Polystyrene sample cup

Polystyrene sample cup, Total:409 items.

The international standard classification for "Polystyrene sample cup" includes: Thermoplastic materials , food products in general , Adhesives , Raw materials for rubber and plastics , Plastics , Packaging materials and accessories , Plastics pipes , Films and sheets , Plastics in general , Rubber , Other rubber and plastics products , Man-made fibres .

The Chinese standard classification for "Polystyrene sample cup" includes: Synthetic resin and plastic , Food sanitation , Adhesives , Packaging material and container , Plastic profile , Basic standards and general methods for synthetic resin and plastic , Synthetic rubber , Labor safety technology in general , Constructional plastics product , Chemical fibre .

Group Standards of the People's Republic of China

T/CBMF 217-2023 Decorative products made of modified polystyrene foam composite
T/CSRA 21-2022 Determination of plastic composition—Qualitative method of PE,PP,PS,PVC,EVA,PET in plastics
T/CPCIF 0039-2020 Technical specification for green-design product assessment— Polystyrene resin
T/CASME 47-2022 Polystyrene (PS) prism anti glare plate
T/CIPR 064-2022 Styrene-ethylene-ethylene-propylene block copolymer modified foam
T/CSRA 7-2021 Limit of styrene volatilization standards for low styrene emission unsaturated polyester resin
T/ZZB 1652-2020 Disposable serological pipettes（Polystyrene）
T/GZPPIA 01-2018 Polystyrene buoyancy
T/JSBC 4-2020 Recycled polystyrene compound
T/CSTM 00480-2021 Molded polystyrene thermal insulation permanent formwork
T/ZZB 2752-2022 Styrene for polymerization-specificatioan
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/ZZB 0915-2018 Polyethylene terephthalate (PET) disposable cup

工业和信息化部

HG/T 5869-2021 Technical specification for green-design product assessment — Polystyrene resin
JC/T 2387-2016 Decorative products made of EPS compound with PGRC
HG/T 4999-2016 Tristyrylphenol ethoxylates
QB/T 5153-2017 Recycled polystyrene extrusion foaming wire-rod

Professional Standard - Chemical Industry

HG/T 2737-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) ball valve
HG/T 2643-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) diaphragm valve
HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
HG/T 4669-2014 High impact polystyrene (PS-HI) color masterbatch
HG/T 4998~4999-2016 Oleic acid ethoxylates and tristyrylphenol ethoxylates (2016)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12671-2008 Polystyrene (PS) resin
GB 9692-1988 Hygienic STANDARD for polystyrene resin used as food packaging material
GB/T 17338-1998 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging
GB/T 16719-2008 Biaxially oriented polystyrene(BOPS)sheet
GB/T 16867-1997 Determination of residual styrene monomer in polystyrene and acrylonitrile-Butadiene-Styrene resins by gas chromatography
GB/T 5009.60-1996 Method for analysis of hygienic standard of products of polyethylene polystyrene and polypropyrene for food packaging
GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC - C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) f
GB/T 26191-2010 Biaxially oriented polystyrene twist film
GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB 12671-1990 Polystyrene resin
GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
GB/T 27561-2011 Styrene-butadiene-styrene block copolymers(SBS) adhesives
GB/T 5009.60-2003 Method for Analysis of Hygienic Standard of Products of Polyethylene, Polystyrene and Polypropyrene for Food Packaging
GB/T 16719-1996 Biaxially oriented polystyrene (BOPS) sheet
GB 9689-1988 Hygienic STANDARD for polystyrene products used as food containers and table wares
GB/T 5009.152-2003 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for foods pack
GB/T 4614-1984 Determination of residual styrene monomer in polystyrene by gas chromatography
GB/T 26190-2010 Biaxially oriented polystyrene window film
GB 6598-1986 Determination of Weight Average Molecular Weight of Polystyrene Standard Samples by Small Angle Laser Light Scattering Method
GB 31635-2014 Food safety national standard food additives polystyrene

Professional Standard - Petrochemical Industry

SH 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH/T 1590-1994 Styrene-butadiene series impact-resistant polystyrene (SB) resin
SH 1590-1994 Anti-impact resin of styrene-butadiene series
SH/T 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH/T 1610-2001 Styrene-butadiene block copolymer

