sample temperature

sample temperature, Total:75 items.

The international standard classification for "sample temperature" includes: Rubber , Protection against dangerous goods , Footwear , Powder metallurgy , Thermodynamics and temperature measurements .

The Chinese standard classification for "sample temperature" includes: Rubber products in general , Marking, packaging, transport and storage in general , Footgear , Metal physical property test method , Temperature and pressure instrument .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22050-2008 Footwear - Sampling location preparation and duration of conditioning of samples and test pieces
GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures
GB/T 38298-2019 Test method of auto-ignition temperature for solid chemicals
GB/T 5455-2014(英文版) "Textiles—Burning behaviour—Determination of damaged length,afterglow time and afterflame time of vertically oriented specimens"
GB/T 2941-1991 Standard temperature, humidity and time for environmental regulation and testing of rubber samples

未注明发布机构

DVS 2201-1 BBL05:2006-10 Service life temperature time limits due to thermal ageing
AMPP Paper 18009-2022 Impact of Preservation Method, Storage Temperature and Processing Time on Microbiological Community Shift in Solid Samples Collected from Crude Oil Transmission Pipelines

Professional Standard - Agriculture

GB/T 45358-2025 Temperature measurement method in perishable foods cold chain

Professional Standard - Electron

SJ/Z 3206.9-1989 Methods for inspection of standard samples or sample uniformity

American Water Works Association (AWWA)

AWWA WQTC56964 Assessment of the Effects of Holding Time and Temperature on E. coli Concentrations in Surface Water Samples
AWWA WQTC64117 The Optimal Holding Time and Temperature for Legionella pneumophila Water Samples

PL-PKN

PN C04224-1993 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces

South African Bureau of Standard

SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 3817-1994 Time-Temperature-Humidity Relations for the Storage of Fresh Commodities

Danish Standards Foundation

DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
DANSK DS/EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat
DS/EN ISO 2578:1999 Plastics - Determination of time-temperature limits after prolonged exposure to heat

International Organization for Standardization (ISO)

ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces
ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
ISO/CD 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO 4075:2025 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO 17709:2004 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces

American Society for Testing and Materials (ASTM)

ASTM E423-71(1996)e1 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM E423-71(2002) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM E423-71(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM E423-71(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM D5540-13 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
ASTM E918-83(2005) Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
ASTM E955-88(2004) Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
ASTM F1416-96 Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96(2003) Standard Guide for Selection of Time-Temperature Indicators
ASTM E955-88(2009)e1 Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples

Association Francaise de Normalisation

NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
NF T51-000:1978 Plastics. Preferred scales of temperatures and test durations.

British Standards Institution (BSI)

BS 1041-7:1964 Code for temperature measurement-Temperature/time indicators
BS EN 1252-1:1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below -80 C
BS 7908:1999 Packaging - Temperature and time-temperature indicators - Performance specification and reference testing
BS ISO 24033:2025 Polyethylene of raised temperature resistance (PE-RT) pipes. Effect of time and temperature on the expected strength
BS ISO 4075:2025 Polysulfone (PSU). Effect of time and temperature on expected strength

Gosstandart of Russia

GOST 16783-2017 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
GOST 16783-1971 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
GOST 21727-1976 Water. Viscosity of water at 20 °C
GOST 25983-1983 Chrysotile asbestos. Acceptance rules, sampling and preparation of samples

CL-INN

INDITECNOR 20-102 Petroleum products: liquefied gas. Temperature test at 95% boiling

Swedish Institute for Standards

SS-EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007)
SS-ISO 471:1995 Rubber - Temperaures, humidities and times for conditioning and testing

CZ-CSN

CSN ON 25 8012-1964 Thermometer and thermometer time constants
CSN 64 0768-1982 Determination of time - emperature limits

Ente Nazionale Italiano di Unificazione

UNI 10701:1999 Colorimetry - Secondary reference sample - Interpretation and application of colorimetric data on request of a colour as for sample.
EC 1-2009 UNI EN 13400:2002 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces

PT-IPQ

NP 1294-1976 condiment. Mustard particles. Measurement of weight loss at 103 degrees Celsius

Korean Agency for Technology and Standards (KATS)

KS M ISO 17709-2005(2020) Footwear－Sampling location, preparation and duration of conditioning of samples and test pieces
KS M ISO 17709-2024 Footwear — Sampling location, preparation and duration of conditioning of samples and test pieces
KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 471:2011 Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471-2011 Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471-2002(2007) Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 17709:2005 Footwear－Sampling location, preparation and duration of conditioning of samples and test pieces

ESDU - Engineering Sciences Data Unit

ESDU 89023-1989 Temperatures in plates subjected to a recovery temperature varying linearly with time.

Japanese Industrial Standards Committee (JISC)

JIS K 7226:1998 Plastics -- Determination of time-temperature limits after prolonged exposure to heat

Association of German Mechanical Engineers

VDI VDE 3522-1987 Time response of contact thermometers
VDI/VDE 3522-1987 Time response of contact thermometers
VDI/VDE 3522-1981 Zeitverhalten von Beruehrungsthermometern

German Institute for Standardization

DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN EN 13400:2002-04 Footwear - Sampling location, preparation und duration of conditioning of samples and test pieces; English version of DIN EN 13400
DIN 53446:1962 Testing plastics. Determining temperature-time limits

GCC Standardization Organization

GSO ISO 2578:2015 Plastics -- Determination of time-temperature limits after prolonged exposure to heat
GSO ISO 24033:2013 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength

CH-SNV

SNV 24700-1937 Water chemistry. Sampling and temperature measurement

UY-UNIT

NORMA 36-P-1947 Interim standards for extraction of mixture samples

Malaysia Standards

MS 1523-2001 Rubber-Temperatures,Humidities and times for conditioning and testing

Spanish Association for Standardization (UNE)

UNE 53509:1995 RUBBER. TIMES, TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING

IT-UNI

UNI 5306-1963 Glass products for technology and hygiene. Anti-bulge strength test of wire glass at temperature ≥100℃

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TR-585-2006 Time, Temperature and Humidity Stress of Final Board Finish Solderability