The separation of the two peaks is

The separation of the two peaks is, Total:172 items.

The international standard classification for "The separation of the two peaks is" includes: Rubber , Limits and fits , Solid fuels .

The Chinese standard classification for "The separation of the two peaks is" includes: Rubber products in general , Basic standards and general methods , Coal petrography .

Hebei Provincial Standard of the People's Republic of China

DB13/T 81.26-1992 Determination method of exothermic peak peak temperature of fireworks and firecrackers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12833-1991 Rubber and plastics-Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GB/T 12833-2006 Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 4380-2004 Assessment of departure from roundness - Two-and three-point methods

Professional Standard - Coal

MT/T 807-1999 Separation of vitrinite group in bituminous coal

Professional Standard - Forestry

LY/T 3307-2022 Gasoline engine powered hand-push grass trimmer/cultivator

General Motors Corporation (GM)

GM 9985916-1993 Adhesive, Two-Part, Waterbased
GM 9985870-1993 Adhesive, Two-Part Acrylic, Resin
GM 9985818-1990 Adhesive, Two-Part, Epoxy
GM 9985956-1997 Adhesive, Two-Part, Acrylic
GM 9985806-1991 Adhesive, Two-Part, Acrylic
GM 9985725-1993 Adhesive, Two-Part, Acrylic Revision A
GM 9985872-1993 Adhesive, Two-Part, Acrylic, Mixture
GM 9985953-1993 Adhesive, Two-Part, Acrylic, Mix
GM 9985891-1993 Adhesive, Two-Part, Acrylic, Mixture
GM 9985915-1993 Adhesive, Two-Part, Waterbased, Curative
GM 9986091-1998 Adhesive, Two-Part, Epoxy Resin Revision A
GM 9985871-1993 Adhesive, Two-Part Acrylic, Hardener
GM 9985952-1993 Adhesive, Two-Part Acrylic, Activator
GM 9985914-1993 Adhesive, Two-Part, Waterbased, Base
GM 9985982-1994 Adhesive, Two-Part, Silicone, Base
GM 9985786-1992 Adhesive, Two-Part, Polyurethane, Structural Revision A
GM 9985787-1992 Adhesive, Two-Part, Polyurethane, Structural Revision A
GM 9985788-1992 Adhesive, Two-Part, Polyurethane, Structural Revision A
GM 9985890-1993 Adhesive, Two-Part, Acrylic, Resin
GM 9985985-1994 Adhesive, Two-Part, Epoxy, Resin
GM 9985825-1992 Adhesive, Two-Part, Polyurethane, Resin Revision A
GM 9985951-1993 Adhesive, Two-Part, Acrylic, Resin
GM 9985923-1993 Adhesive, Two-Part, Urethane, Hardener
GM 9985983-1994 Adhesive, Two-Part, Silicone, Catalyst
GM 9985602-1994 Adhesive, Two-Part, Epoxy, Resin Revision C
GM 9985826-1992 Adhesive, Two-Part, Polyurethane, Hardener Revision A
GM 9986061-1995 Adhesive, Two-Part, Epoxy Room Temperature Cure
GM 9986074-1996 Adhesive, Two-Part, Urethane, Hardener
GM 9985954-1994 Adhesive, Two-Part, Acrylic, Resin
GM 9985759-1992 Adhesive, Two-Part, Urethane, Hardener Revision A
GM 9985454-1992 Adhesive, Two-Part, Urethane, FRP Revision D
GM 9985794-1992 Adhesive, Promoter, Epoxy, Two-Part Revision A
GM 9985360-1992 Adhesive,Two-Part, Urethane, FRP Revision C
GM 9985726-1993 Adhesive, Two-Part, Acrylic, Resin Revision A
GM 9985796-1992 Adhesive, Promoter, Epoxy, Two-Part Revision A
GM 9985824-1992 Adhesive, Two-Part, Polyurethane, FRP Revision A
GM 9986092-1995 Adhesive, Two-Part, Epoxy, Hardener
GM 9985795-1992 Adhesive, Promoter, Epoxy, Two-Part Revision A
GM 9986062-1995 Epoxy, Two-Part, Room Temperature Cure, Resin
GM 9985955-1994 Adhesive, Two-Part, Acrylic, Activator
GM 9985986-1994 Adhesive, Two-Part, Epoxy, Hardener
GM 9985889-1993 Adhesive, Two-Part, Acrylic, Activator
GM 9986063-1995 Adhesive, Two-Part, Epoxy, Hardener
GM 9985600-1994 Adhesive, Two-Part, Epoxy, FRP Revision A
GM 9986090-1998 Adhesive, Induction Cure, Two-Part, Epoxy, Mixture Revision A
GM 9985981-1994 Adhesive, Two-Part Silicone, RTV, Low Volatility, Sealer
GM 9985601-1994 Adhesive, Two-Part, Epoxy, Hardener Revision C
GM 9985727-1993 Adhesive, Two-Part, Acrylic, Activator Revision A
GM 9985901-1993 Adhesive, Two-Part, Waterbased Polyurethane, Heat Activated
GM 9986073-1996 Adhesive, Two-Part, Urethane, Resin
GM 9985899-1993 Adhesive, Two-Part, Waterbased Polyurethane, Heat Activated
GM 9985758-1992 Adhesive, Two-Part, Urethane, Resin Revision A
GM 9985924-1994 Adhesive, Two-Part, Urethane, FRP-SMC
GM 9985760-1992 Adhesive, Two-Part, Urethane, FRP-SMC Revision A
GM 9985839-1992 Adhesive, Two-Part, Urethane, Hardener Revision A [Replaced: GMNA 9982188]
GM 9986075-1996 Adhesive, Two-Part, Urethane, FRP - SMC, Mixture
GM 9985838-1992 Adhesive, Two-Part, Urethane, Resin Revision A [Replaced: GMNA 9982187]
GM 9985984-1994 Adhesive, Two-Part, Epoxy, UV Set, Room Temperature Cure
GM 9985840-1994 Adhesive, Two-Part, Urethane, FRP-SMC Revision B [Replaced: GMNA 9982186]

