mechanical properties of water

mechanical properties of water, Total:283 items.

The international standard classification for "mechanical properties of water" includes: Concrete and concrete products , Cement. Gypsum. Lime. Mortar , Doors and windows , Mechanical testing of metals , Textiles in general , Plastics , Iron and steel products , Timber structures , Hydraulic energy engineering , Furniture , Pumps , Aircraft and space vehicles in general , Measurement of volume, mass, density, viscosity , Equipment for the chemical industry , Testing of metals , Copper and copper alloys , Ferroalloys , Power stations in general , Wood, sawlogs and sawn timber , Implants for surgery, prosthetics and orthotics , Mechanical testing , Plastics in general , Jewellery , Railway rolling stock in general .

The Chinese standard classification for "mechanical properties of water" includes: Concrete product , Gypsum product , Concrete, aggregate, plaster and mortar , Building construction and decoration engineering , Metal mechanical property test method , Basic standards and general methods , Basic standards and general methods for synthetic resin and plastic , Building materials products in general , Steel and iron products in general , Timber engineering , Water turbine and its auxiliary equipment , Furniture in general , Pump , Basic standards and general methods , Basic laboratory equipment , Non-metal chemical machinery equipment , Concrete structure engineering , Rare metals and their alloys , Casting , , Basic standard and general method on forestry , Artistic handicrafts , General rolling stock standards in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13465.1-2002 Test method of mechanical properties of impermeable graphite materials-General
GB/T 10357.7-2013 Test of mechanical properties of furniture—Part 7:Stability of tables
GB/T 3691-2008 Mechanical properties testing method of steel wool cement tile
GB/T 10357.2-1989 Test of mechanical properties of furniture; Stability of chairs and stools
GB/T 7897.5-1990 Test methods of mechanical properties of mortar for ferrocement--Test of axial compressive strength
GB/T 50129-2011 Testing Methods of Basic Mechanical Performance of Masonry Structures
GB/T 30436-2013 Hydrostatical Balance
GB/T 6396-2008 Clad steel plates - Mechanical and technological test
GB/T 7897.1-1987 Test method of mechanical properties of mortar for ferrocement--General principle
GB/T 11793.3-1989 Testing methods on mechanical and weathering properties for PVC windows
GB/T 10623-1989 Metallic materials--Terms of mechanical test
GB/T 11793.2-1989 Technical requirements on mechanical and weathering properties for PVC windows
GB/T 7897.2-1987 Test method of mechanical properties of mortar for ferrocement--Test of bending strength
GB/T 7897.7-1990 Test methods of mechanical properties of mortar for ferrocement--Test of poisson's ratio
GB/T 10357.4-1989 Test of mechanical properties of furniture; Stability of storage units
GB/T 20043-2005 Field acceptance test to determine the hydraulic performance of hydraulic turbine,storage pumps and pump-turbines
GB/T 7897.8-1990 Test methods of mechanical properties of mortar for ferrocement--Bond test
GB/T 10357.4-2013 Test of mechanical properties of furniture—Part 4:Stability of storage units
GB/T 10357.4-2023 Test of mechanical properties of furniture—Part 4:Stability of storage units
GB/T 22638.11-2023 Test methods for aluminium and aluminium alloy foils―Part 11:Determination of mechanical properties
GB/T 10357.6-1992 Test of mechanical properties of furniture－Strength and durability of beds
GB/T 10623-2008 Metallic material - Mechanical testing - Vocabulary
GB/T 7897.6-1990 Test methods of mechanical properties of mortar for ferrocement--Test for static modulus of elasticity in compression
GB/T 9158-2015 Test methods of mechanics performance for windows and doors in building
GB/T 7897-2008 Test methods of mechanical properties of mortar for ferrocement
GB/Z 43364-2023 Rotodynamic pumps—Hydraulic performance acceptance test using a model pump
GB/T 6396-1995 Clad plates－Mechanical and technological test
GB/T 7897.3-1987 Test method of mechanical properties of mortar for ferrocement--Test of compressive strength
GB/T 10357.5-1989 Test of mechanical properties of furniture; Strength and durability of storage units
GB/T 11971-1997 Test method for mechanical property of aerated concrete
GB/T 14452-1993 Metallic materials－Determination of bending mechanical properties
GB/T 17107-1997 Structural Steel Grades and Mechanical Property for Forgings
GB/T 50081-2002 Standard for test method of mechanical properties on ordinary concrete
GBJ 129-1990 Testing methods of basic mechanical performance of masory structures
GB/T 10357.7-1995 Test of mechanical properties of furniture－Stability of tables
GB/T 50081-2019 Standard for test methods of concrete physical and mechanical properties
GB/T 10357.1-1989 Test of mechanical properties of furniture; Strength and durability of tables
GB/T 17669.3-1999 Gypsum plasters - Determination of mechanical properties
GB/T 10357.3-1989 Test of mechanical properties of furniture; strength and dutability of chairs and stools
GB/T 1039-1992 Plastics-General rules for the test method of mechanical properties
GB/T 7897.4-1987 Test method of mechanical propertes of mortar for ferrocement--Test of tensile splitting strength
GB/Z 32009-2015 New textile materials―Datasheet of mechanical properties
GB/T 31264-2014 Test methods for mechanical properties of structural wood-based panels
GB/T 28993-2012 Standard test methods for mechanical properties of structural lumber
GB/T 14410.4-1993 Flight mechanics－Concepts,quantities and symbols Flight performance

