in situ and ex situ

in situ and ex situ, Total:295 items.

The international standard classification for "in situ and ex situ" includes: Crude petroleum , Fissile materials , Nuclear energy in general , Chemical analysis of metals , Geology. Meteorology. Hydrology , Optics and optical measurements in general , Landscaping and silviculture , Earthworks. Excavations. Foundation construction. Underground works , Measurement of volume, mass, density, viscosity , Laboratory medicine , Occupational safety. Industrial hygiene .

The Chinese standard classification for "in situ and ex situ" includes: Engineering location, hydrogeological survey and geotechnical engineering , Standardization and quality management , Quantity and Unit , Crude petroleum , Isotope and radioactive sources in general , Steel and iron alloy analysis method , Oceanology , Optical equipment , Basic standard and general method , Landscaping and city appearance sanitation , Petroleum geology exploration , Medical laboratory equipment , Diagnostic standard for occupational diseases .

Group Standards of the People's Republic of China

T/ACEF 125-2023 Technical guideline for in-situ remediation of chromium contaminated sites - Mineral-electrochemical reduction and stabilization method
T/NDAS 26-2020 Technical requirements for in situ thermal desorption
T/ZSA 120-2022 In situ cold and thermal analysis platform
T/CSTM 00794-2022 Tensile testing for steel sheet and plate - In-situ image collecting
T/CSTM 01239-2024 Conversion additive of in-situ crystallization heavy oil
T/GIA 002-2019 Technical guideline of in-situ injection remediation technology for contaminated groundwater
T/CMRS 003-2025 In-situ powder-filled tube method for magnesium diboride superconducting round wire
T/ACEF 064-2023 Technical guidelines for stabilization remediation by in-situ reduction of chromium contaminated sites
T/LCAA 20-2025 Technical specification for in-situ preparation and application of compost tea
T/CECS 55-2020 The specifications for in-situ tests of groundwater
T/CECS 10272-2023 In situ test method for surface concrete permeability
T/ZPP 014-2022 Technical guidelines for in-situ ozone ultrafine bubble oxidation remediation of non-halogenated organic polluted groundwater
T/GRM 114-2025 Terminology for in-situ pyrolysis of oil-rich coal
T/CSES 117-2023 Technical specifications for contaminated soil remediation In situ microwave method

Professional Standard - Water Conservancy

SL 237-051-1999 Code for test of soil - in-situ frost heave amount test
SL 237-043-1999 In-situ shear test
SL 2.1-1998 General principle quantities units and symbols -- water resources and hydropower
SL/T 756-2017 Calibration method of special instruments for geotechnical in-situ testing
SL 237-042-1999 Code for test of soil - in-situ percolation test
SL 237-041-1999 Code for test of soil - in-situ density test
SL 94-1994 Determination of oxidation - reduction potential (Electrometric method)

Professional Standard - Environmental Protection

HJ 746-2015 Soil- Determination of redov potential - Potential method

未注明发布机构

AMPP Paper 16227-2021 In Situ Electrochemical Testing Of Stainless Steel Surfaces
DWA-M 905 E:2008-01 In Situ Soil Solution Collection (Draft)

Taiwan Provincial Standard of the People's Republic of China

CNS 11296.9-1985 Quantities and Units of Atomic and Nuclear Physics
CNS 11296-9-1985 Quantities and Units of Atomic and Nuclear Physics

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 43082-2023 General specification of lunar and planetary in-situ exploration camera
GB/T 3102.9-1993 Quantities and units of atomic and nuclear
GB/T 18609-2011 Determination of acid number of crude oil by potentiometric titration
GB/T 14503-1993 General principle of nomenclature and classification of radioisotope products
GB/T 6532-2012 Test method for salt in crude oils(Potentiometric method
GB/T 18609-2001 Standard test method for acid number of crude oil by potentiometric titration
GB/T 3101-1993 General principles concerning quantities，units and symbols
GB 3102.9-1993 Quantities and units of atomic and nuclear physics
GB/T 42643-2023 Specification for in-situ survey of acoustic properties in marine sediments
GB/T 30599-2014 In situ particulate reinforced ZL101A alloy matrix composites
GB 3101-1993 General principles concerning quantities, units and symbols
GB/T 5113-1985 Atomic mass unit and kilogram conversion tables
GB/T 14503-2008 General principle of nomenclature and classification of radioisotope products
GB/T 24213-2009 General rules for original position statistic distribution analysis method

