Standards Development Program

Standards Development Program, Total:458 items.

The international standard classification for "Standards Development Program" includes: Standardization. General rules , Rubber , Rubber and plastics products , Medical Sciences and health care facilities in general .

The Chinese standard classification for "Standards Development Program" includes: Supply and Use Relation , Rubber products in general , Diagnostic standard for public nuisance diseases , Technical Management , Electric power testing technique .

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1214-2018 local standards
DB61/T 1214-2020 local standards
DB6108/T 42-2022 Guidelines for formulation and revision of local standards
DB6101/T 3168-2023 Local standards setting specifications

Xinjiang Provincial Standard of the People's Republic of China

DB6523/T 337-2022 Local standard formulation work specification

Qinghai Provincial Standard of the People's Republic of China

DB63/T 1789-2020 Local standard formulation work specification

Shanxi Provincial Standard of the People's Republic of China

DB1403/T 16-2023 Guidelines for the formulation of local standards
DB14/T 1665-2018 Local standard formulation work specification
DB14/T 1665-2022 Local standard formulation work specification
DB1403/T 16-2022 Guidelines for the formulation of local standards

Jilin Provincial Standard of the People's Republic of China

DB22/T 2666-2017 Work procedures for local standard formulation

Group Standards of the People's Republic of China

T/CECS 1528-2024 Standards for preparing plans for urban watershed water environment management systems
T/HBPEA 001-2021 Group standard setting procedure specification
T/CSTM 00002-2019 Preparation principles of measurement methods standards
T/JGE 3002-2021 General rules forevaluation scheme of jiangxi enterprise forerunner standard
T/CAS 765-2023 Recognition standards for knowledge system of eco-environmental cases
T/QDAS 001-2016 Group standard formulation and revision procedures
T/SBMIA 003-2018 Criterion of customized home worktops installation
T/LNPC 001-2022 Guideline for service of standard development
T/SBMIA 005-2018 Criterion of customized home furnishings and services
T/CI 028-2023 General Principles for the Establishment of Foreign Introducing Traditional Chinese Medicine
T/SXHK 001-2019 Standard preparation regulations
T/GDMA 9-2019 Social organization standard formulation service requirement
T/NKFA 005-2022 Furniture enterprises—Evaluation standard of improvement proposal
T/SCTIA 001-2021 Group standard setting procedure specification
T/CACM 015.1-2017 Specifications for formulation of randomized controlled clinical research protocols of traditional Chinese medicine
T/CFDCC 0307-2024 Delivery standard for customized home decoration

Hainan Provincial Standard of the People's Republic of China

DB46/T 74-2018 Work procedures for formulation and revision of local standards
DB46/T 74-2021 Local standard formulation and revision work specifications
DB46/T 74-2007 Standardization management standardizes local standard formulation work procedures

未注明发布机构

DIN EN 4618 E:2013-04 Aerospace series - Aircraft internal air quality standards, criteria and determination methods
DIN EN ISO 21432 E:2020-06 Standard test method for nondestructive testing of residual stress by neutron diffraction (draft)
DIN EN 15852 E:2008-09 Ambient air quality - Standard method for the determination of total gaseous mercury
DIN EN 15841 E:2008-08 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
DIN EN ISO 12863 E:2021-08 Standard test method for assessing the ignition tendency of cigarettes (draft)
DIN EN ISO 6427 E:2014-01 Determination of extractable substances in plastics using organic solvents (standard method) (draft)
DIN EN 17346 E:2019-03 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 61360-2 E:2008-04 Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema
DIN EN 15853 E:2008-09 Ambient air quality - Standard method for the determination of mercury deposition

Professional Standard - Military and Civilian Products

WJ 2381-1997 Standard Drawing Regulations
WJ 1637-1986 Standard solution preparation and calibration (restricted standard)

Shandong Provincial Standard of the People's Republic of China

DB37/T 008-1989 General regulations on the formulation and revision of local standards in Shandong Province

中华人民共和国环境保护部

GB/T 3840-1991 Technical methods for making local emission standards of air pollutants

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 17017-1997 Control STANDARD for endemic fluorosis area
GB/T 14838-2009 Rubber and rubber products - Determination of precision for test method standards
GB/T 14838-1993 Rubber and rubber products-Determination of precision for test method standards
GB/T 16760-1997 Preparation of standard methods of measuring performance (SMMP) of consumer goods

Professional Standard - Electron

SJ 1.7-1987 Requirements for complete documents and related materials when standards drafts submitted for approval
SJ 1.8-1987 Provision and requirements for preparation and revision of technical standards for electronic industry-Requirements that should be followed during standards-writing
SJ 1.5-1987 Provision and requirements for preparation and revision of technical standards for electronic industry-Procedures for review of standards drafs by correspondence

Guangdong Provincial Standard of the People's Republic of China

DB44/T 2461-2024 Pollutant Emission Standards for Livestock and Poultry Breeding Industry

Military Standard of the People's Republic of China-General Armament Department

GJB 1886A-2019 Preparation and standardization for standard solutions
GJB 1886-1994 Preparation and calibration of standard solutions

Professional Standard-Ships

CB/T 8526-2017 Regulations on the preparation of planning schemes for fixed asset investment projects

Professional Standard - Chemical Industry

HG 3-1168-1978 Preparation and Determination Method of Chemical Reagent Clarity Standard

Taiwan Provincial Standard of the People's Republic of China

CNS 13162-1993 Form of Proposals for the Establishment of Standards

秦皇岛市市场监督管理局标准化科

DB1303/T 320-2022 Guidelines for formulating inspection plans for special equipment electromechanical

Professional Standard - Railway

TB/T 10503-2005 Standard for water and soil conservation plan of railway construction projects
TB/T 10503-2005（条文说明） Standard for water and soil conservation plan of railway construction projiects

