Density meter parameters

Density meter parameters, Total:217 items.

The international standard classification for "Density meter parameters" includes: Radiation measurements , Nuclear energy engineering , Measurement of electrical and magnetic quantities , Metrology and measurement in general , Measurement of fluid flow , Petroleum products in general , Lathes , Optical measuring instruments , Chemical laboratories. Laboratory equipment , Geology. Meteorology. Hydrology , Mining and quarrying , Exploratory and extraction equipment , Equipment for petroleum and natural gas industries , Diagnostic equipment , Other textile machinery , Medical Sciences and health care facilities in general .

The Chinese standard classification for "Density meter parameters" includes: Ionizating Radiation Measurement , Digital display instrument , Display recording instrument , Petroleum products in general , Lathe , Optical metrological instrument , Flow capacity and material level instrument , Optical instrument in general , Electrochemical, thermochemistry and optical profile type analyzer , Operating equipment, instrument and meter , Oceanographic instrumentation , Petroleum exploration logging equipment and instrument , Petroleum drilling & production equipment and instrument , Petroleum exploration, development, gathering and transportation equipment in general , Medical ultrasound, laser, high-frequency instrument and equipment , Textile testing instrument , Medical science .

National Metrological Verification Regulations of the People's Republic of China

JJG(交通) 068-2006 Verification Regulation of Nuclear Density and Moisture Gage
JJG 141-2017 Asphalt pavement non-nuclear density meter
JJG 1163-2019 Multifunction Patient Monitoring Instruments
JJG(民航) 035-1996 Verification Regulation of ИВП Ouput Parameter Test Set
JJG(机械) 75-1992 Verification Regulations for Current Density Tester
JJG 1050-2009 X、gamma-ray Densitometry for Bone Mineral Density
JJG(地质) 1021-1994 Verification Regulations for Relative Density Meter
JJG(铁道) 128-1991 Verification Regulations for Nucleon Humidity and Density Tester (Trial)
JJG(电子) 31010-2007 Verification Regulations for Precision Analyzer of Semiconductor Parameters
JJG(铁道) 150-2009 Measuring instrument for contact wire geometric parameter
JJG(建材) 137-1999 sink-float comparative density meter

National Metrological Technical Specifications of the People's Republic of China

JJF 1470-2014 Calibration Specification for Multiparameter Physiological Simulators
JJF 1649-2017 Calibration Specification for Ultrasound Bone Sonometers
JJF 1491-2014 Calibration Specification for Digital AC Electrical Parameters Meter
JJF(机械) 026-2008 Calibration specification for current density tester
JJF 2143-2024 Calibration Specification for Temperature Parameters of Microwave Digestion Instruments
JJF 2009-2022 Calibration Specification for Semiconductor Parameters Precision Analyzers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13970-2008 Basic parameter terms of digital instruments
GB/T 3720-1988 Optical length measuring instruments--Basic parameters
GB/T 1314-1991 Basic parameters for flow measuring instruments
GB/T 41485-2022 Nuclear instrumentation—Geophysical borehole instrumentation to determine rock density
GB/T 13970-1992 Basic parameter series of digital instruments
GB/T 29617-2013 Determination of density, relative density,and API gravity of liquids by digital density meter
GB/T13970-2008 Basic parameter terms of digital instruments
GB/T 13970-2008 Basic parameter terms of digital instruments
SN/T 2383-2017 Liquid chemical products—Determination of density and relative density—Digital densty meter method

Professional Standard - Machinery

JB/T 4136.1-1999 Meter Lathe Parameters
JB/T 9346-1999 Basic parameters for spectrophotometer
JB/T 13046-2017 Parameters measuring instrument for oil pipe screw thread
JB/T 10574-2013 Optical Length Measuring Instruments - Basic Parameters
JB/T 6266-1992 Optical Comparator for Angle Measurement - Basic Parameter
JB/T 10574-2006 Optical length measuring instruments -- Basic parameters
JB/T 10564-2006 Basic parameters for flow measuring instruments
JB/T 7440-1994 Die-casting technique parameter tester
JB/T 13738-2019 Portable multiparameter analyzer for water quality