Professional Standard - Agriculture

NY/T 3850-2021 Technical code of practice for fruit vegetable residues returned to soil in situ in protected facilities
SN/T 5641-2024 Determination of stable oxygen isotope ratios of water in non-concentrated reconstituted fruit juices for export - isotope equilibrium exchange method

Professional Standard - Coal

MT/T 793-1998 Testing of shear strength for rock mass in situ

Beijing Provincial Standard of the People's Republic of China

DB11/T 1153-2015 Raw coal energy consumption limit per unit product

Professional Standard - Forestry

LY/T 2959-2018 Technical specification for greening of salt-isolation layer in coastal saline soil
LY/T 3372-2024 Specification for positioning observation of grassland ecosystem

Professional Standard - Energy and Power Planning

DL/T 1480-2015 Test Method for Oxidation-reduction Potential of Water(ASTM D 1498-08,Stanadrd Test Method for Oxidation-reduction Potential of Water,MOD)

Professional Standard - Railway

TB 10018-2003（条文说明） Code for in－situ measurement of railway engineering geology
TB 10018-2003 Code for in-situ measurement of railway engineering geology
TB 10018-2018 Code for In-situ Testing of Railway Engineering Geology

Shandong Provincial Standard of the People's Republic of China

DB37/T 4640-2023 Guidelines for in-situ remediation of heavy metal contaminated sediments
DB37/ 2440-2013 Comprehensive energy consumption quota per unit product of xanthan gum
DB37/ 829-2015 Energy consumption limit per unit product of original liquor

Anhui Provincial Standard of the People's Republic of China

DB34/T 3912-2021 Technical requirements for emergency in-situ treatment of cyanobacteria

Professional Standard - Geology

DZ/T 0184.19-1997 Determination of zinc of hydrogen isotope in water in reduction method

Professional Standard - Energy

NB/T 11277-2023 Code of practice of geological evaluation for in-situ conversion shale oil
NB/T 11276-2023 Geological experimental items requirement for in-situ conversion of shale oil
NB/T 35102-2017 Specification for Soil Test in Situ in Borehole of H ydropower Projects
NB/T 11286-2023 Evaluating methods for shale oil profitable zone of in-situ conversion process

Professional Standard - Medicine

YY/T 1459-2016 Human gene in situ hybridization detection kit
YY/T 1261-2015 Detection kit for analysis of HER2 gene abnormalities(fluorescent in situ hybridization )

Professional Standard - Petroleum

SY/T 5237-2019 The hydrogen isotope analysis method of water- Zinc reduction and high temperature pyrolysis method
SY/T 7552-2005 Crude petroleum--Determination of water--Potentiometric Karl Fischer titration method

Ministry of Housing and Urban-Rural Development of the People's Replublic of China

GB/T 50480-2008 Code for insitu tests of geotechnical engineering investigation of metallurgical industry

Jilin Provincial Standard of the People's Republic of China

DB22/T 3346-2022 Technical regulations for returning rice grasslands to rot in situ during the wintering period
DB22/T 2543-2016 Technical regulations for in-situ return of full amount of corn stalks
DB22/T 2446-2016 Crude Oil Exploitation Unit Product Energy Consumption Quota

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 3042-2023 Technical specification for in situ consumption of sewage from dairy farms
DB15/T 3672-2024 Technical regulations for returning greenhouse vegetable straw to the field in situ

Professional Standard - Ferrous Metallurgy

YB/T 4895-2021 The norm of energy consumption per unit production of refractory raw material

Jiangsu Provincial Standard of the People's Republic of China

DB3202/T 1009-2020 Integrated Technical Specifications for In-Situ Restoration of Freshwater Ponds

Fujian Provincial Standard of the People's Republic of China

DB35/ 1131-2011 Energy consumption limit per unit product of solid-state liquor raw liquor
DB35/ 1133-2011 Energy consumption limit per unit product of liquid-process liquor

Professional Standard - Ocean

HY/T 0278-2019 Methods for in-situ measurement of acoustic properties in marine sediments

Professional Standard - Machinery

JB/T 12720-2016 In-situ tensile testing instruments for solid materials-Technical specification

Military Standard of the People's Republic of China-General Armament Department

GJB 7519-2012 Requirements for field in-situ non-destructive testing of aero-engines