Professional Standard - Aerospace

QJ 1835.12-1990 Provisions on Standard Review of the Management Measures for the Amendment of Aerospace Industry Standards

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 3333-2022 Guidelines for formulation and revision of local standards

Henan Provincial Standard of the People's Republic of China

DB4117/T 350-2022 Local standard formulation and revision work specifications

Professional Standard - Construction Standards for Engineering Projects of the Ministry of Construction

建标 103-2008 Construction standard of archive museum

Professional Standard - Electricity

DL/T 1002-2006 Calibration for low-level dissolved oxygen meter -- Standard gases calibration

Fujian Provincial Standard of the People's Republic of China

DB3505/T 1-2023 Guidelines for the formulation and revision of local standards

Anhui Provincial Standard of the People's Republic of China

DB34/T 2800-2020 Guidelines for formulation and revision of local standards
DB34/T 2800-2016 Guidelines for formulation and revision of local standards

Beijing Provincial Standard of the People's Republic of China

DB11/T 1001-2009 Enterprise standard formulation principles and procedures

SCC

ANS 3.8.3-1987 Criteria for Emergency Response Plans and Implementing Procedures
AWWA ACE69108 Alternative Evaluations and Design Criteria Development for a New Water Intake on Lake Erie
AWWA JAW39311 Journal AWWA — Legislation/Regulation -- Setting Standards: Legislative Proposals
DIN EN 15853 E:2008 Draft Document - Ambient air quality - Standard method for the determination of mercury deposition; German version prEN 15853:2008
DIN EN 15852 E:2008 Draft Document - Ambient air quality - Standard method for the determination of total gaseous mercury; German version prEN 15852:2008
AENOR UNE 0000:1985 GUIDE FOR THE PREPARATION OF STANDARDS
DIN EN 14790 E:2014 Draft Document - Stationary source emissions - Determination of the water vapour in ducts - Standard reference method; German version prEN 14790:2014
AWWA CSC94004 Developing Database Standards
UL Subject 508A-2020 Standard for Industrial Control Panels (CSDS Proposal 7/10/2020)
UL Subject 2182-2016 Standard for Refrigerants (CSDS Proposal, 10/28/2016)
SN-CWA 15535-2:2006 Multi-application multi-issuer citizen card scheme standardisation — Part 2: Scheme architecture and implementation solution
UL Subject 563-2016 Standard for Ice Makers (CSDS Proposal, 11/18/2016)
DIN EN 14791 E:2014 Draft Document - Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version prEN 14791:2014
DIN EN 4618 E:2013 Draft Document - Aerospace series - Aircraft internal air quality standards, criteria and determination methods; German and English version prEN 4618:2013
VDI 2222 BLATT 1-1997 Design methodology — methodical development of solution principles
AENOR UNE 26110:2018 Road vehicles. Criteria for the evaluation of the equivalence of braking efficiency methods with respect to those defined in the ISO 21069 Standard.
UL Subject 353-2011 Standard for Limit Controls (CSDS Proposal, 8/26/2011)
DIN 23011-7 Supplement 1 E:2008 Draft Document - Preparation of hard coal - Preparation plants - Part 7: Equipment monitoring; Supplement 1: Means of applications of the standard
UL Subject 427-2016 Standard for Refrigerating Units (CSDS Proposal, 12/30/2016)
DIN EN 14789 E:2014 Draft Document - Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism; German version prEN 14789:2014
AWWA WQTC62541 Development of Distribution System Water Quality Optimization Plans
DIN 64080 E:2005 Draft Document - Card for cotton spinning - Terms and definitions, types of construction (Proposal for an ISO standard)
BS EN 61360-1:1996 Standard data element types with associated classification scheme for electric components-Definitions. Principles and methods
CEI EN 61360-1:2018 Standard data element types with associated classification scheme Part 1: Definitions - Principles and methods
AENOR UNE 0001:1970 Preparation of standardized methods for testing the fitness for use of consumer goods (MNFA).
ISEA 121-2018 American National Standard for Dropped Object Prevention Solutions
BS PD 6662:2000 Scheme for the application of European Standards for intruder alarm systems
AWWA WQTC65875 Managing Manganese: Understanding Sources to Develop Solutions
DIN ISO 14146 E:2017 Draft Document - Radiological protection - Criteria and performance limits for the periodic evaluation of dosimetry services (ISO/DIS 14146:2016)
BS EN 61360-1:2002 Standard data element types with associated classification scheme for electric components-Definitions. Principles and methods
DIN 820-120/A1 E:2011 Draft Document - Standardization - Part 120: Guidelines for the inclusion of safety aspects in standards (ISO/IEC Guide 51:1999); Amendment 1
SN-CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
SES 2:2011 Model Procedure for the Development of Standards
DANSK DS/CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
AWWA ACE94163 Setting Drinking Water Standards in Europe
AASHTO R 9-2005(2022) Standard Practice for Acceptance Sampling Plans for Highway Construction
DIN EN 4666 E:2013 Draft Document - Aerospace series - Aircraft integrated air quality and pressure standards, criteria and determination methods; German and English version prEN 4666:2013
VDI 2222 BLATT 1-1997 Design methodology — methodical development of solution principles
DIN EN 17346 E:2019 Draft Document - Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling; German and English version prEN 17346:2019
DIN EN 14602 E:2012 Draft Document - Footwear - Test methods for the assessment of ecological criteria; German version FprEN 14602:2012
AWPA A19-93 Standard Method for Sample Preparation for Determining Penetration of Preservatives in Wood
AWWA CSC91021 A Fast Track Approach Produces Custom Solutions for Automation
UL Subject 183-2016 Standard for Manufactured Wiring Systems (CSDS Proposal, 3/4/2016)
DANSK DS/CEN GUIDE 15:2012 Guidance document for the development of service standards
UL Subject 244A-2013 Standard for Solid-State Controls for Appliances (CSDS Proposal, 4/12/2013)
DIN 58189 E:2019 Draft Document - Fundamental standards for optics - Determination of focal length
DIN IEC 60059 E:2007 Draft Document - IEC standard current ratings (IEC 8/1219/CD:2006)
DIN EN 14792 E:2014 Draft Document - Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence; German version prEN 14792:2014
UL Subject 412-2016 Standard for Refrigeration Unit Coolers (CSDS Proposal, 10/28/2016)
AWPA A19-08 Standard Method for Sample Preparation for Determining Penetration of Preservatives in Wood
DIN EN 18025 E:2023 Draft Document - Water quality - Guidance standard on a strategic approach to river restoration; German and English version prEN 18025:2023
DANSK DS/EN 61360-1:2017 Standard data element types with associated classification scheme – Part 1: Definitions – Principles and methods
DIN CEN/TR 17911:2023 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content; German version CEN/TR 17911:2023
AWPA A19-14 Standard Method for Sample Preparation for Determining Penetration of Preservatives in Wood
ADA 33-2003(R2014) Dental Product Standards Development Vocabulary
DIN EN 61360-1 E:2016 Draft Document - Standard data elements types with associated classification scheme for electric items - Part 1: Definitions - Principles and methods (IEC 3D/265/CDV:2016); German version FprEN 61360-1:2016
DIN 32633 E:2012 Draft Document - Chemical analysis - Methods of Standard addition - Procedure, evaluation
AWPA A19-17 Standard Method for Sample Preparation for Determining Penetration of Preservatives in Wood
BS PD CEN/TR 17911:2023 Stationary source emissions. Guideline for the elaboration of standardized measurement methods. Recommendations for the structure and content
DIN 1045-40 E:2022 Draft Document - Concrete Structures - Part 40: Rules for precast concrete elements that do not comply with any specific standard
UL Subject 987-2015 Standard for Stationary and Fixed Electric Tools (CSDS Proposal, 2/13/2015)
ASA S12.1-1983(R2023) American National Standard for Guidelines for the Preparation of Standard Procedures to Determine the Noise Emission from Sources.
UL Subject 69-2013 Standard for Electric-Fence Controllers (CSDS Proposal, 5/24/2013)
DIN 820-3 E:2019 Draft Document - Standardization - Part 3: Terms and definitions
AENOR UNE-EN ISO 17782:2019 Petroleum, petrochemical and natural gas industries - Scheme for conformity assessment of manufacturers of special materials (ISO 17782:2018) (Endorsed by Spanish Association for Standardization in January of 2019.)
DANSK DS/CEN/TR 17911:2023 Stationary source emissions – Guideline for the elaboration of standardized measurement methods – Recommendations for the structure and content
05/30132248 DC EN 14547. Sampling schemes for third party conformity assessment of fineness in precious metal articles
ASHRAE 218-2019 Standard 218-2019 -- Method of Test for Lubricant and Refrigerant Miscibility Determination (ANSI Approved)
DIN EN 17940 E:2023 Draft Document - Glass in Building - Folio Interlayers for the Manufacturing of Laminated Glass - Product standard; German and English version prEN 17940:2023
UL Subject 294-2018 Standard for Access Control System Units (CSDS Proposal, 8/3/2018)
UNE-EN 61360-1:2005 Standard data element types with associated classification scheme for electric components -- Part 1: Definitions - Principles and methods
ASTM STP 1349-98 Roofing Research & Standards Development : STP 1088