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I)—Gas chromatography
GB/T 37388-2019 Solution-polymerized styrene butadiene rubber(SSBR)
GB/T 38286-2019 Polyethylene(PE),polypropylene(PP)and polystyrene(PS)resin—Determination of peroxide value
GB/T 37198-2018 Impact-resistant polystyrene(PS-I) resin

Professional Standard - Agriculture

GBn 89-1980 Food packaging material: polystyrene resin

未注明发布机构

DIN EN 13164 Berichtigung 1:2006 Factory Manufactured Extruded Polystyrene Foam (XPS) Products Specification
DIN EN ISO 24022-2 E:2019-04 Plastic polystyrene (draft)
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
CAN/ULC-S701.1:2017 STANDARD FOR THERMAL INSULATION, POLYSTYRENE BOARDS

Professional Standard - Light Industry

QB/T 3807-1999 Cellular plastics. Polystyrene foam for thermal insulation
QB 1110-1991 Safety Procedure in Manufacturing Polyurethane, Polystyrene and Polyethylene Foam Plastic
QB/T 1649-1992 Polystyrene Foam Plastic Packaging Material
QB/T 1869-1993 High impact polystyrene extruded sheet
QB/T 4009-2010 Expandable polystyrene(EPS) resin
QB/T 2029-1994 ABS/PVC Sheet Material

Professional Standard - Building Materials

JC/T 689-1998 Metal skinned EPS Sandwich Panels
JC/T 2458-2018 Polystyrene granule foamed concrete
JC/T 2289-2014 Polystyrene board for drainage and protection

Hebei Provincial Standard of the People's Republic of China

DB/T1300 G32 3-1988 Expandable polystyrene beads

Professional Standard - Commodity Inspection

SN/T 2889-2011 Food contact materials for export. Polymers. Determination of toluene|| ethylbenzene|| propylbenzene|| isopropylbenzene|| styrene and total volatile substances in polystyrene. Gas chromatography method

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1121-2013 SBR Transparent Impact Resin (Butadiene-Styrene Copolymer)

国家建筑材料工业局

JC 689-1998 Metal skinned EPS Sandwich Panels

Taiwan Provincial Standard of the People's Republic of China

CNS 3918-1976 Polystyrene Moulding Materials (for General Use)
CNS 4013-1976 Method of Test for Polystyrene Moulding Materials
CNS 2535-1992 Thermal Insulation Material Made of Polystyrene Foam
CNS 10132-2000 Polystyrene foam for package cushioning

轻工业部

QB 1869-1993 High Impact Polystyrene Extruded Plates

Shanghai Provincial Standard of the People's Republic of China

DB31/ 163-1995 Hygienic standard for expanded polystyrene resin for food packaging

Military Standard of the People's Republic of China-General Armament Department

GJB 8280-2014 Specification for PTFE plate filled with poly (phenyl p-hydroxybenzoate)
GJB/J 5126-2002 Specification for polystyrene particle size reference materials
GJB 8279-2014 Specification for PTFE bar filled with poly (phenyl p-hydroxybenzoate)
GJB 8278-2014 Specification for PTFE pipes filled with poly (phenyl p-hydroxybenzoate)

Professional Standard-Packaging

BB 0007-1995 Packaging container expanded polystyrene lunch box

Professional Standard - Textile

FZ/T 52034-2014 Polyethylene/polyethylene terephthalate (PE/PET) bicomponent composite staple fiber

American Society for Testing and Materials (ASTM)

ASTM D7557-09 Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
ASTM D7557/D7557M-09(2021) Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
ASTM D7557/D7557M-09(2013)e1 Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
ASTM D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D4549-03 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D4026-87(2002)e1 Standard Test Method for Rubber Latex-Styrene-Butadiene Copolymer-Determination of Residual Styrene
ASTM D3314-02(2021) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
ASTM D4026-06(2021) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D2680-95a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D4026-06 Standard Test Method for Rubber Latex8212;Styrene-Butadiene Copolymer8212;Determination of Residual Styrene
ASTM D4026-06(2012) Standard Test Method for Rubber Latexmdash;Styrene-Butadiene Copolymermdash;Determination of Residual Styrene
ASTM D6164-00 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6164-05e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6164/D6164M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6164-05 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6164/D6164M-16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D2121-07 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
ASTM D2121-00 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
ASTM D2680-01(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene &40;ABS&41; and Poly&40;Vinyl Chloride&41; &40;PVC&41; Composite Sewer Piping

