tens of thousands of errors

tens of thousands of errors, Total:82 items.

The international standard classification for "tens of thousands of errors" includes: Ceramic products , Measurement of force, weight and pressure , Photographic equipment. Projectors , Limits and fits , Animal feeding stuffs , Forging equipment. Presses. Shears .

The Chinese standard classification for "tens of thousands of errors" includes: Daily use ceramics products , Temperature and pressure instrument , Optical instrument in general , Basic standards and general methods , Livestock and poultry feed and additive , Metal forming machinery .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11337-1989 Measurement of departures from flatness
GB/T 3301-1999 Standard method for measurement of volume，rim diameter allowance，hight allowance，weight allowance and size of defects of domestic ceramic ware
GB/T 11336-2004 Measurement of departures from straightness
GB/T 4380-2004 Assessment of departure from roundness - Two-and three-point methods
GB/T 11337-2004 Measurementof departures from flatness
GB/T 7242-1987 Centering errors of lenses
GB/T 18823-2002 Allowable error for judge of quality testing results in feeds
GB/T 27504-2011 Pressure gauge error table
GB/T 11336-1989 Measurement of departures from straightness

Professional Standard - Machinery

JB/T 7557-1994 Coaxiality Error Detection
JB/T 9277-1999 Pressure gauge error meter
JB/T 10929-2010 Upper roller universal plate bending machine

Professional Standard - Aviation

HB 7-1-1968 error curve clamp

American National Standards Institute （ANSI)

ANSI/VITA 26-1998 Myrinet-on-VME
ANSI/SCTE 132-2012 Test Method for Reverse Path (Upstream) Bit Error Rate

ESDU - Engineering Sciences Data Unit

ESDU 85011 B-2013 Pitot and static errors due to non-steady flight
ESDU 85011 A-1991 Pitot and static errors due to non-steady flight.
ESDU 86006 A-1992 Pitot and static errors in steady level flight.

AT-ON

ONORM M 6775 Teil.4-1987 Accuracy of bevel gears; tolerances for shaft angle errors and common apex errors
ONORM M 6770-3-2000 Accuracy of cylindrical gears - Runout Fr
ONORM M 6775 Teil.3-1986 Accuracy of bevel gears; tolerances for composite errors

VDI - Verein Deutscher Ingenieure

VDI 3393-2014 Eingrenzung von Schleiffehlern
VDI 3393-1999 Grinding errors
VDI 3393-1975 Grinding errors
VDE/VDI 2620 Blatt 1-1973 Fortpflanzung von Fehlergrenzen bei Messungen; Grundlagen
VDI 2722-2001 Cardan shafts with Hook?s universal joints Homokinematic mechanisms

HU-MSZT

MSZ 6552-1959 Measurement error
MSZ 6550-1965 structural error
MSZ 19785-1981 Error in fan operating parameters
MSZ 7492-1980 Error and error concept of big wheels and saw blades
MSZ 737-1984 Measurement error up to 500 mm
MSZ 7493-1987 Definition of bevel and hypoid gear errors and error concepts

AGMA - American Gear Manufacturers Association

92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears
08FTM19-2008 How Are You Dealing with the Bias Error in Your Helical Gears?

American Gear Manufacturers Association

AGMA 92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
AGMA 90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears
AGMA 08FTM19-2008 How Are You Dealing with the Bias Error in Your Helical Gears?

Society of Automotive Engineers (SAE)

SAE AIR1608-1994 ESTIMATION OF TOTAL ERROR IN ALTIMETRY
SAE AIR1608B-2020 Estimation of Total Error in Altimetry
SAE AIR1608A-2008 Estimation of Total Error in Altimetry
SAE AIR1608A-2002 Estimation of Total Error in Altimetry

CZ-CSN

CSN 79 5790-2001 Footwear. acceptable error
CSN ON 25 1868-1967 Digital error meter small bracket
CSN ON 25 1820-1966 Digital error meter 0,01 mm
CSN 25 0008-1977 Metrology errors of primary standards forms of expressing

SAE - SAE International

SAE AIR1608-1989 Estimation of Total Error in Altimetry

Aeronautical Radio Inc.

