Copper terminal equipment

Copper terminal equipment, Total:265 items.

The international standard classification for "Copper terminal equipment" includes: Connecting devices , Electrical and electromechanical components , Electrical engineering in general .

The Chinese standard classification for "Copper terminal equipment" includes: Low voltage apparatus in general , Cable and its accessory , Hygiene, safety and labor protection , Electronic components .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14048.22-2022 Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors
GB 14048.8-1998 Low-voltage switchgear and controlgear Ancillary equipment Section 2:Protective conductor terminal blocks for copper conductors
GB/T 14048.7-2016 Low-voltage switchgear and controlgear--Part 7-1:Ancillary equipment--Terminal blocks for copper conductors
GB/T 14048.8-2016 Low-voltage switchgear and controlgear―Part 7-2:Ancillary equipment―Protective conductor terminal blocks for copper conductors
GB/T 14315-1993 Compression type terminal lugs and ferrules for power cables with copper or aluminium conductors
GB/T 14048.8-2006 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
GB/T 4026-1992 Identification of electric equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system
GB/T 14315-2008 Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors
GB/T 14048.7-2006 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
GB 14048.7-1998 Low-voltage switchgear and controlgear Ancillary equipment Section 1:Terminal blocks for copper conductors

Professional Standard - Coal

MT/T 412-1995 Flameproof electric apparatus low-voltage terminal

未注明发布机构

UL 486E-2024 UL Standard for Safety Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
CSA C22.2 No.158-2023 Terminal blocks

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 14048.22-2017 Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors

Taiwan Provincial Standard of the People's Republic of China

CNS 3434-1990 Crimp-Type Terminal Lugs Copper Conductors

Professional Standard - Machinery

JB/T 2436.1-1992 Copper crimping terminal for conductor Part 1: Copper crimping terminal for 0. 5~0. 6mm2 conductor
JB/T 2436.2-1994 ~Copper compression terminals for conductors——Part 2:Copper compression terminals for 10mm2～300mm2 conductors
JB/T 9659.1-1999 Terminal Blocks for Low-oltage Switchgear and Controlgear Assemblies.Part 1: Sectional Type and Closed - Back Type Terminal Blocks
JB/T 11525-2013 Aluminium Connection Pipe with Copper Ends for Air Conditioning and Refrigeration

Professional Standard - Aviation

HB 6676-1992 General Specification for Copper Crimp Terminal and Joint of Aircraft Wire
HB 6675-1992 General requirements for crimping of copper terminals and splices and wires

Group Standards of the People's Republic of China

T/YIIEE 08-2021 Connection terminals
T/ZZB 1755-2020 Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors

工业和信息化部

JB/T 2436.1-2020 Copper compression termimals for conductors - Part 1: Copper compression terminals for 0.5 mm2 ~6.0 mm2 conductors
JB/T 2436.2-2020 Copper compression termimals for conductors- Part 2: Copper compression terminals for 10 mm2 ~ 300 mm2 conductors

未注明发布机构

CSA C22.2 No.158-2023 Terminal blocks
UL 486E-2024 UL Standard for Safety Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors

Standard Association of Australia （SAA）

AS/NZS IEC 60947.7.1:2015 Low-voltage switchgear and control equipment auxiliary equipment copper conductor terminal blocks
AS/NZS IEC 60947.7.4:2015 PCB terminal blocks for copper conductors of low-voltage switchgear and controlgear auxiliary equipment
AS/NZS 3947.7.1:2001 Low-voltage switchgear and controlgear Part 7.1:Ancillary equipment--Terminal blocks for copper conductors
AS/NZS IEC 60947.7.2:2015 Protective conductor terminal blocks for copper conductors in auxiliary equipment for low-voltage switchgear and control equipment
AS 3947.7.2:1996 Low-voltage switchgear and controlgear Part 7.2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
AS 60947.7.1:2004 Low-voltage switchgear and controlgear - Ancillary equipment - Terminal blocks for copper conductors
AS/NZS IEC 60947.7.3:2015 Safety requirements for fuse terminal blocks of low-voltage switchgear and control equipment auxiliary equipment