RO-ASRO

STAS 7862-1980 POLYSTYRENE
STAS 7459/1-1982 STYRENE-BUTADIENE COPOLY- MERS Delerinination of bound styrene conlvnt
STAS 7861-1980 IMPACT RESISTANT POLYSTYRENE
STAS 9410-1980 SHOCK-RESISTANT POLYSTYRENE PLATES
STAS 10024-1975 ACRYLONITRILE- BUTADIENE - STYRENE COPOLYMER
STAS 7461-1984 Cellular plastics CELL.ULAMR POL YSTYRENE
STAS 10045-1989 PLASTICS Styrefte determination ol polystyrene
STAS 7459/2-1974 Rubbcrs RAW BUTADIENE-STYRENE RUBBER Detcrmination of bound a-methyl styrene monomer content

PL-PKN

PN C89068-1961 Polystyrene. Deferminafion of ?he S?yrene-con?en?s
PN C89292-1971 Polystytene (homopolymer)
PN C89296-1986 Polystyrene expandable Designation
PN C89286-04-1989 Polyethylene Iow densffy Sampling and sample preparation for testing
PN BN 6022-01-1966 Organic products. Styrene
PN C89416-1990 Plastics Determination of resistance of polystyrene and styrene copolymers to attack by trichlorofluoromethane
PN Z04152-02-1986 Air purity protection Tests for styrene Determination of styrene in work places by gas chromatography with sample enrichment

IL-SII

S.I.533-1967 POLYSTYRENE SHEETS
S.I.634-1967 RIGID FOAMED POLYSTYRENE FOR THERMAL INSULATION

Korean Agency for Technology and Standards (KATS)

KS M 3203-1997 POLYSTYRENE SHEETS
KS M 3203-1976 POLYSTYRENE SHEETS
KS M 3203-2003 POLYSTYRENE SHEETS
KS M 3203-2004 POLYSTYRENE SHEETS
KS M ISO 2561-2023 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M 3158-1997 polystyrene molding material
KS M ISO 2561-2013(2018) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M 3011-1990(2001) TESTING METHODS FOR POLYSTYRENES
KS M 3011-1985 TESTING METHODS FOR POLYSTYRENES
KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M 3806-2005 RECYCLED FOAM POLYSTYRENE AGGREAGATE
KS M 3808-2021 Cellular polystyrene(PS) for thermal insulation
KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography
KS F 3125-2000(2010) POLYSTYRENE COMPOSITE WOOD WOOL CEMENT BOARDS
KS F 3125-2013 POLYSTYRENE COMPOSITE WOOD WOOL CEMENT BOARDS
KS M 3807-2003 Recycled foam polystyrene thermal insulation material
KS F 3125-2000 Polystyrene composite wood wool cement boards
KS M 3806-1998(2003) RECYCLED FOAM POLYSTYRENE AGGREAGATE
KS M ISO 2453-2019 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
KS M 3807-2005 Recycled foam polystyrene thermal insulation material
KS M 3808-2020 Cellular polystyrene(PS) for thermal insulation
KS M 3349-1981 Styrene
KS M 3349-2021 Styrene
KS M 3349-2011 Styrene
KS M 3349-2016 Styrene
KS T 1045-2006(2011) Polystyrene foam for package cushioning
KS M 3360-2002 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS

SCC

MIL MIL-B-37405-1976 BEAKER, LABORATORY, CONICAL, POLYSTYRENE, DISPOSABLE (S/S BY A-A-51629A)
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
HOLDEN HN 1854-2009 EXPANDED POLYSTYRENE
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
HOLDEN HN 2198-2014 FOAM - POLYSTYRENE - PPO
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
CAN3-A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives
CAN3 A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives
HOLDEN HN 1459-2001 Polystyrene Moulding Compounds
BS ISO 2561:2006 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
HOLDEN HN 1011-2001 Adhesive Polystyrene Foam
AS A133:1964 Specification for polystyrene wall tiles
CAN/ULC-S701.1:2022 STANDARD FOR THERMAL INSULATION, POLYSTYRENE BOARDS
10/30211408 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ULC 701.1-2017 Standard for Thermal Insulation, Polystyrene Boards
BS 3837:1977 Specification for expanded polystyrene boards
AS K156:1965 Expanded polystyrene for thermal insulation
BS 1493:1967 Specification for polystyrene moulding materials
BS 1493:1958 Specification for polystyrene moulding materials
BS 1493:1948 Specification for polystyrene moulding materials
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
IEC 60275:1968 Polystyrene film dielectric capacitors
BS 3290:1960 Specification for toughened polystyrene extruded sheet
MIL MIL-B-36882-1972 BAG, FOOD SAMPLE, POLYETHYLENE, DISPOSABLE (NO S/S DOCUMENT)
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
HOLDEN HN 2411-2004 ACRYLONITRILE BUTADIENE STYRENE (ABS) AND POLYAMIDE 6 ALLOYS
HOLDEN HN 2411-2012 Acrylonitrile Butadiene Styrene ABS and Polyamide 6 Alloys
AS 2508.3.012:1982 Safe storage and handling information card - Styrene (vinyl benzene, styrene monomer)
BS 3126:1959 Specification for toughened polystyrene moulding materials
AS A134:1964 Specification for adhesives for polystyrene wall tiles
BS 3837:1965 Specification for expanded polystyrene board for thermal insulation purposes
NS 1641:1969 Fish boxes made of expanded polystyrene - Quality requirements
BS 3837-2:1990 Expanded polystyrene boards-Specification for extruded boards
CAN3-A451.1-M86-1986(C2001) Adhesives for polystyrene insulation

GSO

BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BH GSO ISO 2561:2016 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
OS GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
GSO ISO 2453:2015 Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio

British Standards Institution (BSI)

BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS ISO 2561:2023 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
23/30428206 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 24022-2:2020 Plastics. Polystyrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
BS ISO 12418-2:2012 Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates. Preparation of test specimens and determination of properties
BS ISO 21561-2:2016 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR. FTIR with ATR method
BS EN 13164:2012 Thermal insulation products for buildings. Factory made extruded polystyrene foam (XPS) products. Specification
BS EN 13164:2013 Thermal insulation products for buildings. Factory made extruded polystyrene foam (XPS) products. Specification
BS EN 13164:2009 Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
BS EN ISO 1622-2:1999 Plastics - Polystrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN 13164:2012+A1:2015 Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
BS EN ISO 1622-2:1996 Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties

Military Standards (MIL-STD)

DOD A-A-51629 A-1987 CUP, MICRO SAMPLE, AUTOMATED ANALYSIS (CONICAL, POLYSTYRENE, DISPOSABLE) [Use In Lieu Of: DOD A-A-0051629]
DOD A-A-51752-1986 BAG, WATER SAMPLE (POLYETHYLENE, STERILE)

Japanese Industrial Standards Committee (JISC)

JIS K 6872:1995 Polystyrene sheets
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6870:1995 Polystyrene moulding materials
JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
JIS K 6871:1995 Testing methods for polystyrenes
JIS K 6869:1999 Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS Z 1536:1995 Polystyrene foam for package cushioning
JIS K 6727:1977 Styrene

TH-TISI

TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)
TIS 2438-2009 Polystyrene foam mattresses
TIS 836-1988 Standard for polystyrene resin

