absolute standard curve

absolute standard curve, Total:199 items.

The international standard classification for "absolute standard curve" includes: Noise with respect to human beings , Non-metalliferous minerals , Optical measuring instruments , Lines, connections and circuits .

The Chinese standard classification for "absolute standard curve" includes: Acoustic Measurement , Other non-metal mine product , Optical testing instrument , Communication line and equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 45335-2025 Determination of the content of attapulgite phase—X-ray diffraction standard curve method
GB/T 4963-2007 Acoustics—Normal equal-loudness-level contours

Professional Standard - Post and Telecommunication

YD 5012-2003 Insulation Objective to Ground and Testing Method for Optical Cable Link
YD 5012-1995 Insuiation Objective to Ground and Testing Method for Optical Cable Line

Professional Standard - Aerospace

QJ 2040.1-1991 Calibration method for standard leak Absolute calibration method
QJ 2040.1-1991修改单 Calibration method for standard leak Absolute calibration method

Guizhou Provincial Standard of the People's Republic of China

DB52/T 828-2013 Hard-width relative tree height curve table
DB52/T 771-2012 Huashan pine relative tree height curve table
DB52/T 824-2013 Soft width relative tree height curve table
DB52/T 776-2012 Cypress Relative Tree Height Curve Table
DB52/T 766-2012 Relative tree height curve table of Yunnan pine
DB52/T 711-2011 Relative tree height curve table of artificial masson pine
DB52/T 710-2011 The relative tree height curve table of Chinese fir

Group Standards of the People's Republic of China

T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/SXCAA 012-2021 Guidelines for Quality Control of Linear Calibration Curves

未注明发布机构

DVS 2205-1 BBL04:1996-08 Application of time curve to PVDF tube

Taiwan Provincial Standard of the People's Republic of China

CNS 682-1980 General Rules for Testing Standard of Insulated Wires
CNS 684-1980 Testing Standard for Electric Continuance of Insulated Wires
CNS 686-1980 Testing Standard for Conductivity of Insulated Conductors
CNS 685-1980 Testing Standard for D. C. Resistance of Insulated Conductors

Ministry of Housing and Urban-Rural Development of the People's Replublic of China

GB 51302-2018 Standard for design of overhead distribution line with insulated conductor

German Institute for Standardization

DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design
DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours
DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN VDE 0472-603:1989 Testing of cables, wires and flexible cords; bending behaviour
DIN VDE 0472-603 Testing of cables, wires and flexible cords; bending behaviour
DIN 48045:1959-09 Power current overhead lines; bent insulator spindles
DIN 48051-3:1964-01 Power overhead lines; bent insulator spindles for screwing

Association Francaise de Normalisation

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours

International Organization for Standardization (ISO)

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours

British Standards Institution (BSI)

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS EN 3373-014:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard

Gosstandart of Russia

GOST 9735-1987 Profile grinders. Standards of accuracy

Korean Agency for Technology and Standards (KATS)

KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS M 2247-2019 Test method for absolute viscosity of asphalts
KS M 6962-2012(2017) Standard specification for elastomeric foam thermal insulation material
KS C IEC 60304-2014(2019) Standard colours for insulation for low-frequency cables and wires
KS C IEC 60304:2014 Standard colours for insulation for low-frequency cables and wires
KS C IEC 60304-2014(2024) Standard colours for insulation for low-frequency cables and wires
KS C IEC 60304-2019 Standard colours for insulation for low-frequency cables and wires

TH-TISI

TIS 861-1989 Standard for marking of insulated conductors
TIS 227-1977 Standard for spool.type porcelain insulators
TIS 1077-1992 Standard for line-post type porcelain insulators

American Society for Testing and Materials (ASTM)

ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM E306-71(1976)e1 Method for Absolute Calibration of Reflectance Standards
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM E561-21 Standard Test Method for K R Curve Determination
ASTM E561-20 Standard Test Method for K R Curve Determination
ASTM E561-19e1 Standard Test Method for K R Curve Determination
ASTM E561-22 Standard Test Method for K R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-08e1 Standard Test Method for K-R Curve Determination
ASTM E561-19 Standard Test Method for K R Curve Determination
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-08 Standard Test Method for K-R Curve Determination
ASTM E561-15 Standard Test Method for K R Curve Determination
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D2144-07 Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
ASTM D2144-07(2013) Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E561-15a Standard Test Method for K R Curve Determination
ASTM E561-05e1 Standard Test Method for K-R Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM D4338-97(2011)e1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E162-08 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-98e1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-22 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E1629-12(2025)-25 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM E162-08b Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E1629-94(2001) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM E162-02ae1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM E1629-94 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM E1629-12(2025) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM D3032-16 Standard Test Methods for Hookup Wire Insulation
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method for K-R Curve Determination
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM E162-87 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-08a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-02a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM D3032-04 Standard Test Methods for Hookup Wire Insulation
ASTM E1629-12(2020) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM D3032-21a Standard Test Methods for Hookup Wire Insulation
ASTM D3032-10 Standard Test Methods for Hookup Wire Insulation
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D3032-21 Standard Test Methods for Hookup Wire Insulation
ASTM C203-05 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-22 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM E1891-21 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM C203-99 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM C203-05a(2012) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-05a Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM D3353-18 Standard Test Methods for Fibrous-Insulated Magnet Wire
ASTM C203-05a(2017) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM A976-18 Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM F3183-16 Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D3353-10 Standard Test Methods for Fibrous-Insulated Magnet Wire
ASTM F2321-03 Standard Specification for Flexible Insulated Temporary By-Pass Jumpers
ASTM D1676-17 Standard Test Methods for Film-Insulated Magnet Wire

The American Road & Transportation Builders Association

AASHTO R 75-2016(R2020) Standard Practice for Developing a Family of Curves
AASHTO R 75-2016(2020) Standard Practice for Developing a Family of Curves
AASHTO T 272-2004 Standard Method of Test for Family of Curves---One-Point Method
AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method

AASHTO - American Association of State Highway and Transportation Officials

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method

SE-SIS

Nr 39-1992 Curve electronics according to Swedish standards
SIS SMS 2027-1975 Dust separating. Standard curves for dust
SIS SS 424 06 91-1978 Overhead line material — Insulator holders — Curved square washer

Magyar Szabványügyi Testület

MSZ 4347-1981 Cold-bent symmetrical L-shaped standard steel dimensions
MSZ 1167/2-1984 Standard for overall dimensions of insulated power wires and cables

Society of Automotive Engineers (SAE)

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991
SAE ARP1192B-1987 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
SAE ARP1192B Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
SAE ARP1192B-1991 PROCEDURE FOR CALIBRATION AND VERIFICATION OF A LIQUIDBORNE PARTICLE COUNTER: AN ABSOLUTE STANDARD
SAE ARP1192 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
SAE ARP1192C Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
SAE ARP1192A-1978 PROCEDURE FOR CALIBRATION AND VERIFICATION OF LIQUID-BORNE PARTICLE COUNTER: AN ABSOLUTE STANDARD
SAE ARP1192C-2000 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
SAE ARP1192A Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard

American National Standards Institute （ANSI)

ANSI/TIA/EIA-568-B.1-1-2001 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 1 – Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
ANSI C29.17-2013 Standard for Insulators-Composite-Line Post Type
ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI/UL 44A-2010 Standard for Safety for Thermoset-Insulated Wires and Cables
ANSI C29.18-2013 Standard for Composite Insulators -Distribution Line Post Type
ANSI/UL 1022-2012 Standard for Safety for Line Isolation Monitors
ANSI C29.17-2002 American National Standard for Insulators - Composite - Line Post Type
ANSI/ASTM D1676:2017 Standard Test Methods for Film-Insulated Magnet Wire
ANSI/NEMA C29.18-2023 American National Standard for Composite Insulators - Distribution Line Post Type
ANSI/NEMA C29.1-2018 American National Standard for Composite Insulators - Distribution Line Post Type
ANSI/NEMA C29.17-2022 American National Standard for Composite Insulators - Transmission Line Post Type