Korean Agency for Technology and Standards (KATS)

KS R 0059-1981 DIMENSIONS OF TIRES FOR MOTORCYCLES AND SCOOTERS
KS R 0059-1981(2001) DIMENSIONS OF TIRES FOR MOTORCYCLES AND SCOOTERS
KS B 0703-2002(2017) Method of test for dynamic vibration of two - for - one twister

HU-MSZT

MSZ 7100/9.lap-1964 Pressure distance 760 mm, offset 18.3, scale 1:5, 67 small rail splits
MSZ 7100-3.lap-1960 Small rail sub-rails with a pressure distance of 760 mm deviation 10 and a scale of 1:5,67, installation and fixation of the sub-rails
MNOSZ 1408-1956 The size difference between the two tool pliers is 300 mm
MSZ 7100-5.lap-1960 A small rail split with a pressure distance of 760 mm14 and a ratio of 1:7.86

IETF - Internet Engineering Task Force

RFC 8042-2016 OSPF Two-Part Metric

GSO

GSO ISO 6133:2015 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GSO ISO 6445:2007 Doors -Behaviour between two different climates – Test method
OS GSO ISO 6133:2015 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BH GSO ISO 6133:2016 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

AT-ON

ONORM C 9444-1984 Testing of elastomers; analysis of multi-peak traces obtained in fear-, adhesion- and peel tests

Association Francaise de Normalisation

NF M62-300*NF ISO 9404-1:1992 Enclosures for protection against ionizing radiation. Lead shielding units for 150 mm, 200 mm and 250 mm thick walls. Part 1 : chevron units of 150 mm and 200 mm thickness.
NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
NF EN 1121:2000 Portes - Comportement entre deux climats différents - Méthode d'essai
NF T46-055:2005 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength.
NF L54-143-015*NF EN 2997-015:2011 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 oC to 175 oC continuous , 200 oC continuous, 260 oC peak - Part 015 : Jam-nut mounted receptacle with integrat
NF T46-055*NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak plots obtained during determinations of tear resistance and adhesion force
NF EN 60169-21:1998 Radio frequency connectors - Part 21: two types of radio frequency connectors with outer conductor inner diameter of 9.5 mm (0.374 in) with different versions of the locking system ...
NF EN 10049:2014 Measurement of the average roughness Ra and the number of peaks RPc on flat metal products
NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.

