Method lower limit of determination

Method lower limit of determination, Total:58 items.

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10069.2-1988 Measurement of dirborne noise emitted by rotating electrical machinery and the noise limits-Survey method for the measurement of airborne noise
GB/T 42368-2023 Determination of explosion limits of combustible vapors and gases at elevated temperature and pressure
GB/T 14438-1993 Lower confidence limit of normal probability within specified limits
GB/T 16425-1996 Determination for minimum explosive concentration of dust cloud
GB/T 10069.1-1988 Measurement of airborne noise emitted by rotating electrical machinery and the noise limits-Engineering method for the measurement of airborne noise
GB 10068.2-1988 Measurement evaluation and limits of the vibration severity of rotating electrical machinery--Limits of the mechanical vibration severity
GB/T 15459-2006 Determination of shatter indices of coal
GB 12021.5-1989 The limited value of energy consumption and method of testing for electrical iron
GB 12021.9-1989 The limited value of energy consumption of electric fans and its measuring method
GB 10069.3-1988 Measurement of airborne noise emitted by rotating electrical machinery and the noise limits-Noise limits

GB/T 16425-2018 Determination for minimum explosive concentration of dust clouds

MT/T 811-1999 Method for evaluating the lower limit of gravity separation for coal cleaning equipment(I)
MT/T 1-2007 Determination of refuse-content and undersize fraction of commercial coal
MT/T 837-1999 Method of determining the minimum oxygen content concentration for coal dust explosion
MT/T 836-1999 Method of determining the minimum explosion concentration for methane and coal dust mixtures
MT/T 1-1996 Determination method of gangue content rate and lower limit rate of commercial coal

DB42/T 2047-2023 Determination of copper, zinc, chromium, nickel, lead and cadmium in waste gas from stationary pollution sources Atomic absorption spectrophotometry

T/CHES 53-2021 Technical guidelines for preparation of standards for water quality monitoring and analysis methods

HJ 168-2010 Environmental monitoring-Technical guideline on drawing and revising analytical method standards
HJ 684-2014 Stationary source emission-Determination of beryllium -Graphite

DB37/T 4432-2021 Stationary source emission—Determination of volatile fatty amines—Gas chromatography

SL/T 113-2014 Calibration method of photoelectric liquid plastic limit measuring instrument

SL 113-2014 Code for calibration of photoelectric fall cone liquid limit and plastic limit device
SL 113-1995 Calibration method for photoelectric liquid-plastic tester

DIN 32645:2008-11 Chemical analysis - Decision limit, detection limit and determination limit under repeatability conditions - Terms, methods, evaluation
DIN 32645:2008 Chemical analysis - Decision limit, detection limit and determination limit under repeatability conditions - Terms, methods, evaluation
DIN 32645:1994 Chemical analysis; decision limit; detection limit and determination limit; estimation in case of repeatability; terms, methods, evaluation

GOST 4071.2-1994 Insulating refractory products. Determination of cold compressive strength
GOST 29234.4-1991 Moulding sands. Method for determination of compressive strength in damp state
GOST 4071.2-2021 Insulating refractory products. Determination of cold compressive strength at room temperature
GOST 15613.4-1978 Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending
GOST 4071.1-1994 Refractory products with a true porosity of less than 45%. Determination of cold compressive strength
GOST 3594.7-1993 Moulding refractory clays. Method for determination of compression strength limit in wet state
GOST 4071.1-2021 Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature
GOST 13648.2-1968 Board. Method of breaking stress and bending strength determination
GOST 3594.6-1993 Moulding refractory clays. Method for the determination of compression strength limit in dry state

CSN 83 2062-1986 Safety of work. Air — dust mixtures. Me- thod of the lower explosive limit determi- nation

ASTM E2472-06 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions

TCVN 4197-2012 Soils.Laboratory methods for determination of plastic limit and liquid limit
TCVN 3792-1983 Lubricants.Method for determination of limit of firmness

BS DD 185:1990 Method for determination of creep stiffness of bitumen aggregate mixtures subject to unconfined uniaxial loading
AENOR UNE-EN 10314:2016 Method for determining the minimum values of the conventional elastic limit of steels at elevated temperatures.
AASHTO T 89-2022 Standard Method of Test for Determining the Liquid Limit of Soils
AASHTO T 89-2013(2021) Standard Method of Test for Determining the Liquid Limit of Soils

SNI 19-6408-2000 Methods for determination of number to be considered in specified limiting values
SNI 1967-2008 Testing methods for determination of liquid limit of soils

IS 2720 Pt.5-1985 Soil Test Methods Part 5 Determination of Liquid Limit and Plastic Limit

IRAM 10 513-1958 Manual method for determination of liquid limit of disturbed soil

ISO 22889:2007 Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint (Second Edition)
ISO/CD 20122 Vegetable oils — Determination of mineral oil saturated hydrocarbons (MOSH) and aromatic hydrocarbons (MOAH) with online coupled HPLC-GC-FID analysis — Method for low limit of quantification

AASHTO T 89-2010 Standard Method of Test for Determining the Liquid Limit of Soils
AASHTO T 89-2013(R2017) Standard Method of Test for Determining the Liquid Limit of Soils
AASHTO T 89-2017 Standard Method of Test for Determining the Liquid Limit of Soils
AASHTO T 89-2013 Standard Method of Test for Determining the Liquid Limit of Soils