Canadian Standards Association (CSA)

CSA T568.1-1-2005(R2010) Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
CSA T568.1-1-2005 Commercial building telecommunications cabling standard — Part 1: General requirements — Addendum 1 — Minimum 4-pair UTP and 4-pair ScTP patch cable bend radius (First Edition)
CSA C22.2 No.38-2018(R2021) Standard for safety of thermoset insulated wire and cable
CSA C22.2 No.38-05 UPD 2-2007 Fils et c鈈les ?isolant thermodurci

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
BH GSO ASTM F1874:2022 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
BH GSO IEC 60304:2016 Standard colours for insulation for low-frequency cables and wires

GCC Standardization Organization

GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
GSO ASTM E2218:2024 Standard Test Method for Determining Forming Limit Curves
BH GSO ASTM E2218:2024 Standard Test Method for Determining Forming Limit Curves
GSO IEC 60304:2015 Standard colours for insulation for low-frequency cables and wires
GSO ASTM F1874:2021 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures

VE-FONDONORMA

COVENIN 566-1975 Exchange bending test for ferrous metal steel wire in Venezuelan ferrous raw material standards
COVENIN 907-1975 Provision for Single Twist Measurement of Steel Wires in the Venezuelan Ferrous Materials Standard

IT-UNI

UNI S 195-1943 Insulation material standards. Numerical charts and graphs

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 972-1986 Trial-Use Standard for Connections of Insulated Aluminum Conductors
IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0207 Bei 1-2005*DIN VDE 0207 Bei 1:2005 DIN VDE 0207 series of standards for insulation and shielding compounds for cables and isolated conductors

ESDU - Engineering Sciences Data Unit

AERO W.01.01.04 A-1974 Effect of cut-out on lift-curve slope.
AERO C.01.01.04 A-1980 Effect of gap on the slope of lift curve and slope of lift increment curve due to control surface deflection.

Standard Association of Australia （SAA）

AS 1469:1973 Criteria curves for rating noise and establishing acoustic environment

Military Standards (MIL-STD)

MIL-STD-2223 NOT 1 Military Standard: Test Methods for Insulated Electric Wire

Ente Nazionale Italiano di Unificazione

UNI EN ISO 9073-7:2000 Textiles - Test methods for nonwovens - Determination of bending length

PK-PSQCA

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

Underwriters Laboratories (UL)

UL 83A-2021 UL Standard for Safety Flouropolymer Insulated Wire

PT-IPQ

NP 19-1961 textile. Instructions for the direction of yarn bending

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP78-1969 Relative Spectral Response Curves for Semiconductor Infrared Detectors

Danish Standards Foundation

DANSK DS/HD 402 S2:2016 Standard colours for insulation for low-frequency cables and wires

United States Navy

NAVY MIL-P-85585 NOTICE 1-1997 PROBES, EDDY CURRENT, UNSHIELDED, SINGLE COIL, ABSOLUTE
NAVY MIL-P-85585-1982 PROBES, EDDY CURRENT, UNSHIELDED, SINGLE COIL, ABSOLUTE

European Association of Aerospace Industries

AECMA PREN 3373-013-2003 Aerospace Series Terminal Lugs and in-line Splices for Crimping on Electric Conductors Part 013: In-line Splices, Insulated and Moisture Resistant, for Crimping on Copper Conductors, temperature up to 260 degrees C Product Standard Edition P 1

KE-KEBS

KS 04-187-1980 KENYA STANDARD SPECIFICATION FOR CONDUCTORS OF INSULATED CABLES

International Electrotechnical Commission (IEC)

IEC 60304:1969 Standard colours for insulation for low-frequency cables and wires

Spanish Association for Standardization (UNE)

UNE 20631:1985 STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES

Defense Logistics Agency

DLA MIL-DTL-9395 H SUPP 1-2006 SWITCHES, PRESSURE, (ABSOLUTE, GAGE, AND DIFFERENTIAL), GENERAL SPECIFICATION FOR