United States Navy

NAVY MS18029 REV E-1971 COVER ASSEMBLY, ELECTRICAL, FOR MS27212 TERMINAL BOARD ASSEMBLY
NAVY QPL-AS7928-2013 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
NAVY QPL-AS7928-2 NOTICE 1-2009 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification for
NAVY QPL-AS7928-2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR

SCC

BS EN 60947-7-1:1992 Specification for low-voltage switchgear and controlgear. Ancillary equipment-Terminal blocks for copper conductors
AS 3947.7.1:1996 Low-voltage switchgear and controlgear, Part 7.1: Ancillary equipment - Terminal blocks for copper conductors
AENOR UNE-EN 60947-7-1:2010 Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
CAN/CSA-C22.2 No.60947-7-1-2017 Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors
CEI EN 60947-7-1:2010 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
DANSK DS/EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
UNE-EN 60947-7-1:2003 Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment - Terminal blocks for copper conductors.
AENOR UNE-EN 60947-7-4:2014 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
CEI EN 60947-7-4:2014 Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
BS EN 60947-7-2:1996 Specification for low-voltage switchgear and controlgear. Ancillary equipment-Protective conductor terminal blocks for copper conductors
CAN/CSA-C22.2 No.60947-7-4-2018 Low-voltage switchgear and controlgear — Part 7-4: Ancillary equipment — PCB terminal blocks for copper conductors
CEI EN IEC 60947-7-4:2019 Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
IEC 60947-7-1:1989+AMD1:1999 CSV Low-voltage switchgear and controlgear - Part 7: Ancillary equipment - Section 1: Terminal blocks for copper conductors
DANSK DS/EN IEC 60947-7-4:2019 Low-voltage switchgear and controlgear – Part 7-4: Ancillary equipment – PCB terminal blocks for copper conductors
IEC 60947-7-1:2002/COR1:2003 Corrigendum 1 - Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
UNE-EN 60947-7-2:2003 Low-voltage switchgear and controlgear -- Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
DANSK DS/EN 60947-7-4:2013 Low-voltage switchgear and controlgear – Part 7-4: Ancillary equipment – PCB terminal blocks for copper conductors
AENOR UNE-EN 60947-7-2:2010 Low-voltage switchgear and controlgear — Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
CAN/CSA-C22.2 No.60947-7-2-2017 Low-voltage switchgear and controlgear — Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors
IEC 60947-7-1:1989/AMD1:1999 Amendment 1 - Low-voltage switchgear and controlgear. Part 7: Ancillary equipment - Section One: Terminal blocks for copper conductors
DIN EN 60947-7-1/A1 E:2007 Draft Document - Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (IEC 17B/1567/CDV:2007); German version EN 60947-7-1:2002/prA1:2007
BS PD IEC TS 60947-7-5:2021 Low-voltage switchgear and controlgear-Ancillary equipment. Terminal blocks for aluminium conductors
UL Subject 486E-2017 Standard for Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors (CSDS Proposal, 4/19/2017)
UNE-EN 61210:1996 CONNECTING DEVICES. FLAT QUICK-CONNECT TERMINATIONS FOR ELECTRICAL COPPER CONDUCTORS. SAFETY REQUIREMENTS.
BS EN 61210:1995 Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
11/30206085 DC BS EN 60947-7-4. Low-voltage switchgear and controlgear. Part 7-4. Ancillary equipment. Printed board terminal blocks for copper conductors
CSA C22.2 No.158-1987(C2009) Terminal blocks
DIN EN 60947-7-4 E:2018 Draft Document - Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors (IEC 121A/176/CDV:2017); German and English version prEN 60947-7-4:2017
CSA C22.2 No.158-1987(R2004) Terminal Blocks
CSA C22.2 No.158-M1984-1984 Terminal Blocks
CSA C22.2 No.158-2010(R2019) Terminal blocks
UL 1059-2019 Terminal Blocks
CSA C22.2 No.158-1987(R2009) Terminal Blocks
BS G 204:1967 Specification for copper terminal ends for crimping to electric cables with copper conductors
MIL MIL-T-7928/7-1981 TERMINAL LUG & SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 DEG. C TOTAL CONDUCTOR TEMPERATURE (S/S BY SAE-AS7928/7)
DANSK DS/IEC TS 60947-7-5:2021 Low-voltage switchgear and controlgear – Part 7-5: Ancillary equipment – Terminal blocks for aluminium conductors
DIN EN IEC 60947-7-4:2019 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors (IEC 60947-7-4:2019); German version EN IEC 60947-7-4:2019
CAN/CSA C22.2 No.60947-7-1-2017(R2022) Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (Trinational standard with NMX-J-538/7-1-ANCE and UL 60947-7-1)