British Standards Institution (BSI)

ASME Y14.46-2017 Product Definition for Additive Manufacturing [Draft Standard for Trial Use]
BS 0-1:2005 A standard for standards. Development of standards. Specification
BS EN 61360-1:2017 Standard data element types with associated classification scheme. Definitions. Principles and methods
BS CWA 15535-2:2006 Multi-application multi-issuer citizen scheme standardisation - Scheme architecture and implementation solution
BS ISO 12931:2013 Performance criteria for authentication solutions used to combat counterfeiting of material goods

Institute of Electrical and Electronics Engineers (IEEE)

IEEE P802.1AC/D2.1, June 2012 (Approved Draft) IEEE Approved Draft Standard for Media Access Control (MAC) Service Definition
IEEE P802.1AC/D2.1, June 2012 IEEE Draft Standard for Media Access Control (MAC) Service Definition
IEEE PC37.21/D3, August 2016 IEEE Draft Standard for Control Switchboards
IEEE P802.1AC/D2.0, March 2012 IEEE Draft Standard for Media Access Control (MAC) Service Definition
IEEE/ASTM PSI 10/D3, October 2010 IEEE/ASTM Draft Standard for Metric Practice
IEEE Std PC37.21/D18 Approved IEEE Draft Standard for Control Switchboards
IEEE PC136.24:1994 (Draft)Draft Standard for Non-Locking Type (Button) Photocontrols for Roadway Lighting DS5587
IEEE P686/D1.1, August 2023 IEEE Draft Standard for Radar Definitions
IEEE P686/D1, August 2023 IEEE Draft Standard for Radar Definitions
IEEE P686 IEEE Draft Standard for Radar Definitions
IEEE P802.1ACct/D2.0, September 2021 IEEE Draft Standard for Local and Metropolitan Area Networks -- Media Access Control (MAC) Service Definition Amendment 1: Support for IEEE Std 802.15.3
IEEE P1541/D8, August 2021 IEEE Draft Standard for Prefixes for Binary Multiples
IEEE P3201/D3.2,July 2024 IEEE Draft Standard for Blockchain Access Control
IEEE P1541/D10, October 2021 IEEE Approved Draft Standard for Prefixes for Binary Multiples
IEEE/ASTM PSI 10/D3, October 2015 IEEE/ASTM Approved Draft American National Standard for Metric Practice
IEEE/ASTM PSI 10/D2, October 2015 IEEE/ASTM Draft American National Standard for Metric Practice
IEEE P3201 IEEE Draft Standard for Blockchain Access Control
IEEE P3201/D3.1, March 2024 IEEE Draft Standard for Blockchain Access Control
IEEE P519/D6, December 2021 IEEE Draft Standard for Harmonic Control in Electric Power Systems
IEEE P519/D7, February 2022 IEEE Draft Standard for Harmonic Control in Electric Power Systems
IEEE P1541/D9, September 2021 IEEE Draft Standard for Prefixes for Binary Multiples
IEEE P519/D5.1, January 2021 IEEE Draft Standard for Harmonic Control in Electric Power Systems
IEEE PC57.148/D7, March 2020 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE P2030.8/D11, February 2018 IEEE Draft Standard for the Testing of Microgrid Controllers
IEEE P2030.8/D12, March 2018 IEEE Draft Standard for the Testing of Microgrid Controllers
IEEE P519 IEEE Draft Standard for Harmonic Control in Electric Power Systems
IEEE P1541/D7, July 2021 IEEE Draft Standard for Prefixes for Binary Multiples
IEEE P145/D2.3, January 2024 IEEE Draft Standard for Definitions of Terms for Antennas
IEEE P627/D6, May 2019 IEEE Approved Draft Standard for Qualification of Equipment Used in Nuclear Facilities
IEEE P2030.8/D10, December 2017 IEEE Draft Standard for the Testing of Microgrid Controllers
IEEE P2030.8/D13, March 2018 IEEE Draft Standard for the Testing of Microgrid Controllers
IEEE P1541/D4, May 2018 IEEE Draft Standard for Prefixes for Binary Multiples
IEEE PC57.148/D9, August 2020 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE P145 IEEE Draft Standard for Definitions of Terms for Antennas
IEEE P1881/D10, August 2015 IEEE Draft Standard Glossary of Stationary Battery Terminology
IEEE Unapproved Draft Std P1641/D3, Sept 2009 Draft Standard for Signal and Test Definition
P145/DD2, March 2013 IEEE Draft Standard for Definitions of Terms for Antennas
IEEE P1881/D11, January 2016 IEEE Approved Draft Standard Glossary of Stationary Battery Terminology
IEEE Unapproved Draft Std PC57.148/D8, Feb 2010 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE P2030.7/D10, July 2017 IEEE Draft Standard for the Specification of Microgrid Controllers
IEEE PC57.148/D9, April, 2010 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE PC57.148/D8, July 2020 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE 1178-1990(R2008) IEEE Standard for the Scheme Programming Language
IEEE PSI-10/D1, May 2010 IEEE Draft Standard for Use of the International System of Units (SI): The Modern Metric System
IEEE P2030.7/D11, August 2017 IEEE Draft Standard for the Specification of Microgrid Controllers
IEEE P420/D3, May 2023 IEEE Approved Draft Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations
IEEE P627/D5, April 2019 IEEE Draft Standard for Qualification of Equipment Used in Nuclear Facilities