Occupational Health Standard of the People's Republic of China

GBZ/T 249-2014 Method of dose estimation using chromosome translocation with fluorescence in situ hybridization
GBZ/T(卫生) 249-2014 Method of dose estimation using chromosome translocation with fluorescence in situ hybridization

Spanish Association for Standardization (UNE)

UNE-CLC/TS 50217:2006 Guide for in situ measurements - In situ measurement of disturbance emission
UNE 82100-0:1996 QUANTITIES AND UNITS. PART 0: GENERAL PRINCIPLES.
UNE 82100-9:1996 QUANTITIES AND UNITS. PART 9: ATOMIC AND NUCLEAR PHYSICS.
UNE-EN ISO 80000-10:2021 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)
UNE-EN ISO 11820:1997 ACOUSTICS. MEASUREMENTS ON SILENCERS IN SITU (ISO 11820:1996).
AENOR UNE-EN 17971:2025 Devices for in-situ generation of biocides - Ozone
UNE 62422:2014/2M:2021 Construction of double skin tanks by transforming « in situ » steel tanks
UNE 84101:2006 Cosmetic raw materials. Toothpastes. pH determination. Potentiometric method.
UNE-EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009)

CENELEC - European Committee for Electrotechnical Standardization

CLC/TS 50217-2005 Guide for in situ measurements – In situ measurement of disturbance emission

Association Francaise de Normalisation

NF X02-001:1993 Quantities and units. General principles.
NF EN ISO 5802:2009 Industrial fans - In situ performance test
NF X02-209:1993 Quantities and units. Atomic and nuclear physics.
NF X02-300-10*NF EN ISO 80000-10:2019 Quantities and units - Part 10 : atomic and nuclear physics
NF EN ISO 80000-10:2019 Quantities and Units - Part 10: Atomic and Nuclear Physics
NF X02-300-10:2013 Quantities and units - Part 10: atomic and nuclear physics
NF EN 14317-2:2007 Thermal insulation products for buildings - Thermal insulation products based on exfoliated vermiculite (EV) formed in place - Part 2: specification of products placed in place
NF ISO 10336:1998 Crude oil - Water dosage - Karl Fischer method by potentiometric titration
NF E67-003*NF EN ISO 17295:2023 Additive manufacturing - General principles - Part positioning, coordinates and orientation
NF EN ISO 11821:1997 Acoustics - Measurement of in situ acoustic attenuation of a removable screen
NF EN ISO 17295:2023 Additive manufacturing - General principles - Positioning, coordinates and orientation of the part

British Standards Institution (BSI)

BS ISO 31-0:1992 Quantities and units-General principles
BS ISO 80000-10:2009 Quantities and units. Atomic and nuclear physics
BS ISO 31-9:1992 Quantities and units-Atomic and nuclear physics
BS EN ISO 80000-10:2019 Quantities and units - Atomic and nuclear physics
BS EN ISO 80000-10:2013 Quantities and units. Atomic and nuclear physics
BS ISO 80000-10:2010 Quantities and units. Atomic and nuclear physics
BS 5775-0:1982 Specification for quantities, units and symbols-General principles
BS ISO 31-0:1992(2006) Quantities and units — Part 0 : General principles
BS 5775-9:1993 Specification for quantities, units and symbols-Atomic and nuclear physics
BS 5775-0:1993 Specification for quantities, units and symbols-General principles
BS 5775-9:1982 Specification for quantities, units and symbols-Atomic and nuclear physics
08/30126399 DC BS ISO 80000-10. Quantities and units. Part 10. Atomic and nuclear physics
BS EN 12697-40:2020 Bituminous mixtures. Test methods. In situ drainability
BS EN ISO 17295:2023 Additive manufacturing. General principles. Part positioning, coordinates and orientation

American Petroleum Institute (API)

API Publ 4740-2005 In-situ Burning A Decision-maker’s Guide to In-situ Burning
API PUBL 1628D-1996 In-Situ Air Sparging (First Edition)
API TR 1155-3-2016 In-situ beach treatment (sediment mixing and relocation) operation guide
API TR 1256-2016 In Situ Burning: A Decision Maker’s Guide
API TR 1155-1-2016 Shoreline In-Situ Treatment (Sediment Mixing and Repositioning) Library Report
API TR 1155-2-2016 Shoreline In-Situ Treatment (Sediment Mixing and Repositioning) Fact Sheet
API DR 145-2002 Identification of Oils that Produce Non-Buoyant in Situ Burning Residues and Methods for Their Recovery
API TR 1251-2015 On-site Operation Guide for In-situ Combustion of Inland River Oil Pollution

