intraday repeatability

intraday repeatability, Total:128 items.

The international standard classification for "intraday repeatability" includes: Surgical instruments and materials , Protection against dangerous goods , Chemical reagents , Footwear , Graphic technology in general .

The Chinese standard classification for "intraday repeatability" includes: Other special devices , Marking, packaging, transport and storage in general , Mass spectrometer, liquid spectrometer, energy spectrometer and combined devices of them , Footgear , Micro and copier machinery .

Professional Standard - Medicine

YY/T 1783-2021 Endoscopic surgical instruments-Reusable abdominal trocar
YY/T 1846-2022 Endoscopic surgical instruments-Reusable abdominal suction and irrigation tubes

Group Standards of the People's Republic of China

T/GDC 46-2020 Bacteriostatic and reusable daily protective mask
T/CSTM 00387-2020 Reusable daily protective mask
T/CSTM 00387E-2021 Reusable daily protective mask
T/CNCIA 01034-2024 Waterborne coatings for non-refillable steel welded cylinders

未注明发布机构

P18-550 (1982-04-01) Repeatability and reproducibility of pellet samples
VDS 3148:2012-03 Guideline for repeated testing of Door-Fan tests

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 38038-2019 Footwear—Test methods for slide fasteners—Resistance to repeated opening and closing
GB/T 15956-2008 Calcium carbide steel drum for repeated use
GB/T 35410-2017 Method of performance testing for liquid chromatography-tandem quadrupole mass spectrometry

Professional Standard - Light Industry

QB/T 5215-2017 Test method for the repetitive compressibility of shoes heel

Fujian Provincial Standard of the People's Republic of China

DB35/T 940-2009 Rehydrated sun-dried bamboo shoots in soft cans

Professional Standard - Machinery

JB/T 6157-2007 Diazo copying machine
JB/T 6797.5-1993 Maintenance Guarantee of Diazo Copier Maintenance Guide
JB/T 6797.5-2007 Servicing directives for diazo copying machine-Guarantee of servicing feasibility

International Telecommunication Union (ITU)

ITU-T G.213-1972 Interconnection of systems in a main repeater station
ITU-T G.532-1976 General characteristics of repeaters for 2-wire circuits
ITU-T Q.264-1984 Signalling procedures: Potential for automatic repeat attempt and re-routing

American Petroleum Institute (API)

API SPEC 5LD CHINESE-2009 Specification for CRA Clad or Lined Steel Pipe (Third Edition; Effective: September 1@ 2009)

IETF - Internet Engineering Task Force

RFC 7529-2015 Non-Gregorian Recurrence Rules in the Internet Calendaring and Scheduling Core Object Specification (iCalendar)

Korean Agency for Technology and Standards (KATS)

KS V ISO 21072-3:2012 Ships and marine technology－Marine environment protection：performance testing of oil skimmers－Part 3：High viscosity oil
KS Q ISO 21748:2018 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
KS Q ISO 21748-2018 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
KS Q ISO TR 12888-2016 Selected illustrations of gauge repeatability and reproducibility studies
KS A ISO TR 21074:2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
KS P ISO 21533:2011 Dentistry-Reusable cartridge syringes intended for intraligamentary injections
KS C 6304-2003 REPEATING COILS
KS A ISO TR 21074-2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
KS Q ISO TR 12888-2021 Selected illustrations of gauge repeatability and reproducibility studies
KS Q ISO TR 12888:2016 Selected illustrations of gauge repeatability and reproducibility studies
KS Q ISO TR 12888-2016(2021) Selected illustrations of gauge repeatability and reproducibility studies
KS P ISO 21533-2017 Dentistry－Reusable cartridge syringes intended for intraligamentary injections
KS C IEC 61923-2002(2022) Household electrical appliances－Method of measuring performance－Assessment of repeatability and reproducibility
KS C IEC 61923-2002(2017) Household electrical appliances－Method of measuring performance－Assessment of repeatability and reproducibility
KS B 6007-2019 Temperature measurements of performance for reciprocating internal combustion engines

Canadian General Standards Board （CGSB)

CAN/CGSB-43.116-M90-1990 Polyethylene Lined Non-Reusable Steel Drums (TC-37P)