IEEE P145/DD2, March 2013 IEEE Draft Standard for Definitions of Terms for Antennas
IEEE Unapproved Draft Std P627/D3, May 2008 IEEE Draft Standard for Qualification of Equipment Used in Nuclear Facilities
IEEE/ANSI 802.5-1985 ANSI/IEEE Standard ISO Draft Proposal - Token Ring Bus Access Method
IEEE PC57.148/D5, September 2019 IEEE Draft Standard for Control Cabinets for Power Transformers
IEEE P1900.5.2 IEEE Draft Standard Method for Modeling Spectrum Consumption
IEEE PSI 10/D2, October 2010 IEEE Draft Standard for Use of the International System of Units (SI): The Modern Metric System
IEEE P1641/D10, July 2022 IEEE Approved Draft Standard for Signal and Test Definition
IEEE Unapproved Draft Std P627/D3c, October 2009 Draft Standard for Qualification of Equipment Used in Nuclear Facilities
IEEE P802.1AC/D4.0, August 2016 IEEE Approved Draft Standard for Local and metropolitan area networks - Media Access Control (MAC) Service Definition
IEEE Std 802.1ACct-2021 IEEE Standard for Local and Metropolitan Area networks--Media Access Control (MAC) Service Definition-Amendment 1: Support for IEEE Std 802.15.3
IEEE P145/DD3, July 2013 IEEE Draft Standard Definitions of Terms for Antennas
IEEE P627/D4, December 2018 IEEE Draft Standard for Qualification of Equipment Used in Nuclear Facilities
IEC 62659 Ed.1, October 2011 IEEE/IEC Draft Standard for Large Scale Manufacturing of Nanoelectronics
IEEE P1900.5.2/D2.0, May 2024 IEEE Draft Standard Method for Modeling Spectrum Consumption
IEEE P1641/D9, August 2021 IEEE Draft Standard for Signal and Test Definition
IEEE P1900.5.2/D1.01, January 2016 IEEE Draft Standard Method for Modeling Spectrum Consumption
IEEE P1888.1/D5.0, June 2013 IEEE Approved Draft Standard for an Ubiquitous Green Community Control Network: Control and Management
IEEE P1900.5.2/D1.06, February 2017 IEEE Draft Standard Method for Modeling Spectrum Consumption
IEEE P1900.5.2/D1.0, November 2021 IEEE Draft Standard Method for Modeling Spectrum Consumption
IEEE Std P1484.20.1/D4 Unapproved IEEE Draft Standard for Learning Technology Standard for Reusable Competency Definitions
IEEE Unapproved Draft Std P1641/D4, Feb 2010 IEEE Draft Standard for Signal and Test Definition
IEEE P802.1AC-REV/D3.0, September 2015 IEEE Draft Standard for Local and metropolitan area networks - Media Access Control (MAC) Service Definition
IEEE P802.1AC/D3.1 April 2016 IEEE Draft Standard for Local and metropolitan area networks - Media Access Control (MAC) Service Definition
IEEE P338/D6, February 2011 IEEE Draft Standard for Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
IEEE P2700/D2, September 2016 IEEE Approved Draft Standard for Sensor Performance Parameter Definitions
IEEE P344/D12, June 2013 IEEE Approved Draft Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations
IEEE P802.1AC/D3.2, June 2016 IEEE Draft Standard for Local and metropolitan area networks - Media Access Control (MAC) Service Definition
IEEE P2700/D3, April 2017 IEEE Approved Draft Standard for Sensor Performance Parameter Definitions
IEEE PC37.21a/D7, October 2019 IEEE Approved Draft Standard for Control Switchboards Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
IEEE Std P1641.1/D1 Unapproved IEEE Draft Guide for the Use of IEEE Std 1641, Standard for Signal and Test Definition
IEEE P1888.3/D6.0, July 2013 IEEE Approved Draft Standard for Ubiquitous Green Community Control Network: Security
IEEE Std P270/D10d, Sep 2005 IEEE Draft Standard Definitions for Selected Quantities, Units, and Related Terms, With Special Attention to the International System (SI) of Units
P802.1ACct/D2.0, September 2021 IEEE Draft Standard for Local and Metropolitan Area Networks -- Media Access Control (MAC) Service Definition Amendment 1: Support for IEEE Std 802.15.3
IEEE P2888.5 IEEE Draft Standard for Virtual Training System Evaluation Methods
IEEE P1484.20.3 IEEE Approved Draft Standard Data Model for Sharable Competency Definitions
IEEE P421.1/D1, February 2021 IEEE Approved Draft Standard Definitions for Excitation Systems for Synchronous Machines
IEC/IEEE P62659/D3, May 2015 IEC/IEEE Approved Draft International Standard - Nanomanufacturing -- Large scale manufacturing for nanoelectronics
IEEE PC37.11/D2.1, October 2022 IEEE Approved Draft Standard for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
IEEE PC37.21a/D4, August 2019 IEEE Draft Standard for Control Switchboards Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
IEEE P1696 D10 June 2013 IEEE Approved Draft Standard for Terminology and Test Methods for Circuit Probes
IEEE Unapproved Draft Std P686/D2, Jan 2008 IEEE Draft Standard Radar Definitions (Revision of IEEE 686-1997)
IEEE UAS Standards Tracking and Standards Developm IEEE UAS Standards Tracking and Standards Development Related Research Needs
