machine recommendation ring

machine recommendation ring, Total:144 items.

The international standard classification for "machine recommendation ring" includes: Extraction and processing of petroleum and natural gas , Plain bearings .

The Chinese standard classification for "machine recommendation ring" includes: Hygiene, safety and labor protection , Petroleum drilling , Fuel system and its accessories , Technical management , Sliding bearing .

Professional Standard - Petroleum

SY 6629-2005 Recommended Practices for Environmental Protection in Onshore Drilling Operations
SY/T 6416-2014 Recommended practice for installation, operation and maintenance of engine
SY 6416-2014 Engine Installation, Operation and Maintenance Recommended Practices
SY/T 6518-2012 Recommended Practice for Guarding of Pumping Units
SY/T 6628-2005 Onshore oil and gas production practices for protection of the environment
SY/T 6672-2006 Natural gas processing plant recommended practices for protection of the environment
SY/T 6518-2001 Recommended practice for guarding of pumping units
SY 6672-2006 Recommended Practices for Protecting the Environment in Natural Gas Processing Plants
SY 6518-2012 Recommended Practices for Pumping Unit Protection
SY/T 7089-2016 Recommended practice for offshore platform drilling rig selection
SY 6628-2005 Recommended Practices for Environmental Protection of Onshore Oil and Gas Production
SY 7089-2016 Recommended method for offshore platform drilling rig selection
SY/T 6629-2005 Land drilling practices for protection of the environment

未注明发布机构

ANSI/BHMA A156.28-2023 RECOMMENDED PRACTICES for MECHANICAL KEYING SYSTEMS
ANSI/BHMA A156.28-2018 RECOMMENDED PRACTICES FOR MECHANICAL KEYING SYSTEMS

国家能源局

SY/T 7294-2016 Recommended practices for environmental protection of onshore oil and gas gathering and transportation

Group Standards of the People's Republic of China

T/CPI 13004-2023 Recommended practices for periodic inspection of oil drilling rigs and workover rigs

Professional Standard - Aviation

HB 6484-1990 Recommended symbols for schematic diagram of aircraft fuel system

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 39139.2-2023 Shale gas—Environmental protection—Part 2：Recommended practice for environmental protection of production operations
GB/T 89139.2-2023 Environmental Protection of Shale Gas Part 2: Recommended Practices for Environmental Protection of Production Operations
GB/T 99139.2-2023 Environmental Protection of Shale Gas Part 2: Recommended Practices for Environmental Protection of Production Operations

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37677-2019 Plain bearings—Recommendations for automotive crankshaft bearing environments

Institute of Electrical and Electronics Engineers (IEEE)

AIEE No 430-1958 AIEE Proposed Recommended Practice for Toroial Magnetic tape Wound Cores
RP 431-2:2011 RP 431-2:2011 - SMPTE Recommended Practice - D-Cinema Quality — Reference Projector and Environment
IEEE 126-1959 IEEE Recommended Specification for Speed Governing of Internal Combustion Engine-Generator Units
AIEE No 606-1959 AIEE Recommended Specification for Self Governing of Internal Combustion Engine-Generator Units
IEEE Std 485-2020 IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
IEEE Std 485-1997 IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
IEEE 1129-1992 Recommended practice for monitoring and instrumentation of turbine generators
IEEE No 77-1965 IEEE Recommended Practice for Electric Installations on Textile Machinery
IEEE 77-1965 IEEE Recommended Practice for Electric Installations on Textile Machinery
IEEE 485-2020 IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
IEEE Std 1013-2000 IEEE Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) Systems
IEEE Std 2455-2023 IEEE Recommended Practice for the Repair and Maintenance of Direct Current Electric Machines
IEEE Std 43-2013 IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery
IEEE Std 485-2010 IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
IEEE 2455-2023 IEEE Recommended Practice for the Repair and Maintenance of Direct Current Electric Machines
IEEE Std 1019-2004 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
IEEE Std 1013-1990 IEEE Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) Systems
P43/D17, January 2013 IEEE Draft Recommended Practice for Testing Insulation Resistance of Electric Machinery
IEEE Std 602-1996 [The White Book] IEEE Recommended Practice for Electric Systems in Health Care Facilities
IEEE Std 1017.3-2021 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable--Polypropylene Insulation
IEEE 1017.3-2021 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable--Polypropylene Insulation

International Telecommunication Union (ITU)

ITU-T I.374-1993 (WITHDRAWN) Framework Recommendation on
ITU-R BT.2087-0-2015 Colour conversion from Recommendation ITU-R BT.709 to Recommendation ITU-R BT.2020

Cooling Technology Institute

CTI PFM-116-1959 Recommended Recirculation Allowances

Instrument Society of America (ISA)

ISA TR52.00.01-2006 Recommended Environments for Standards Laboratories
ISA RP52.1-1975 Recommended Environments for Standards Laboratories

Society of Automotive Engineers (SAE)