Group Standards of the People's Republic of China

T/GDC 172-2022 Lifewave health parameter detector
T/QGCML 935-2023 Portable High Sensitivity Multi-parameter Gas Detector
T/SXICS 006-2024 Calibration specification for multiparameter analyzers of water quality
T/CRHA 155-2025 Alarm parameter management specification for adult multi-parameter monitors
T/CIMA 0044-2023 Cyanobacteria density online monitor
T/ZJDJ 005-2022 Digital display electric parameter measuring instrument
T/ZPP 045-2023 Multi-parameter online water quality monitor
T/GXAS 010-2018 Determination of Density and Relative Density of Gum Turpentine by Densitometer Method
T/SXBX 001-2023 Production logging four-parameter combination logging tool
T/SXICS 002-2023 calibration specification for multiparameter water quality testers

Professional Standard - Traffic

JT/T 1171-2017 Non-nuclear density gauge for asphalt pavement
JT/T 658-2006 Nuclear density and moisture gauge

Professional Standard - Ocean

HY/T 126-2009 Multiparameter water quality monitor

Professional Standard - Petroleum

SY/T 6971-2013 Multi-parameter Drilling Instrumentation Testing Equipment
SY/T 6582.3-2003 The Calibration for petroleum nuclear logging tool - Part 3: The calibration for compensated density/litho-density tool
SY/T 6739-2008 Technical specifications of drilling parameter monitor
SY/T 5097-2006 Technical specifications of multi-parameter monitoring instrument of drilling/servicing rig
SY 5097-2006 Technical conditions of multi-parameter instrument for drilling (workover) well
SY/T 5097-1991 Drilling multi-parameter instrument
SY 6146-1995 Drilling parameter instrumentation driller operation combination
SY/T 6758-2009 Calibration method of lithological density log tool
SY/T 6182-1996 Production Profile Logging Tool Calibration Procedure Fluid Density Logging Tool
SY/T 6579-2003 The calibration method for density tool
SY/T 5097-1996 Technical conditions of multi-parameter instrument for drilling (workover) well

Professional Standard - Medicine

YY/T 0774-2019 Ultrasound bone sonometers
YY 0774-2010 Ultrasound bone sonometers

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5382.2-2005 Test methods of physical parameter for pyrotechnic. Part 2: Determination of density. Pyknometer method

Military Standard of the People's Republic of China-General Armament Department

GJB 2740-1996 Pulse laser rangefinder parameter series
GJB 7296-2011 Parameters and algorithm of low density parity check code for military application
GJB 8860-2016 Calibration procedures for multi-parameter monitors
GJB/J 5230-2003 Calibration procedures for smoke density tester
GJB 8683.2-2015 Test methods for physical parameters of pyrotechnics Part 2: Density determination density bottle method

Professional Standard - Textile

FZ/T 98004-2008 Textile fiber linear density meter vibrating method

Professional Standard - Hygiene

WS/T 659-2019 Safety management for multi-parameter patient monitor

Professional Standard - Railway

TB/T 3227-2010 Measuring instruments for contact wire geometry

Professional Standard - Commodity Inspection

SN/T 2383-2009 Liquid chemical products—Determination of density and relative density—Digital density meter method

工业和信息化部

JBT13738-2019 Portable multi-parameter water quality analyzer

Professional Standard - Military and Civilian Products

WJ 2098-1992 Pulse laser range finder parameter series

Professional Standard - Nuclear Industry

EJ/T 904-1994 Single Photon Bone Mineral Densitometer

Professional Standard - Construction Industry

JG/T 329-2011 Concrete thermal parameters tester

Professional Standard - Energy

NB/T 10169-2019 Operational parameter tester for mine hoisters
NB/T 51036-2015 Portable multi parameter testing instrument for coal mine water

American Society for Testing and Materials (ASTM)

ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-15 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM RR-D02-1257 1990 D5002- Test for Determination of Density in Crude Oils by Digital Analyzer
ASTM D3818-92 Test Method for Linear Density and Maturity Index of Cotton Fibers (IIC-Shirley Fineness Maturity Tester Method
ASTM F1811-97 Standard Practice for Estimating the Power Spectral Density Function and Related Finish Parameters from Surface Profile Data
ASTM F1811-97(2002) Standard Practice for Estimating the Power Spectral Density Function and Related Finish Parameters from Surface Profile Data
ASTM D4052-96(2002)e1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D4052-18 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D4052-18a Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D4052-96 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D4052-16 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM RR-D02-1387 1996 D4052-Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