GM Europe

GME QK 000225-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000223-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000222-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME STD 518783-1996 Cellular plastic 8783 PS+PPO Cellplast 8783 PS+PPO
GME STD 518755-1997 Plastic 8755 PVC/ABS Plast 8755 PVC/ABS English/Swedish
GME QK 006400-1985 Polystyrol-Butadien-Copolymerisat Werkstofftypen Polystyrene-Butadiene-Copolymer Material Types GErman
GME QK 000224-1996 Styrol-Acrylnitril-Copolymerisat mit Glasfasern Styrene-Acrylonitrile-Copolymer with Glass Fibres English Translation Available
GME TM 410100-1982 ABS/PVC-Folie ABS/PVC-Foil German
GME TM 410900-1986 ABS/PVC-Folie ABS/PVC-Foil German
GME TM 410300-1974 ABS/PVC - Folie ABS/PVC - Foil German
GME QK 001254-1997 Blend aus Polyphenylether mit Polystyrol Blend of Polyphenylene Ether and Polystyrene English/German
GME TM 410800-1986 ABS/PVC-Folie ABS/PVC-Foil German
GME B 040 0535-1972 Polystyrene foam (Germany)
GME QK 000217-1984 Schlagfestes Polystyrol (SB) Impact Resistant Polystyrene (SB) German
GME TM 412100-1996 ABS/PVC-Folie ABS/PVC-Foil English/German
GME TM 411700-1996 ABS/PVC-Folie ABS/PVC-Foil English/German
GME QK 000221-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME STD 518736-1996 TPE 8736 SEBS+PP TPE 8736 SEBS+PP English/Swedish
GME QK 000220-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME TM 411500-1981 ABS/PVC-Folie ABS/PVC-Foil German; Includes Appendix
GME TM 410700-1974 ABS/PVC-Folie ABS/PVC-Foil German; Includes Appendix
GME QK 001244-1998 Acrylnitril-Butadien-Styrol-Terpolymerisat Methylmethacrylate-Acrylonitrile-Butadiene-Styrene-Polymer English Translation Available
GME QK 000202-1983 Polystyrol - Formmasse, schlagfest Polystyrene - Moulding Compounds, Impact Resistant German
GME QK 000302-1983 ABS-PVC-Formmasse (Regenerat) ABS-PVC-Compound (Regenerated Material) German
GME QK 001246-1984 ABS/PVC-Blend (Revision 2; English/German; This standard may be applied only for current programs. It is inactive for all future projects and without replacement. If this product should be used for a new project, a Re-Certification according to GMW15702 i
GME QK 000301-1983 ABS-PVC-Compound Folienmaterial ABS-PVC-Compound Foil Material German
GME QK 001248-1988 ABS/PVC-Blend ABS/PVC-Blend English/German
GME QK 001952-2003 ABS ABS English/German
GME QK 001956-2003 ABS ABS English/German
GME QK 001075-2001 Polyethylen Polyethylene
GME QK 001951-2003 ABS ABS English/German
GME TM 411300-1976 ABS-Folie ABS-Foil German
GME QK 000262-1996 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene-Styrene Terpolymer English/German
GME QK 002500-2006 Reinforced blend of acrylonitrile-butadiene-styrene copolymer (ABS) and acrylic-styrene-acrylonitrile (ASA) English/German
GME QK 001249-1993 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene Styrene-Terpolymer English/German
GME QK 000273-1996 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadiene-Styrene-Terpolymer English/German
GME QK 000300-1997 Blend of polyphenylene ether and polystyrene, with fire retardant Blend of polyphenylene ether and polystyrene, with flame retardent English/German
GME QK 001951-2009 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadien-Styrene Terpolymer English/German

Danish Standards Foundation

DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

German Institute for Standardization

DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification

AENOR

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

International Organization for Standardization (ISO)

ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 2453:1975 Styrene-butadiene copolymers — Determination of bound styrene content
ISO/FDIS 2561:2023 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/DIS 2561:1975 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 2561:2006 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:2012 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 2897:1976 Plastics — Designation of impact-resistant polystyrenes

U.S. Military Regulations and Norms

ARMY MIL-P-14571 A-1960 PLASTIC, POLYSTYRENE, MODIFIED; FABRICATED PARTS
ARMY MIL-P-21922 B (1)-1974 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B-1973 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B VALID NOTICE 1-1988 PLASTIC RODS AND TUBES, POLYETHYLENE

GM Holden Ltd

HOLDEN HN 2198-2000 Foam - Polystyrene - PPO

CZ-CSN

CSN 64 3004-1983 Polystyrene - homopoly- mer. Designation
CSN 64 3510 Z1-1995 brick expanded polystyrene
CSN 64 3510-1986 Expanded polystyrene boards
CSN ON 07 7621-1967 filter polystyrene
CSN 64 3008-1985 Expandable polystyrenes Designation
CSN 64 3003-1972 Designation of polystyrene materials
CSN 64 3510 Z2-1996 plastic. brick expanded polystyrene
CSN 64 3003-1985 Impact resistant polystyrenes Designation
CSN 64 3001-1979 Standard polystyrenem Standards oí quality
CSN 64 3002-1979 Impact resistant polystyrenes Standards of quality
CSN 64 3000-1979 Polystyrene thermo- plastics. General requirements
CSN 64 3006-1979 Expanable polystyrenes. General requirements
CSN 35 8325-1975 Polystyrene film dielectric capaoitors
CSN 64 0321-1963 Testing of polystyrene hermoplastics