IEEE P420/D2, February 2013 IEEE Approved Draft Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations
IEEE PC37.11 IEEE Approved Draft Standard for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
IEEE/IEC P62659_D2 IEEE/IEC Draft Standard for Large Scale Manufacturing of Nanoelectronics
IEEE P2145/D2, May 2023 IEEE Draft Standard for Framework and Definitions for Blockchain Governance
IEEE P1549-2015/Cor1/D3, September 2017 IEEE Approval Draft Standard for Microwave Filter Definitions--Corrigendum 1
IEEE P2145 IEEE Draft Standard for Framework and Definitions for Blockchain Governance
IEEE P2145/D1, December 2022 IEEE Draft Standard for Framework and Definitions for Blockchain Governance
IEEE P1484.20.3/D2, February 2022 IEEE Approved Draft Standard Data Model for Sharable Competency Definitions
IEEE PC37.11/D6.6, April 2013 IEEE Draft Standard Requirements for Electrical Control for AC High-Voltage (>1000V) Circuit Breakers
IEC 62659:2013 IEEE/IEC Draft Standard for Large Scale Manufacturing of Nanoelectronics
IEEE Unapproved Draft Std P1044/D00003, Feb 2009 Draft Standard for IEEE Standard Classification for Software Anomalies
IEEE P802.3.1/D3.1, February, 2011 IEEE Approved Draft Standard for Management Information Base (MIB) Definitions for Ethernet
IEEE PC62.82.1/D5, July 2010 IEEE Draft Standard for Insulation Coordination - Definitions, Principles, and Rules
IEEE P802.3.2/D3.1, November 2018 IEEE Draft Standard for Ethernet YANG Data Model Definitions
IEEE P2672/D2, February 2022 IEEE Approved Draft Guide for General Requirements of Mass Customization
IEEE P2772/D7.1, November 2020 IEEE Approved Draft Standard for Test Method for Energy Loss of Overhead Conductors
IEEE P1687/D1.71, March 2014 IEEE Approved Draft Standard for Access and Control of Instrumentation Embedded within a Semiconductor Device
IEEE PC37.21a/D3, June 2019 IEEE Draft Standard for Control Switchboards Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
IEEE P1024:1998 (Draft)Draft Standard for Specifying Distribution Composite Insulators (Suspension and Dead-End Type) DS5632
IEEE Std PC95.1/D2.3 Unapproved Revised Pc95.1b (Draft IEEE Standard for Safety Levels With Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 Ghz Amendment 1: Specific Absorption Rate (SAR) Limits for the Pinna) (Amendment 1 to IEEE Std C95.1-1
IEEE Std PC95.1/D2.4 Unapproved Revised Pc95.1b (Draft IEEE Standard for Safety Levels With Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 Ghz Amendment 1: Specific Absorption Rate (SAR) Limits for the Pinna) (Amendment 1 to IEEE Std C95.1-1
IEEE P2405/D9.8, August 2022 IEEE Approved Draft Standard for the Design of Chargers Used in Stationary Battery Applications
IEEE P802.3cc/DP802.3.2/D3.0, September 2018 IEEE Draft Standard for Ethernet YANG Data Model Definitions
IEEE P211/D25, July 2018 IEEE Draft Standard Definitions of Terms for Radio Wave Propagation
IEEE P2672 IEEE Approved Draft Guide for General Requirements of Mass Customization
IEEE PC37.112/D3, July 2018 IEEE Approved Draft Standard Inverse-Time Characteristic Equations for Overcurrent Relays
IEEE P2405/D9.5 June 2021 IEEE Draft Standard for the Design of Chargers Used in Stationary Battery Applications
IEEE P802.3.2/D3.0, September 2018 IEEE Draft Standard for Ethernet YANG Data Model Definitions
IEEE P211/D24, June 2018 IEEE Draft Standard Definitions of Terms for Radio Wave Propagation
IEEE Std 802.3.1/D2.1, February 2013 IEEE Draft Standard for Management Information Base (MIB) Definitions for Ethernet
IEEE Std P1800.2/D7, November 2016 IEEE Approved Draft Standard for Universal Verification Methodology Language Reference Manual
IEEE Unapproved Draft Std P1901/D2.00, Jan 2010 IEEE Draft Standard for Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications
IEEE PC37.11/D1.4, February 2021 IEEE Draft Standard Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
IEEE P2405/D9.6, June 2022 IEEE Draft Standard for the Design of Chargers Used in Stationary Battery Applications
IEEE P802.3.2/D3.2, January 2019 IEEE Draft Standard for Ethernet YANG Data Model Definitions
IEEE Std P1672/D1.5 IEEE Draft Standard for Ultrawideband Radar Definitions - Corrigendum 1
IEEE Unapproved Draft Std PC62.82.1/D2, Aug 2008 IEEE Draft Standard for Insulation Coordinatio--Definitions, Principles, and Rules
IEEE P338/D8, July 2022 IEEE Approved Draft Standard for Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
IEEE P420/D1, July 2022 IEEE Draft Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations
IEC/IEEE P61869-21/CDV, 2024 IEEE Draft Standard Uncertainty Evaluation in the Calibration of Instrument Transformers
IEEE P692/D4d, 26 June 2013 IEEE Draft Standard for Criteria for Security Systems for Nuclear Power Generating Stations
IEEE P3101 IEEE Draft Standard for Fiber Optic Distributed Acoustic Sensing (DAS) Interrogator Standard – Terminology and Definitions

