Stone Mechanical Properties

Stone Mechanical Properties, Total:103 items.

The international standard classification for "Stone Mechanical Properties" includes: Equipment for the chemical industry , Cement. Gypsum. Lime. Mortar , Mechanical testing of metals , Textiles in general , Timber structures , Wood-based panels , Plastics , Accessories for lifting equipment , Reinforced plastics .

The Chinese standard classification for "Stone Mechanical Properties" includes: Non-metal chemical machinery equipment , Gypsum product , Metal mechanical property test method , Basic standards and general methods , Timber engineering , Timber and processed timber , Basic standards and general methods for synthetic resin and plastic , Hoisting machinery , Fibre reinforced composites , Basic standard and general method on forestry , Raw bamboo and bamboo wood .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10623-1989 Metallic materials--Terms of mechanical test
GB/Z 32009-2015 New textile materials―Datasheet of mechanical properties
GB/T 10051.1-2010 Lifting hooks - Part 1：Mechanical properties, lifting capacities, stresses and materials
GB/T 38515-2020 The method for high temperature mechanical properties of quartz fabric-reinforced resin matrix composite materials
GB/T 13465.1-2002 Test method of mechanical properties of impermeable graphite materials-General
GB/T 41641-2022 Mechanical properties measurement—Room temperature tensile test on REBCO wires
GB/T 28986-2012 Specification for evaluation of structural composite lumber products
GB/T 10623-2008 Metallic material - Mechanical testing - Vocabulary
GB/T 17669.3-1999 Gypsum plasters - Determination of mechanical properties
GB/T 29418-2012 Test methods for mechanical and physical properties of wood-plastic composite product
GB/T 30022-2013 Test Method for Basic Mechanical Properties of Fiber Reinforced Polymer Bar
GB/T 28993-2012 Standard test methods for mechanical properties of structural lumber
GB/T 13465.1-2014 Test method of impermeable graphite materials―Part 1:General of test method for mechanical properties

Professional Standard - Forestry

LY/T 1350-1999 Test methods for physical and mechanical properties of finger-jointed lumber

Professional Standard - Agriculture

GB 11916-1989 Test methods for physical and mechanical properties of finger-jointed materials

Military Standard of the People's Republic of China-General Armament Department

GJB 10246.2-2021 Test methods for mechanical properties of fiber reinforced airgel insulation materials Part 2: Compression properties
GJB/Z 18-1991 Criteria for expression of mechanical properties data of metal materials
GJB/Z 18A-2020 Data processing and expression of mechanical properties of metal materials
GJB 10246.1-2021 Test methods for mechanical properties of fiber-reinforced airgel insulation materials Part 1: Tensile properties
GJB 10246.3-2021 Test methods for mechanical properties of fiber-reinforced airgel insulation materials Part 3: Bending properties

Professional Standard - Aviation

HB 7618-2013 Data expression guidelines for mechanical properties of polymer matrix composites
HB 7618-1998 Data expression guidelines for mechanical properties of polymer matrix composites
HB 5431-1989 Data expression criteria for mechanical properties of metallic materials

Professional Standard - Ferrous Metallurgy

YB/T 5349-2014 Metallic materials. Determination of bending mechanical porperties

Professional Standard - Construction Industry

JG/T 199-2007 Testing methods for physical and mechanical properties of bamboo used in building

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB/Z 18A-2005 Data reduction and presentation of mechanical property for metallic materials

工业和信息化部/国家能源局

JB/T 13225-2017 In-situ testing systems of tensile-indentation combined mechanical properties for solid materials
JB/T 13227-2017 In-situ testing systems of bend-torsional combined mechanical properties for solid materials
JB/T 13223-2017 In-situ testing systems of tensile-bend combined mechanical properties for solid materials
JB/T 13226-2017 In-situ testing systems of fatigue mechanical properties for solid materials
JB/T 13222-2017 In-situ testing systems of tensile-torsional combined mechanical properties for solid materials

Group Standards of the People's Republic of China

T/CAMMT 65-2023 Test method for mechanical properties of ceramic matrix composites at high temperature
T/CSAE 52-2016 Test method of mechanical properties for metallic sheets at high strain rates: Servo-hydraulic and other test systems
T/CIMA 0058-2022 High temperature and high frequency in-situ tester for mechanical properties of solid materials

国家市场监督管理总局、中国国家标准化管理委员会

GB/Z 38434-2019 Metallic materials—Guide to test pieces preparation for mechanical testing
GB/T 40048-2021 Test methods for bolted connections in structural wood and wood-based materials

未注明发布机构

DIN EN ISO 17138:2022 High-performance ceramics – Mechanical properties of ceramic composite materials at room temperature – Determination of flexural strength

国家林业局

LY/T 2917-2017 Standard methods for development of characteristic mechanical values of structural glued laminated timber

Professional Standard - Building Materials

JC/T 2461-2018 Standard test method for the mechanical properties of ductile fiber reinforced cementitious composites

Professional Standard - Railway

TB/T 2412.2-1993 Test Method for Physical and Mechanical Performance of Laminated Bamboo Plate for Railway Truck

工业和信息化部

JB/T 13809-2020 In-situ mechanical testing instruments for solid materials-General specification