Bureau of Indian Standards

IS 17514-2021 Reusable Sanitary Pad / Sanitary Napkin / Period Panties â€” Specification
IS 18780-2024 Dentistry - Reprocessable Cartridge Syringes for Intraligamentary Injections

Ente Nazionale Italiano di Unificazione

UNI 6808:1972 Statistical methods for quality, control. Series of duplicated observations. Estimate of the repeatibility.
UNI ISO/TS 27878:2024 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
UNI EN ISO 21533:2004 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
UNI EN 17037:2021 Daylight in buildings
UNI EN 17037:2019 Daylight in buildings
UNI EN 17037:2022 Daylight in buildings
UNI ISO 3046-3:1985 Reciprocating internal combustion engines. Performance. Test measurements.
UNI ISO 3046-3:2000 Reciprocating internal combustion engines - Performance - Test measurements
UNI ISO 3046-2:1984 Reciprocating internal combustion engines. Performance. Test methods.

British Standards Institution (BSI)

BS PD ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
BS 5514-4:1979 Reciprocating internal combustion engines. Performance-Speed governing
BS EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
BS EN 17037:2018 Daylight in buildings
PD ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
BS PD ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
BS EN 17037:2018+A1:2021 Daylight in buildings
BS EN 17037:2018(2021) Daylight in buildings
BS ISO 3046-4:2009 Reciprocating internal combustion engines - Performance - Speed governing
BS ISO 3046-5:2002 Reciprocating internal combustion engines - Performance - Torsional vibrations
BS 5514-5:1979 Reciprocating internal combustion engines. Performance-Torsional vibrations
BS ISO 3046-3:2006 Reciprocating internal combustion engines - Performance - Test measurements
BS ISO 3046-5:2001 Reciprocating internal combustion engines. Performance - Torsional vibrations
BS 5514-2:1988 Reciprocating internal combustion engines. Performance-Test methods
BS ISO 3046-6:2020 Reciprocating internal combustion engines. Performance - Overspeed protection
BS ISO 3046-4:2010 Reciprocating internal combustion engines. Performance. Speed governing
BS EN 932-6:1999 Tests for general properties of aggregates - Definitions of repeatability and reproducibility

Danish Standards Foundation

DANSK DS/ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
DANSK DS/EN 17037/AC:2018 Daylight in buildings
DANSK DS/EN 17037+A1:2022 Daylight in buildings
DANSK DS/ISO/TR 12888:2012 Selected illustrations of gauge repeatability and reproducibility studies
DS/ISO/TR 12888:2012 Selected illustrations of gauge repeatability and reproducibility studies
DANSK DS/EN 17037:2018 Daylight in buildings

Association Francaise de Normalisation

XP X06-083*XP ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
FD ISO/TR 12888:2011 Selected illustrations of repeatability and reproducibility studies by caliber
NF ISO 14972:1999 Obturateurs stériles non réutilisables pour cathéters intravasculaires périphériques à aiguille interne
NF EN ISO 11070:2015 Introducteurs, dilatateurs et guides intravasculaires stériles non réutilisables
FD X06-093*FD ISO/TR 12888:2011 Selected illustations of gauge repeatability and reproducibility studies
NF E37-213:1993 Reciprocating internal combustion engines. Performances. Torsional vibrations.
NF EN ISO 10555-5:2013 Cathéters intravasculaires - Cathéters stériles et non réutilisables - Partie 5 : cathéters périphériques à aiguille interne

American Water Works Association (AWWA)

AWWA WQTC57021 The Increasing Complexity and Challenges of the New Drinking Water Regulations

PL-PKN

PN M36163-1991 Reciprocating internal combustion engines. Performance. Speed governing
PN M36164-1991 Reciprocating internal combustion engines. Performance. Torsional vibrations
PN M36165-1991 Reciprocating internal combustion engines. Performance. Overspeed protection
PN M36161-1991 Reciprocal internal combustion engines. Performance. Test methods
PN M36162-1991 Reciprocating internal combusion engines. Performance. Test measurements
PN J02500-1991 Unsealed radioactive sources. Estimation of repeatability of analytical methods

Japanese Industrial Standards Committee (JISC)

