Thermoplastic sheet joint strength

Thermoplastic sheet joint strength, Total:266 items.

The international standard classification for "Thermoplastic sheet joint strength" includes: Bolts, screws, studs , Reinforced plastics , Flat steel products and semi-products , Rubber , Chain drives and their components , Plastics pipes, fittings and valves , Plastics in general , Aluminium products .

The Chinese standard classification for "Thermoplastic sheet joint strength" includes: Basic standards and general methods , Fibre reinforced composites , Steel sheet and strip , Rubber products in general , Chain drive, belt drive and key joint , Plastic profile , Basic standards and general methods for synthetic resin and plastic , Light metals and their alloys .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9647-2015 Thermoplastics pipes―Determination of ring stiffness
GB/T 20887.2-2010e Continuously hot rolled high strength steel sheet and strip for automobile—Part 2:High hole expansion steel
GB/T 20887.1-2007 Continuously hot rolled high strength steel sheet and strip for automobile—Part 1:High yield strength steel for cold forming
GB/T 20887.3-2010 Continuously hot rolled high strength steel sheet and strip for automobile—Part 3:Dual phase steel
GB/T 11211-2009 Rubber vulcanized or thermoplastic - Determination of adhesion to metal - Two - Plate method
GB/T 20887.4-2010(英文版) Continuously hot rolled high strength steel sheet and strip for automobile—Part 4:Transformation induced plasticity steel
GB/T 6074-2006 Leaf chains clevises and sheaves - Dimensions measuring forces and tensile strengths
GB/T 11211-2009 Rubber vulcanized or thermoplastic - Determination of adhesion to metal - Two - Plate method
GB/T 18252-2008 Plastics piping and ducting systems - Determination of the long - term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
GB/T 7559-2005 method for bearing strength by bolted joints of fiber reinforced plastics laminates
GB/T 7760-2003 Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method
GB/T 18252-2000 Plastics piping and ducting systems--Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
GB/T 20887.3-2010e Continuously hot rolled high strength steel sheet and strip for automobile—Part 3:Dual phase steel
GB/T 11211-2009 Rubber vulcanized or thermoplastic - Determination of adhesion to metal - Two - Plate method
GB/T 20887.4-2010e Continuously hot rolled high strength steel sheet and strip for automobile—Part 4:Transformation induced plasticity steel
GB/T 20887.1-2017(英文版) Continuously hot rolled high strength steel sheet and strip for automobile—Part 1:High yield strength steel for cold forming
GB/T 20887.5-2010e Continuously hot rolled high strength steel sheet and strip for automobile—Part 5:Martensitic steel
GB/T 7559-1987 FRP Laminates-test method for bearing strength by bolted joints
GB/T 20887.4-2010 Continuously hot rolled high strength steel sheet and strip for automobile—Part 4:Transformation induced plasticity steel
GB/T 1634.3-2004 Plastics—Determination of temperature of deflection under load—Part 3:High-strength thermosetting laminates

Group Standards of the People's Republic of China

T/CISA 332-2023 Continuously hot rolled high strength steel sheet and strip with wear resistant
T/QGCML 1016-2023 Wiring harness high strength connecting wire
T/QGCML 1616-2023 High strength and deformation resistant wood plastic flooring
T/SSEA 0328-2023 Preheat-free welding of high-strength steel plates for coal mine hydraulic supports
T/SSEA 0367-2024 High-strength hot-rolled steel plate for aerial work lifting platforms
T/CSTA 0081-2024 High-strength hot-rolled steel plates for aerial work platforms

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 18252-2020 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
GB/T 20887.3-2022 Continuously hot rolled high strength steel sheet and strip for automobile—Part 3: Dual phase steel
GB/T 38725.2-2020 Spoolable reinforced plastic pipe—Part 2:Fiber reinforced thermoplastic coiled pipe
GB/T 18743.2-2022 Thermoplastics pipes—Determination of pendulum impact strength by the Charpy method—Part 2: Test condition for pipes of various materials
GB/T 20887.4-2022 Continuously hot rolled high strength steel sheet and strip for automobile—Part 4: Transformation induced plasticity steel

未注明发布机构

DIN 4724 E:2020-05 Plastic piping systems for warm water floor heating systems and radiator pipe connecting - Crosslinked polyethylene of medium density (PE-MDX)
ASTM RR-D01-1155 2010 D4796-Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
DIN EN 17869 E:2022-08 Hardware for furniture - Test methods for strength and overload tests of connectors for furniture constructed from panel material