British Standards Institution (BSI)

BS EN 60947-7-4:2013 Low-voltage switchgear and controlgear. Ancillary equipment. PCB terminal blocks for copper conductors
BS EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1:Ancillary equipment - Terminal blocks for copper conductors
BS EN IEC 60947-7-4:2019 Low-voltage switchgear and controlgear. Ancillary equipment. PCB terminal blocks for copper conductors
BS EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2:Ancillary equipment - Protective conductor terminal blocks for copper conductors
22/30449982 DC BS EN 60947-7-1. Low-voltage switchgear and controlgear - Part 7-1. Ancillary equipment. Terminal blocks for copper conductors
23/30473799 DC BS EN IEC 60947-7-1. Low-voltage switchgear and controlgear - Part 7-1. Ancillary equipment. Terminal blocks for copper conductors
PD IEC TS 60947-7-5:2021 Low-voltage switchgear and controlgear. Ancillary equipment. Terminal blocks for aluminium conductors
24/30497417 DC BS EN IEC 60947-7-2 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks forcopper conductors

International Electrotechnical Commission (IEC)

IEC 60947-7-4:2013 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
IEC 61210:1993 Connecting devices; flat quick-connect terminations for electrical copper conductors; safety requirements

IT-UNI

UNI 3833-1957 Terminal blocks for copper cables and wires for ships, ring terminal blocks
UNI 3834-1957 Terminal blocks for copper cables and wires for ships, tubular terminal blocks
UNI 3830-1957 Terminal blocks for copper cables and wires for ships, tubular terminal blocks
UNI 3828-1957 Terminal blocks for copper cables and wires for ships, single fork type terminal blocks
UNI 3827-1957 Terminal blocks for copper cables and wires for ships, single ring terminal blocks
UNI 3829-1957 Terminal blocks for copper cables and wires for ships, angle bracket type terminal blocks
UNI 3831-1957 Terminal blocks for copper cables and wires for ships, stamped ring terminal blocks
UNI 4033-1958 Terminal boards for copper wires and cables used in ships. Terminal box for instrument and box wiring terminal board
UNI 3832-1957 Terminal blocks for copper cables and wires for ships, clamp-type terminal blocks with crimp caps
UNI 3837-1957 Terminal blocks for copper cables and wires for ships, crimp caps for clamp-type terminal blocks with crimp caps
UNI 4034-1958 Terminal boards for copper wires and cables used in ships. Terminal strips and connecting rods of composite elements
UNI 3836-1957 Terminal blocks for copper cables and wires for ships, fixtures for clamp-type terminal blocks with crimp caps
UNI 4030-1958 Terminal boards for copper wires and cables used in ships. Shell terminal block connections, slide bars and caps
UNI 4036-1958 Terminal boards for copper wires and cables used in ships. Fixtures for terminal blocks and composite elements
UNI 4044-1958 Terminal boards for copper wires and cables used in ships. Fixing device for crimp cap type heavy terminals
UNI 4043-1958 Terminal boards for copper wires and cables used in ships. Fixing device for cap type heavy terminals
UNI 4040-1958 Terminal boards for copper wires and cables used in ships. Fixing device for cylindrical terminals
UNI 3835-1957 Terminal blocks for copper cables and wires used in ships, cap type terminal blocks. Technical regulations for use on components and cable ends
UNI 4041-1958 Terminal boards for copper wires and cables used in ships. Fixing device for cylindrical heavy terminals
UNI 4037-1958 Terminal boards for copper wires and cables used in ships. Terminals, sheets, insulating tubes, brackets and strips for cable cores and terminal blocks for core cables
UNI 4042-1958 Terminal boards for copper wires and cables used in ships. Fixtures and caps for cap terminals
UNI 4038-1958 Terminal boards for copper wires and cables used in ships. Fixing device for double compression screw terminals
UNI 4031-1958 Terminal boards for copper wires and cables used in ships. Fixing device for shell-type terminal blocks with special connections
UNI 3826-1957 Terminal blocks for copper cables and wires for ships, list of common types

