electrical orientation material

electrical orientation material, Total:178 items.

The international standard classification for "electrical orientation material" includes: Reinforced plastics , Steels with special magnetic properties , Mica based materials , Films and sheets , Chemical analysis , Man-made fibres .

The Chinese standard classification for "electrical orientation material" includes: Fibre reinforced composites , Electrotechnical steel , Electrical insulating material and its products , Plastic profile , Steel sheet and strip , Chemical fibre .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2521-2008 Cold-rolled grain-oriented and non-oriented electrical steel strip (sheet）
GB/T 30967-2014 Practice for fiber reinforcement orientation codes for composite materials
GB/T 41791-2022 Plastics—Film and sheeting—Non-oriented poly(ethylene terephthalate) (PET) sheets
GB/T 5021-2002 Commutator separators and materials
GB/T 2521-1996 Cold-rolled grain-oriented and non-oriented magnetic steel strip(sheet)

Professional Standard - Customs

HS/T 63-2019 Orientation distinguishing of flat-rolled products ofsilicon-electrical steel

Group Standards of the People's Republic of China

T/CIDA 0022-2023 Biaxial oriented unplasticized poly (vinyl chloride) (PVC-O) pipes for irrigation
T/GZHG 003-2019 Biaxially oriented polyvinyl chloride (PVC-O) pipes for electric power and communication
T/SSEA 0326-2023 Cold-rolled non-oriented electrical steel strip (sheet) for new energy vehicle fuel cell air compressor motor
T/ZZB 1571-2020 Biaxial oriented environmentally-friendly poly(vinyl chloride) (PVC-O) pipe for power cable protection
T/SHDSGY 036-2022 The c-rod material used in automobile switchgear
T/CSTA 0051-2023 Cold-rolled non-oriented electrical steel strip (sheet) for new energy vehicle fuel cell air compressor motor
T/SSEA 0175-2022 Ultra-thin and ultra-thin strips of grain-oriented electrical steel

Professional Standard - Commodity Inspection

SN/T 3514-2013 Identification method of texture analysis for grain oriented and non-oriented electrical steels. X-ray diffraction(XRD)

Professional Standard - Textile

FZ/T 54066-2013 Cationic dyeable modified polyester partially oriented yarns

Swedish Institute for Standards

SIS SS 03 12 14-1987 Flexible materials - Code for stating of reeling direction and prirtt orientation
SS-EN 10106:2015 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
SS 112622:1983 Metallic materials - Wire - Reverse bend test
SS-EN 10106:2007 Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state

British Standards Institution (BSI)

BS EN 60674-3-1:1998+A1:2011 Plastic films for electrical purposes. Specifications for individual materials. Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors
BS ISO 15987:2003 Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films
BS IEC 60404-8-7:2020 Magnetic materials - Specifications for individual materials. Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
BS 6404-8-8.7:1988 Magnetic materials. Individual materials-Specification for grain-oriented magnetic steel sheet and strip
BS 6404-8-8.4:1986 Magnetic materials. Individual materials-Specification for cold-rolled, non-oriented magnetic steel sheet and strip delivered in the finally annealed state
BS ISO 15988:2003 Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films
15/30334738 DC BS EN 60404-8-7. Magnetic materials. Part 8-7. Specifications for individual materials. Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state
18/30383939 DC BS IEC 60404-8-7. Magnetic materials. Part 8-7. Specifications for individual materials. Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state
21/30435690 DC BS IEC 60404-8-4. Magnetic materials. Part 8-4. Specifications for individual materials. Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
20/30403969 DC BS IEC 60404-8-4. Magnetic materials. Part 8-4. Specifications for individual materials. Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
12/30261766 DC BS EN 60404-8-4. Magnetic materials. Specifications for individual materials. Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
BS 6404-8-8.2:1986 Magnetic materials. Individual materials-Specification for cold-rolled, magnetic, non-oriented, alloyed steel strip delivered in the semi-processed state
BS EN 10107:2022 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
BS EN 10106:2015 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
BS EN 60674-3-2:1995 Specification for plastic films for electrical purposes - Specifications for individual materials - Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation
BS 6404-8-8.3:1986 Magnetic materials. Individual materials-Specification for cold-rolled, magnetic, non-oriented, non-alloyed steel strip delivered in the semi-processed state
BS EN IEC 60404-17:2021 Magnetic materials - Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor
BS IEC 62899-202-8:2024 Printed electronics - Materials. Conductive ink. Measurement of difference in resistance of printing direction of conductive film fabricated with wire-shaped materials
BS 601-2:1961 Steel sheets for magnetic circuits of power electrical apparatus. Oriented steel
BS ISO 7800:2012 Metallic materials. Wire. Simple torsion test
BS ISO 7801:2024 Metallic materials. Wire. Reverse bend test
BS ISO 17555:2003 Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films
05/30136183 DC IEC 60404-8-7. Magnetic materials. Part 8-7. Specification of individual materials. Cold-rolled grain-oriented electrical steel sheet and strip delivered in the fully-processed state
BS EN 875:1995 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
BS EN ISO 9016:2012 Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
BS EN 60674-3-2:1998 Specification for plastic films for electrical purposes. Specifications for individual materials-Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation
BS EN 60371-3-1:1995 Specification for insulating materials based on mica. Specifications for individual materials-Commutator separators and materials