GOST

GOST 25910-1983 Polystyrene. Designation

Society of Automotive Engineers (SAE)

SAE AMS3620A-1953 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene
SAE AMS3620-1946 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene
SAE AMS3620B-1987 Plastic Moldings and Extrusions-Polystyrene

Indonesia Standards

SNI 06-0176-2000 High impact polystyrene
SNI 06-0175-2002 General purpose polystyrene
SNI 8143.1-2015 Cara uji residu zat kontak pangan dari kemasan pangan - Bagian 1: Residu stirena dalam kemasan pangan polistirena (PS)
SNI 10-6035-1999 Ships' fire retarding steel doors
SNI 7323-2008 Plastic - Tableware - Polystyrene foam

US-FCR

FCR FED PS31-70-1971 POLYSTYRENE PLASTIC SHEET

KR-KS

KS M ISO 2561-2013(2023) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography

RU-GOST R

GOST 12998-1985 Polystyrene film. Specifications
GOST 12851-1987 Polystyrene filaments. Specifications
GOST 15588-2014 Polystyrene insulating slabs. Specifications
GOST 15588-1986 Polystyrene foam boards. Specifications
GOST 12172-1974 Phenol-polivinylacetyl adhesives. Specifications
GOST 12172-2016 Phenol-polyvinylacetyl adhesives. Specifications
GOST 15820-1982 Polystyrole and copolymers of styrole. Gas chromatographic method for determination of resictual monomers and non-polymerizing impurities
GOST 12271-1976 The copolymers of styrene. Specifications
GOST 33929-2016 Concrete with polystyrene aggregates. Specifications
GOST 28250-1989 High-impact polystyrene. Specifications
GOST R 52056-2003 Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications
GOST 20282-1986 General-purpose polystyrene. Specifications
GOST R 51695-2000 Poly(ethylene terephthalate). General specifications
GOST 20326-1974 Disk type milling cutters for cutting organic glass, polyethylene and polysterene. Construction and dimensions

TR-TSE

TS 2610-1977 STYRENE - BUTEDIEN COPOLYMERS - DETERMINATION OF BOUND STYRENE CONTENT
TS 2489-1977 POLYSTYRENE MOULDING MATERIAL
TS 340-1966 PLASTICS DETERMINATION OF THE PERCENTAGE OF STYRENE ?N POLYSTYRENE WITH WIJS SOLUTION
TS 3423-1979 PLASTICS - DESIGNATION OF IMPACT RESISTANT POLYSTYRENES
TS 2492-1977 PLASTICS DETERMINATION OF RESIDUAL STYRENE MONOMER ?N POLYSTYRENE BY GAS CHROMATOGRAPHY

GM Daewoo

GMKOREA EDS-M-4626-2014 Polypropylene and Styrene Butadiene Styrene Copolymer Blend (Version 10; English/Korean)
GMKOREA EDS-M-4624-2014 Polypropylene and styrene, ethylene, butadiene, styrene copolymer blend Shore A 70 (Version 2; English/Korean)
GMKOREA EDS-M-4308-2012 Acrylonitrile-styrene-acrylate copolymer
GMKOREA EDS-M-4315-2012 Blow molding acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-4651-2014 Polypropylene and Styrene Butadiene Styrene Copolymer and EPDM Rubber Blend Shore A 70 (Version 4; English/Korean)
GMKOREA EDS-M-4652-2014 Polypropylene and Styrene Butadiene Styrene Copolymer and EPDM Rubber Blend Shore A 75 (Version 4; English/Korean)
GMKOREA EDS-M-4655-2014 Polypropylene and Styrene Butadiene Styrene Copolymer and EPDM Rubber Blend Shore A 90 (Version 4; English/Korean)
GMKOREA EDS-M-4309-2012 Weather Resistant Acrylonitrile-Butadiene- Stylene Copolymer
GMKOREA EDS-M-4653-2014 Polypropylene and Styrene Butadiene Styrene Copolymer and EPDM Rubber Blend Shore A 80 (Version 4; English/Korean)
GMKOREA EDS-M-4301-2012 Heat Resistance Acrylonitrile- Butadiene-Styrene Copolymer
GMKOREA EDS-M-4654-2014 Polypropylene and Styrene Butadiene Styrene Copolymer and EPDM Rubber Blend Shore A 85 (Version 4; English/Korean)
GMKOREA EDS-M-4626-2011 Olypropylene/Styrene Butadiene Styrene Copolymer Blend ??????&??? ???? ??? ???? ??? Version 9; English/Korean [Replaced: GMKOREA EDS-M-4626]
GMKOREA EDS-M-4305-2012 Matt acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-5135-2012 Polyamide 6 / Acrylonitrile- Butadiene-Styrene Copolymer Blend
GMKOREA EDS-M-4644-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend (III)