International Telecommunication Union (ITU)

ITU-R BS.1771-2012 Requirements for loudness and true-peak indicating meters
ITU-R BS.1771-2006 Requirements for loudness and true-peak indicating meters
ITU-R BS.1771 FRENCH-2006 Requirements for loudness and true-peak indicating meters Sp閏ifications des appareils de mesure indiquant l'intensit?sonore et les niveaux de cr阾e vrais
ITU-R BS.1771-1-2012 Requirements for loudness and true-peak indicating meters
ITU-T RESOLUCION 75 SPANISH-2008 ITU-T's contribution in implementing the outcomes of the World Summit on the Information Society, and the establishment of a Dedicated Group on Internetrelated Public Policy Issues as an integral part of the Council Working Group on the World Summit on th

GM North America

GM 9982186-1993 Adhesive, Two-Part, Polyurethane, RRIM Replaced by 9985840
GM 9985721-1993 Adhesive, Two Part, Polyurethane, Glass REPLACED BY 9985575
GM 9982188-1993 Adhesive, Two-Part, Polyurethane, RRIM Replaced by 9985840; Shown on 9982186
GM 9982187-1993 Adhesive, Two-Part, Polyurethane, RRIM Replaced by 9985840; Shown on 9982186

Society of Automotive Engineers (SAE)

SAE J724-1977 Farm Equipment Two Conductor Breakaway Connector Cable

United States Navy

NAVY MIL-STD-1320-239-1989 TRUCKLOADING AMPHIBIOUS UNIT LOAD 155MM PROJECTILES, SHORT ROUND
NAVY MIL-STD-1320-238-1989 TRUCKLOADING AMPHIBIOUS UNIT LOAD 155MM PROJECTILES, LONG ROUND

German Institute for Standardization

DIN 6809-5:1996 Clinical dosimetry - Part 5: Application of X-rays with peak voltages between 100 and 400 kV in radiotherapy
DIN VDE 0418-4:1967 Specifications for electric integrating meters; Maximum demand indicators
DIN ISO 6133 E:2016-09 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
DIN EN 1121:2000-09 Doors - Behaviour between two different climates - Test method; German version EN 1121:2000
DIN ISO 6133:2004 Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
DIN ISO 6133:2017 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015)
DIN 10756:2021-03 Analysis of honey - Determination of free acidity

American Gear Manufacturers Association

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair

National Aeronautics and Space Administration (NASA)

NASA-TN-D-4592-1968 Cavitating performance of two low-area-ratio water jet pumps having throat lengths of 7.25 diameters
NASA NACA-TR-658-1939 Tests of two full-scale propellers with different pitch distributions, at blade angles up to 60 degrees

SCC

AWWA JAW10248 Journal AWWA — Relationship of Bacterial Counts With Turbidity and Free Chlorine in Two Distribution Systems
NS-EN 1121:2000 Doors — Behaviour between two different climates — Test method
AENOR UNE-EN 1121:2000 Doors - Behavior between two different climates - Test methods
BS 903-A47:1982 Physical testing of rubber-Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
AWWA ACE65613 Air or Particles — What Are the Turbidity Spikes in My Membrane Effluent

British Standards Institution (BSI)

BS EN 2997-001:2011 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Technical specification
BS EN 2997-001:2017 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 200 C continuous, 260 C peak. Technical specification
BS EN 14488-3:2006 Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
BS ISO 6133:2015 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS 2X 34:1998 Specification for two component polyurethane finish for aerospace purposes
BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Spanish Association for Standardization (UNE)

UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
UNE-EN 1121:2000 Doors - Behaviour between two different climates - Test methods
UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength

European Committee for Standardization (CEN)

EN 2997-001:2017 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures - 65 ��to 175 ��continuous@ 200 ��continuous@ 260 ��peak - Part 001: Technical specification
EN 2997-001:2011 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 001: Technical specification

CEN - European Committee for Standardization

EN 2997-001:2006 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures -65°C to 175°C continuous@ 200°C continuous@ 260°C peak - Part 001: Technical specification

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R BS.1771 SPANISH-2006 Requirements for loudness and true-peak indicating meters

ETSI - European Telecommunications Standards Institute

TR 102 279-2004 Human Factors (HF); Two surveys on assistive technology (V1.1.1)

SE-SIS

SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 2665-003-1994 Aerospace Series Circuit Breakers, Three-Pole, Temperature Compensated, Rated Currents 20 A to 50 A Part 003 : Metric Thread Fasteners, Distance Between Terminal Centres 19 mm Product Standard (Edition P 1)
ASD-STAN PREN 2794-003-1994 Aerospace Series Circuit Breakers, Single-Pole, Temperature Compensated, Rated Currents 20 A to 50 A Part 003 : Metric Thread Fasteners, Distance Between Terminal Centres 19 mm Product Standard (Edition P 1)
ASD-STAN PREN 3773-003-1994 Aerospace Series Circuit Breakers, Single-Pole, Temperature Compensated, Rated Currents 1 A to 25 A, Switching Capacity 65 IN/1 000 A Max. Part 003 : Metric Thread Fasteners, Distance Between Terminal Centres 12 mm Product Standard (Edition P 1)
ASD-STAN PREN 3774-003-1994 Aerospace Series Circuit Breakers, Three-Pole, Temperature Compensated, Rated Currents 2 A to 25 A, Switching Capacity 65 IN Part 003 : Metric Thread Fasteners, Distance Between Terminal Centres 12,8 mm Product Standard (Edition P 1)