SAE J1211-1978 Recommended Environmental Practices for Electronic Equipment Design, Recommended Practice November 1978
SAE ARP493A-2002 Knobs, Control Aircraft, Recommended Design
SAE ARP493-1991 KNOBS, CONTROL AIRCRAFT, RECOMMENDED DESIGN
SAE ARP493A-2011 Knobs, Control Aircraft, Recommended Design
SAE J1455-1994 (R) Joint SAE/TMC Recommended Environmental Practices for Electronic Equipment Design (Heavy-Duty Trucks), Recommended Practice August 1994
SAE J2379-1997 Performance Engine Building Recommended Practices
SAE J2114-2011 Dolly Rollover Recommended Test Procedure (Stabilized Type)
SAE J782-1980 Motor Vehicle Seating Manual, Recommended Practice
SAE J1877-1988 Recommended Practice for Bar-Coded Vehicle Identification Number Label, Recommended Practice

International Organization for Standardization (ISO)

ISO/TR 27507:2010 Plain bearings - Recommendations for automotive crankshaft bearing environments
ISO 6175:1983 Textile machinery and accessories — Recommended profile threads for weaver's beams

SCC

AS B129:1955 Recommended designs for plug, ring and gap gauges
BHMA A156.28-2023 Recommended Practices for Mechanical Keying Systems
AS 1336:1982 Recommended practices for eye protection in the industrial environment

SAE - SAE International

SAE ARP493A-2001 Knobs@ Control Aircraft@ Recommended Design
SAE ARP493B-2017 Knobs@ Control Aircraft@ Recommended Design
SAE ARP493-1964 Knobs@ Control Aircraft@ Recommended Design
SAE J2379-2019 Performance Engine Building Recommended Practices
SAE J2008CD-1998 Recommended Organization Vehicle Service Information
SAE J2026-1991 Recommended Practice for the Selection of Engineering Workstations@ Recommended Practice
SAE J2026-1997 Recommended Practice for the Selection of Engineering Workstations@ Recommended Practice
SAE J1616-1994 Recommended Practice for Compressed Natural Gas Vehicle Fuel@ Recommended Practice
SAE J1159-1992 PREPARATION OF SAE TECHNICAL REPORTS - SURFACE VEHICLE AND MACHINES; STANDARDS@ RECOMMENDED PRACTICES@ INFORMATION REPORTS@ RECOMMENDED PRACTICE
SAE J2114-1993 Dolly Rollover Recommended Test Procedure@ Recommended Practice
SAE J800C-1973 Motor Vehicle Seat Belt Assembly Installation@ Recommended Practice
SAE AIR4771A-2009 Recommended Brace Positions
SAE J1499-1987 Band Friction Test Machine (SAE) Test Procedure@ Recommended Practice

Consumer Electronics Association （U.S.)

CEA-CEB3-1998 Recommended Practice for Camcorder Specifications
CEA-CEB12-A-2003 PSIP Recommended Practice

Danish Standards Foundation

DS/R 464 E:1994 Recommendation for corrosion protection of steel structures in marine environments

BHMA - Builders Hardware Manufacturers Association Inc.

A156.28-2013 RECOMMENDED PRACTICES FOR MECHANICAL KEYING SYSTEMS
A156.28-2018 RECOMMENDED PRACTICES FOR MECHANICAL KEYING SYSTEMS
A156.28-2007 RECOMMENDED PRACTICES FOR MECHANICAL KEYING SYSTEMS

CZ-CSN

CSN 01 4090-1976 Recommended diameters of drillers for threads of nuts
CSN ON 24 2364-1966 Recommended inserts for boring heads

American National Standards Institute （ANSI)

ANSI/BHMA A156.28-2013 Recommended Practices for Keying Systems
ANSI/SCTE 158-2009 Recommended Environmental Condition Ranges for Broadband Communications Equipment
ANSI/IEEE 1310:2004 Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Generators
ANSI/NECA 406-2003 Recommended Practice for Installing Residential Generator Sets

(U.S.) Builders Hardware Manufacturers Association

BHMA A156.28-2013 RECOMMENDED PRACTICES FOR MECHANICAL KEYING SYSTEMS

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 606-1959 Recommended Specification for SPEED GOVERNING OF INTERNAL COMBUSTION ENGINE-GENERATOR UNITS
IEEE 1051-1988 Recommended Practice for Parameters to Characterize Digital Loop Performance

API - American Petroleum Institute

API RP 7H-1979 RECOMMENDED PRACTICE FOR DRILLING MACHINERY (First Edition)
API RP 11ER-2009 Recommended Practice for Guarding of Pumping Units (Third Edition)
API RP 11ER-1990 Recommended Practice for Guarding of Pumping Units (Second Edition)
API RP 11PGT-1992 Recommended Practice for Packaged Combustion Gas Turbines (First Edition)
API RP 11ER-1976 RECOMMENDED PRACTICE FOR GUARDING OF PUMPING UNITS FIRST EDITION
API RP 10D-2-2004 Recommended Practice for Centralizer Placement and Stop Collar Testing (First Edition)