Taiwan Provincial Standard of the People's Republic of China

CNS 8913-1982 Glassfiber Reinforced Plastic Bathtubs Connected with Floor

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 20887.1-2017 Continuously hot rolled high strength steel sheet and strip for automobile--Part 1: High yield strength steel for cold forming
GB/T 20887.6-2017 Continuously hot rolled high strength steel sheet and strip for automobile--Part 6: Complex phase steel

Professional Standard - Aviation

HB/Z 215-1992 Equivalent values of hardness and strength of aluminum alloy plate materials
HB 7070-1994 Test method for extrusion strength of fiber reinforced plastic laminates

Professional Standard - Chemical Industry

HG/T 3045-1989(1997) Hose of polymer reinforced thermoplastics for suction and discharge

Society of Automotive Engineers (SAE)

SAE J1442-1988 HIGH-STRENGTH, HOT-ROLLED STEEL PLATES, BAR AND SHAPES
SAE J1392-2008 Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and Coated Sheet
SAE AMS3601D-2004 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601D-1992 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS6386C-2000 Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield Strength
SAE AMS3601E-2011 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3602-2002 Plastic Sheet and Plate, Electrical and Heat Resistant Glass Fabric Reinforced Melamine-Formaldehyde
SAE AMS3590A-1958 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenol-Formaldehyde
SAE AMS3590-1956 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenol-Formaldehyde
SAE AMS3590C-1991 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenolic Resin
SAE AMS3607C-1964 PLASTIC SHEET AND PLATE Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3607A-1953 PLASTIC SHEET AND PLATE Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3590B-1978 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenolic Resin
SAE AMS3607B-1963 PLASTIC SHEET AND PLATE Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3590D-1992 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenolic Resin
SAE AMS3607-1948 PLASTIC SHEET AND PLATE Cotton Fabric Reinforced Phenol-Formaldehyde

Association Francaise de Normalisation

NF ISO 24334:2023 Laminate flooring - Determination of tensile strength of mechanically joined boards
NF EN 12228:2013 Sports floors - Determination of joint strength
NF EN ISO 75-3:2005 Plastics - Determination of deflection temperature under load - Part 3: high strength thermosetting laminates and long fiber reinforced plastics
NF T51-005-3*NF EN ISO 75-3:2005 Plastics - Determination of temperature of deflection under load - Part 3 : high-strength thermosetting laminates and long-fibre-reinforced plastics
NF P84-126-2*NF EN 12317-2:2010 Flexible sheets for waterproofing - Determination of the shear resistance of joints - Part 2 : plastic and rubber sheets for roof waterproofing.
NF T54-084*NF EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method
NF T54-123:1987 Plastics - Sheets - Determination of bursting resistance
NF T51-005-3:1996 Plastics. Determination of temperature of deflection under load. Part 3 : high-strength thermosetting laminates and long-fibre reinforced plastics.
NF T54-925:1999 Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of ů seam.

British Standards Institution (BSI)

BS EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - High-strength thermosetting laminates and long-fibre-reinforced plastics
BS 2782-1 Methods 131C and 131D:1978 Methods of testing plastics - Thermal properties - Crushing strength after heating (heat resistance) of thermosetting moulding material - Crushing strength after heating (heat resistance) of thermosetting laminated sheet or mouldings
BS EN 17869:2023 Hardware for furniture. Test methods for strength and overload tests of connectors for furniture constructed from panel material
BS EN 12317-2:2010 Flexible sheets for waterproofing - Determination of shear resistance of joints - Plastic and rubber sheets for roof waterproofing
BS 89100:2017 Plastics. Joining of thermoplastic moulded components. Specification of variables for thermal joining processes
BS ISO 23512:2021 Plastics. Joining of thermoplastic moulded components. Specification of variables for thermal joining processes
BS 89100:2018 Plastics — Joining of thermoplastic moulded components — Specification of variables for thermal joining processes
22/30449497 DC BS EN 17869. Hardware for furniture. Test method for strength and overload tests of connectors for furniture constructed from panel material
BS EN 10292:2000 Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions
BS EN ISO 75-3:2004(2006) Plastics — Determination of temperature of deflection under load — Part 3 : High - strength thermosetting laminates and long - fibre - reinforced plastics
20/30400647 DC BS ISO 23512. Plastics. Joining of thermoplastic moulded components. Specification of variables for thermal joining processes
BS ISO 15211:2022 Steel sheet, twin-roll cast, zinc-coated by the continuous hot-dip process, of structural quality and high strength
BS EN 28659:1992 Thermoplastics valves - Fatigue strength - Test method
BS EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Designation
BS EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Specific requirements
BS EN ISO 8659:2020 Thermoplastics valves. Fatigue strength. Test method
24/30464423 DC BS EN ISO 75-3 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
BS EN 14598-1:2005 Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Designation
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
BS ISO 19821:2017(2019) Determination of span rating for natural fibre - reinforced plastic composite (NFC) deck boards
BS EN 12107:1998 Plastics Piping Systems - Injection-Moulded Thermoplastics Fittings, Valves and Ancillary Equipment - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials for Injection Moulding of Piping Components
BS ISO 20975-1:2023 Fibre-reinforced plastic composites. Determination of laminate of through-thickness properties - Direct tension and compression tests
BS ISO 19821:2017 Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards

IT-UNI

UNI 4818-P27-1977 Bracket covered with plastic material. experiment method. Hot plate strength measurement
UNI 4291-1972 Plastic material testing. Hot hard materials. Industrial frequency medium strength measurement
UNI 7382-1975 Hot rolled special flat steel. Steel plates and strips with thickness ≥3mm for high tension welded structures

SAE - SAE International

SAE J1392-2017 Steel@ High Strength@ Hot Rolled Sheet and Strip@ Cold Rolled Sheet@ and Coated Sheet
SAE J1392-1982 Steel@ High Strength@ Hot Rolled Sheet and Strip@ Cold Rolled Sheet@ and Coated Sheet
SAE J1392-1984 Steel@ High Strength@ Hot Rolled Sheet and Strip@ Cold Rolled Sheet@ and Coated Sheet
SAE J1392-2001 (R) Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and Coated Sheet [Superseded: SAE J410]
SAE AMS3590E-1995 PLASTIC SHEET@ COPPER FACED PAPER REINFORCED PHENOLIC RESIN

SCC

HOLDEN HN 1743-2009 STEEL - HOT ROLLED HIGH STRENGTH LOW ALLOY SHEET
HOLDEN HN 1463-2009 STEEL - HOT ROLLED HIGH STRENGTH LOW ALLOY SHEET
BS 5955-7:1983 Plastics pipework (thermoplastics materials)-Recommendations for methods of thermal fusion jointing
BS EN ISO 75-3:1996 Plastics. Determination of temperature of deflection under load-High-strength thermosetting laminates and long-fibre-reinforced plastics
DANSK DS/EN 17869:2023 Hardware for furniture – Test methods for strength and overload tests of connectors for furniture constructed from panel material
NS-EN 17869:2023 Hardware for furniture - Test methods for strength and overload tests of connectors for furniture constructed from panel material
MIL MIL-P-13326D-1987 PLATE, METAL, STEEL ALLOY; HEAT TREATED, HIGH STRENGTH; FOR WELDED STRUCTURES (SUPERSEDING MIL-P-13326C)
DANSK DS/ISO 15853:2000 Thermoplastics materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
MIL MIL-PRF-5425E-1998 PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT
DANSK DS/EN ISO 75-3/AC:2006 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
DANSK DS/ISO 8659:2020 Thermoplastics valves – Fatigue strength – Test method
HOLDEN HN 1858-2012 Reinforced Thermoplastic Pet Polyester Compounds
DANSK DS/EN ISO 8659:2020 Thermoplastics valves – Fatigue strength – Test method
DANSK DS/EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates
HOLDEN HN 1858-2001 Reinforced Thermoplastic Pet Polyester Compounds
BS 1449-1-1.10:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip-Specification for hot rolled narrow strip based on specified minimum strength
AENOR UNE-EN 514:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints
HOLDEN HN 1085-2003 HOT ROLLED PICKLED AND OILED MEDIUM STRENGTH SHEET STEEL
BS 1449-1-1.4:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip-Specification for hot rolled wide material based on specified minimum strength
VDI 2736 BLATT 4-2016 Thermoplastic gear wheels — Determination of strength parameters on gears
NS-EN ISO 75-3:1996 Plastics — Determination of temperature of deflection under load — Part 3: High-strenght thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993)
AENOR UNE-EN ISO 75-3:2005 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics. (ISO 75-3:2004)