Korean Agency for Technology and Standards (KATS)

KS C 2620-2011(2021) Crimp-type terminal lugs for copper conductors
KS C IEC 60947-7-1:2014 Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors
KS C IEC 60947-7-1-2019 Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors
KS C 2620-2011(2016) Crimp-type terminal lugs for copper conductors
KS C 2620-2021 Crimp-type terminal lugs for copper conductors
KS C IEC 60947-7-2:2021 Low-voltage switchgear and controlgear —Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors
KS C 2620-1985 Crimp-type terminal lugs for copper conductors
KS C 2620-2011 Crimp-type terminal lugs for copper conductors
KS C IEC 60947-7-1-2014(2019) Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors
KS C IEC 61210-2014(2019) Connecting devices — Flat quick-connect terminations for electrical copper conductors — Safety requirements

Association Francaise de Normalisation

NF EN 60947-7-1:2009 Low voltage switchgear - Part 7-1: accessory materials - Terminal blocks for copper conductors
NF C63-001-7-4:2014 Low-voltage switchgear and controlgear - Part 7-4 : ancillary equipment - PCB terminal blocks for copper conductors
NF C93-022:1971 Components for electronic equipment. Point to point clip terminal.
NF C20-110:1970 Insulated terminals for copper conductors. Requirements.
NF EN IEC 60947-7-4:2019 Low voltage switchgear - Part 7-4: accessory materials - Terminal blocks for printed circuit boards for copper conductors
NF EN 60947-7-2:2009 Low voltage switchgear - Part 7-2: accessory equipment - Protective conductor terminal blocks for copper conductors
NF C63-060:1969 Low-voltage switchgear and controlgear for industrial use. Terminals for connection of copper conductors. Designation and specification.
NF C63-034:1982 Low-voltage switchgear and controlgear for industrial use. Terminal marking. Terminals for external associated electronic circuit components and contacts.
NF C93-024:1981 Electronic components. Insulation displacing terminations. Test specification for wires with copper or copper alloy conductor. General requirements.

GSO

GSO IEC 60947-7-1:2015 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
BH GSO IEC 60947-7-1:2016 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

AENOR

UNE-EN 60947-7-1:2010 Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
UNE-EN 60947-7-4:2014 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
UNE-EN 60947-7-2:2010 Low-voltage switchgear and controlgear -- Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

RU-GOST R

GOST IEC 60947-7-1-2016 Low-voltage switchgear and controlgear. Part 7-1. Ancillary equipment. Terminal blocks for cooper conductors
GOST IEC 60947-7-4-2015 Low-voltage switchgear and controlgear. Part 7-4. Ancillary equipment. PCB terminal blocks for copper conductors
GOST IEC 60947-7-2-2016 Low-voltage switchgear and controlgear. Part 7-2. Ancillary equipment. Protective conductor terminal blocks for copper conductors
GOST 31195.2.5-2012 Connecting devices for low voltage circuits for household and similar purposes. Part 2-5. Particular requirements for connecting boxes ( junction and/or tapping of copper conductors) for terminals of connecting devices
GOST IEC 61210-2011 Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements

ZA-SANS

SANS 60947-7-1:2009 Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
SANS 60947-7-2:2009 Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

Danish Standards Foundation

DS/EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
DS/EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