AR-IRAM

IRAM 13 310-1962 Determination of soluble styrene content in polystyrene

European Committee for Standardization (CEN)

EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN 13163:2012 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification (Incorporates Amendment A1: 2015)

CEN - European Committee for Standardization

EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN 13163:2008 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification

BELST

STB 1978-2009 Polystyrol and concrete wall products. Specifications
STB 2222-2011 Foamed polistyrene aggregate in a granulated form. Specifications
STB 1437-2004 Insulating expanded polystyrene slabs. Specifications
STB 2148-2010 Factory made products of extruded polystyrene foam. Specifications

Association Francaise de Normalisation

NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF T51-901:1981 Plastics. Determination of residual styrene monomer in polystyrene by gas chromatography.
NF T54-420*NF EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods.
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T51-006:1957 Plastics. Determination of methanol-soluble polystyrene.
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T46-071*NF ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T53-030-2:1999 Plastics. Polystyrene (PS) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
NF B56-031:1982 Panneaux fibragglo - (composites polystyrène) - Spécifications
NF EN 13163+A2:2017 Produits isolants thermiques pour le bâtiment - Produits manufacturés en polystyrène expansé (EPS) - Spécification
NF EN 13163/IN2:2017 Produits isolants thermiques pour le bâtiment - Produits manufacturés en polystyrène expansé (EPS) - Spécification

GM North America

GM GMP.PS.004-1993 PS - Expandable Polystyrene
GM GM6055M-1986 Polystyrene Plastics Replaced by GM7000M
GM GM9311P-1988 Screen Analysis of Polystyrene Beads
GM GM9740P-1988 Acrylonitrile, Styrene and Butadiene Compositions in ABS Polymers

IN-BIS

IS 3463-1966 Specification for polystyrene wall tiles
IS 4105-1988 Styrene (vinylbenzene) specifications
IS 2267-1972 Specification for polystyrene molding materials
IS 4671-1984 Specification for expanded polystyrene for thermal insulation
IS 5189-1985 Specification for cold polymerized raw styrene-butadiene rubber
IS 5210-1969 Specification for high impact polystyrene sheets
IS 4112-1967 Specifications for fixing polystyrene wall tiles

FI-SFS

SFS 4388-1979 plastic. Polystyrene. Determination of styrene content depicted by vaporized chromium

(U.S.) Ford Automotive Standards

FORD WSB-M4D844-A11-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPUND
FORD WSB-M4D844-A8-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPOUND
FORD WSK-M4D844-A9-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), IMPACT RESISTANT MOLDING COMPOUND

SE-SIS

SIS 16 66 60-1966 Styrene moulding and extrusion compounds. General information
SIS 16 66 02-1966 Polystyrene. Determination of the percentage of styrene with Wijs solution

Standard Association of Australia （SAA）

AS/NZS 4585.1:1999 Low styrene emission resins - Determination of styrene evaporation from unsaturated polyester and vinyl ester resins

HU-MSZT

MSZ 7560-1981 MSZ 7560-81 polystyrene foam board

ZA-SANS

SANS 1508:2007 Expanded polystyrene thermal insulation boards

ES-AENOR

UNE 53-188 Pt.2-1991 Plastics. Polythylene(PE) and ethylene copoliner thermoplastics. Part 2: Preparation of test specimens and determination of properties

US-AAMA

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

SG-SPRING SG

SS 356-1991 SPECIFICATION FOR Disposable Polystyrene Cutlery

Malaysia Standards

MS 1502-2000 Specification for disposable polystyrene cutlery

United States Navy

NAVY MIL-S-14195 A REINST NOTICE 2-1990 STYRENE MONOMER
NAVY MIL-S-14195 A NOTICE 4-2003 STYRENE MONOMER
NAVY MIL-S-14195 A-1970 STYRENE MONOMER