Aerospace series - Sealing compounds - Part 1: Polysulphide polymer base, Technical specification

Group Standards of the People's Republic of China

T/ZZB Q059-2022 Composite polymer for permeable mortar
T/CECS 10192-2022 Polymer micro-cement
T/PLQ 0003-2018 polymer modified bitumen
T/HEBQIA 025-2021 vegetable polymer fuel oil
T/SHHJ 000026-2019 Polymer-modified cement for waterproof membrane
T/ZZB 1736-2020 Polymer lithium-ion cells for mobile phones
T/CTES 1052-2022 Glycol-based colorants for in-situ polymerization dyeing of polyester fiber
T/ZAQ 10109-2022 Composite polymer for permeable mortar
T/CADBM 77-2024 Polymer modified decorative cement

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15022.10-2023 Resin based reactive compounds used for electrical insulation—Part 10: Polyesterimide resin composite
GB/T 28817-2012 Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB 8325-1987 Determination for pH of aqueous dispersions of polymers and copolymers
GB/T 15023-1994 Test methods for solventless polymerisable resinous compounds used for electrical insulation
GB/T 23445-2009 Polymer-modified cement compounds for waterproofing membrane
GB/T 22480-2008 Animal and vegetable fats and oils—Determination of polyethylene-type polymers
GB/T 11923-2008 Level meter utilizing ionizing radiation
GB/T 15022~15023-1994 Solventles polymerisable resinous compounds used for electrical insulation
GB/T 31062-2014 Polymeric polyols
GB/T 8325-1987 Determination for pH of aqueous dispersions of polymers and copolymers

Professional Standard - Chemical Industry

HG/T 3791-2005 Suspension poly (vinyl chloride) resins via vinyl chloride and nano - Calcium carbonate in situ polymerization
HG/T 3791-2015 Suspension poly(vinyl chloride)resins via vinyl chloride and nano-calcium carbonate in situ polymerization
HG/T 5517～5518-2019 Polymer coated urea and polymer sulfur coated urea (2019)

Professional Standard - Machinery

JB/T 9261-1999 Electrical capacitance level meter
JB/T 9261-2015 Electrical capacitance level measuring devices

Professional Standard - Light Industry

QB 1036-1991 Determination of Fluoride Content in Industrial Sodium Tripolyphosphate Stpp - Potentiometric Method

Professional Standard - Medicine

YY 0270.1-2011/ISO 20795-1:2008 Dentistry--Base polymers--Paet 1:Denture base polymers
YY/T 0270.2-2011 Dentistry—Base polymers—Part 2:Orthodontic base polymers
YY 0270.1-2011 Dentistry-Base polymers-Part 1:Denture base polymers

国家食品药品监督管理局

YY/T 0661-2017 Standard specification for semi-Crystalline poly ( lactide) polymer and copolymer resin for surgical implants

工业和信息化部

HG/T 5518-2019 Polymer sulfur coated urea
HG/T 5517-2019 Polymer coated urea
HG/T 5875-2021 Polyacrylamide polymer mud for pile foundation

Taiwan Provincial Standard of the People's Republic of China

CNS 14184-1998 Polymer-modified paving asphalt

Guizhou Provincial Standard of the People's Republic of China

DB52/T 806-2013 CA551 Conductive Polymer Electrolyte Chip Tantalum Capacitor

Professional Standard - Urban Construction

CJ/T 211-2005 Inspection manhole lid made of polymer matrix composites
CJ/T 212-2005 Water grate made of polymer matrix composites
CJ/T 544-2021 polymer permeable concrete

Professional Standard - Petroleum

SY/T 6462-2000 Polymer injection pump for oilfield
SY/T 6462-2012 Polymer Injection Pump for Oilfield

国家能源局

SY/T 6462-2019 Polymer injection pump for oilfield

Military Standard of the People's Republic of China-General Armament Department

GJB 7284-2011 Specification for flexible fluoropolymer heat-shrinkable electrical insulation sleeving

Anhui Provincial Standard of the People's Republic of China

DB34/T 2704-2016 Energy Consumption Quotas per Unit Product of Polyurethane Synthetic Leather

Professional Standard - Building Materials

JC/T 984-2005 Polymer modified cement mortars for waterproof

未注明发布机构

DIN EN ISO 20795-1 E:2012-10 Dental raw material polymers Part 1: Denture raw material polymers (draft)
ANSI/ASABE S640-2017 Quantities and Units of Electromagnetic Radiation for Plants (Photosynthetic Organisms)
DIN EN ISO 17304 E:2012-08 Dental polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (draft)
ANSI/ADA 27-2022 Polymer - based Restorative Materials
AS/NZS 5000.3:2003(R2017) Electric cables - Polymeric insulated - Multicore control cables
DIN 7724:1972 Polymeric materials; grouping of polymeric materials based on their mechanical behaviour
ANSI/ADA 182-2021 Test Method for the Bonding Test Between Polymer Teeth and Denture Base Polymer
KS C 3835-2024 3.3 kV ~ 33 kV Polymer composite insulators for indoor use
DIN EN ISO 20795-2 E:2012-10 Dental Raw Polymers Part 2: Dental Raw Polymers (Draft)
DIN 65262-1 E:2016-10 Aerospace series - Sealing compounds - Part 1: Polysulphide polymer base, Technical specification