International Organization for Standardization (ISO)

ISO 15987:2003 Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films
ISO 15988:2003 Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films
ISO 7801:2024 Metallic materials — Wire — Reverse bend test
ISO 7800:1984 Metallic materials; Wire; Simple torsion test
ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
ISO 7800:2003 Metallic materials - Wire - Simple torsion test
ISO 9649:2023 Metallic materials — Wire — Reverse torsion test
ISO/CD 7801 Metallic materials — Wire — Reverse bend test
ISO 7800:2012 Metallic materials - Wire - Simple torsion test
ISO 11648-2 Statistical aspects of sampling from bulk materials - Part 2: Sampling of particulate materials
ISO 6257:1980 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Sampling

Korean Agency for Technology and Standards (KATS)

KS C IEC 60674-3-1:2019 Plastic films for electrical purposes ― Part 3: Specifications for individual materials ― Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS C IEC 60674-3-1-2019 Plastic films for electrical purposes ― Part 3: Specifications for individual materials ― Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS C IEC 60674-3-1:2014 Plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS M ISO 15987-2017 Plastics - Film and sheeting - Biaxially oriented polyamide(nylon) films
KS C IEC 60404-8-4-2020 Magnetic materials － Part 8 － 4: Specifications forindividual materials － Cold － rolled non － oriented electrical steel sheet and strip delivered in the fully － processed state
KS C IEC 60404-8-4-2015(2020) Magnetic materials － Part 8 － 4: Specifications forindividual materials － Cold － rolled non － oriented electrical steel sheet and strip delivered in the fully － processed state
KS M ISO 13636-2019 Plastics — Film and sheeting — Non-oriented poly(ethylene terephathalate)(PET) sheets
KS C IEC 60404-8-7-2015(2020) Magnetic materials－Part 8－7：Specifications for individual materials－Cold－rolled grain－oriented electrical steel sheet and strip delivered in the fully－processed state
KS C IEC 60404-8-7-2020 Magnetic materials－Part 8－7：Specifications for individual materials－Cold－rolled grain－oriented electrical steel sheet and strip delivered in the fully－processed state
KS C IEC 60674-3-1-2019(2024) Plastic films for electrical purposes ― Part 3: Specifications for individual materials ― Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS M ISO 13636-2014(2019) Plastics — Film and sheeting — Non-oriented poly(ethylene terephathalate)(PET) sheets
KS M ISO 13636-2014(2024) Plastics — Film and sheeting — Non-oriented poly(ethylene terephathalate)(PET) sheets
KS M ISO 15988-2017 Plastics - Film and sheeting - Biaxially oriented poly(ethyleneterephthalate) (PET) films
KS M ISO 15987-2017(2022) Plastics - Film and sheeting - Biaxially oriented polyamide(nylon) films
KS C 2516-1989(2009) Non-oriented magnetic steel sheet and strip
KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
KS C 2517-1994 Grain-oriented magnetic steel sheet and strip
KS B ISO 7800:2015 Metallic materials－Wire－Simple torsion test
KS B ISO 7800:2002 Metallic materials-Wire-Simple torsion test
KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test
KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test
KS B ISO 7801-2015 Metallic materials－Wire－Reverse bend test
KS M ISO 15988:2017 Plastics - Film and sheeting - Biaxially oriented poly(ethyleneterephthalate) (PET) films
KS C 2516-1989 Non-oriented magnetic steel sheet and strip
KS C IEC 60674-3-8-2023 Plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 8: Balance biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
KS M ISO 6375:2013 Carbonaceous materials for the production of aluminium－Cokes for electrodes－Sampling
KS C 2516-1982 Non-oriented magnetic steel sheet and strip