Defense Logistics Agency

DLA MIL-DTL-15659 J VALID NOTICE 1-2008 Terminal, Lug: Solder, Copper and Phosphor Bronze
DLA MIL-DTL-15659 J VALID NOTICE 2-2013 Terminal, Lug: Solder, Copper and Phosphor Bronze
DLA MS35430 REV C VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, One Hole
DLA MS35430 REV C VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, One Hole
DLA MS51536 REV C VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, Two Hole, 45 Degrees
DLA MS51535 REV C VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, Two Hole, 30 Degrees
DLA MS51536 REV C VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, Two Hole, 45 Degrees
DLA MS51535 REV C VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, Two Hole, 30 Degrees
DLA MS35440 REV B VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, Slotted
DLA MS35440 REV B VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, Slotted
DLA MIL-DTL-15659J SUPP 1-2003 TERMINAL, LUG: SOLDER, COPPER AND PHOSPHOR BRONZE [Use In Lieu Of: DLA MIL-T-0015659E]
DLA MS35431 REV H VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, One Hole, Flat
DLA MS35431 REV H VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, One Hole, Flat
DLA MS35436 REV C VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, One Hole
DLA MS35436 REV C VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, One Hole
DLA MS77068 REV B VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type, 45 Degrees, Two Hole
DLA MS77068 REV B VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type, 45 Degrees, Two Hole
DLA AN5539 REV 4 VALID NOTICE 2-2003 TERMINAL-THERMOCOUPLE, BRASS
DLA AN5539 REV 4-1993 TERMINAL-THERMOCOUPLE, BRASS
DLA MIL-DTL-15659 J-2003 TERMINAL, LUG: SOLDER, COPPER AND PHOSPHOR BRONZE

Underwriters Laboratories (UL)

UL 60947-7-2-2004 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 7-2: Ancillary Equipment Protective Conductor Terminal Blocks for Copper Conductors Second Edition
UL 60947-7-2-2021 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 7-2: Ancillary Equipment Protective Conductor Terminal Blocks for Copper Conductors
UL 486E-2019 UL Standard for Safety Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
UL 60947-7-1 BULLETIN-2004 UL Standard for Safety Low-Voltage Switchgear and Controlgear – Part 7-1: Ancillary Equipment – Terminal Blocks for Copper Conductors
UL 60947-7-1 (ND)-2017 National Differences For Low-voltage switchgear and controlgear – Part 7-1: Ancillary equipment – Terminal blocks for copper conductors (Fourth Edition)
UL 60947-7-1-2017 UL Standard for Safety Low-voltage switchgear and controlgear – Part 7-1: Ancillary equipment – Terminal blocks for copper conductors (Fourth Edition)
UL 60947-7-4 (ND)-2018 National Differences For Low-Voltage Switchgear and Controlgear – Part 7-4: Ancillary equipment – PCB terminal blocks for copper conductors (First Edition)
UL 60947-7-1 (ND)-2011 National Differences For UL 60947-7-1 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (Third Edition; Reprint with Revisions Through and Including October 14, 2011)
UL 60947-7-1 (ND)-2004 National Differences For UL 60947-7-1 Standard for Low-Voltage Switchgear And Controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (Second Edition)
UL 60947-7-2 BULLETIN-2004 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 7-2: Ancillary Equipment Protective Conductor Terminal Blocks for Copper Conductors
UL 60947-7-4-2018 UL Standard for Safety Low-Voltage Switchgear and Controlgear – Part 7-4: Ancillary equipment – PCB terminal blocks for copper conductors (First Edition)
UL 60947-7-2 (ND)-2017 National Differences For Low-Voltage Switchgear and Controlgear – Part 7-2: Ancillary Equipment – Protective Conductor Terminal Blocks for Copper Conductors (Fourth Edition)
UL 60947-7-2-2011 UL Standard for Safety Low-Voltage Switchgear and Controlgear – Part 7-2: Ancillary Equipment – Protective Conductor Terminal Blocks for Copper Conductors (Third Edition)
UL 60947-7-2-2017 UL Standard for Safety Low-Voltage Switchgear and Controlgear – Part 7-2: Ancillary Equipment – Protective Conductor Terminal Blocks for Copper Conductors (Fourth Edition)
UL 60947-7-2 (ND)-2011 National Differences For UL 60947-7-2 Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors (Third Edition; Reprint with Revisions Through and Including October 14, 2011)

ES-UNE

UNE-EN IEC 60947-7-4:2021 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors

American National Standards Institute （ANSI)

ANSI/UL 486E-2013 Standard for Safety for Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
ANSI/UL 60947-7-1-2011 Low-Voltage Switchgear and Controlgear - Part 7-1: Ancillary Equipment - Terminal Blocks for Copper Conductors
ANSI/UL 60947-7-2-2011 Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors
ANSI/UL 60947-7-1-2017 UL Standard for Safety Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (Fourth Edition)
ANSI/UL 60947-7-2-2017 UL Standard for Safety Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors (Fourth Edition)