工业和信息化部/国防科技工业局

WJ/T 9088-2015 Calculation of thermodynamic properties of industrial explosives

Professional Standard - Ferrous Metallurgy

YB/T 4321-2012 Steel Sheets and Strips with Specified Magnetic Properties and Mechanical Properties
YB/T 5349-2014 Metallic materials. Determination of bending mechanical porperties
YB/T 5349-2006 Metallic materials - Determination of bending mechanical properties

Group Standards of the People's Republic of China

T/CSAE 111-2019 The terms and definition related to aerodynamics performance for passenger car
T/WEA 008-2023 Professional Competence Standards for International Chinese Language Teachers
T/CDSA 103.15-2017 Requirements for the recognition of diver medical technicians
T/CAS 597-2022 Technical specification for energy-saving evaluation of intelligent gas-fired heating water heaters with user habit learning ability

Professional Standard - Building Materials

JC/T 2461-2018 Standard test method for the mechanical properties of ductile fiber reinforced cementitious composites

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1286-2014 Determination of dynamic mechanical properties of plastics by torsional pendulum method

Professional Standard - Non-ferrous Metal

YS/T 815-2012 Preparation Method of Tese Pieces for Mechanical and Technological Properties of Copper and Copper Alloys

Professional Standard - Machinery

JB/T 7945-1999 Methods for testing the mechanical properties of grey cast iron
JB/T 4744-2000 Mechanical property tests of product welded test coupons for steel pressure vessels

Professional Standard - Aviation

HB 5431-1989 Data expression criteria for mechanical properties of metallic materials
HB 7476-1996 Qualification of metal mechanical performance testing personnel

国家能源局

NB/T 25087-2018 Test methods for the kinetic behavior of ion exchange resins used in nuclear power plant water treatment systems

Professional Standard - Forestry

LY/T 2564-2015 Determination of physical and mechanical properties of bamboo culm
LY/T 1350-1999 Test methods for physical and mechanical properties of finger-jointed lumber
LY 210-1979 Particleboard physical and mechanical properties test method
LY/T 2369-2014 Testing methods for physical and mechanical properties of desert shrub

Professional Standard - Electricity

DL/T 1854-2018 Test method for kinetic performance of strongly basic anion exchange resins for water treatment in power plants

未注明发布机构

DIN EN 13141-4 E:1998-05 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
DIN EN 1097-2 E:2018-02 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
DIN EN 60500 E:2016-03 Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz
DIN EN ISO 17138:2022 High-performance ceramics – Mechanical properties of ceramic composite materials at room temperature – Determination of flexural strength
JIS B 8301:2018E Rotodynamic pumps-Hydraulic performance acceptance testsGrades 1, 2 and 3
DIN 51165-1 E:2021-12 Vitreous and porcelain enamels - Determination of the resistance to hydroabrasion - Part 1: Hydroabrasion testing apparatus
DIN EN 1097-2 E:2016-07 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation

国家认证认可监督管理委员会

RB/T 146-2018 Guidance on the proficiency testing of mechanical property for metalwork of construction

工业和信息化部

YS/T 3039-2021 Method for mechanical properties determination of the filling materials in gold mine

Military Standard of the People's Republic of China-General Armament Department

GJB 2201-1994 Test methods for ultra-low temperature mechanical properties of metals
GJB/Z 84-1996 Thermodynamics calculate method of propellant performance capability (GJB/Z 84-96)
GJB/Z 18-1991 Criteria for expression of mechanical properties data of metal materials

Professional Standard - Agriculture

GB 50081-2002 Test methods for mechanical properties of ordinary concrete
GB 11916-1989 Test methods for physical and mechanical properties of finger-jointed materials
GBJ 81-1990 Test methods for mechanical properties of ordinary concrete

国家药监局

YY/T 1782-2021 Test methods for mechanical property of external skeletal fixation devices
YY/T 1781-2021 Test methods for mechanical property of metallic bone staples

Professional Standard - Energy

NB/T 47016-2011 Mechanical Property Tests of Product Welded Test Coupons for Pressure Equipments
NB/T 47016-2023 Mechanical property tests of product welded test coupons for pressure equipments

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33061.1-2016 Plastics-Determination of dynamic mechanical properties- Part 1:General principles
GB/T 35777-2017 Mechanical tests for metal alloys adornment chains―Tensile testing

国家林业局

LY/T 2917-2017 Standard methods for development of characteristic mechanical values of structural glued laminated timber

Professional Standard - Coal

MT/T 593.3-2011 Artificial Frozen Soil Physics Mechanics Performance Test - Part3 - Consolidation Under Hydrostatic Pressure for Artificial Frozen Soil Test Method
MT/T 593.3-1996 Physical and Mechanical Properties Test of Artificial Frozen Soil Part 3: Consolidation Test Method of Artificial Frozen Soil Under Hydrostatic Pressure

Professional Standard - Railway

TB/T 3115-2005 Test methods for dynamic performance of locomotive and rolling stock on test rig

PL-PKN

PN D04119-1959 Physical and mechanical properties of wood -- Determination of water absorption
PN C89103 ArkusZ10-1974 Terminology of plastics Mechanical properties
PN D04115-1958 Physical and mechanical properties of wood -- Determination of modulus of elasticity in compression parallel to grain
PN D04120-1960 Physical and Mechanical Properties of Wood. De?ermining of ?he Hygroscopisify
PN D04113-1955 Physical and mechanical properties of wood -- Grindability test
PN H92741-03-1987 Aluminium and aluminium alloys Sheets Mechanical properties
PN D04106-1954 Physical and mechanical properties of wood -- Test for cleavage
PN D04116-1959 Physical and mechanical properties of wood -- Determination of bucking strength
PN D04225-1968 Physical and mechanical properties of fibroboardDetermination of hygroscopicity
PN-EN 13141-4-2021-09 E Ventilation for buildings -- Performance testing of components/products for residential ventilation -- Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
PN E04410-24-1986 Electroinsulating varnishes Test methods Testing of mechanical properties
PN M73079-1986 Hydraulic fluid power General operation specifications anunified system of hydraulics

HU-MSZT

MSZ 711/4-1981 Mechanical properties
MSZ 770/4-1981 mechanical properties of copper pipe
MSZ 711/2-1982 Mechanical properties of aluminum copper discs
MSZ 710/5-1979 Mechanical properties of wires
MSZ 710/2-1988 Introduction to the mechanical properties of bronze
MSZ 771/5-1979 Mechanical properties of semiconductor materials
MSZ 770/3-1980 Brass rod mechanical properties
MSZ 771/3-1980 Mechanical properties of copper-nickel alloy
MSZ 770/5-1983 Brass wire mechanical properties
MSZ 771/2-1982 Mechanical properties of copper-nickel alloy plates
MSZ 1168/4-1984 Electric power testing insulated wires and cables and mechanical properties testing