GOSTR

GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent
GOST R 57868-2017 Polymer composites. Identification of polymer layers and inclusions by infrared microscopy
GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi

SCC

AS 1463:1973 Polyethylene pipe extrusion compounds (metric units)
BS ISO 7270-1:2003 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS EN ISO 182-4:2001 Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures-Potentiometric method
BS 2050:1961 Electrical resistance of conductive and anti-static flexible polymeric material
CEI 15-61:1997 Solventless polymerizable resin compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 11: Coating powders based on epoxy resins
BS 5664-3.4:1995 Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials-Filled polyurethane compounds
DANSK DS/EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
DANSK DS/EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
UL 746C-2018 Polymeric Materials - Used in Electrical Equipment Evaluations
DANSK DS/EN ISO 182-4:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method
BS 5664-3.3:1995 Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials-Unfilled polyurethane compounds
DANSK DS/ISO 80000-12:2019 Quantities and units – Part 12: Condensed matter physics
NS-EN ISO 182-4:2000 Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 4: Potentiometric method (ISO 182-4:1993)
DANSK DS/ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing
ADA 12-1999(R2008) Denture Base Polymers
HOLDEN HN 1447-2001 Methylpentene Polymer
HOLDEN HN 1415-2012 Polyamide 12 Compounds
ADA 139-2012 Dental Base Polymers
HOLDEN HN 1415-2001 Polyamide 12 Compounds
HOLDEN HN 2147-2002 Polymer Coating Powder
DANSK DS/EN ISO 17304:2013 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
MIL MIL-PRF-32597-2018 CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE
MIL MIL-W-81044B-1973 WIRE, ELECTRIC, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARYLENE INSULATED, COPPER OR COPPER ALLOY (SUPERSEDING MIL-W-81044A)(S/S BY SAE-AS81044)
NS-EN 13632:2003 Bitumen and bituminous binders — Visualisation of polymer dispersion in polymer modified bitumen
BS 6121-2:1989 Mechanical cable glands-Specification for polymeric glands
MIL MIL-PRF-32597A-2020 CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE
ADA 182-2021 Test Method for the Bonding Test Between Polymer Teeth and Denture Base Polymer
NS-EN ISO 20795-2:2013 Dentistry — Base polymers — Part 2: Orthodontic base polymers (ISO 20795-2:2013)
08/30168864 DC BS ISO 20795-2. Dentistry. Base polymers. Part 2. Orthodontic base polymers
NS-EN ISO 20795-1:2013 Dentistry — Base polymers — Part 1: Denture base polymers (ISO 20795-1:2013)
07/30164125 DC BS ISO 20795-1. Dentistry. Base polymers. Part 1. Denture base polymers
UNE-EN ISO 20795-1:2009 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008)
NS-EN ISO 20795-2:2010 Dentistry — Base polymers — Part 2: Orthodontic base polymers (ISO 20795-2:2010)
DANSK DS/ISO 17190-10:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 10: Test method for determination of extractable polymer content by potentiometric titration
UNE-EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2010)
BS PD CEN/TS 19101:2022 Design of fibre-polymer composite structures
UNE-EN 13632:2004 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
DANSK DS/EN 13632:2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
NS-EN 13632:2010 Bitumen and bituminous binders — Visualisation of polymer dispersion in polymer modified bitumen
AWPA A37-23 Standard for Determination of Quaternary Ammonium Compounds and Polymeric Betaine in Wood and Wood Treating Solutions by Potentiometric Titration Using Sodium Tetraphenylborate
SN-CEN/TS 19101:2022 Design of fibre-polymer composite structures
ADA 27-2016 Polymer-based Restorative Materials
MIL MIL-D-82710-1984 DELAY COMPOSITION, TUNGSTEN FLUOROCARBON COPOLYMER
ADA 27-2022 Polymer-based Restorative Materials
HOLDEN HN 1857-2001 Thermo Plastic Polyester Compounds
HOLDEN HN 1592-2009 MOULDING COMPOUND - POLYURETHANE
AS K125:1963 Polyethylene (polythene) pipe extrusion compounds
MIL MIL-P-82658-1977 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED
DIN CEN/TS 19101:2023 Design of fibre-polymer composite structures; German version CEN/TS 19101:2022
ADA 53-2008(R2013) Polymer-based Crown and Bridge Materials
AWWA JAW36089 Journal AWWA — Effects of Ozonation on Coagulation of NOM Using Polymer Alone and Polymer/Metal Salt Mixtures
12/30266398 DC BS EN ISO 20795-2. Dentistry. Base polymers. Part 2. Orthodontic base polymers
12/30266392 DC BS EN ISO 20795-1. Dentistry. Base polymers. Part 1. Denture base polymers
DANSK DS/CEN/TS 19101:2022 Design of fibre-polymer composite structures
NS-EN ISO 17304:2013 Dentistry — Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013)
AS 1429:1985 Polymeric insulated cables for electricity supply at working voltages 1.9/3.3 kV up to and including 19/33 kV
DIN EN 13632 E:2009 Draft Document - Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen; German version FprEN 13632:2009
UNE-EN ISO 3336:1996 DENTISTRY. SYNTHETIC POLYMER TEETH. (ISO 3336:1993).
12/30247457 DC BS EN ISO 17304. Dentistry. Polymerisation shrinkage: Method for determination of polymerisation shrinkage of polymer-based restorative materials
NS-EN ISO 3336:1996 Dentistry — Synthetic polymer teeth (ISO 3336:1993)