US-FCR

FCR AF ETL 94-01-1994 STANDARD AIRFIELD PAVEMENT MARKING SCHEMES
FCR 21 CFR PART 861-2013 PROCEDURES FOR PERFORMANCE STANDARDS DEVELOPMENT
FCR 21 CFR PART 861-2014 PROCEDURES FOR PERFORMANCE STANDARDS DEVELOPMENT
FCR 21 CFR PART 861-2015 PROCEDURES FOR PERFORMANCE STANDARDS DEVELOPMENT

American National Standards Institute （ANSI)

ANSI/IEEE 1228:1994 Standard for Software Safety Plans
ANSI/IEEE 828:2005 Standard for Software Configuration Management Plans
ANSI/EIA 4899:2002 Standard for Preparing an Electronic Components Management Plan
ANSI/ASTM E1546:2021 Standard Guide for Development of Fire-Hazard-Assessment Standards
ANSI/ASTM E1776:2013 Guide for Development of Fire-Risk-Assessment Standards
ANSI/ASTM E1546a:2009 Guide for Development of Fire-Hazard-Assessment Standards
ANSI/ASA S2.21-1998 Standard Method for Preparation of a Standard Material for Dynamic Mechanical Measurements
ANSI/UL 1565-2013 Standard for Safety for Positioning Devices (Proposal dated 9-28-12)

American Society for Testing and Materials (ASTM)

ASTM D5498-09 Standard Guide for Developing a Training Program for Personnel Performing Coating Work Inspection for Nuclear Facilities
ASTM E81-96(2007) Standard Test Method for Preparing Quantitative Pole Figures
ASTM E81-96(2011) Standard Test Method for Preparing Quantitative Pole Figures
ASTM A370-68 Standard Methods And Definitions For Mechanical Testing Of Steel Products
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E1465-06 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
ASTM D6410-99(2020) Standard Test Method for Determining Acidity of Vegetable Tanning Liquors
ASTM E177-06a Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E1779-96a(2004) Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
ASTM C1108-99(2006) Standard Test Method for Plutonium by Controlled-Potential Coulometry
ASTM E1202-87(2003) Standard Guide for Development of Micronucleus Assay Standards
ASTM E1589-94 Standard Test Method for Evaluation of First Aid Antiseptic Drug Products
ASTM E1202-87(2008) Standard Guide for Development of Micronucleus Assay Standards
ASTM E1589-05(2010) Standard Test Method for Evaluation of First Aid Antiseptic Drug Products
ASTM E177-90a(2002) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E1779-96a Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
ASTM E1202-87(1998) Standard Guide for Development of Micronucleus Assay Standards
ASTM A370-06 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-07a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-03 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-22 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-02e1 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-07b Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E2620-08 Standard Classification for Program and Project Estimate Summaries
ASTM A370-12 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-09ae1 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM D4483-18 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM A370-03a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-07 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-05 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E1776-22 Standard Guide for Development of Fire-Risk-Assessment Standards
ASTM D3070-00(2005) Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM A370-10 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM D3070-00 Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM A370-12a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM F757-94e1 Standard Test Method for Determining Energy Consumption of Copier and Copier-Duplicating Equipment
ASTM A370-11a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM C1108-12 Standard Test Method for Plutonium by Controlled-Potential Coulometry
ASTM A370-13 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-11 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM D6259-15 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
ASTM D4483-20 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM E1465-08a Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
ASTM E1546-00e1 Standard Guide for Development of Fire-Hazard-Assessment Standards
ASTM D3070-00(2010) Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM F1829-17 Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear
ASTM C1108-23 Standard Test Method for Plutonium by Controlled-Potential Coulometry
ASTM G158-98(2010) Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM C1898-20 Standard Test Methods for Determining the Chemical Resistance of Concrete Products to Acid Attack
ASTM D5851-95(2015) Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM D7480-08 Standard Guide for Evaluating the Attributes of a Forest Management Plan
ASTM D5851-95(2011) Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM A370-15 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM D5851-95(2006) Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM G158-98 Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM E1776-13 Standard Guide for Development of Fire-Risk-Assessment Standards
ASTM E1584-17 Standard Test Method for Assay of Nitric Acid
ASTM A370-17 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E2472-06 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM A370-16 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM D4270-95(2001) Standard Guide for Using Existing Practices in Developing and Writing Test Methods
ASTM D6312-98(2012)e1 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs
ASTM E502-07 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E1584-00(2005) Standard Test Method for Assay of Nitric Acid
ASTM F2119-07 Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants
ASTM E1882-05 Standard Test Method for Evaluation of Antimicrobial Formulations by the Agar Patch Technique
ASTM D5425-00 Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products
ASTM D5472/D5472M-14 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM D5773-02 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5472-93(2005) Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM E3253-21 Standard Practice for Establishing an Examination Scheme for Intact Explosives
ASTM C1825-18 Standard Guide for Developing Specifications for Masonry Units
ASTM C1187-15 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment
ASTM E1337-19 Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire
ASTM D5773-04 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5773-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D5425-14 Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products
ASTM D5773-95 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM B887-03(2008)e1 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
ASTM D5764-97a(2002) Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products