British Standards Institution (BSI)

BS ISO 23840:2021 Water hydraulics. Water-hydraulic pumps. Methods of testing and representing basic steady-state performance
21/30391474 DC BS ISO 23840. Water hydraulics. Water-hydraulic pumps. Methods of testing and representing basic steady-state performance
BS 5860:1980(1999)*IEC 607:1978 Method for Measuring the efficiency of hydraulic turbines, storage pumps and pump - turbines (thermodynamic method) [ IEC title : Thermodynamic method for measuring the efficiency of hydraulic turbines, storage pumps and pump - turbines ]
BS EN 13141-4:2021 Ventilation for buildings. Performance testing of components/products for residential ventilation. Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
BS IEC 62977-3-5:2023 Electronic displays. Evaluation of optical performance. Colour capabilities
BS ISO 11843-5:2008 Capability of detection - Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2009 Capability of detection. Methodology in the linear and non-linear calibration cases
BS EN 60500:2017 Underwater acoustics. Hydrophones. Properties of hydrophones in the frequency range 1 Hz to 500 kHz
BS ISO 9211-4:2022 Optics and photonics. Optical coatings. Specific test methods: abrasion, adhesion and resistance to water
PD 6525-1:1990 Elevated temperature properties for steels for pressure purposes.. Stress rupture properties
BS EN 62127-3:2007+A1:2013 Ultrasonics. Hydrophones. Properties of hydrophones for ultrasonic fields up to 40 MHz
BS EN 62127-3:2008 Ultrasonics. Hydrophones. Properties of hydrophones for ultrasonic fields up to 40 MHz
BS ISO 18237:2017 Hydraulic fluid power. Method for evaluating water separation performance of dehydrators

European Committee for Standardization (CEN)

EN 1097-10:2014 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
EN 14272:2011 Plywood - Calculation method for some mechanical properties

Korean Agency for Technology and Standards (KATS)

KS B 0240-2016(2021) Mechanical properties of steel set screws
KS B 0241-2016(2021) Mechanical properties of corrosion-resistant stainless-steel fasteners
KS M ISO 6721-1-2012(2017) Plastics－Determination of dynamic mechanical properties－Part 1：General principles
KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS R 1131-2001 Road vehicles－Safety glazing materials－Mechanical tests
KS E 3711-2021 Hardcoa1-Determination of moisture-holdingcapacity
KS M ISO 6721-2-2013(2018) Plastics ㅡ Determination of dynamic mechanical properties ㅡ Part 2: Torsion-pendulum method
KS C IEC 60041:2014 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
KS M ISO 6837-2007(2018) Surface active agents－Water dispersing power in dry cleaning solvents

RU-GOST R

GOST 28924-1991 Grinding materials. Test methods of physical and physical-mechanical properties
GOST R 58017-2017 Plastics. Determination of dynamic mechanical properties. Compression
GOST 24160-2014 Peat. Methods for the determination of water retention capacity and water absorption capacity
GOST 1759.5-1987 Nuts. Mechanical properties and test methods
GOST R 54512-2011 Classification of chemicals hazardous due to their physical and chemical properties. Determination of ability of chemicals to emit flammable gases in contact with water
GOST R 54512-2011(2019) Classification of chemicals hazardous due to their physical and chemical properties. Determination of ability of chemicals to emit flammable gases in contact with water
GOST 12288-1966 Mining rocks. Methods for the determination of mechanical properties by punching

CZ-CSN

CSN 72 2605 Z1-1996 Brick test. Mechanical properties
CSN 83 0540 Cast.7-1982 Chemical and physical analysls of waste water Determinatlon of neutra- lizing capacity
CSN 72 2605-1978 Testing of brick products. Determination of mechanical properties
CSN 73 1326-1984 Resistance of cement concrete surface to water and defrosting chemicals
CSN 11 9000-1972 Hydrostatic power mechanisme. Terminology

International Organization for Standardization (ISO)