ES-UNE

UNE-EN 17869:2023 Hardware for furniture - Test methods for strength and overload tests of connectors for furniture constructed from panel material
UNE-EN ISO 8659:2021 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
UNE-EN 514:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints

European Committee for Standardization (CEN)

EN 17869:2023 Hardware for furniture - Test methods for strength and overload tests of connectors for furniture constructed from panel material
EN 1119:1996 Plastics Piping Systems - Joints for Glass- Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Methods for Leaktightness and Resistance to Damage of Flexible and Reduced- Articulation Joints
prEN ISO 75-3 rev Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
EN ISO 75-3:1996 Plastics - Determination of Temperature of Deflection under Load - Part 3: High-Strength Thermosetting Laminates and Long-Fibre- Reinforced Plastics (ISO 75-3 : 1993)
EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
EN 12107:1997 Plastics Piping Systems - Injection-Moulded Thermoplastics Fittings, Valves and Ancillary Equipment - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials for Injection Moulding of Piping Components

German Institute for Standardization

DIN EN 17869:2023 Hardware for furniture - Test methods for strength and overload tests of connectors for furniture constructed from panel material
DIN 4726:2000 Warm water floor heating systems and radiator pipe connecting - Piping of plastic materials
DIN EN 514:2000 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corner and T-joint; German version EN 514:2000
DIN 53366:2007-10 Testing of plastic films and sheetings - Determination of blocking strength
DIN EN 17869:2023-05 Hardware for furniture - Test methods for strength and overload tests of connectors for furniture constructed from panel material; German version EN 17869:2023
DIN EN 13494:2003 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material; German version EN 13494:2002
DIN EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004); German version EN ISO 75-3:2004
DIN EN 1979:1999 Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999
DIN EN ISO 75-3:2004-09 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004); German version EN ISO 75-3:2004
DIN 4724:2001 Plastic piping systems for warm water floor heating systems and radiator pipe connecting - Crosslinked polyethylene of medium density (PE-MDX)
DIN EN ISO 2759:2014-10 Board - Determination of bursting strength (ISO 2759:2014); German version EN ISO 2759:2014
DIN 65672:2009-07 Aerospace - Continuous filament fibre reinforced laminates with non-reactive thermoplastics - Preparation of test panels; Text in German and English
DIN EN ISO 8659:2020-07 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020); German version EN ISO 8659:2020
DIN EN 514:2018-04 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints; German version EN 514:2018

Japanese Industrial Standards Committee (JISC)

JIS A 5712:1994 Glass fiber reinforced plastic bathtubs connected with floor
JIS K 7191-3:2007 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
JIS G 3134:2018 Hot-rolled high strength steel plates, sheet and strip with improved formability for automobile uses
JIS G 3134:2006 Hot-rolled high strength steel plate, sheet and strip with improved formability for automobile structural uses
JIS D 5202:1998 Automotive parts -- Distributors and ignition coils -- High-tension connections and low-tension connections

Association of German Mechanical Engineers

DVS 2203-1 Beiblatt 1-2003 Testing of welded joints of thermoplastics sheet and pipes - Requirements - Tensile test
DVS 2203-1-2003 Testing of welded joints of thermoplastics sheet and pipes - Test methods - Requirements
DVS 2203-5-1999 Testing of welded joints ofthermoplastics plates and tubes - Technological bend test
DVS 2203-4-1997 Testing of welded joints of thermoplastics plates and tubes - Tensible creep test
DVS 2203-1 Beiblatt 3-2003 Testing of welded joints of thermoplastics sheet and pipes - Requirements - Technological bend test; Bend angle/ram displacement
DVS 2207-4 Beiblatt-1991 Welding of thermoplastics; extrusion welding; welding parameters for sheets and pipes PE-HD and PP
DVS 2207-4 Beiblatt 1-2006 Welding parameters for extrusion welding of welded pipes, fittings and panels of thermoplastics
DVS 2207-4 Beiblatt 1-2003 Welding parameters for extrusion welding of welded pipes, fittings and panels of thermoplastics
DVS 2207-4 Beiblatt 1-2005 Welding parameters for extrusion welding of welded pipes, fittings and panels of thermoplastics
DVS 2203-4 Beiblatt 1-2001 Testing of welded joints of thermoplastic sheets and pipes - Tensile creep test - Testing of socket joints
DVS 2207-11-1999 "Welding of thermoplastics - Heated tool welding of pipes, pipeline, components and sheets out of PP"
DVS 2207-1-2014 "Welding of thermoplastics - Heated tool welding of pipes, pipeline components and sheets made of PE"
DVS 2208-1-1997 "Welding of thermoplastics - Machines and devices for the heated tool welding of pipes, pipeline components and sheets"
DVS 2207-1-2005 "Welding of thermoplastics - Heated tool welding of pipes, pipeline components and sheets made of PE-HD"
DVS 2207-1-1995 "Welding of thermoplastics - Heated tool welding of pipes, pipeline, components and sheets made from PE-HD"
DVS 2207-3 Beiblatt 1-2003 Hot gas drawing and hot gas panel welding welding parameters for welded pipes, fittings and panels of thermoplastics
DVS 2207-3 Beiblatt 1-2005 Hot gas drawing and hot gas panel welding welding parameters for welded pipes, fittings and panels of thermoplastics
DVS 2207-4-1991 Welding of thermoplastics; extrusion welding; panels and tubes
DVS 2215-1-1999 Hot plate welding of mouldings made from thermoplastics in volume production
DVS 2207-4-1993 Welding of thermoplastics - Extrusion welding - Panels and pipes