RU-GOST R

GOST 32649-2014 Polymer composites. Determination of mass per unit area of prepregs
GOST R ISO 17190-10-2015 Urine-absorbing aids for incontinence. Test methods for characterizing polymer-based absorbent materials. Part 10. Determination of extractable polymer content by potentiometric titration
GOST R 57713-2017 Polymer composites. Test methods for determination of density and relative density by displacement
GOST 12302-2013 Packs made of polymeric films and composite materials. General specifications
GOST 16336-2013 Polyethylene compositions for cable industry. Specifications
GOST 33742-2016 Polymer composites. Classification
GOST 28614-1990 Rubber. Identification of polymers (single polymers and blends) by pyrolytic gas chromatographic method
GOST R 50579-1993 Polymer composites. Classification
GOST 32588-2013 Polymer composites. List of properties
GOST R 50583-1993 Polymer composites. List of properties
GOST R 51720-2001 Polymeric sacks. General specifications
GOST 32521-2013 Polymeric sacks. General specifications
GOST R 58021-2017 Composite polymeric supports for overhead power lines of voltage 6 - 20 kV. General specifications
GOST R 51958-2002 Polymeric means of closing. General specifications
GOST 32794-2014 Polymer composites. Terms and definitions

Canadian Standards Association (CSA)

CSA C310-2021 Distribution class polymeric cutouts

Standard Association of Australia （SAA）

AS 4702:2000(R2013) Polymer cable protective sleeve
AS 4702:2000 Polymeric cable protection covers
AS/NZS 5000.3:2003 Electric cables - Polymeric insulated - Multicore control cables
AS 5204:2023 Fibre-Reinforced Polymer Bars

British Standards Institution (BSI)

BS EN ISO 182-4:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Potentiometric method
BS EN ISO 20795-2:2013 Dentistry. Base polymers. Orthodontic base polymers
BS EN ISO 80000-12:2019 Quantities and units - Condensed matter physics
BS EN ISO 20795-1:2008 Dentistry - Base polymers - Denture base polymers
BS ISO 7270-1:2003+A1:2010 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS EN ISO 20795-1:2013 Dentistry. Base polymers. Denture base polymers
BS ISO 7270-1:2020 Rubber. Analysis by pyrolytic gas-chromatographic methods - Identification of polymers (single polymers and polymer blends)
BS EN ISO 20795-2:2010 Dentistry - Base polymers - Orthodontic base polymers
BS EN ISO 182-4:2000(2002) Plastics — Determination ofthe tendency ofcompounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 4 : Potentiometric method
BS EN ISO 80000-12:2019(2022) Quantities and units Part 12 : Condensed matter physics
BS ISO 17190-10:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for determination of extractable polymer content by potentiometric titration
BS 7870-5:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution
BS 7870-5:1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution
BS ISO 6656:2002 Animal and vegetable fats and oils - Determination of polyethylene-type polymers
BS EN 13632:2010 Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen
BS EN ISO 305:1999 Plastics - Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method
BS EN ISO 17304:2013 Dentistry. Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
BS EN 60455-3-4:2003 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Filled polyurethane compounds - Sheet 4: Filled polyurethane compounds
BS 7655-10.1:2000 Specification for insulating and sheathing materials for cables - Polyethylene sheathing compounds - Thermoplastic medium density polyethylene (MDPE) sheathing compound
BS EN ISO 1567:2001 Dentistry — Denture base polymers

GSO

BH GSO ISO 17190-10:2017 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration
GSO ISO 17190-10:2016 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration
OS GSO ISO 7270-1:2015 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 1: Identification of polymers (single polymers and polymer blends)
BH GSO ISO 20795-1:2017 Dentistry -- Base polymers -- Part 1: Denture base polymers
OS GSO ISO 20795-2:2015 Dentistry -- Base polymers -- Part 2: Orthodontic base polymers
GSO ISO 6656:2015 Animal and vegetable fats and oils -- Determination of polyethylene-type polymers
GSO ISO 182-4:2015 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 4: Potentiometric method
BH GSO ISO 182-4:2016 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 4: Potentiometric method
OS GSO ISO 6656:2015 Animal and vegetable fats and oils -- Determination of polyethylene-type polymers
GSO ISO 80000-12:2022 Quantities and units — Part 12: Condensed matter physics
BH GSO ISO 80000-12:2023 Quantities and units — Part 12: Condensed matter physics
BH GSO ISO 17304:2017 Dentistry -- Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
GSO ISO 17304:2016 Dentistry -- Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
OS GSO ISO 17304:2016 Dentistry -- Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
GSO ISO 20795-2:2015 Dentistry -- Base polymers -- Part 2: Orthodontic base polymers
OS GSO ISO 2028:2015 Synthetic rubber latex -- Preparation of dry polymer
GSO ISO 2028:2015 Synthetic rubber latex -- Preparation of dry polymer

Korean Agency for Technology and Standards (KATS)