JIS Z 2811:2021 Test method for repetitiveness of bacteria reduction activity
JIS B 9504:1977 Printing width for diazo copying machines

International Electrotechnical Commission (IEC)

CISPR 11-2015+AMD1-2016+AMD2-2019 CSV Requirements for semiconductor power converters (SPC)/ Improvement of repeatability for measurements in the frequency range 1-18 GHz
CISPR 11:2015+AMD1:2016+AMD2:+AMD2:2019 CSV Requirements for semiconductor power converters (SPC)/ Improvement of repeatability for measurements in the frequency range 1-18 GHz
CISPR 11-2019 Requirements for semiconductor power converters (SPC)/ Improvement of repeatability for measurements in the frequency range 1-18 GHz
CISPR 11:2015+AMD1:2016+AMD2:2019 CSV Requirements for semiconductor power converters (SPC)/ Improvement of repeatability for measurements in the frequency range 1-18 GHz

International Commission on Illumination (CIE)

CIE 184:2009 Indoor Daylight Illuminants
CIE 184-2009 INDOOR DAYLIGHT ILLUMINANTS

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0493-200 E*DIN VDE 0493-200:2009-01 Radiation protection instrumentation – Periodic testing of installed in-vivo counters

International Organization for Standardization (ISO)

ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies

Underwriters Laboratories (UL)

UL 80-1980 UL Standard for Safety Steel Inside Tanks for Oil-Burner Fuel (Ninth Edition; Reprint with Revisions Through and Including April 26@ 1993)
UL 219-2013 UL Standard for Safety Lined Fire Hose for Interior Standpipes (Fourth Edition; Reprint with Revisions Through and Including December 11@ 2018)
UL 1777-2015 UL Standard for Safety Chimney Liners (Fifth Edition; Reprint with Revisions Through and Including April 11@ 2019)
UL 19-1995 UL Standard for Safety Lined Fire Hose and Hose Assemblies (Eleventh Edition; Reprint with Revisions Through and Including May 23@ 1996)

National Aeronautics and Space Administration (NASA)

NASA NPD 1040.4 REV A-2004 NASA CONTINUITY OF OPERATIONS (REVALIDATED 3/29/04)

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.6.23-1993 Test Procedure for Steam Ager Temperature Repeatability

German Institute for Standardization

DIN 5034-5:1993 Daylight in interiors; measurement
DIN EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003); German version EN ISO 21533:2003
DIN EN 17037:2019-03 Daylight in buildings
DIN ISO 5725:1988-04 Precision test method repeatability and reproducibility determination Determine the repeatability and reproducibility of standard test methods through interlaboratory testing
DIN EN 17037:2022-05 Daylight in buildings; German version EN 17037:2018+AC:2021+A1:2021

ACI - American Concrete Institute

ACI 364.5T-2010 Importance of Modulus of Elasticity in Surface Repair Materials

American Concrete Institute

ACI PRC-364.5-21 TechNote Importance of Modulus of Elasticity in Surface Repair Materials—TechNote

European Committee for Standardization (CEN)

EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections

CEN - European Committee for Standardization

EN ISO 21533:2018 Dentistry - Reprocessable cartridge syringes for intraligamentary injections

Standards Norway

NS-EN 17037:2018 Daylight in buildings
NS-EN 17037:2018+AC:2021 Daylight in buildings
NS-EN 17037:2018+A1:2021 Daylight in buildings

Spanish Association for Standardization (UNE)

UNE-EN 17037:2020+A1:2022 Daylight in buildings
UNE-EN 17037:2020/AC:2022 Daylight in buildings
AENOR UNE-EN ISO 21533:2004 Odontology. Reusable syringes for intra-ligament injections (ISO 21533:2003)

American Society for Testing and Materials (ASTM)

ASTM F1992-99 Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
ASTM F1992-99(2007) Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes

GCC Standardization Organization

GSO ISO 21533:2015 Dentistry -- Reusable cartridge syringes intended for intraligamentary injections

IX-CISPR

CISPR 11:2015/AMD1:2016/AMD2:2019 CSV Requirements for semiconductor power converters (SPC)/ Improvement of repeatability for measurements in the frequency range 1-18 GHz