ETSI - European Telecommunications Standards Institute

EG 201 014-1997 Methods for Testing and Specification (MTS); ETSI Standards-Making; Technical Quality Criteria for Telecommunications Standards (V1.1.1)

RU-GOST R

GOST 15124-1977 Machine-made carpet goods. Norms of colour fastness and methods for determination
GOST R 1.6-2005 Standardization in the Russian Federation. Draft standards. Organization of realization of expertise
GOST 25794.1-1983 Reagents. Methods of preparation of standard volumetric solutions for acid-base titration
GOST R 1.6-2013 Standardization in the Russian Federation. Draft standards. Rules of organization and realization of expertise
GOST 25794.3-1983 Reagents. Methods of preparation of standard volumetric solutions for precipitation titration, non-aqueous titration and other titrimetric methods
GOST 25794.2-1983 Reagents. Methods for preparation of standard volumetric solutions for redox titration
GOST 27872-1988 Metrology. Reference materials. Methods of production and calibration of reference materials of rocks and mineral raw materials

CN-STDBOOK

图书 3-8924 Standard formulation

VN-TCVN

TCVN 1-1-2015 Development of standards .Part 1: Procedures for developing national standards
TCVN 1-1-2008 Development of standards.Part1:Procedures for developing national standards by Technical committees
TCVN II-2012 Set of national standards for medicines

Korean Agency for Technology and Standards (KATS)

KS X ISO 6536_2002-2019 Bank operations－Standard scheme for drawing lists
KS M 1028-2016 Carbonate pH standard solutions
KS M 1029-2016 Phosphate pH standard solutions
KS X ISO 6536_2002-2006(2011) Bank operations－Standard scheme for drawing lists
KS M 1027-2016 Tetraborate pH standard solutions
KS X ISO 6536_2002:2006 Bank operations－Standard scheme for drawing lists
KS X ISO 6536:2002 Bank operations-Standard scheme for drawing lists
KS M 1025-2016 Phthalate pH standard solutions
KS M 1003-2008(2018) Iron standard solution
KS C IEC 61360-1-2011(2021) Standard data elements types with associated classification schemenfor electric items－Part 1：Definitions－Principles and methods

Association Francaise de Normalisation

NF V37-530/A1*NF EN ISO 12863/A1:2016 Standard test method for assessing the ignition propensity of cigarettes - Amendment 1
CWA 15535-2:2006 Multi-application multi-issuer citizen card scheme standardisation - Part 2 : scheme architecture and implementation solution
XP CEN/TS 15674:2008 Air quality - Measurements of emissions from stationary sources - Guidelines for the development of standard methods
NF C03-501-1*NF EN 61360-1:2017 Standard data element types with associated classification scheme - Part 1 : definitions - Principles and methods
XP X43-378*XP CEN/TS 15674:2008 Air Quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
NF X31-605:2011 Soil quality - Guidance on the establishment and maintenance of monitoring programmes.
NF ISO 20778:2019 Cigarettes - Routine Analytical Smoking Machine for Cigarettes - Standardized Definitions and Conditions with Heavy Smoking Regime
NF L09-750:1973 Standardized parts. Designation system with unlimited number of characters (rech.).

BR-ABNT

ABNT NBR 11589-1989 Chemical Analysis - Preparation, Standardization and Storage of Solutions for Analysis - Process

International Organization for Standardization (ISO)

ISO Guide 4:1975 Preparation of standard methods of measuring performance of consumer goods (SMMP)
ISO 9272:1986 Rubber and rubber products; Determination of precision for test method standards
ISO/IEC Guide 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment
ISO/TR 9272:2005 Rubber and rubber products - Determination of precision for test method standards
ISO/TR 9272:1986 Rubber and rubber products; Determination of precision for test method standards