US-FCR

FCR COE EM 1110-1-4005-1997 IN-SITU AIR SPARGING
FCR COE EM 200-1-21-2014 DESIGN: IN SITU THERMAL REMEDIATION

Ente Nazionale Italiano di Unificazione

UNI CEI ISO 31-0:1996 Quantities and units. General principles.
UNI 10370:2010 Water quality - Determination of the oxidation-reduction potential
UNI 10370:1994 Determinatiion of the oxidation- reduction potential.
UNI CEI ISO 31-9:1997 Quantities and units. Atomic and nuclear physics
UNI CEI ISO 80000-10:2010 Quantities and units - Part 10: Atomic and nuclear physics
UNI CEI EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics
EC 1-2020 UNI CEI EN ISO 80000-10:2020 Quantities and units - Part 10: Atomic and nuclear physics
UNI CEI EN ISO 80000-10:2020 Quantities and units - Part 10: Atomic and nuclear physics
UNI CEI ISO 31-9:2003 Quantities and units - Atomic and nuclear physics
UNI EN ISO 17295:2023 Additive manufacturing - General principles - Part positioning, coordinates and orientation

SE-SIS

SIS SS 01 61 78-1978 Quantities and units. Atomic and nuclear physics
SIS 01 61 18-1971 Quantities and units. Introduction and general principles
SIS SS 01 61 18-1979 Quantities and units — General principles and writing rules

International Electrotechnical Commission (IEC)

IEC TS 61949:2007 Ultrasonics - Field characterization - In-situ exposure estimation in finite-amplitude ultrasonic beams

German Institute for Standardization

DIN CLC/TS 61949:2010 Ultrasonics - Field characterization - In situ exposure estimation in finite-amplitude ultrasonic beams (IEC/TS 61949:2007); German version CLC/TS 61949:2008
DIN IEC 746-5:1996 Expression of redox potential or redox potential Part 5: Redox potential (IEC 746-5:1992)
DIN EN ISO 5802:2016-02 Industrial fans - Performance testing in situ (ISO 5802:2001 + Amd 1:2015); German version EN ISO 5802:2008 + A1:2015
DIN 1080-1:1976 Terms, Symbols and Units Used in Civil Engineering; Principles
DIN EN ISO 80000-10:2020-02 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019); German version EN ISO 80000-10:2019
DIN EN 17971:2024 Devices for in-situ generation of biocides - Ozone; German version EN 17971:2024
DIN EN 17971:2024-09 Devices for in-situ generation of biocides - Ozone
DIN IEC 60746-5:1996-07 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
DIN EN 13359 E:1998-12 In-situ concrete flue lining for chimney components
DIN EN ISO 80000-10:2020 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)
DIN EN ISO 17295:2023-04 Additive manufacturing - General principles - Part positioning, coordinates and orientation (ISO 17295:2023); German version EN ISO 17295:2023
DIN EN ISO 80000-10 E:2016-09 Quantities and Units Part 10: Atomic and Nuclear Physics (Draft)
DIN 1080-1:1976-06 Terms, Symbols and Units Used in Civil Engineering; Principles

American Water Works Association (AWWA)

AWWA QTC97017 In Situ Electrolytic Disinfection (ISED)
AWWA ACE61602 A Method for the In-Situ Regeneration of Granular Filter Media
AWWA WQTC60613 In Situ Iron and Manganese Treatment Using the Vyredox and Vyregard Treatment Methods
AWWA WQTC71370 In Situ Characterization of Flocs for Drinking Water Treatment
AWWA QTC98244 In situ Reverse Transcription for the Detection of Micro-organisms in the Environment
AWWA WKICO66067 Hypolimnetic Oxygenation for In-Situ Control of Iron and Manganese in Water Supply Reservoirs

Bureau of Indian Standards

IS 1890-0-1995 Quantities and units-0 General Principles
IS 1890-9-1995 Quantities and units-9 Atomic and nuclear physics
IS 13673-5-1999 Expression of Performance of Electrochemical Analyzers - Part 5 : Oxidation-Reduction Potential or Redox Potential
IS/ISO 80000-10-2019 Quantities and units Part 10 : Atomic and nuclear physics

Swedish Institute for Standards

SS 16178:1978 Quantities and units - Atomic and nuclear physics
SS 637003:2015 Geographic information - Location addresses - Concepts and principles
SS 637003:2025 Geographic information — Location addresses — Concepts and principles
SS-EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009)
SS-EN ISO 80000-10:2019 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)

International Organization for Standardization (ISO)

ISO 31-9:1980 Quantities and units of atomic and nuclear physics
ISO 31-9:1973 Title missing - Legacy paper document
ISO 31-0:1992 Quantities and units; part 0: general principles
ISO 31-0:1981 General principles concerning quantities, units and symbols
ISO 31-0:1974 Title missing - Legacy paper document
ISO 80000-10:2009 Quantities and units - Part 10: Atomic and nuclear physics
ISO 31-9:1980/Amd 1:1985 Quantities and units of atomic and nuclear physics — Amendment 1
ISO 31-0:1992/Amd 1:1998 Quantities and units - Part 0: General principles; Amendment 1
ISO 80000-10:2019 Quantities and units — Part 10: Atomic and nuclear physics
ISO 31-0:1992/Amd 2:2005 Quantities and units - Part 0: General principles; Amendment 2
ISO/TR 5460:1985 Technical drawings; Geometrical tolerancing; Tolerancing of form, orientation, location and run-out; Verification principles and methods; Guidelines
ISO 31-9:1992/Amd 1:1998 Quantities and units — Part 9: Atomic and nuclear physics — Amendment 1
ISO 31-9:1992 Quantities and units; part 9: atomic and nuclear physics
ISO 17295:2023 Additive manufacturing — General principles — Part positioning, coordinates and orientation
ISO 80000-10:2019/CD Amd 1: Quantities and units — Part 10: Atomic and nuclear physics — Amendment 1
ISO 80000-10:2019/AWI Amd 1 Quantities and units — Part 10: Atomic and nuclear physics — Amendment 1

Danish Standards Foundation

DS/ISO 31/0:1982 General principles concerning quantities, units and symbols
DS/EN ISO 11820:1997 Acoustics - Measurements on silencers in situ
DANSK DS/ISO 80000-10:2019 Quantities and units – Part 10: Atomic and nuclear physics
DS/EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics
DANSK DS/EN ISO 80000-10:2013 Quantities and units – Part 10: Atomic and nuclear physics
DANSK DS/ISO 17295:2023 Additive manufacturing – General principles – Part positioning, coordinates and orientation
DS/ISO 31/9:1984 Quantities and units atomic and nuclear physics

Standard Association of Australia （SAA）

AS 2900.9:1986 Quantities, units, and symbols - Quantities and units of atomic and nuclear physics
AS 2900.0:1986 Quantities, units, and symbols - General principles concerning quantities, units, and symbols
AS ISO 17295:2023 Additive manufacturing — General principles — Part positioning, coordinates and orientation
AS 4073:1993 Urea-formaldehyde foam thermal insulation - In situ set foam

CZ-CSN

CSN 26 9040-1983 Unit loads. Principles of forming
CSN 01 1308-1986 Quantities and units of atotnic and nuclear physics
CSN ISO 31-0:1994 Quantities and units-Part 0:General principles
CSN 26 9030-1999 Operating unit. Principles of production, safe handling and storage
CSN 42 0623 Cast.2-1986 Chemical analysis of non-ferrous metals and alloys. Low-alloy copper. Determination of silver by the atomic absorption method and potentiometric titration method
CSN 42 0623 Cast.5-1986 Chemical analysis of non-ferrous metals and alloys. Low-alloy copper. Determination of tellurium by the atomic absorption method and potentiometric titration method
CSN 42 0623 Cast.3-1986 Low-alloy copper. Determination of chromium by the atomic absorption method and potentiometric titration method

Society of Automotive Engineers (SAE)

SAE AMS3572-1978 POLYURETHANE, FOAM-IN-PLACE, RIGID
SAE AMS3572A-1991 POLYURETHANE, FOAM-IN-PLACE, RIGID
SAE AMS3572 Resin Polyurethane, Foam-In-Place, Rigid
SAE AMS3572B Resin Polyurethane, Foam-In-Place, Rigid
SAE AMS3572A Resin Polyurethane, Foam-In-Place, Rigid
SAE AMS3572C Resin Polyurethane, Foam-In-Place, Rigid

Korean Agency for Technology and Standards (KATS)