Korean Agency for Technology and Standards (KATS)

KS B 0431-1982 Recommendation of grinding wheels
KS B 0431-1993 Recommendation of grinding wheels
KS B 0431-2017 Recommendation of grinding wheels
KS B 0431-2017(2022) Recommendation of grinding wheels
KS A 3011-1998(2018) MENDED LEVELS OF ILLUMINATION
KS B 0889-1997(2017) Recommended practice for friction
KS B 0887-2016 Recommended practice for brazing
KS B 0887-2021 Recommended practice for brazing
KS A 3011-1993 Recommended levels of illumination

American Railway Engineering and Maintenance-of-Way Association (AREMA)

AREMA CH 33-3-1978 Recommended Voltages

IN-BIS

IS 7287-1974 Recommended working dimensions for woodworking machinery
IS 7229-1974 Recommended working heights for woodworking machinery
IS 2182-1962 Recommended symbols on machine tool signage
IS 8547-1977 Recommended overall dimensions of automatic loom single box picking machine
IS 10341-1982 Recommended Oil Press Sizes and Capacities (Single Chamber)
IS 7227-1974 Recommended wheel diameters for woodworking bench band saws
IS 3655-1985 Recommended practices for electroplating
IS 2679-1964 Recommended electroplating equipment
IS 9012-1978 Recommended Shotcrete Practices

American Petroleum Institute (API)

API RP 11ER-2009(2020) Recommended Practice for Guarding of Pumping Units
ANSI/API RP 10D-2:2004(2020) Recommended Practice for Centralizer Placement and Stop Collar Testing (First Edition)
API RP 11G-2013(2019) "Recommended Practice for Installation, Maintenance, and Lubrication of Pumping Units"

NATO - North Atlantic Treaty Organization

STANAG 3827-1989 "Recommended Requirements for Training of Aircrew in High Sustained ""G"" Environment (ED 2 AMD 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 7

Electronic Components, Assemblies and Materials Association

ECA 386-1971 Phonograph Rumble, Recommended Measurement Method for

IETF - Internet Engineering Task Force

RFC 2221-1997 IMAP4 Login Referrals
RFC 2193-1997 IMAP4 Mailbox Referrals

European Committee for Standardization (CEN)

HD 97 S1-1978 Recommended methods of measurement on receivers for freqency-modulation broadcast transmissions

ECIA - Electronic Components Industry Association

386-1971 Phonograph Rumble@ Recommended Measurement Method for

Japanese Industrial Standards Committee (JISC)

JIS Z 9116:2022 Recommendation for tunnels lighting
JIS Z 9110:1979 Recommended levels of illumination
JIS Z 9127:2020 Recommendation for sports lighting
JIS B 4051:1988 Recommendation of grinding wheels
JIS Z 9126:2021 Recommendation for outdoor lighting
JIS B 4051:2014 Recommendation of grinding wheels

A4A - Airlines for America

SG 903-2006 Recommended Guidelines for Prev/Inv Aircraft Ground Damage
SG 903-2014 SG 903: Recommended Guidelines for Prev/Inv Aircraft Ground Damage

ESD - ESD ASSOCIATION

S6.1-1991 Grounding - Recommended Practice
S6.1-1999 Grounding - Recommended Practice

Building Officials and Code Administrators International(U.S.)

BOCA IMC-2000 APPENDIX B-2000 Recommended Permit Fee Schedule

Indonesia Standards

SNI 04-6262-2000 Recommendation for road lighting for motor vehicles and pedestrian

US-AAMA

AAMA 506-2008 Voluntary Specifications for Impact and Cycle Testing of Fenestration Products

TR-TSE

TS 2711-1977 RECOMMENDATIONS FOR SOUND LEVEL METERS

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC EIA-397-1972 Recommended Standards for Thyristors

BR-ABNT

ABNT EB-82R-1954 Sodium Chloride Recommended Properties

Compressed Gas Association (U.S.)

CGA G-1.6-2008 Recommended practices for mobile acetylene trailer systems

British Standards Institution (BSI)

BS 7258-2:1994 Laboratory fume cupboards - Recommendations for the exchange of information and recommendations for installation

PL-PKN

PN C89064-1986 Plastics Recommended practice for preparing of test specimens by machining

ECMA - European Association for Standardizing Information and Communication Systems

TR 8-1977 Recommended OCR Paper Specification@ Mechanical Properties (2nd Edition)

Others: Ring block friction testing machine,Ring block friction and wear testing machine,Block ring friction and wear testing machine,Ring Block Wear Tester,Ring block testing machine,Ring block testing machine,Ring block wear testing machine,Ring Block Wear Tester,Ring block friction testing machine,Ring testing machine,Local ring block testing machine,near ring block testing machine,High quality ring block testing machine,Vibrating screen machine recommended,machine recommendation ring,Automatic ring milling machine,Ring Shear Tester,EIA of shot blasting machine,Water ring vacuum pumps and water ring compressors