KS P ISO 17190-10-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 10：Determination of extractable polymer content by potentiometric titration
KS C 3904-2023 Polymer bushing for distribution lines
KS F 2475-1987 METHOD OF TEST FOR UNIT WEIGHT AND AIR CONTENT (GRAVIMETRIC)OF FRESH POLYMER-MODIFIED MORTAR
KS C 3904-2003 Polymer bushing for distribution lines
KS C 8569-2015 Polymer electrolyte fuel cell(PEFC) system
KS F 2475-1987(1997) METHOD OF TEST FOR UNIT WEIGHT AND AIR CONTENT (GRAVIMETRIC)OF FRESH POLYMER-MODIFIED MORTAR
KS M 3826-1993 Determination of Chlorine in Chlorine-containing Polymers,Copolymers and their Compounds
KS P ISO 17190-10:2011 Urine-absorbing aids for incontinence-Test methods for characterizing polymer-based absorbent materials-Part 10:Determination of extractable polymer content by potentiometric titration
KS M ISO 7270-1-2007(2017) Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-2:2011 Dentistry－Base polymers－Part 2：Orthodontic base polymers
KS F 4911-2017 Waterproofing sheets of synthetic polymer
KS M ISO 7270-1-2007(2022) Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-1:2020 Dentistry — Base polymers — Part 1: Denture base polymers
KS F 4911-2023 Waterproofing sheets of synthetic polymer
KS F 4911-1984 Waterproofing sheets of synthetic polymer
KS P ISO 20795-2-2011(2016) Dentistry－Base polymers－Part 2：Orthodontic base polymers
KS M ISO 7270-1:2007 Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-1:2010 Dentistry-Base polymers-Part 1:Denture base polymers
KS P ISO 20795-2:2021 Dentistry — Base polymers — Part 2: Orthodontic base polymers
KS P ISO 20795-1:2014 Dentistry－Base polymers－Part 1：Denture base polymers
KS P 5304-2003 Dentistry－Synthetic polymer teeth
KS P 5304-1986 Dentistry－Synthetic polymer teeth
KS H ISO 6656:2008 Animal and vegetable fats and oils-Determination of polyethylene-type polymers
KS A ISO 80000-12:2017 Quantities and units－Part 12：Solid state physics
KS H ISO 6656-2023 Animal and vegetable fats and oils－Determination of polyethylene-type polymers
KS A ISO 80000-12:2020 Quantities and units — Part 12: Condensed matter physics
KS F 4911-2019 Waterproofing sheets of synthetic polymer
KS M 3812-2007 WATERPROOFING SHEETS OF RECYCLED SYNTHETIC POLYMER
KS M ISO 10352:2012 Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS H ISO 6656-2008(2018) Animal and vegetable fats and oils－Determination of polyethylene-type polymers
KS P ISO 13781:2019 Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing
KS P ISO 17190-10:2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 10:Test method for determination of extractable polymer content by potentiometric titration
KS F 4916-2009 Polymer for cement modifiers
KS P ISO 17304:2017 Dentistry ─ Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
KS M ISO 2028:2010 Synthetic rubber latex－Preparation of dry polymer
KS C IEC 62321-5-2019 Determination of certain substances in electrotechnical products — Part 5: Cadmium, lead and chromium in polymers and electronics Part 5: Cadmium, lead and chromium in polymers and electronics
KS C 4808-2011(2021) Polymer-housed metal-oxide surge arresters without gaps for distribution line
KS M 3156-1997 Plasticized polyvinyl chloride compounds
KS P ISO 14233:2020 Dentistry — Polymer-based die materials
KS F 4916-2016 Polymer for cement modifiers
KS K 3156-1987 Plasticized polyvinyl chloride compound
KS F 2475-2002 METHOD OF TEST FOR UNIT WEIGHT AND AIR CONTENT (GRAVIMETRIC)OF FRESH POLYMER-MODIFIED MORTAR

Association Francaise de Normalisation

NF T51-785-4:1994 PLASTICS. DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES. PART 4 : POTENTIOMETRIC METHOD.
NF EN ISO 20795-2:2013 Oral medicine - Base polymers - Part 2: polymers for orthodontic base
NF EN ISO 20795-1:2013 Oral medicine - Basic polymers - Part 1: polymers for denture bases
NF EN ISO 80000-12:2019 Quantities and units - Part 12: condensed matter physics
NF S91-213:1996 Dentistry. Synthetic polymer teeth.
NF X02-300-12*NF EN ISO 80000-12:2019 Quantities and units - Part 12 : condensed matter physics
NF S91-229*NF EN ISO 17304:2014 Dentistry - Polymerisation shrinkage : method for determination of polymerisation shrinkage of polymer-based restorative materials
NF T51-785-4*NF EN ISO 182-4:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4 : potentiometric method
NF T60-240*NF ISO 6656:2003 Animal and vegetable fats and oils - Determination of polyethylene-type polymers
NF EN 13632:2010 Bitumens and bituminous binders - Visualization of polymer dispersion in polymer-modified bitumens
NF ISO 6656:2003 Fats of animal and vegetable origin - Dosage of polyethylene type polymers
NF T51-052*NF ISO 1148:1988 Plastics. Aqueous dispersions of polymers and copolymers. Determination of ph.
NF T51-054:1968 Plastics. Aqueous dispersions of polymers and copolymers. Dry extract at 105 degrees C.
NF ISO 1148:1988 Plastics - Aqueous dispersions of polymers and copolymers - Determination of pH
NF T51-251:1984 Plastics. Aqueous dispersions of polymers and copolymers. Measurement of density.