KS I ISO 11820:2020 Acoustics — Measurements on silencers in situ
KS I ISO 11820-2020 Acoustics — Measurements on silencers in situ
KS I ISO 11820:2014 Measurements on silencers in situ
KS A ISO 31-9-2001(2011) Quantities and units－Part 9：Atomic and nuclear physics
KS C IEC 60746-5-2014(2019) Expression of performance of electrochemical analyzers — Part 5: Oxidation-reduction potential or redox potential
KS C IEC 60746-5-2019 Expression of performance of electrochemical analyzers — Part 5: Oxidation-reduction potential or redox potential
KS C IEC 60746-5-2014(2024) Expression of performance of electrochemical analyzers — Part 5: Oxidation-reduction potential or redox potential
KS A ISO 31-9:2012 Quantities and units － Part 9: Atomic and nuclear physics
KS C IEC 60746-5-2024 Expression of performance of electrochemical analyzers — Part 5: Oxidation-reduction potential or redox potential
KS F 1503-2010 Modular coordination in building－Principles and recommendation
KS A ISO 80000-10:2015 Quantities and units － Part 10: Atomic and nuclear physics
KS A ISO 80000-10:2020 Quantities and units — Part 10: Atomic and nuclear physics
KS A ISO 80000-10-2020 Quantities and units — Part 10: Atomic and nuclear physics
KS B ISO 5460:2015 Technical drawings - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Verification principles and methods - Guidelines
KS B ISO 5460:2005 Technical drawings-Geometrical tolerancing-Tolerancing of form, orientation, location and run-out-Verification principles and methods-Guidelines
KS B ISO 2692-1-2007 Technical drawings－Geometrical tolerancing－Maximum material principle

American Society for Testing and Materials (ASTM)

ASTM D6470-99 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D6470-99(2010) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D6470-99(2004) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D6470-99(2015) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D6470-99(2020) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM E690-15 Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
ASTM E690-15(2020) Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
ASTM STP 477-1970 Determination of in-situ deformation modulus of rock
ASTM F3013-13 Standard Test Method for Density of Topsoil and Blended Soils In-place by the Core Displacement Method
ASTM F2152-07(2018) Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
ASTM F2152-07(2021) Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
ASTM RR-D02-1458 1998 D6470-Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM C1394-03(2012) Standard Guide for In-Situ Structural Silicone Glazing Evaluation
ASTM C1394-20 Standard Guide for In-Situ Structural Silicone Glazing Evaluation
ASTM F1990-19 Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices
ASTM D1498-14(2022)e1 Standard Test Method for Oxidation-Reduction Potential of Water
ASTM RR-D19-1192 2015 D7937-Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water

AT-ON

ONORM A 1670-1979 Chair-desk working positionBasic principles

European Committee for Standardization (CEN)

prEN 90-1977 Chair-desk working position; basic principles
EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics
EN ISO 80000-10:2019 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)
EN ISO 17295:2023 Additive manufacturing - General principles - Part positioning, coordinates and orientation (ISO 17295:2023)

Standards Norway

NS-ISO 31-0:1992 Quantities and units — Part 0: General principles
NS-ISO 80000-10:2009 Quantities and units — Part 10: Atomic and nuclear physics
NS-ISO 31-9:1992 Quantities and units — Part 9: Atomic and nuclear physics
NS-EN ISO 80000-10:2019 Quantities and units – Part 10: Atomic and nuclear physics (ISO 80000-10:2019)
NS-EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009)

BE-NBN

NBN X 02-100-1987 General principles concerning quantities, units and symbols
NBN X 02-109-1990 Quantities and units of atomic physics and nuclear physics
NBN X 02-109-1989 Quantities and units of atomic and nuclear physics

RO-ASRO

SR ISO 31-0:1995 Quantities and units. Part 0: General principles
SR ISO 31-9:1995 Quantities and units - Part 9: Atomic and nuclear physics
STAS 737/14-1983 International system of units (SI) UNITS CHARACTERISTICS QUANTITIES OF ATOMIC AND NUCLEAR PHYSICS

CU-NC

NC 50-09-1987 Physical and Territorial Planning. Schools. Location Principies
NC 50-15-1986 Social Infrastructure and Housing. Sports Facilities Location Principies

TR-TSE

TS 1990-1975 GENERAL PRINCIPLES CONCERNING QUANTITIES UNITS AND SYMBOLS

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60746-5:2016 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential
BH GSO ISO 80000-10:2023 Quantities and units — Part 10: Atomic and nuclear physics