CENELEC - European Committee for Electrotechnical Standardization

EN IEC 60947-7-4:2019 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors

European Committee for Electrotechnical Standardization（CENELEC）

EN 60947-7-4:2013 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors

Society of Automotive Engineers (SAE)

SAE AS25189A-2017 TERMINAL, LUG, FLAG TYPE, CRIMP STYLE, COPPER, CLASS I
SAE ARP669-2002 Color Coding of Terminals and Wiring for Flight Equipment
SAE AS7928-1999 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
SAE AS7928_A1-2004 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
SAE AS7928/7B-2024 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928C-2019 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification for
SAE AS7928A_A1-2008 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
SAE AS7928/8B-2021 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/8-2013 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/7-1999 Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees C Total Conductor Temperature FSC 5940; Should Be Used Instead of MIL-T-7928/7, Which Was Cancelled on 3
SAE AS7928/7A-2014 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/1F-2024 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/7A-2018 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/8-2007 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/1E-2021 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/1A_A1-2004 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II Class 1 for 150°C Total Conductor Temperature
SAE ARP1928B-2022 Torque Recommendations for Attaching Electrical Wiring Devices to Terminal Boards or Blocks, Studs, Posts, etc.
SAE AS81714/12-1998 Terminal Junction System, Terminal Junction Blocks, Sectional, Wire In-Line Junctions, Double, Series I
SAE AS7928/4A-2009 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthered, Type II, Class 1 (for 150°C Total Conductor Temperature)
SAE AS7928/4-1999 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthered, Type II, Class 1 (for 105°C Total Conductor Temperature)
SAE AS81714/12_A1-2009 Terminal Junction System, Terminal Junction Blocks, Sectional, Wire In-Line Junctions, Double, Series I
SAE ARP506-1959 TERMINALS, LUG AND SPLICE, CRIMP STYLE, INSULATED, COPPER FOR 500°F MAXIMUM
SAE ARP1928A-2017 Torque Recommendations for Attaching Electrical Wiring Devices to Terminal Boards or Blocks, Studs, Posts, etc.
SAE AS81714/65-2012 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SERIES II
SAE AS81714/11-2012 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SERIES I
SAE AS81714/65A-2019 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SERIES II
SAE AS7928/8C-2023 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS81714/12D-2023 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, DOUBLE, SERIES I
SAE AS81714/12C-2021 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, DOUBLE, SERIES I
SAE AS81714/12-2004 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, DOUBLE, SERIES I
SAE AS81714/12A-2015 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, DOUBLE, SERIES I
SAE AS81714/23B-2021 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, ELECTRONIC, IN-LINE JUNCTIONS, INTEGRAL FUSE, SERIES I
SAE AS81714/22-2012 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, ELECTRONIC, IN-LINE JUNCTION, INTEGRAL RESISTOR, SERIES I
SAE AS7928/4_A1-2004 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthered, Type II, Class 1 (for 105°C Total Conductor Temperature)
SAE AS81714/23-2006 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, ELECTRONIC, IN-LINE JUNCTIONS, INTEGRAL FUSE, SERIES I
SAE AS81714/21B-2021 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, ELECTRONIC IN-LINE JUNCTIONS, DIODE, SERIES I
SAE AS81714/21-2012 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, ELECTRONIC, IN-LINE JUNCTIONS, INTEGRAL DIODE, SERIES I
SAE AS81714/23A-2016 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, ELECTRONIC, IN-LINE JUNCTIONS, INTEGRAL FUSE, SERIES I