GM North America

GM 9985574-1994 Adhesive, Urethane, Polymer
GM 9985573-1994 Adhesive, Urethane, Polymer
GM 9985042-1994 Adhesive - ABS Polymer
GM GMP.POM.010-1994 Acetal - Homopolymer, Alloy
GM 9986047-1995 Polyurethane Isocyanate, Low Density Polymer

KR-KS

KS C 3904-2003(2023) Polymer bushing for distribution lines
KS M ISO 7270-1-2023 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
KS P ISO 20795-1-2020 Dentistry — Base polymers — Part 1: Denture base polymers
KS P ISO 20795-2-2021 Dentistry — Base polymers — Part 2: Orthodontic base polymers
KS A ISO 80000-12-2020 Quantities and units — Part 12: Condensed matter physics
KS P ISO 13781-2019 Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing
KS H ISO 6656-2008(2023) Animal and vegetable fats and oils－Determination of polyethylene-type polymers
KS P ISO 17190-10-2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 10:Test method for determination of extractable polymer content by potentiometric titration
KS P ISO 17304-2022 Dentistry Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer based restorative materials
KS M ISO 3012-2003(2023) Gasoline, kerosene and distillate fuels - Mercaptan sulfur content test method - Potentiometer method
KS P ISO 17304-2017 Dentistry ─ Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials

PL-PKN

PN E04421-1990 Measurement of the average viscometric degree of polymerization of new and aged electrical papers
PN E29200-1973 Compounds of polyvinyl chloride for electric cables
PN E04160-68-1988 Electric cables Methods of test Electrical test of conducting polymeric screen
PN C89102-1973 Polymeres Oefinitions of ?erms
PN C89061-1987 Homopolymer and copolymer resins of styrene Determination of residual monomers and compounds don't underego polymerisation by gas chromatographic method
PN C89299-1991 Plastics. Unplasticized compounds of homopolymers and copolymers of vinyl chloride. Designation

IET - Institution of Engineering and Technology

ELEC DEGRAD BRKDWN POLY-1992 Electrical Degradation and Breakdown in Polymers

SAE - SAE International

SAE AS22759C-2014 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759A-A1-2008 Wire@ Electrical@ Fluoropolymer-Insulated@ Copper or Copper Alloy
SAE AS22759-A1-2005 Wire@ Electrical@ Fluoropolymer-Insulated@ Copper or Copper Alloy
SAE J2016-2008 Chemical Stress Resistance of Polymers
SAE J2016-1989 Chemical Stress Resistance of Polymers@ Recommended Practice

IPC - Association Connecting Electronics Industries

IPC TM-650 2.6.14A-1987 Resistance to Electromigration@ Polymer Solder Mask
IPC TM-650 2.5.6.1A-1988 Dielectric Strength@ Polymer Solder Mask@ and/or Conformal Coatings

Defense Logistics Agency

DLA DSCC-DWG-04002 REV A-2009 CAPACITORS, TANTALUM, HYBRID, POLYMER CASE, SEALED
DLA DSCC-DWG-04002-2004 CAPACITORS, TANTALUM, HYBRID, POLYMER CASE, SEALED

Society of Automotive Engineers (SAE)

SAE AS22759-2001 Wire, electrical, fluoropolymer-insulated, copper or copper alloy
SAE AS22759B-2011 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759D-2018 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759_A1-2005 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759A_A1-2008 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS81044B-2019 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarylene Insulated, Copper or Copper Alloy
SAE AS81044_A1-2004 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, Or Polyarlyene Insulated, Copper Or Copper Alloy
SAE AS22759A-2006 (R) Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS81044_A2-2008 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
SAE AS81044-2004 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
SAE AS81044A-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
SAE AMS3266-1989 Sealing Compound, Polythioether Elastomeric Two Part Electrically Conductive
SAE AMS3266B-2022 Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive
SAE ARP6167-2013 Etching of Fluoropolymer Insulations
SAE AMS-DTL-23053/13A-2012 Insulation Sleeving, Electrical, Heat Shrinkable, Fjuoroelastomer, Flexible

Electronic Components, Assemblies and Materials Association

EIA_ECA-956-2006 Aluminum Electrolytic Chip Capacitor with Polmer Cathode
EIA/ECA-956-2006 Aluminum Electrolytic Chip Capacitor with Polmer Cathode
EIA/ECA-955-2007 SURFACE MOUNT ALUMINUM ELECTROLYTIC CHIP CAPACITOR WITH POLYMER CATHODE (QUALIFICATION SPECIFICATION)
EIA/ECA-953-2006 Molded Tantalum Chip Capacitor with Polymer Cathode
EIA_ECA-953-2006 Molded Tantalum Chip Capacitor with Polymer Cathode