Association Francaise de Normalisation

NF C26-145-3-1/A1*NF EN 60674-3-1/A1:2012 Plastic films for electrical purposes - Part 3 : specifications for individual materials - Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors
NF EN 10107:2022 Grain-oriented electrical steel strips and sheets delivered in finished condition
NF EN IEC 60674-3-1:2021 Plastic films for electrical uses - Part 3: specifications for particular materials - Sheet 1: bioriented polypropylene (PP) films for capacitors
NF C26-145-3-1*NF EN 60674-3-1:1998 Plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors.
NF EN 10106:2015 Cold-rolled, finished non-grain-oriented electrical steel strips and sheets
NF C26-145-3-1*NF EN IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3 : specifications for individual materials - Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors
NF A89-202:2013 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination

American Society for Testing and Materials (ASTM)

ASTM STP 405-1966 Orientation Effects on Mechanical Behavior in Anisotropic Structural Materials
ASTM D2530-81 Nonoriented Propylene Plastic Film

International Electrotechnical Commission (IEC)

IEC 60404-8-7:1988 Magnetic materials. Part 8: Specifications for individual materials. Section Seven - Specification for grain-oriented magnetic steel sheet and strip
IEC 60404-8-3:2023 Magnetic materials — Part 8-3: Specifications for individual materials — Cold-rolled non-oriented electrical steel strip and sheet delivered in the semi-processed state
IEC 60674-3-1:2011 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
IEC 60674-3-1:1998+AMD1:2011 CSV Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors
IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
IEC 60674-3-1:2021 RLV Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
IEC 60404-8-7:2020 Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state
IEC 60404-8-7:2017 RLV Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state
IEC 60404-8-4:2022 Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60404-8-4:2022 RLV Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60404-8-7:2020 RLV Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60404-8-7:1988/AMD1:1991 Amendment 1 - Magnetic materials. Part 8: Specifications for individual materials. Section Seven: Specification for grain-oriented magnetic steel sheet and strip
IEC 60674-3-8:2011+AMD1:2016 CSV Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
IEC 60674-3-8:2011/AMD1:2016 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
IEC 60404-8-7:1998 Materiaux Magnetiques - Partie 8-7: Specifications Pour Materiaux Particuliers - Toles Magnetiques En Acier A Grains Orientes@ Laminees A Froid Et Livrees A L?Etat Fini (Edition 2.0)

Military Standards (MIL-STD)

MIL MIL-P-15011J-1985 PALLET, MATERIAL HANDLING, WOOD, POST CONSTRUCTION, 4 WAY ENTRY (SUPERSEDING MIL-P-15011H)

Yugoslav Association for Standardization

JUS C.X5.048-1990 Magnetic staterials. Specifications for individual materials. Specification for cold-rolled non-oriented magnetic steel sheet and strip

Spanish Association for Standardization (UNE)

AENOR UNE 53032:1974 Plastic materials. Determination of the resistance and transverse resistivity of thermoset plastic materials.
UNE-EN 10106:2016 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
AENOR UNE-EN 10107:2014 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
UNE-EN 10107:2023 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
UNE-EN 60674-3-1:1999 PLASTIC FILMS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: BIAXIALLY ORIENTED POLYPROPYLENE (PP) FILM FOR CAPACITORS.
UNE-EN 60674-3-8:2011/A1:2017 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation (Endorsed by Asociación Española de Normalización in ...

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 13636:2016 Plastics - Film and sheeting - Non-oriented poly(ethylene terephthalate) (PET) sheets
BH GSO ISO 9649:2016 Metallic materials -- Wire -- Reverse torsion test

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 13636:2013 Plastics - Film and sheeting - Non-oriented poly(ethylene terephthalate) (PET) sheets
OS GSO ISO 9649:2015 Metallic materials -- Wire -- Reverse torsion test
OS GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
OS GSO ISO 11648-2:2015 Statistical aspects of sampling from bulk materials -- Part 2: Sampling of particulate materials

South African Bureau of Standard

SANS 7801:2003 Metallic materials - Wire - Reverse bend test

Indonesia Standards

SNI 07-4611-1998 Reverse bend test for metallic material wires

Czech Standards Institute (UNMZ)

CSN ISO 9649:1994 Metallic materials. Wire. Reverse torison test
CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
CSN 72 2624-1977 Radial bricks. Material specification

Standards Norway

NS-EN 10107:2014 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
NS-EN 10106:2015 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state

Danish Standards Foundation

DANSK DS/EN 10107:2014 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
DANSK DS/IEC 60404-8-4:2022 Magnetic materials – Part 8-4: Specifications for individual materials – Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
DANSK DS/EN 10106:2015 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
DANSK DS/ISO 11648-2:2002 Statistical aspects of sampling from bulk materials - Part 2: Sampling of particulate materials