RO-ASRO

STAS 4384-1968 An instrument for measuring density. Breast density meter

AT-ON

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions

International Organization for Standardization (ISO)

ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 1878:1974 Title missing - Legacy paper document
ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO/TS 20758:2019 Traditional Chinese medicine — Abdominal physiological parameter detectors
ISO 7971-2:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

Korean Agency for Technology and Standards (KATS)

KS I ISO 15970:2010 Natural gas-Measurement of properties-Volumetric properties: density, pressure, temperature and compression factor
KS A 3010-1986 Glossary of terms used in instrumentation Accuracy and precision
KS B ISO 14577-3-2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS H ISO 279-2014(2019) Essential oils — Determination of relative density at 20 degrees C — Reference method
KS H ISO 279-2019 Essential oils — Determination of relative density at 20 degrees C — Reference method
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS C IEC 60692-2019 Nuclear instrumentation－Density gauges utilizing ionizing radiation－Definitions and test methods
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS C IEC 60692-2024 Nuclear instrumentation — Density gauges utilizing ionizing radiation — Definitions and test methods
KS H ISO 279:2014 Essential oils — Determination of relative density at 20 degrees C — Reference method

CZ-CSN

CSN 73 0212-1985 Precision of geometrie parameters in the construction. Precision check
CSN 25 2300-1972 Classification of instruments and devices or measurement of the geometrical arameters of surface finish

Gosstandart of Russia

GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types
GOST 20271.1-1991 Microwave electronic devices. Methods of measuring electrical parameters
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 10387-1981 Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy
GOST 5368-1981 Cylindrical gear checking machines. Types. Basic parameters. Accuracy limits
GOST 34733-2021 Liquid Petroleum Products. Method of Determining Density, Relative Density, and API Gravity Using a Digital Densitometer
GOST 11357-1989 Fine-modul bevel gear testers. Types and main specifications. Accuracy norms
GOST 28376-1989 Compact disk. Parameters and dimensions
GOST 27667-1988 Compact disc digital audio system. Parameters
GOST R 57395-2017 Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters
GOST 23012-1978 Devices multiposition counting indicated and sivitching. Basic parameters
GOST 22091.0-1984 X-ray devices. General requirements for measuring of parameters
GOST 27311-1987 High voltage seald complete distributors. Parameters
GOST 28953-1991 Photosensitive charge transfer device. Measuring methods for parameters
GOST 22091.14-1986 X-ray devices. The method of measuring the energy flow density (photon flux density) of X-radiation
GOST 21107.4-1975 Gas discharge devices. Ignitrons. Methods for measurement of parameters
GOST 9459-1987 Gauges for bevel gears and gear pairs. Types. Basic parameters. Accuracy limits

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD63-1998 Standard Method for Calculating the Electromigration Model Parameters for Current Density and Temperature

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 61874:2016 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
BH GSO ISO 14577-3:2015 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
BH GSO ISO 279:2016 Essential oils -- Determination of relative density at 20 degrees C -- Reference method

Association of German Mechanical Engineers

VDI/VDE 2617 BLATT 2.2-2018 Accuracy of coordinate measuring machines — Parameters and their testing — Form measurement with coordinate measuring machines
VDI/VDE 2617 Blatt 2.2-1999 Accuracy of coordinate measuring machines - Parameters and their reverification - Form measurement
VDI/VDE 2617 BLATT 8-2013 Accuracy of coordinate measuring machines - Characteristics and their checking - Test suitability of measurements with coordinate measuring machines
VDI/VDE 2617 BLATT 8-2017 Accuracy of coordinate measuring machines - Characteristics and their testing - Test suitability of measurements with coordinate measuring machines
VDI/VDE 2617 BLATT 8-2018 Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines

GCC Standardization Organization

GSO IEC 61874:2015 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
GSO ISO 10260:2013 Water quality -- Measurement of parameters -- Spectrometric determination of the chlorophyll-a concentration
GSO 1208:2002 Determination of density and relative density of liquids by digtal density meter .
GSO ISO 4373:2024 Hydrometry — Water level measuring devices

British Standards Institution (BSI)

BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
24/30490989 DC BS IEC 61874 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
BS EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Method of traceability for measuring instruments through reference to the international standard instrument
12/30248590 DC BS ISO 14577-3. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 3. Calibration of reference blocks
24/30458534 DC BS EN ISO 14577-3 Metallic materials -Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN ISO 15212-1:1999 Oscillation-type density meters — Part 1: Laboratory instruments
BS PD ISO/TS 20758:2019 Traditional Chinese medicine. Abdominal physiological parameter detectors
PD ISO/TS 20758:2019 Traditional Chinese medicine. Abdominal physiological parameter detectors
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS ISO 279:1998(2001) Essential oils — Determination of relative density at 20 ºC — Reference method
BS EN ISO 7971-2:2019 Cereals. Determination of bulk density, called mass per hectolitre. Method of traceability for measuring instruments through reference to the international standard instrument
BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods

Ente Nazionale Italiano di Unificazione

UNI EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
UNI EN ISO 15212-1:2000 Oscillation-type density meters - Laboratory instruments.
UNI EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
UNI EN ISO 14577-1:2004 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

PT-IPQ

NP 1695-1980 Crude oil and liquid petroleum products. Measurement of density and relative density by densitometer

CN-KA

KA/T 17-2023 Density logging instrument for coal mines

The Directorate General of Specifications and Metrology (DGSM)

OS GSO 1208:2002 Determination of density and relative density of liquids by digtal density meter .
OS GSO ISO 14577-3:2014 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
OS GSO ISO 7971-2:2010 Cereals -- Determination of bulk density, called mass per hectolitre -- Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
OS GSO ISO 279:2015 Essential oils -- Determination of relative density at 20 degrees C -- Reference method

U.S. Military Regulations and Norms

ARMY A-A-52316 C-2010 TESTER, CONSTRUCTION MATERIALS, MOISTURE& DENSITY (TCMMD)

German Institute for Standardization

DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN EN 12697-9 E:1997-12 Methods for determination of density of bitumen - Part 9: Determination of reference density using a gyratory compactor
DIN EN ISO 14577-3 E:2012-03 Instrumental indentation testing of metallic materials hardness and material parameters Part 3: Calibration of hardness standard blocks (draft)
DIN 53840-1:1983-11 Testing of textiles; determination of parameters for the crimp of textured filament yarns; filament yarns with a linear density of up to 500 dtex
DIN EN ISO 14577-3 E:2024-09 Draft Document - Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO/DIS 14577-3:2024); German and English version prEN ISO 14577-3:2024
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN 2271-3:2000 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
DIN 2271-3:1976 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing

Spanish Association for Standardization (UNE)

UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN ISO 14577-3:2005 Metallic materials - Instrumented indentation test for hardness and materials parameters. Part 3: Calibration of reference blocks (ISO 14577-3:2002)
UNE 82302:1992 CLASSIFICATION OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH.
AENOR UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)

Bureau of Indian Standards

IS 17144-3-2019 Metallic Materials â€” Instrumented Indentation Test for Hardness and Materials Parameters Part 3 Calibration of Reference Blocks
IS 17144-1-2019 Metallic Materials â€” Instrumented Indentation Test for Hardness and Materials Parameters Part 1 Test Method

TR-TSE

TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH

Danish Standards Foundation

DS/ISO 1878:1989 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
DS/EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
DANSK DS/EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)

International Electrotechnical Commission (IEC)

IEC 61874:1998 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ("density logging")

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 3763-1994 Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation

South African Bureau of Standard

SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks

Standards Norway

NS-EN ISO 14577-3:2002 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks (ISO 14577-3:2002)
NS-EN ISO 14577-3:2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks (ISO 14577-3:2015)

Association Francaise de Normalisation

NF ISO 279:1999 Essential oils - Determination of relative density at 20 degrees Celsius - Reference method

CEN - European Committee for Standardization

EN ISO 7971-2:2019 Cereals - Determination of bulk density@ called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

European Committee for Standardization (CEN)

EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)

Lithuanian Standards Office

LST EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002)

Magyar Szabványügyi Testület

MSZ 4722-1984 Surface roughness parameters and main parameter values

Standard Association of Australia （SAA）

AS 2849:1986 Density of water - Numerical value
AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block

CH-SNV

SN ISO 105/E01:1984 Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel

YU-JUS

JUS B.B8.032-1980 Testing of natural stone. Determination of bulk density, density, coefficient of density, and porosity

Swedish Institute for Standards

SS-EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
SS-EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)

VN-TCVN

TCVN 4996-2-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 2: Method of traceability for measuring instruments through reference to the international standard instrument