ISO 3051:1974 Gypsum plasters; Determination of mechanical properties
ISO 3522:1984 Cast aluminium alloys; Chemical composition and mechanical properties
ISO 3522:2006 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
ISO/R 2147:1971 Aluminium alloys — Sand cast test pieces — Mechanical properties
ISO 6721-1:2019 Plastics — Determination of dynamic mechanical properties — Part 1: General principles

SCC

BS EN ISO 6721-12:2022 Plastics. Determination of dynamic mechanical properties
IEC 60607:1978 Thermodynamic method for measuring the efficiency of hydraulic turbines, storage pumps and pump-turbines
BS EN ISO 6721-2:1996 Plastics. Determination of dynamic mechanical properties-Torsion-pendulum method
DANSK DS/EN 14272:2012 Plywood - Calculation method for some mechanical properties
AENOR UNE-EN 14272:2012 Plywood - Calculation method for some mechanical properties
NS-EN 14272:2011 Plywood — Calculation method for some mechanical properties
BS 5413-3:1976 Specification for the performance of draw-off taps with metal bodies for water services. Hydraulic characteristics
DANSK DS/EN IEC 63251:2023 Test method for mechanical properties of flexible opto-electric circuit boards under thermal stress
BS EN ISO 6721-1:1996 Plastics. Determination of dynamic mechanical properties-General principles
DANSK DS/EN 60041:1995 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
CEI EN 60041:1997 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
BS 5412-3:1976 Specification for the performance of draw-off taps with metal bodies for water services-Hydraulic characteristics
DIN EN 14272 E:2010 Draft Document - Plywood - Calculation method for some mechanical properties; German version prEN 14272:2009
BS 4618-5.4:1972 Recommendations for the presentation of plastics design data. Other properties-Acoustical properties (mechanical damping capacity)
NS-EN 13141-4:2021 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
DANSK DSF/PREN 13141-4:2018 Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
DANSK DS/EN 13141-4:2021 Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
DIN EN 13141-4 E:2018 Draft Document - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units; German and English version prEN 13...
AWWA MTC61145 Low-Fouling Membranes: Evaluating Performance from a Thermodynamic Perspective
HI 11.6-2017 American National Standard for Rotodynamic Submersible Pumps for Hydraulic Performance, Hydrostatic Pressue, Mechanical, and Electrical Acceptance Tests
BS PD 6525-1:1990 Elevated temperature properties for steels for pressure purposes.-Stress rupture properties
AWWA ACE63177 Impact of Flocculation Hydraulic Retention Time on Performance of Membrane Filtration
NS-EN 16002:2018 Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

Indonesia Standards

SNI 02-0831.2-1998 Performance of power paddy thresher, straw throw - in types

GM Europe

GME GMI R-0-15-1996 Vehicle Performance, Driving Mechanics and Drivability (English/German; ITDC Release, Draft for Harmonization)

AENOR

UNE-EN 1097-10:2015 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
UNE-EN 60041:1998 FIELD ACCEPTANCE TESTS TO DETERMINE THE HYDRAULIC PERFORMANCE OF HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES.
UNE-EN 14272:2012 Plywood - Calculation method for some mechanical properties
UNE-EN 14701-4:2010 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges

Lithuanian Standards Office

LST EN 1097-10-2003 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
LST EN 14272-2012 Plywood - Calculation method for some mechanical properties
LST EN 13141-4-2021 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
LST EN 14701-4-2010 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
LST EN 60041-2001 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines (IEC 60041:1991, modified)

Danish Standards Foundation

DS/EN 1097-10:2003 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
DS/EN 14272:2012 Plywood - Calculation method for some mechanical properties
DS/EN 14701-4:2010 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges

Standard Association of Australia （SAA）

AS 7637:2014 Hydrology and Hydraulics

US-FCR

FCR NAV DM-5.2-1979 HYDROLOGY AND HYDRAULICS
FCR COE EM 1110-2-1416-1993 RIVER HYDRAULICS
FCR COE EM 1110-2-1607-1991 TIDAL HYDRAULICS

SE-SIS

SIS SS 84 31 11-1978 Ropes — Determination of certain physical and mechanical properties

American Society of Mechanical Engineers (ASME)

ASME A112.19.6-1995 Hydraulic Performance Requirements for Water Closets and Urinals (Included in A112.19.2-2003)