Ente Nazionale Italiano di Unificazione

UNI EN 10107:1998 Grain-oriented electrical steel sheet and strip delivered in the fully processed state
UNI 4901-1962 Elastic material: raw material, natural latex. sampling

Comitato Elettrotecnico Italiano

CEI IEC 60404-8-7:2024 Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state

German Institute for Standardization

DIN EN 10106:2016-03 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state; German version EN 10106:2015
DIN EN 10107:2022-11 Grain-oriented electrical steel strip and sheet delivered in the fully processed state; German version EN 10107:2022
DIN EN 60674-3-1:2012 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998 + A1:2011); German version EN 60674-3-1:1998 + A1:2011
DIN 50433-3:1982 Testing of materials for semiconductor technology; determination of the orientation of single crystals by means of Laue back scattering
DIN 16941:1986 Thermoplastics extruded profiles; general tolerances of size, form and orientation
DIN EN 10107 E:2012-04 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
DIN EN 10107 E:2021-07 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
DIN ISO 9649:2018-01 Metallic materials - Wire - Reverse torsion test (ISO 9649:2016)
DIN 16941 E:2012-03 Draft Document - Thermoplastics extruded profiles - General tolerances of size, form and orientation
DIN 16941:2012 Thermoplastics extruded profiles - General tolerances of size, form and orientation
DIN 16941:1964 Thermoplastics extruded profiles - General tolerances of size, form and orientation
DIN 50433-3:1982-04 Testing of materials for semiconductor technology; determination of the orientation of single crystals by means of Laue back scattering
DIN 1312:1972-03 Geometrical Orientation
DIN 51937:1994 Testing of carbon materials; determination of anisotropy degree; solid materials

European Committee for Standardization (CEN)

EN 10107:2022 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
prEN 875-1992 Welding; welded joints in metallic materials; specimen location and notch orientation for impact tests
EN 875:1995 Destructive Tests on Welds in Metallic Materials - Impact Tests - Test Specimen Location, Notch Orientation and Examination

Suppliers of Advanced Composite Materiats Association

SRM 1R-94 Recommended Test Method for COMPRESSIVE PROPERTIES OF ORIENTED FIBER-RESIN COMPOSITES

GCC Standardization Organization

GSO IEC 60404-8-7:2024 Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
GSO ISO 6375:2013 Carbonaceous materials for the production of aluminium -- Coke for electrodes -- Sampling
GSO ISO 9649:2015 Metallic materials -- Wire -- Reverse torsion test
GSO ISO 11648-2:2015 Statistical aspects of sampling from bulk materials -- Part 2: Sampling of particulate materials

Japanese Industrial Standards Committee (JISC)

JIS C 2330:2001 Biaxially oriented polypropylene (PP) films for capacitors

Bureau of Indian Standards

IS 1716-2023 Metallic Materials Wire Reverse Bend Test

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 4641-1988 Sintered materials.Sampling
TCVN 1827-2006 Metallic materials.wire.Simple torsion test
TCVN 5402-2010 Destructive tests on welds in metallic materials.Impact test.Test specimen location, notch orientation and examination

Gosstandart of Russia

GOST ISO 7800-2013 Metallic materials. Wire. Simple torsion test
GOST 27795-1988 Photographic materials. Sampling
GOST 32268-2013 Bituminous materials. Sampling
GOST R 53934-2010 Grain-oriented electrical steel strip. Specifications
GOST R ISO 11648-2-2009 Statistical methods. Sampling from bulk materials. Part 2. Sampling of particulate materials

Portuguese Institute of Quality

NP 2984-1985 Circuit insulation materials. Insulation resistance test for transverse resistivity

GM Holden Ltd

HOLDEN HN 1432-2009 PVC COMPOUND FOR STEERING WHEELS

Austrian Standards

ONORM B 3120 Teil.3-1981 Natural stone; sampling; granular materials

Belgian Standards Institute

NBN T 03-478-1984 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling

Society of Automotive Engineers (SAE)

SAE AMS2310D Qualification Sampling and Testing of Steels, Transverse Tensile Properties

Thai Industrial Standards Institute (TISI)

TIS 1255-1994 Sampling of bituminous materials

GM North America

GM GM6009M-2003 Radial Lip Seal Materials Replaced by GMN4907

Associação Brasileira de Normas Técnicas

ABNT MB-269-1963 Refractory materials. Refractory material samples taken from

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0345-3-2-2020*DIN EN IEC 60674-3-2:2020 Plastic films for electrical purposes Part 3: Specifications for individual materials Page 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films (IEC 60674-3-2:2019)