SAE - SAE International

SAE AS25189-2007 TERMINAL@ LUG@ FLAG TYPE@ CRIMP STYLE@ COPPER@ CLASS I
SAE AS25189-2008 TERMINAL@ LUG@ FLAG TYPE@ CRIMP STYLE@ COPPER@ CLASS I
SAE AS25189B-2019 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ UNINSULATED@ FLAG TONGUE@ SIZES 8-0000@ TYPE I@ CLASS I@ FOR 150 ?C TOTAL CONDUCTOR TEMPERATURE
SAE ARP669-1990 COLOR CODING OF TERMINALS/WIRING FOR FLIGHT EQUIP.
SAE AS81714/12-A1-2009 Terminal Junction System@ Terminal Junction Blocks@ Sectional@ Wire In-Line Junctions@ Double@ Series I
SAE AS7928/1-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 150 Degrees C Total Conductor Temperature
SAE AS7928/1A-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 105 Degrees C Total Conductor Temperature
SAE AS7928/1A-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 105 Degrees C Total Conductor Temperature
SAE AS7928/8A-2015 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS81714/22A-2018 TERMINAL JUNCTION SYSTEM@ TERMINAL JUNCTION BLOCKS@ ELECTRONIC@ IN-LINE JUNCTION@ INTEGRAL RESISTOR@ SERIES I
SAE AS7928/4B-2015 TERMINALS@ LUG AND SPLICES@ CONDUCTOR@ CRIMP STYLE@ COPPER TERMINAL@ LUG@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TYPE II@ CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS81714/11A-2017 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SERIES I

American Society for Testing and Materials (ASTM)

ASTM B286-07(2012) Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
ASTM B470-02(2012) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B470-02 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B470-02(2007) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B286-95 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
ASTM B470-02(2017) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B470-95 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B286-07(2017) Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
ASTM B286-20 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

Lithuanian Standards Office

LST EN 60947-7-1-2009 Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (IEC 60947-7-1:2009)
LST EN 60947-7-2-2009 Low-voltage switchgear and controlgear -- Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors (IEC 60947-7-2:2009)

German Institute for Standardization

DIN 47658:1975 Branch terminals in house connections for copper and aluminium conductors
DIN VDE 0611-4:1991 Terminal blocks for connecting copper conductors; distribution terminal blocks up to 6 mm<(hoch)2>
DIN 46206-3:1983-05 Terminals for electrical equipment; flat terminals for equipment from and above 52 kV; basic dimensions, coordination
DIN 47616:1971 Flat connecting blocks and terminal strips for telecommunication systems; requirements, tests
DIN EN 60947-7-4:2014 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors (IEC 60947-7-4:2013); German version EN 60947-7-4:2013

NEMA - National Electrical Manufacturers Association

NEMA IS 4-1968 TERMINAL BLOCKS FOR INDUSTRIAL CONTROL EQUIPMENT AND SYSTEMS

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0611-7-4-2018 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors (IEC 121A/176/CDV:2017); German and English version prEN 60947-7-4:2017

KR-KS

KS C IEC 60947-7-2-2021 Low-voltage switchgear and controlgear —Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors

Indonesia Standards

SNI 04-6282.7.2-2001 Low-voltage switchgear and controlgear equipment. Part 7: Ancillary equipment - Section 2: Protective conductor terminal blocks for copper conductors

DIN

DIN EN 60947-7-2:2003 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment; Protective conductor terminal blocks for copper conductors (IEC 60947-7-2:2002); German version EN 60947-7-2:2002
DIN EN 60947-7-1:2003 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment; Terminal blocks for copper conductors (IEC 60947-7-1:2002 + Corrigendum 1:2003); German version EN 60947-7-1:2002

GOST

GOST IEC 60947-7-4-2021 Low-voltage switchgear and control gear. Part 7-4. Ancillary equipment. PCB terminal blocks for copper conductors

European Committee for Standardization (CEN)

EN 50027:1979 Low voltage switchgear and controlgear for industrial use; Terminal aperture sizes for unprepared round copper conductors

National Electrical Manufacturers Association（NEMA)

NEMA ICS 4-2005 Terminal Blocks

GOSTR

GOST IEC 61210-2017 Connecting devices. Flat quick-connect clamps for copper electrical conductors. Safety requirement

YU-JUS

JUS N.R4.205-1989 Electromechanical components for electronic eguipments. Fiat, guick-connect ter- minations

Japanese Industrial Standards Committee (JISC)

JIS C 2805:2003 Crimp-type terminal lugs for copper conductors

AIA/NAS - Aerospace Industries Association of America Inc.

NASM77073-2001 Terminal@ Lug@ Solder Type@ Phosphor Bronze Stamping@ Locking Type Flat@ One Hole

Others: Copper terminal equipment,Equipment terminals,Equipment terminals,Protective conductor terminal blocks for copper conductors,Copper conductor terminal block,Terminal block for copper conductors