BELST

STB 1072-97 Polymer-mineral compounds. Specifications

United States Navy

NAVY QPL-AS22759-1-2005 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY [Superseded: NAVY QPL-22759 -42 CANC NOTICE 1, NAVY QPL-22759 -42, NAVY QPL-22759 -41, NAVY QPL-22759 -40, NAVY QPL-22759 -39, NAVY QPL-22759 -38, NAVY QPL-22759 -37, NAVY QPL-2275
NAVY QPL-AS81044-QPD-2012 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
NAVY UFGS-35 59 13.14 20-2010 POLYMERIC FENDER PILES
NAVY QPL-AS81044-17-2007 WIRE, ELECTRICAL, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARLYENE INSULATED, COPPER OR COPPER ALLOY [Superseded: NAVY QPL-81044 -17 CANC NOTICE 1, NAVY QPL-81044-17, NAVY QPL-81044-16, NAVY QPL-81044-15, NAVY QPL-81044-14, NAVY
NAVY MIL-P-82658 (1)-1978 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED
NAVY MIL-P-82658-1977 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED
NAVY QPL-AS81044-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
NAVY QPL-AS81044-QPD-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
NAVY MIL-DTL-82633 A-2011 COMPOUND, POLYMERIC ELASTOMER, THERMOSETTING

RO-ASRO

STAS 10401/3-1976 BLENDED POLYMER AND SYNTHETIC POLYMER ELECTROPILE AND PILE IMITATION FUR Minimum fastnesses of colours and prints
STAS R 12729-1989 PLASTICS Symbols for synthetic polymers
STAS 11476-1981 UNWOVEN TEXTILE MATERIALS OF COTTON, MIXTURES NATURAL AND SYNTHETIC POLYMERES ND POLYMER MIXTURES inimum colour and printing fastness
SR ISO 305:1995 Plastics - Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compourids - Discoloration method
STAS 7397-1973 POLYVINYL CHLORIDE TYPE GE

Japanese Industrial Standards Committee (JISC)

JIS T 6506:1998 Synthetic polymer teeth
JIS T 6506:2005 Synthetic polymer teeth
JIS K 6231:1998 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
JIS K 7229:1995 Determination of chlorine in chlorine-containing polymers, copolymers and their compounds
JIS A 6008:2022 Roofing sheets of synthetic polymer
JIS K 6231:2004 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
JIS Z 8000-12:2022 Quantities and units -- Part 12: Condensed matter physics
JIS C 8832:2008 Performance test for stationary polymer electrolyte fuel cell stack
JIS A 6203:2015 Polymer dispersions and redispersible polymer powders for cement modifiers
JIS A 6203:1996 Polymer dispersions and redispersible polymer powders for cement modifiers
JIS A 6203:2000 Polymer dispersions and redispersible polymer powders for cement modifiers
JIS A 6008:2002 Roofing sheets of synthetic polymer
JIS K 6723:1995 Plasticized polyvinyl chloride compounds

International Organization for Standardization (ISO)

ISO 182-4:1993 Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures; part 4: potentiometric method
ISO 7270:1987 Rubber; Identification of polymers (single polymers and blends); Pyrolytic gas chromatographic method
ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
ISO 17190-10:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10: Determination of extractable polymer content by potentiometric titration
ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
ISO 7270-1:2020 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
ISO 7270-1:2003 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends)
ISO 20795-2:2010 Dentistry — Base polymers — Part 2: Orthodontic base polymers
ISO 5475:1978 Rubber — Identification of polymers — Pyrolytic/gas chromatographic method — Single polymers
ISO 80000-12:2019 Quantities and units — Part 12: Condensed matter physics
ISO 7270-1:2003/Amd 1:2010 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends); Amendment 1
ISO 3336:1993 Dentistry; synthetic polymer teeth
ISO 305:1976 Plastics — Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compounds — Discoloration method
ISO 2898-2:1989 Plastics; plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P); part 2: preparation of test specimens and determination of properties
ISO 6656:1984 Animal and vegetable fats and oils; Determination of polyethylene-type polymers
ISO 6656:2002 Animal and vegetable fats and oils - Determination of polyethylene-type polymers
ISO 2028:1999 Synthetic rubber latex - Preparation of dry polymer
ISO 305:1990 Plastics; determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds; discoloration method
ISO 2028:1974 Title missing - Legacy paper document
ISO 17190-10:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 10: Test method for determination of extractable polymer content by potentiometric titration
ISO 20795-1:2008/Cor 1:2009 Dentistry - Base polymers - Part 1: Denture base polymers; Technical Corrigendum 1
ISO 2028:2015 Synthetic rubber latex - Preparation of dry polymer
ISO 17304:2013 Dentistry.Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
ISO 2898-1:1986 Plastics; Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P); Part 1 : Designation

Danish Standards Foundation

DS/ISO 17190-10:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10: Determination of extractable polymer content by potentiometric titration
DS/EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
DS/EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
DS/ISO 7270:1988 Rubber. Identification of polymers (single polymers and blends). Pyrolytic gas chromatographic method
DS/ISO 17190-10:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 10: Test method for determination of extractable polymer content by potentiometric titration
DS/IEC 455-2:1985 Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 2: Methods of test with amendment No.1 (1982)
DS/EN ISO 182-4:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method
DS/EN 13632:2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen

CZ-CSN

CSN 64 0751-1981 Testing of plastics. Determination of hermal stability of póly (vinylchloride) nd of its mixtures by the continuous otentiometric method
CSN 64 9013-1992 Aqueous dispersions of polymers and copolymers. Determination of stability of dispersion after addition of an electro- yte
CSN 64 9005-1985 Aqueous dispursions of polymers ind copolymers ensile test
CSN 64 9004-1982 Aqueous dispersions of polymers and opolymers etermination of pH
CSN 64 9007-1986 Aqueous dispersions of polymers nd copolymers etermination of foaming
CSN 80 0525-1993 Testing of polymer film tapes
CSN 64 9008-1986 Aqueous dispersions of homopolyntors nd copolymers. Detormination of oagulum and rough admixtures- ontent by sievo analysis
CSN 64 0750-1974 Deteiiňination of thermal stability o? vinyl- hloride polymers and related copolymers y the conductometric method

YU-JUS

JUS G.E0.049-1977 Product on polymer bases. Measurement of resistivity on conducting and antistatic test pieces from polimeric materials
JUS G.E0.050-1977 Products on polymer bases. Antistatic and conductive products determination of electrical resistance
JUS N.A8.221-1993 Solventless polymerisable resinous compounds for electrical purposes - Methods of test

German Institute for Standardization

DIN EN ISO 20795-1:2009 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008); English version of DIN EN ISO 20795-1:2009-02
DIN EN ISO 20795-1:2013-06 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013); German version EN ISO 20795-1:2013
DIN EN ISO 20795-2:2013-06 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013); German version EN ISO 20795-2:2013
DIN VDE 0207-6:2004 Insulating and sheathing compounds for cables and flexible cords - Fluorinated polymers
DIN EN ISO 182-4:2001-02 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993); ...
DIN EN ISO 182-4:2001 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993); Ger
DIN EN ISO 17304:2014-03 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013); German version EN ISO 17304:2013
DIN 7724:1993 Polymeric materials; grouping of polymeric materials based on their mechanical behaviour
DIN EN 13632:2010-11 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen; German version EN 13632:2010
DIN 13998:2012 Dentistry - Test method for the bonding test between polymer teeth and denture base polymer
DIN VDE 0816-1:1988 External cables for telecommunication and data processing systems; cables insulated and sheathed with polyethylen, unit stranded
DIN ISO 2028:2004 Synthetic rubber latex - Preparation of dry polymer (ISO 2028:1999)
DIN 65262-1:2017 Aerospace series - Sealing compounds - Part 1: Polysulphide polymer base, Technical specification; Text in German and English

American National Standards Institute （ANSI)

ANSI/EIA 956:2006 Aluminum Electrolytic Chip Capacitor with Polymer Cathode
ANSI/ADA 12-2002 Denture Base Polymers
ANSI/ADA 139-2012 Dental Base Polymers
ANSI/ASTM D5260:1997 Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinatd Poly(Vinyl Chloride) (CPVC) compounds, Classification for (08.03)
ANSI/ASTM D5138:1999 Specification for Liquid Crystal Polymers (08.03)

European Committee for Standardization (CEN)

EN ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers
EN ISO 10352:1997 Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area
EN ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
EN ISO 305:1999 Plastics - Determination of Thermal Stability of Poly (Vinyl Chloride), Related Chlorine-Containing Homopolymers and Copolymers and Their Compounds - Discoloration Method
EN ISO 17304:2013 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
CEN/TS 19101:2022 Design of fibre-polymer composite structures

ES-AENOR

UNE 53-299 Pt.1-1985 Uses of plasticizing compounds for polyvinyl chloride copolymers and homopolymers
UNE 53-299 Pt.2-1985 Determination of the properties of plasticizing compounds of polyvinyl chloride copolymers and homopolymers

Underwriters Laboratories (UL)

UL 83A-2021 UL Standard for Safety Flouropolymer Insulated Wire

ICEA - Insulated Cable Engineers Association Inc.

T-33-655-1994-1994 Low-Smoke@ Halogen-Free (LSHF) Polymeric Cable Jackets

American Society for Testing and Materials (ASTM)

ASTM D5260-04 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-22 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-97 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-16 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM D1784-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-04(2010) Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D2287-12 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM D2287-81(1988)e1 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM D2287-11 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM D7258-23 Standard Specification for Polymeric Piles
ASTM UOP269-10 Nitrogen Bases in Hydrocarbons by Potentiometric Titration
ASTM D2287-96(2010) Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
ASTM D2305-02 Standard Test Methods for Polymeric Films Used for Electrical Insulation
ASTM UOP269-90 Nitrogen Bases in Hydrocarbons by Potentiometric Titration
ASTM D7173-14 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
ASTM E1428-15a Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
ASTM F1925-22 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
ASTM F2026-07 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2820-12(2021)e1 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM F1579-02 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
ASTM F2820-12 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM F2026-12 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0207-6-2004 Insulating and sheathing compounds for cables and flexible cords - Fluorinated polymers

US-FCR

FCR UFGS-35 59 13.14 20-2010 POLYMERIC FENDER PILES

American Concrete Institute

ACI SP-137-1993 Polymer Concrete

BR-ABNT

ABNT NBR 15723-4-2020 Implants for surgery - Polymeric materials Part 4: Requirements for porous polyethylene polymers
ABNT NBR 15723-3-2020 Implants for surgery - Polymeric materials Part 3: Requirements for polyaryletherketone (PAEK) polymers