TH-TISI

TIS 235.10-2013 Quantities and units.part 10: atomic and nuclear physics

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60746-5:2014 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential

GCC Standardization Organization

GSO IEC 60746-5:2014 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential
GSO ISO 80000-10:2022 Quantities and units — Part 10: Atomic and nuclear physics
GSO ASTM D6470:2016 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
GSO ISO 10336:2010 Crude petroleum - Determination of water - Potentiometric Karl Fischer titration method

Instrument Society of America (ISA)

ISA 37.12-1982 Specifications and Tests for Potentiometric Displacement Transducers

Comitato Elettrotecnico Italiano

CEI UNI ISO 80000-10:2010 Quantities and units Part 10: Atomic and nuclear physics
CEI UNI EN/ISO 80000-10:2013 Quantities and units Part 10: Atomic and nuclear physics

CH-SNV

SN 018 011-1986 SN standards — Disposition and presentation

Japanese Industrial Standards Committee (JISC)

JIS Z 8000-10:2022 Quantities and units -- Part 10: Atomic and nuclear physics
JIS Z 8000-10:2015 Quantities and units -- Part 10: Atomic and nuclear physics
JIS Z 8202-9:2000 Quantities and units -- Part 9: Atomic and nuclear physics

VN-TCVN

TCVN 7594-2006 Soil quality.Determination of redox potential.Field method

Magyar Szabványügyi Testület

MSZ 7651-1961 Basic principles of building modules. measurement unit
MI 9250/2-1981 Insulation coordination guidelines. Test voltage detection

Lithuanian Standards Office

LST EN ISO 11820:2002 Acoustics - Measurements on silencers in situ (ISO 11820:1996)

FI-SFS

SFS 2105-1976 Shape tolerance and position tolerance. speed limit principle

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE OR-05-7-2-2005 Analyzing Interrupted In-Situ Tests on Vertical Boreholes
ASHRAE 4572-2002 Borehole Thermal Resistance from Line-Source Model of In-Situ Tests
ASHRAE 4521-2002 In Situ Measurement of Ground Thermal Conductivity: A Duch Perspective
ASHRAE 87.2-2002 In-Situ Method of Testing Propeller Fans for Reliability
ASHRAE KC-03-3-2-2003 Minimum Duration of In-Situ Tests on Vertical Boreholes

American Society of Mechanical Engineers (ASME)

ASME N-589-1-2001 Class 3 Nonmetallic Cured-In-Place Piping Section XI, Division 1; SUPP 5

NL-NEN

NEN 1226-1981 Quantities, SI units and their symbols Atomic and molecular phenomena
NEN 1211-1971 Quantities, SI units and their symbols Atomic and molecular phenomena

IN-BIS

IS 4434-1978 Soil in situ leaf shear test operating procedures
IS 1890 Pt.9-1983 Units and Symbols of Quantity Part 9 Atomic and Nuclear Physics

PL-PKN

PN T06513-02-1990 Measurement of redox potential value Industrial analyzers

International Association of Plumbing and Mechanical Officials

IAPMO IGC 321-2015 Cured-in-Place Point Rehabilitation Systems for Pipe Reconstruction

International Telecommunication Union (ITU)

ITU-T Q.2610-1999 Usage of Cause and Location in B-ISDN User Part and DSS2 - Series Q: Switching and Signalling - Broadband ISDN - Common Aspects of B-ISDN Application Protocols for Access Signalling and Network Signalling and Interworking Study Group 11; 11 pp

United States Navy

NAVY MIL-STD-1325-175 NOTICE 4-1993 RAILCAR LOADING OF HAZARDOUS MATERIALS BOMB, 2000 LB. MK 84 MOD 3 (THERMALLY PROTECTED) IN UNIT LOAD ADAPTER MK 79 MOD 0 WITH SADDLESS FLEET ISSUE UNIT LOAD

National Association of Corrosion Engineers (NACE)

NACE Paper 14792-2020 In situ atomic force microscopy and electrochemical measurements of organic inhibitors on mild steel

IT-UNI

UNI 7226-P2-1976 Technical drawings. Position and shape deviation. Maximum principle of materials

SCC

ASSP Z359.3-2017 Safety Requirements for Positioning and Travel Restraint Systems (Formerly ASSE Z359.3-2017)

Gosstandart of Russia

GOST R ISO 13408-5-2011 Aseptic processing of health care products. Part 5. Sterilization in place