American Society for Testing and Materials (ASTM)

ASTM D4124-97 Standard Test Methods for Separation of Asphalt into Four Fractions
ASTM D4124-09(2018) Standard Test Method for Separation of Asphalt into Four Fractions
ASTM D4124-09 Standard Test Method for Separation of Asphalt into Four Fractions
ASTM D4124-01 Standard Test Methods for Separation of Asphalt into Four Fractions
ASTM RR-D02-1748 2012 D7061-Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
ASTM D5392-93(2006) Standard Test Method for Isolation and Enumeration ofEscherichia Coli in Water by the Two-Step Membrane Filter Procedure
ASTM D5392-19 Standard Test Method for Isolation and Enumeration of Escherichia coli in Water by the Two-Step Membrane Filter Procedure
ASTM C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer

IT-UNI

UNI 6809-1972 Statistical methods for quality inspection. Compare the dispersion between two series by comparing the variability

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.1.450-1975 Analysis of Deionized Water for Volume Resistivity

Japanese Industrial Standards Committee (JISC)

JIS B 7509:1974 Dial gauges reading in 0.001 mm
JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6854-2:1999 Adhesives -- Determination of peel strength of bonded assemblies -- Part 2: 180 degree SIGN peel
JIS K 6854-1:1999 Adhesives -- Determination of peel strength of bonded assemblies -- Part 1: 90 degree SIGN peel

Danish Standards Foundation

DS/EN 1121:2001 Doors - Behaviour between two different climates - Test method
DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Lithuanian Standards Office

LST EN 1121-2002 Doors - Behaviour between two different climates - Test method

VDE - VDE Verlag GmbH@ Berlin@ Germany

FNN SPITZENKAPPUNG-2017 Spitzenkappung - Ein neuer planerischer Freiheitsgrad - Moeglichkeiten zur Beruecksichtigung der Spitzenkappung bei der Netzplanung in Verteilnetzen

AGMA - American Gear Manufacturers Association

P149.03-1983 Prediction of the Peak Temperature on the Surface of Thermoplastic Gear Teeth

US-FCR

FCR COE CERC-91-7 FINAL REPORT-1991 WAVE HEIGHT DISTRIBUTIONS IN MULTIPLE-PEAKED SEAS

International Organization for Standardization (ISO)

ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 8421-6:1987 Fire protection; Vocabulary; Part 6 : Evacuation and means of escape Bilingual edition

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4758-2005 Comparison of Two Models for Particle Separation in a Vane-Induced Uniflow Cyclone

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength

Standard Association of Australia （SAA）

AS 2512.8:1988 Methods of testing protective helmets, Part 8: Measurement of peak deflection

YU-JUS

JUS G.S2.152-1985 Rubber and plastics. Analysis of multi-peak traces obtained in determination of tear strength and adhesion strength
JUS U.N1.052-1982 Concrete pipes for sevverage length over 1 m. Centrifugal tubes. Technical reguirements

CZ-CSN

CSN 11 3026-1981 Centrifuga] radial spiral one-stage pumpa with two water entries
CSN 25 4345-1961 Screw gauges. Limit thread rings "go" side. V-thread (angle between flanks=80 grads)

RO-ASRO

STAS 5841-1967 Isolation material mainly made of mineral wool. Test and Analytical Methods

European Telecommunications Standards Institute (ETSI)

ETSI TR 102 279-2004 Human Factors (HF); Two surveys on assistive technology

South African Bureau of Standard

SANS 16133:2003 Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4835-2006 Mass Generation Rates of Ammonia@ Moisture@ and Heat Production in Nouse Cages with Two Bedding Types@ Two Mouse Strains and Two Room Relative Humidities

AR-IRAM

IRAM 2052-1953 Plug for heating appliance. Two-pole non-socket, rated voltage is 220 volts

Natural Gas Processor's Association (NGPA)

GPA RR-57-1982 Phase Behavior of Two Mixtures of Methane, Carbon Dioxide, Hydrogen Sulfide, and Water

Others: The separation of the two peaks is,Separation of two peaks,Resolution between two peaks,How to calculate the separation between two peaks