Korean Agency for Technology and Standards (KATS)

KS D 3616-2002(2012) HOT ROLLED HIGH STRENGTH STEEL SHEETS WITH IMPROVED FORMABILITY FOR AUTOMOBILE STRUCTURAL USES
KS D 3611-2002 High yield strength steel plates for welded structure
KS M ISO 75-3-2013(2018) Plastics — Determination of temperature of deflection under load–Part 3: High-strength thermosetting laminate and long-fiber-reinforced plastics
KS M ISO 75-3:2008 Plastics-Determination of temperature of deflection under load-Part 3:High-strength thermosetting laminates and long-fibre-reinforced plastics
KS M ISO 75-3:2013 Plastics — Determination of temperature of deflection under load–Part 3: High-strength thermosetting laminate and long-fiber-reinforced plastics
KS M ISO 75-3-2023 Plastics — Determination of temperature of deflection under load–Part 3: High-strength thermosetting laminate and long-fiber-reinforced plastics
KS M ISO 9080:2015 Plastics piping and ducting systems — Determination of the longlongterm hydrostatic strength of thermoplastics materials in pipe form by extrapolation
KS M ISO 9080:2020 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
KS M 3370-2011 Plastics piping systems for pressure and non-pressure water supply-Glass reinforced thermosetting plastics(GRP) systems based on unsaturated polyester(UP) resin
KS M 3370-2015 Plastics piping systems for water supply — Glass reinforced thermosetting plastics(GRP) based on unsaturated polyester(UP) resin — Pressure and non-pressure piping system
KS M 3370-2013 Plastics piping systems for pressure and non-pressure water supply ?; Glass reinforced thermosetting plastics(GRP) systems based on unsaturated polyester(UP) resin

International Federation of Trucks and Engines

NAVISTAR TMS 7002-1981 VOID - Thermoplastic Sheet

CZ-CSN

CSN 49 0172-1966 Determination of tensile strength of a glue joint perpendicularly to the plane of a panel
CSN 77 0312-1982 Testing of the influence of fluid fillings on the weld strength of thermoplastic and combined packaging materials
CSN 79 5612-1968 Shoe component connection strength test
CSN 69 0052-1984 Flange connections alculation of strength
CSN 64 0626-1989 Plastics. Determination of tensile trenght of thermoplastics pipes on n annular test piece

Danish Standards Foundation

DS/EN 12317-2:2010 Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
DS/ISO 15853:2000 Thermoplastics materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
DS/EN ISO 75-3/AC:2006 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

AENOR

UNE-EN 12317-2:2011 Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing

Lithuanian Standards Office

LST EN 12317-2-2010 Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
LST EN ISO 75-3:2004/AC:2006 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)

RU-GOST R

GOST R 55142-2012 Testing of welded joints of thermoplastic sheets and pipes. Test methods-Requirements
GOST R 56790-2015 Polymer composites. Method for determination of bearing strength and bypass strength of laminates connected to one another by two bolts
GOST 33372-2015 Polymer composites. Production of reinforced thermoplastic plates by moulding for preparation of test specimens

American National Standards Institute （ANSI)

ANSI/AWWA D121-2012 Bolted Aboveground Thermosetting Fiberglass-Reinforced Plastic Panel-Type Tanks for Water Storage
ANSI/ASTM D6338:1998 Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs)
ANSI/AWWA D121a-2014 Addendum to D121-12, Bolted Aboveground Thermosetting Fiberglass-Reinforced Plastic Panel-Type Tanks For Water Storage
ANSI/EIA 364-79:1998 Insert Bond Strength Test Procedure for Electrical Connectors