ARINC 651-1 ITEM 4.0-1997 Fault Tolerance

British Standards Institution (BSI)

BS EN 61025:2007 Fault tree analysis (FTA)
BS PD ISO/TR 16907:2015 Machine tools. Numerical compensation of geometric errors
PD ISO/TR 16907:2015 Machine tools. Numerical compensation of geometric errors

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T G.135 SPANISH-1988 Error on the Reconstituted Frequency

Association of German Mechanical Engineers

VDI 3393-2016 Limiting of grinding errors

PT-IPQ

NP 107-1962 Tolérances et ajustements. Terminologie

SCC

MIL MIL-PRF-32232-2006 UNIVERSAL JOINT, RIGHT ANGLE, OFFSET, SHIPBOARD USE
VDI 2722-2003 Cardan shafts and cardan shaft trains with universal joints — Installation conditions for homokinematics
DANSK DS/EN 6081:2016 Aerospace series – Rivet, universal head, close tolerance – Inch series
VDI/VDE 3513 BLATT 2-2008 Variable area flowmeter — Error limits G of the device

IT-UNI

UNI ISO 5459:1986 Technical drawings. Description of geometric errors. Geometric Error Datums and Datum Systems
UNI 3963-P1-1978 Surface geometric errors. general definition
UNI 8104-P2-1980 Construction industry. Size deviation. Error measurement method
UNI 3963-P2-1978 Surface geometric errors. Surface roughness'1

Japanese Industrial Standards Committee (JISC)

JIS Z 9057:1966 Significance test of equality of the two population variances (two-sided)
JIS Z 8402:1991 General rules for permissible tolerance of chemical analyses and physical tests
JIS Z 9047:1979 Significance test of difference between the two population means (standard deviations known, two-sided)

CEN - European Committee for Standardization

PREN 6081-2018 Aerospace series - Rivet@ universal head@ close tolerance - Inch series

GSO

GSO ISO/TR 16907:2017 Machine tools -- Numerical compensation of geometric errors
OS GSO ISO/TR 16907:2017 Machine tools -- Numerical compensation of geometric errors

Korean Agency for Technology and Standards (KATS)

KS X ISO 12142:2007 Electronic imaging－Media error monitoring and reporting techniques for verification of stored data on optical digital data disks

ES-UNE

UNE-ISO/TR 16907:2018 IN Machine tools -- Numerical compensation of geometric errors

International Organization for Standardization (ISO)

ISO/TR 16907:2015 Machine tools - Numerical compensation of geometric errors

VN-TCVN

TCVN 3710-1981 Aquatic products.Errors in chemical tests

American Society of Mechanical Engineers (ASME)

ASME B107.2 Errata-1993 Socket wrenches, extensions, adaptors, and universal joints, power drive (impact) (inch series); Errata

International Telecommunication Union (ITU)

ITU-T R.2-1989 Element Error Rate - Telegraph Transmission (Study Group IX) 1 pp

German Institute for Standardization

DIN 3974-2:1995 Accuracy of worms and worm gears - Part 2: Tolerances for individual errors
DIN ISO 13942:2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2000)
DIN EN 6081:2023 Aerospace series - Rivet, universal head, close tolerance - Inch series; German and English version EN 6081:2022
DIN EN 6081:2016 Aerospace series - Rivet, universal head, close tolerance - Inch series; German and English version EN 6081:2016
DIN EN 61025:2007 Fault tree analysis (FTA) (IEC 61025:2006); German version EN 61025:2007

YU-JUS

JUS D.A8.061-1985 Testing ofplywood. Mistake measuring

Association Francaise de Normalisation

NF L21-046*NF EN 6081:2017 Aerospace series - Rivet, universal head, close tolerance - Inch series

GOSTR

GOST ISO/TR 16907-2017 Machine tools. Numerical compensation of geometric errors