HU-MSZT

MSZ 770/5-1983 Brass wire mechanical properties
MSZ 771/5-1979 Mechanical properties of semiconductor materials
MSZ 711/4-1981 Mechanical properties
MSZ 710/5-1979 Mechanical properties of wires
MSZ 770/4-1981 mechanical properties of copper pipe
MSZ 770/3-1980 Brass rod mechanical properties
MSZ 771/3-1980 Mechanical properties of copper-nickel alloy
MSZ 711/2-1982 Mechanical properties of aluminum copper discs
MSZ 710/2-1988 Introduction to the mechanical properties of bronze
MSZ 771/2-1982 Mechanical properties of copper-nickel alloy plates

International Organization for Standardization (ISO)

ISO 3051:1974 Gypsum plasters; Determination of mechanical properties
ISO 4471:1982 Wood; Sampling sample trees and logs for determination of physical and mechanical properties of wood in homogeneous stands
ISO 3537:1999 Road vehicles - Safety glazing materials - Mechanical tests
ISO 3537:2015 Road vehicles - Safety glazing materials - Mechanical tests
ISO 6362-2:2014 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 2: Mechanical properties
ISO 6362-2:1990 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 2: mechanical properties
ISO 6363-2:1993 Wrought aluminium and aluminium alloy; cold-drawn rods/bars and tubes; part 2: mechanical properties
ISO 6362-2:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 2: Mechanical properties
ISO 6363-2:2012 Wrought aluminium and aluminium alloys - Cold-drawn rods/bars and tubes and wires - Part 2: Mechanical properties
ISO 3522:1984 Cast aluminium alloys; Chemical composition and mechanical properties

RU-GOST R

GOST 12288-1966 Mining rocks. Methods for the determination of mechanical properties by punching
GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
GOST R 58022-2017 Polymer composite crossarms. Method for determination of flexural mechanical properties
GOST 28924-1991 Grinding materials. Test methods of physical and physical-mechanical properties
GOST 24038-1990 Asbestos-polymer seal sheet materials. Method of test for compressibility and recoverability

AT-ON

ONORM B 3124 Teil.9-1986 Testing of natural stone; mechanical properties of rock; modulus of elasticity, stress-strain curve and poisson's ratio under uniaxial compressive loading
ONORM B 3127-1953 Natural stone inspection. Impact and compression resistance of gravel*)
ONORM B 3124-5-2000 Testing of natural stone - Mechanical properties of rock - Flexural tensile strength

PL-PKN

PN D04113-1955 Physical and mechanical properties of wood -- Grindability test
PN D04120-1960 Physical and Mechanical Properties of Wood. De?ermining of ?he Hygroscopisify
PN D04106-1954 Physical and mechanical properties of wood -- Test for cleavage
PN D04115-1958 Physical and mechanical properties of wood -- Determination of modulus of elasticity in compression parallel to grain
PN D04119-1959 Physical and mechanical properties of wood -- Determination of water absorption
PN D04116-1959 Physical and mechanical properties of wood -- Determination of bucking strength
PN D04203-1959 Physical and mechanical properties of wood-based materials -- Determination of waviness for coreboards
PN C89103 ArkusZ10-1974 Terminology of plastics Mechanical properties
PN H92741-03-1987 Aluminium and aluminium alloys Sheets Mechanical properties

RO-ASRO

STAS SR ISO 1112:1994 Horology - Fonc?ional and non-fonctional jewels

YU-JUS

JUS B.B7.113-1993 Rock mechanics - Physical and mechanical testing of rocks - Determination of apparent density
JUS B.B7.112-1993 Rock mechanics - Physical and mechanical testing of rocks - Determination of density

British Standards Institution (BSI)

BS ISO 1112:2009 Horology - Functional and non-functional jewels

BR-ABNT

ABNT NBR 6656-2008 Mechanical properties, deep drawability and weldability characteristics of steel plates, coils and plates - Specification
ABNT NBR 6656-2016 Steel plate, coil and sheet with special chracteristic of mechanical properties, drawability and weldability - Requirements

European Committee for Standardization (CEN)

EN 754-2:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
EN 754-2:2013 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
EN 754-2:1997 Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 2: Mechanical Properties
EN 755-2:2013 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 2: Mechanical properties
EN 755-2:1997 Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 2: Mechanical Properties

CEN - European Committee for Standardization

EN 754-2:2008 Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 2: Mechanical Properties
EN 755-2:2008 Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 2: Mechanical properties

CZ-CSN

CSN 72 2605 Z1-1996 Brick test. Mechanical properties
CSN 72 1213-1986 Physical and mechanical tests of limestone

GM Europe

GME GMI R-0-15-1996 Vehicle Performance, Driving Mechanics and Drivability (English/German; ITDC Release, Draft for Harmonization)

American Society for Testing and Materials (ASTM)

ASTM D7031-11 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

Association Francaise de Normalisation

NF T70-363:1996 Energetic materials for defense. Physico-chemical analysis and properties. Freeness. Gravity method.
NF T70-364:2003 Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives.
NF T70-364:2014 Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives

American Concrete Institute

ACI 446.1R-1991 Fracture Mechanics of Concrete: Concepts, Models and Determination of Material Properties

SCC

ASA S2.22-1998(R2020) American National Standard Resonance Method for Measuring the Dynamic Mechanical Properties for Viscoelastic Materials

IT-UNI

UNI 7557-1976 Building materials. Heat generation capacity performance measurement

Danish Standards Foundation

DS/EN 12290:2005 Advanced technical ceramics – Mechanical properties of ceramic composites at high temperature under inert atmosphere – Determination of compression properties