TH-TISI

TIS 1884-1999 Hot.rolled high strength steel coil strip plate and sheet with improved formability for automobile structural uses

International Organization for Standardization (ISO)

ISO/CD 75-3 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 75:1974 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 75-1:2020 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 23512:2021 Plastics - Joining of thermoplastic moulded components - Specification of variables for thermal joining processes
ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 75-3:1993 Plastics; determination of temperature of deflection under load; part 3: high-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 8639:2000 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness of flexible joints
ISO 8639:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
ISO 15211:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
ISO 7349:1983 Thermoplastics valves; Connection references
ISO/TR 9080:1992 Thermoplastics pipes for the transport of fluids; methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
ISO 15853:1999 Thermoplastic materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
ISO 8659:1989 Thermoplastics valves; fatigue strength; test method
ISO 8659:2020 Thermoplastics valves — Fatigue strength — Test method
ISO 8521:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs

GOST

GOST R 56790-2023 Polymer composites. Methods for determination of bearing strength and transfer strength (bypass strength) of laminates connected by two bolts

KR-KS

KS M ISO 75-3-2013(2023) Plastics — Determination of temperature of deflection under load–Part 3: High-strength thermosetting laminate and long-fiber-reinforced plastics
KS M ISO 9080-2020 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

American Society for Testing and Materials (ASTM)

ASTM D4796-88(2004) Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM C582-09 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
ASTM D4796-88(1998) Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM E767-96 Standard Test Method for Shear Strength Properties of Metal Connector Plates
ASTM D1004-07 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D4796-17 Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM D4796-17(2022) Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM D952-95 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D4796-10 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM A1011/A1011M-10 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM D952-02 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM A1018/A1018M-16 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A635/A635M-08 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A635/A635M-02 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements
ASTM A635/A635M-22 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General
ASTM A635/A635M-14 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A635/A635M-00 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements
ASTM A635/A635M-09 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A635/A635M-15 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM D4703-10 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM A635/A635M-09a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM C1147-14 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
ASTM A1011/A1011M-15 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-17a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-12b Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-12a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

GSO

GSO ISO 13263:2013 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength
GSO ISO 15211:2015 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
OS GSO ISO 75-3:2015 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
OS GSO ISO 15211:2015 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
BH GSO ISO 15211:2017 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
GSO ISO 75-3:2015 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
OS GSO ISO 8659:2013 Thermoplastics valves - Fatigue strength - Test method
BH GSO ISO 8659:2016 Thermoplastics valves - Fatigue strength - Test method
GSO ISO 15853:2008 Thermoplastics materials – Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding

SE-SIS

SIS SS 27 02 32-1984 Building boards - Determination of water, frost and heat influence on thickness and strength

IPC - Association Connecting Electronics Industries

IPC TM-650 3.3A-1975 Crimp Tensile Strength@ Connectors

YU-JUS

JUS G.S2.617-1988 Plastics. Determination of Izod impact strength of rigid materials

SG-SPRING SG

SS 323 Pt.F1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F1 : Determination Of Heat Seal Strength

WRC - Welding Research Council

BULLETIN 79-1962 WELDING ULTRA HIGH STRENGTH STEEL SHEET

American Welding Society (AWS)

WRC 079:1962 Welding Ultra High Strength Steel Sheet

RO-ASRO

STAS SR ISO 10287:1995 Steel for reinforcement of concrete. Determination of strenght of joints in welded fabric

BE-NBN

NBN-EN 28659-1992 Thermoplastic valves - Fatigue strength - Test method

DE-VDA

VDA 235-204-2009 VDA Material Sheet - High Strength Connecting Components for the Automotive Industry

FI-SFS

SFS 3141-1975 plastic pipe. Connecting pipe heating test

Standard Association of Australia （SAA）

AS/NZS 3572.24:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial hoop tensile strength by means of a tensile plate test
AS/NZS 3572.23:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial longitudinal tensile strength by means of a tensile plate test

NZ-SNZ

AS/NZS 3572.19:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 19: Method for the Determination of the Lap Shear Strength of Laminate

HU-MSZT

MNOSZ 701-1951 Bearing inner bushings made of lead plate material, connecting bearings and connecting plates

Others: