How to use the chord

How to use the chord, Total:130 items.

The international standard classification for "How to use the chord" includes: Aerospace engines and propulsion systems , Chemical reagents .

The Chinese standard classification for "How to use the chord" includes: Engine , Chemical reagent in general .

未注明发布机构

DIN EN ISO 7784-2 E:2014-07 Determination of the abrasion resistance of paints and varnishes Part 2: Method using abrasion-resistant rubber wheels and rotating specimens (draft)
ASTM RR-D04-1037 2011 D7226-Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM RR-D04-1038 2011 D7226-Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
DIN EN ISO 7784-2 E:2022-05 Determination of the abrasion resistance of paints and varnishes Part 2: Method using abrasion-resistant rubber wheels and rotating specimens (draft)
DIN EN ISO 7784-1 E:2014-07 Determination of abrasion resistance of paints and varnishes Part 1: Method using abrasive paper covering wheels and rotating specimens (draft)
ASTM RR-D22-1033 2010 D4532-Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
ASTM RR-D04-1031 2009 D7226-Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM RR-D04-1024 2005 D7226-Standard Test Method for Determining the Viscosity ofEmulsified Asphalts Using a Rotational Paddle Viscometer
ASTM RR-G01-1025 2012 G0202- Test Method for Using Atmospheric Pressure Rotating Cage
DIN EN ISO 7784-1 E:2022-05 Determination of abrasion resistance of paints and varnishes Part 1: Method using abrasive paper covering wheels and rotating specimens (draft)

Professional Standard - Aerospace

QJ 1813.2-2005 Determining methods for viscosity and pot life of composite solid propellant slurry Part 2:Method by rotational viscometer

Professional Standard - Petroleum

SY/T 5375-1995 Selection method of rotary drilling equipment

Professional Standard - Machinery

JB/T 9793.2-1999 Test methods for agricultural screw press

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 613-2007 Chemical reagent - General method for the determination of specific optical rotatory power (specific optical rotation)

American Society for Testing and Materials (ASTM)

ASTM G202-12(2020) Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G202-12(2016) Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G73-10(2017) Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM D4402/D4402M-15 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
ASTM D4402/D4402M-23 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
ASTM D4016-14 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer 40;Laboratory Method41;
ASTM F2059-17 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Swirling Flask
ASTM D7226-13(2017) Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM D1422/D1422M-13(2020) Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
ASTM C1800/C1800M-16 Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
ASTM D5289-06 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D6595-17 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM F907-85E01R92 Test Method for Measurement of Rotational Acceleration of a Wafer for Photoresist Spin Coating
ASTM F907-85(1992)e1 Test Method for Measurement of Rotational Acceleration of a Wafer for Photoresist Spin Coating

IN-BIS

IS 12629-1989 Water Well Drilling—Rotary Hose for Rotary Drilling—Recommended Practices for Care and Use
IS 9919-1981 Rotary Motor Carbon Brush Selection and Use Guide
IS 8426 Pt.1-1977 Methods for measuring the properties of gyromagnetic materials used at microwave frequencies Part I Magnetization

British Standards Institution (BSI)

BS EN ISO 7784-1:2023 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive-paper covered wheels and rotating test specimen
BS EN ISO 7784-2:2023 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive rubber wheels and rotating test specimen
BS EN ISO 7784-2:2016 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive rubber wheels and rotating test specimen
BS EN ISO 7784-1:2016 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive-paper covered wheels and rotating test specimen
BS 5381-8:1997 Methods for determination of physical properties of tobacco and tobacco products. Loss of tobacco from cigarette ends using a rotating cubic box (sismelatophore)
BS EN 14278-3:2004 Textiles - Determination of cotton fibres stickiness - Method using an automatic thermodetection rotating drum device
BS ISO 25597:2013(2015) Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
22/30450774 DC BS ISO 7784-2. Paints and varnishes. Determination of resistance to abrasion. Part 2. Method with abrasive rubber wheels and rotating test specimen
BS 5381-7:1997 Methods for determination of physical properties of tobacco and tobacco products. Loss of tobacco from cigarette ends using a rotating cylindrical cage

ES-AENOR

UNE 127-005 Pt.1-1990 cement brick. Wear resistance measurement. How to use a swing or rotating platform

RU-GOST R

GOST 32393-2013 Petroleum products. Determination of pour point by rotational method

Korean Agency for Technology and Standards (KATS)

KS V 7310-2006(2011) Application for marine valves and cocks
KS V 7310-2006 Application for marine valves and cocks
KS M ISO 7784-2-2022 Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen
KS H ISO 3550-2:2007 Cigarettes－Determination of loss of tobacco from the ends－Part 2：Method using a rotating cubic box(sismelatophore)
KS F 2392-2014 Standard test method for viscosity determination of asphalt binder using rotational viscometer
KS H ISO 3550-2-2022 Cigarettes－Determination of loss of tobacco from the ends－Part 2：Method using a rotating cubic box(sismelatophore)
KS F 2392-2019 Standard test method for viscosity determination of asphalt binder using rotational viscometer
KS H ISO 3550-1-2019 Cigarettes－Determination of loss of tobacco from the ends－ Part 1：Method using a rotating cylindrical cage

GSO

OS GSO ISO 3550-2:2015 Cigarettes -- Determination of loss of tobacco from the ends -- Part 2: Method using a rotating cubic box (sismelatophore)
GSO ISO 3550-1:2015 Cigarettes -- Determination of loss of tobacco from the ends -- Part 1: Method using a rotating cylindrical cage
BH GSO ISO 3550-1:2016 Cigarettes -- Determination of loss of tobacco from the ends -- Part 1: Method using a rotating cylindrical cage
GSO ISO 3550-2:2015 Cigarettes -- Determination of loss of tobacco from the ends -- Part 2: Method using a rotating cubic box (sismelatophore)
BH GSO ISO 18080-2:2022 Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2: Test method using rotary mechanical friction
GSO ISO 18080-2:2021 Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2: Test method using rotary mechanical friction
GSO ISO 25597:2015 Stationary source emissions -- Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution

AGMA - American Gear Manufacturers Association

93FTM3-1993 A Rayleigh-Ritz Approach to Determine Compliance and Root Stresses in Spiral Bevel Gears Using Shell Theory

BR-ABNT

ABNT P-NB-155-1967 The use of pipe flange semi-metallic spiral joints

SCC

DANSK DS/ISO 7784-2:2023 Paints and varnishes – Determination of resistance to abrasion – Part 2: Method with abrasive rubber wheels and rotating test specimen
DANSK DS/ISO 3550-2:1997 Cigarettes - Determination of loss of tobacco from the ends - Part 2: Method using a rotating cubic box (sismelatophore)
AWWA ACE90069 Hows and Whys of CTs
AASHTO T 316-2019 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
AASHTO T 316-2011 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
AASHTO T 316-2006 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
AASHTO T 316-2013(2017) Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
DANSK DS/EN ISO 7784-2:2016 Paints and varnishes – Determination of resistance to abrasion – Part 2: Method with abrasive rubber wheels and rotating test specimen
VDI 2727 BLATT 3-1996 Design catalogues — Solution of motion tasks with gears — Generation of unidirectional rotary movements with detent(s) — Drive rotating in the same direction
AASHTO T 312-2004 Standard Method of Test for Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASME B89.3.4M-1985(R1992) Axes of Rotation - Methods for Specifying and Testing
DANSK DS/ISO 3550-1:1997 Cigarettes - Determination of loss of tobacco from the ends - Part 1: Method using a rotating cylindrical cage
AASHTO T 344-2022 Standard Method of Test for Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading (ASTM Designation: D7115-05)
ASTM F2059-06(2011)e1 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask
AASHTO T 312-2009 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
12/30230597 DC BS ISO 25597. Stationary source emissions. Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
AASHTO T 312-2011 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
AS 1359.31:1986 Rotating electrical machines - General requirements - Service and operating conditions
AENOR UNE-EN ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016)

Association Francaise de Normalisation

NF EN ISO 7784-2:2023 Paints and varnishes - Determination of resistance to abrasion - Part 2: method using rubber abrasive wheels and a rotating test piece
NF V37-015-2*NF ISO 3550-2:1997 Cigarettes. Determination of loss of tobacco from the ends. Part 2 : method using a rotating cubic box (sysmelatophore).
NF ISO 3550-2:1997 Cigarettes - Determination of tobacco loss through ends - Part 2: method using a cubic rotating box (sismelatophore)
NF EN 12697-3+A1:2018 Mélanges Bitumineux - Méthodes d'essai - Partie 3 : extraction des bitumes à l'évaporateur rotatif
NF EN 12697-3/IN1:2018 Mélanges Bitumineux - Méthodes d'essai - Partie 3 : extraction des bitumes à l'évaporateur rotatif
NF EN ISO 7784-1:2023 Paints and varnishes - Determination of resistance to abrasion - Part 1: Method using wheels covered with abrasive paper and a rotating test piece
NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution

AENOR

UNE-ISO 3550-2:2011 Cigarettes. Determination of loss of tobacco from ends. Part 2: Method using a rotating cubic box (sismelatophore)
UNE-ISO 3550-1:2011 Cigarettes. Determination of loss of tobacco from ends. Part 1: Method using a rotating cylindrical cage.

Danish Standards Foundation

DS/ISO 3550-2:1998 Cigarettes - Determination of loss of tobacco from the ends - Part 2: Method using a rotating cubic box (sismelatophore)
DS/ISO 3550-1:1998 Cigarettes - Determination of loss of tobacco from the ends - Part 1: Method using a rotating cylindrical cage
DS/EN 28 325:1991 Dental rotary instruments - Test methods

The American Road & Transportation Builders Association

AASHTO T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
AASHTO T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
AASHTO T 316-2022 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
AASHTO TP48-1997 Standard Test Method for Viscosity Determination of Asphalt Binder Using Rotational Viscometer 2000 Edition
AASHTO T 344-2012 Standard Method of Test for Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

AASHTO - American Association of State Highway and Transportation Officials

TP48-1997 Standard Test Method for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2004 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2006 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2011 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
TP4-1993 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the SHRP Gyratory Compactor (Edition 1C)
TP4-2000 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor (2000 Edition)
TP 71-2009 Standard Method of Test for Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
TP 71-2007 Standard Method of Test for Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
T 344-2012 Standard Method of Test for Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

International Organization for Standardization (ISO)

ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen
ISO 3550-2:1997 Cigarettes - Determination of loss of tobacco from the ends - Part 2: Method using a rotating cubic box (sismelatophore)
ISO 7784-1:2016 Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results

ES-UNE

UNE-EN ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016)
UNE 18150:1987 ERRATUM METHOD OF DIMENSION MEASURES AND ROTATION PRECISION.
UNE-EN ISO 7784-2:2023 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2023)

Standard Association of Australia （SAA）

AS/NZS 2891.2.2:2014 Asphalt Sampling and Testing Methods Sample Preparation Compaction of Asphalt Test Samples Using a Rotary Compactor
AS 2341.4:1994 Methods of testing bitumen and related roadmaking products - Determination of dynamic viscosity by rotational viscometer

VDI - Verein Deutscher Ingenieure

VDI 2727 Blatt 3-1994 Catalogues for machine design - Mechanisms for motion transfer - Converting unidirectional rotation into intermittent rotation

Japanese Industrial Standards Committee (JISC)

JIS B 6542:1991 Veneer lathes -- Test and inspection methods
JIS S 2075:2011 Measurement method of efficiency for domestic gas and oil water heater under standard usage mode

American National Standards Institute （ANSI)

ANSI/ASME B89.3.4-2010 Axes of Rotation Methods for Specifying and Testing
ANSI/ASME B89.3.4M-1985 Axes of Rotation, Methods for Specifying and Testing

American Society of Mechanical Engineers (ASME)

ASME B89.3.4-2010 Axes of Rotation: Methods for Specifying and Testing
ASME B89.3.4-2010(R2019) Axes of Rotation: Methods for Specifying and Testing
ASME B89.3.4M-1985 Axes of rotation - Methods for specifying and testing

German Institute for Standardization

DIN ISO 3550-1:2005-02 Cigarettes - Determination of loss of tobacco from the ends - Part 1: Method using a rotating cylindrical cage (ISO 3550-1:1997)
DIN EN ISO 7784-2:2023 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2023)
DIN EN ISO 7784-2:2023-05 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2023); German version EN ISO 7784-2:2023

KR-KS

KS K ISO 18080-2-2023 Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2: Test method using rotary mechanical friction

HU-MSZT

MSZ 806/4-1970 Rules for safe use of electrical appliances and degree of product rotation

TR-TSE

TS 3210-1978 Rotating Electrical Machines Methods Of Cooling Rotating Machinery

(U.S.) Ford Automotive Standards

FORD ESA-M2P13-A-2008 PAINT QUALITY, COIL SPRINGS ***TO BE USED WITH FORD WSS-M99P1111-A***