(U.S.) Ford Automotive Standards

FORD WRS-M1H1229-A-2012 FABRIC, OMNI PATTERN, FLAT WOVEN 45% PIR/PCR UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WRS-M1H1230-A-2011 FABRIC, OMNI 100 PATTERN, WOVEN 100% PIR/PCR UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M2C183-A-1985 LUBRICANT, MULTI-PURPOSE, POLYMER
FORD M2C183-A-2009 LUBRICANT, MULTIPURPOSE, POLYMER
FORD FLTM BN 112-03-2006 DEGREE OF SOIL TRANSFER TO LEATHER AND POLYMERIC FABRIC''''S

ES-UNE

UNE-EN ISO 80000-12:2021 Quantities and units - Part 12: Condensed matter physics (ISO 80000-12:2019, Corrected version 2021-11)

U.S. Military Regulations and Norms

ARMY MIL-C-47175 A VALID NOTICE 4-2013 Compound, Polyurethane, for Conformal Coating of Electronic Circuitry
ARMY MIL-C-47175 A (2)-1999 COMPOUND, POLYURETHANE, FOR CONFORMAL COATING OF ELECTRONIC CIRCUITRY
ARMY MIL-C-47175 A VALID NOTICE 3-2004 COMPOUND, POLYURETHANE, FOR CONFORMAL COATING OF ELECTRONIC CIRCUITRY
ARMY MIL-C-47175 A-1980 COMPOUND, POLYURETHANE, FOR CONFORMAL COATING OF ELECTRONIC CIRCUITRY
ARMY MIL-C-47175 A VALID NOTICE 1-1990 COMPOUND, POLYURETHANE, FOR CONFORMAL COATING OF ELECTRONIC CIRCUITRY
ARMY MIL-C-47175 A NOTICE 2-1996 COMPOUND, POLYURETHANE, FOR CONFORMAL COATING OF ELECTRONIC CIRCUITRY

AENOR

UNE-EN ISO 182-4:2001 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method. (ISO 182-4:1993)
UNE-EN 13632:2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
UNE-EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013)
UNE-EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013)

ZA-SANS

SANS 1042:2006 Polymer floor dressings
SANS 861:2008 Dentistry - Denture base polymers

GM Europe

GME QK 000577-1988 Polymer blend from polypropylene and EPDM Polyblend from Polypropylene and EPDM English/German
GME QK 001226-2002 Blend from Polyamide 66, Polyamide 6 and Polyethylene Blend from Polyamide 66, Polyamide 6 and Polyethylene English/German
GME QK 000577-2011 Polymer blends made of polypropylene and EPDM (revision 2; English/German)
GME QK 001807-2003 Blend of propylene-ethylene copolymer and EPDM Blend from Polypropylene-Ethylene-Copolymer and EPDM
GME QK 000732-2010 Liquid Crystalline Polymer (English/German)

GM Daewoo

GMKOREA EDS-M-4642-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend for Metal Plating

GB-REG

REG NASA-STD-8739.1 REV A CHG 1-2009 WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES
REG NASA-STD-8739.1 REV A W/CHG 2-2011 WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES

AASHTO - American Association of State Highway and Transportation Officials

T 302-2004 Standard Method of Test for Polymer Content of Polymer-Modified Emulsions and Asphalt Binders
T302-1994 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Nineteenth Edition)
T302-1995 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Eighteenth Edition)

Lithuanian Standards Office

LST EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013)
LST EN ISO 182-4:2003 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993)
LST EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013)
LST EN 13632-2010 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
LST EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2010)
LST EN ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008)

National Aeronautics and Space Administration (NASA)

NASA-STD-8739.1 REV A-2008 WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES

The American Road & Transportation Builders Association

AASHTO T 302-2005 Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
AASHTO T302-1999 Standard Method of Test for Polymer Content of Polymer-Modified Emulsions Twentieth Edition

DIN

DIN EN 13632:2004 Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen

CEN - European Committee for Standardization

EN ISO 305:2019 Plastics - Determination of thermal stability of poly(vinyl chloride)@ related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4.50-1995 Thermal Conductivity, Polymer Films
IPC TM-650 2.5.5.8-1995 Low Frequency Dielectric Constant and Loss Tangent, Polymer Films

ACI - American Concrete Institute

ACI SP-99-1987 Polymer Modified Concrete
ACI 548.3R-2003 Polymer-Modified Concrete
ACI 548R-1977 Polymers in Concrete

TR-TSE

TS 2330-1976 PLASTICS - AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS - DETERMINATION OF WHITE POINT TEMPERATURE

IT-UNI

UNI 5818-1966 Plastic material testing. Determination of chlorine in polymers and copolymers of polyvinyl chloride

IN-BIS

IS 13465 Pt.3/Sec.4-1992 Solvent-free polymeric resin compounds for electrical insulation—Specifications Part 3 Individual Material Specifications Section 4: Filled Polyurethane Compounds

SE-SIS

SIS 16 67 11-1968 Polyester moulding compounds (alkyd moulding compounds)
SIS SS-ISO 1148:1988 Plastics — Aqueous dispersions of polymers and copolymers — Determination of pH

Others: potential zeta potential,Oxygen Potential,Potential + Equilibrium Potential,Potential,Equilibrium Potential,Electrode Potential,Potential + Polarization Potential,Polarization Potential,Electrode Potential,Polarization Potential,Polarization Potential,spike potential,zeta potential potential,corrosion potential,zeta potential potential,polymer potential,potential + electrode potential,over potential,working potential