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE P627/D6-2019 Draft Standard for Qualification of Equipment Used in Nuclear Facilities
IEEE P627/D5-2019 Draft Standard for Qualification of Equipment Used in Nuclear Facilities
IEEE P627/D4-2018 Draft Standard for Qualification of Equipment Used in Nuclear Facilities
IEEE PC37.21A/D3-2019 Draft Standard for Control Switchboards Amendment 1 Control and Secondary Circuits and Devices@ and All Wiring
IEEE PC37.112/D2-2017 Draft Standard for Inverse-Time Characteristics Equations for Overcurrent Relays
IEEE PC37.112/D3-2018 Draft Standard for Inverse-Time Characteristics Equations for Overcurrent Relays
IEEE 170-1964 STANDARD DEFINITIONS OF TERMS FOR MODULATION SYSTEMS

European Telecommunications Standards Institute (ETSI)

ETSI EG 201 872-2001 Methods for Testing and Specification (MTS); Methodological Approach to the Use of Object-Orientation in the Standards Making Process (V1.2.1)
ETSI EG 201 017-2000 Corporate Telecommunication Networks (CN); Standardization Plan (V1.4.1)

GSO

GSO 1045:2000 METHOD OF PREPARATION OF REAGENT SOLUTIONS OF QUANTITATIVE ANALYSIS
GSO OIML R56:2008 Standard solutions reproducing the conductivity of electrolytes
OS GSO ISO/TR 9272:2010 Rubber and rubber products -- Determination of precision for test method standards

TH-TISI

TIS 63-1980 Standard for filing cabinets
TIS 518-1984 Standard for fire resistant filing cabinet

HU-MSZT

MSZ 14410-1967 Controlled tool certification standards
MSZ 5933/1.lap-1963 Ordinary customized fireproof square brick shapes and sizes. technical standard
MSZ KGST 895-1978 Plastic products defined by standards

Consultative Committee for Space Data Systems (CCSDS)

CCSDS 651.0-M-1-2004 Producer-archive interface methodology abstract standard

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

SERIE D SUPP 1 FRENCH-2004 Cost and tariff study method
ITU-T A.3-1996 Elaboration and Presentation of Texts and Development of Terminology and Other Means of Expression for Recommendations of the ITU Telecommunication Standardization Sector

Danish Standards Foundation

DS/CEN/TR 14547:2006 Sampling schemes for third party conformity assessment of fineness in precious metal articles
DS/CEN/TS 15674:2008 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
DS/CEN Guide 15:2012 Guidance document for the development of service standards
DS/EN 61360-2:2003 Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema
DS/EN 61360-2:2013 Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema
DS/EN 61360-2/A1:2004 Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema

AENOR

UNE-CEN/TS 15674:2009 EX Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods

IX-EU/EC

M 335-2003 STANDARDIZATION MANDATE ASSIGNED TO THE CEN CONCERNING THE MODERNISATION OF THE METHODS OF ANALYSIS OF FERTILIZERS
M 326-2002 STANDARDIZATION MANDATE TO CEN FOR THE DEVELOPMENT OF STANDARDISED METHODS FOR THE CHARACTERISATION OF WASTE

ES-UNE

UNE-EN 61360-1:2017 Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods (Endorsed by Asociación Española de Normalización in January of 2018.)
UNE-CEN GUIA 15:2012 IN Guidance document for the development of service standards
UNE-CEN/TR 17911:2023 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content (Endorsed by Asociación Española de Normalización in March of 2023.)

VDI - Verein Deutscher Ingenieure

VDI 2222 Blatt 1-1996 Konstruktionsmethodik - Methodisches Entwickeln von Loesungsprinzipien

German Institute for Standardization

DIN EN 61360-1:2018-07 Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods (IEC 61360-1:2017); German version EN 61360-1:2017 / Note: DIN EN 61360-1 (2004-12) remains valid alongside this standard until 2020-12-01.
DIN CEN/TR 17911:2023-06 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content; German version CEN/TR 17911:2023

KE-KEBS

KS 08-269-1982 PUBLIC REVIEW DRAFT KENYA STANDARD SPECIFICATION FOR METHOD FOR DETERMINATION OF CREASE RECOVERY OF FABRICS

ZA-SANS

SANS 9272:2003 Rubber and rubber products - Determination of precision for test method standards
SANS 1877:2004 A standard land-cover classification scheme for remote-sensing applications in South Africa
SANS 1-2:2007 Standards for standards Part 2: Requirements for the recognition of Standard Development Organizations (SDOs) in South Africa

Society of Automotive Engineers (SAE)

SAE STD0016-2010 Standard for Preparing a DMSMS Management Plan
SAE AGS1-1-1967 AGS1 Procedure for the Establishment of Standards for Proprietary Items

NATO - North Atlantic Treaty Organization

STANAG 4133-1992 Method of Specifying Electrical Power Supplies: Standard Types of Electrical Power (ED 2 AMD 1 Amendment 1@ 11/27/95; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@
STANAG 2346-1975 Standard Method of Writing Prescriptions for Spectacles (ED 1 AMD 5 Amendment 5: 1986)

CU-NC

INC 73-1985 Development and approval of standard safety requirements

US-CFR-file

CFR 34-75.209-2013 Education. Part75:Direct grant programs. Section75.209:Selection criteria based on statutory or regulatory provisions.

European Committee for Standardization (CEN)

CEN/TR 14547:2005 Sampling schemes for third party conformity assessment of fineness in precious metal articles

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE OR-16-C051-2016 A Visual Analytics Based Methodology for Multi-Criteria Evaluation of Building Design Alternatives
ASHRAE 4288-1999 Development of Energy-Efficiency Standards for Indian Refrigerators

IX-FAO

CAC/GL 21-1997(Ch) Guidelines for the development and application of food microbiological standards

CZ-CSN

CSN 40 4401-1984 Standard solutions of radionuclides and standard solid radioactive sources. Contents of certificates

American Welding Society (AWS)

WRC 186:1973 Part 1: Design Options for Selection of Fracture Control Procedures in the Modernization of Codes, Rules and Standards