German Institute for Standardization

DIN EN 14272:2012-03 Plywood - Calculation method for some mechanical properties; German version EN 14272:2011
DIN EN 13141-4:2022 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
DIN EN 14701-4:2019 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludge
DIN EN 13141-4:2022-12 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units; German version EN 13141-4:2021
DIN EN 13141-4:2018 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units; German and English version prEN 13141-4:2018
DIN 19702:2010 Solid structures in hydraulic engineering - Bearing capacity, serviceability and durability
DIN 51165-1:2024-03 Vitreous and porcelain enamels - Determination of the resistance to hydroabrasion - Part 1: Hydroabrasion testing apparatus
DIN 51165-1:2023-05 Vitreous and porcelain enamels - Determination of the resistance to hydroabrasion - Part 1: Hydroabrasion testing apparatus / Note: Date of issue 2023-04-21
DIN 52459:1981 Testing of building sealants; determination of the water absorption of backfill material; retentive capacity
DIN 19702:2013 Solid structures in hydraulic engineering.Bearing capacity, serviceability and durability

US-HI

HI 14.6-2011 Rotodynamic Pumps for Hydraulic Performance Acceptance Tests

IT-UNI

UNI 7839-1978 Thermodynamic data for calculation of gas fuel heat generation capacity performance
UNI 7439-1975 Determination of Heat Generating Capacity Performance of Gas Fuels with Water Flow Calorimeter
UNI EN 13141-4-2021 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units

Association Francaise de Normalisation

NF V19-002:1993 Pet litters. Determination of absorbent power. Water retention capacity.
NF C55-401*NF EN 60041:2014 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pumps-turbines
NF T90-360:1997 Testing water. Determination of absorbent power. Oil retention capacity.
FD E44-174*FD ISO/TR 19688:2019 Rotodynamic pumps - Hydraulic performance acceptance test using a model pump
NF A36-200:1982 Influence des traitements thermiques après soudage sur les propriétés mécaniques des aciers pour chaudières et appareils à pression
A36-200:1982 Influence of post-welding heat treatment on steels for boilers and presure vessels mechanical properties.
FD ISO/TR 19688:2019 Rotodynamic pumps - Model pump used for hydraulic performance testing
NF E38-350:1995 Heat exchangers. Verification methods for thermodynamic performance of power plant condensers.
NF E51-729-4*NF EN 13141-4:2021 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4 : aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
NF T70-631-15*NF EN 13631-15:2005 Explosives for civil uses - High explosives - Part 15 : calculation of thermodynamic properties
NF E44-602:2017 Dynamic Agitators - Hydrodynamic Performance Assessment
PR NF E44-602-2017 Dynamic agitators - Hydrodynamic performance evaluation
NF T73-415:1983 Surface active agents. Water dispersing power in dry cleaning solvents.
NF E48-664*NF ISO 18237:2018 Hydraulic fluid power - Method for evaluating water separation performance of dehydrators

KR-KS

KS C IEC 60041-2023 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories

International Electrotechnical Commission (IEC)

IEC 60041:1991 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
IEC 60041:1991/COR1:1996 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
IEC 60500:2017 Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz

Society of Automotive Engineers (SAE)

SAE J3230-1-2021 Kinematic Performance Metrics for Powered Standing Scooters
SAE J323-2021 Kinematic Performance Metrics for Powered Standing Scooters
SAE J3230/1-2021 Kinematic Performance Metrics for Powered Standing Scooters

GSO

OS GSO IEC 60041:2014 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
BH GSO ISO 3522:2016 Aluminium and aluminium alloys -- Castings -- Chemical composition and mechanical properties
GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
OS GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
GSO IEC 60041:2014 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
GSO 938:2009 Test Methods for Chemical Properties of Portland Cement
OS GSO 938:2009 Test Methods for Chemical Properties of Portland Cement
GSO ISO 6837:2008 Surface active agents - Water dispersing power in dry cleaning solvents

RO-ASRO

STAS 9056-1971 DETERMINATION OF THE MECHANICAL PROPERTIES OF METAL DEPOSITED BY GAS WELDING
STAS 8871/6-1973 Electric vacuum cleaners for household use METHODS FOR MEASURING THE PERFORMANCE Mechanical tests

IFI/FASTNR - Industrial Fastener Institute

125-1987 Test Procedure for the Locking Ability Performance of Chemical Coated Lock Screws
525-1982 Test Procedure for the Locking Ability Performance of Metric Chemical Coated Lock Screws

American Society for Testing and Materials (ASTM)

ASTM D4092-07 Standard Terminology: Plastics: Dynamic Mechanical Properties
ASTM D4092-96 Standard Terminology: Plastics: Dynamic Mechanical Properties
ASTM D5024-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
ASTM D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM D5026-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM D5026-06 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM D5026-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM F256-94(1999) Standard Specification for Chromium-Iron Sealing Alloys with 18 or 26 Percent Chromium
ASTM F2569-11(2019) Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4-1998 Mechanical Test Methods Revision R

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE OR-16-C018-2016 Demonstration of Chemical and Non- Chemical Cooling Water Treatment Principles and Performance
ASHRAE 4069-1997 Thermodynamic Properties of the Lithium Bromide + Diethanolamine + Water System
ASHRAE LV-11-C015-2011 Myths and Realities of Indirect Evaporative Cooling Thermodynamic Performance
ASHRAE 4726-2004 Multidimensional Effects of Ground Heat Transfer on the Dynamics of Building Thermal Performance

YU-JUS

JUS C.A4.019-1986 Mechanlcal testing ofmetals. VVrapping test of wire

National Aeronautics and Space Administration (NASA)

NASA-TR-R-50-1959 Approximations for the Thermodynamic and Transport Properties of High-Temperature Air

American Welding Society (AWS)

WRC 027:1956 Part 1: Mechanical Properties and Weldability of Six High-Strength Steels
WRC 152:1970 Influence of Weld Defects on the Mechanical Properties of Aluminum Alloy Weldments
WRC 502:2005 Effect of Microfissures on Corrosion Performance and Mechanical Properties of Austenitic Stainless Steel Weld Metals

Cooling Technology Institute

CTI STD-201-2004 Standard for the Certification of Water-Cooling Tower Thermal Performance

Japanese Industrial Standards Committee (JISC)

JIS B 8311:2022 Reciprocating pumps -- Hydraulic performance acceptance tests
JIS B 1061:2020 Mechanical properties of fasteners made of carbon steel and alloy steel -- Flat washers with specified property classes
JIS K 7223:1996 Testing method for water absorption capacity of super absorbent polymers
JIS K 7244-6:1999 Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method

CEN - European Committee for Standardization

PREN 13141-4-2018 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic@ electrical power and acoustic performance of unidirectional ventilation units

AT-ON

OENORM EN 13141-4-2021 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
ONORM S 2115-1997 Determination of the eluation capacity of waste with water

ES-UNE

UNE-EN 13141-4:2021 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
UNE-EN 16002:2020 Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

WRC - Welding Research Council

BULLETIN 152-1970 INFLUENCE OF WELD DEFECTS ON THE MECHANICAL PROPERTIES OF ALUMINUM ALLOY WELDMENTS

AR-IRAM

IRAM 8519-1963 Static method of determination of water resistance of mineralized tanned leather

FI-SFS

SFS 5282-1987 The main component of concrete. Fixed density and water absorption. hydrostatic method

BR-ABNT

ABNT NBR 6656-2008 Mechanical properties, deep drawability and weldability characteristics of steel plates, coils and plates - Specification

American National Standards Institute （ANSI)

ANSI/ARI/ASHRAE/ISO 13256-2:1998 Water-Source Heat Pumps - Testing and Rating for Performance: Part 2 - Water-to-Water and Brine-to-Water Heat Pumps

American Petroleum Institute (API)

API RP 41-1995(2010) Recommended Practice for Presenting Performance Data on Cementing and Hydraulic Fracturing Equipment

ACI - American Concrete Institute

ACI 544.9R-2017 Report on Measuring Mechanical Properties of Hardened Fiber-Reinforced Concrete