High voltage test

High voltage test, Total:89 items.

The international standard classification for "High voltage test" includes: Electricity. Magnetism. Electrical and magnetic measurements , Refractories , Measurement of electrical and magnetic quantities , Plug-and-socket devices. Connectors , Equipment for the chemical industry .

The Chinese standard classification for "High voltage test" includes: Technical Management , Other electronic instrument and equipment , Iron ore , Electromagnetic Measurement , Electrical instrument and meter in general , Connector , Non-metal chemical machinery equipment , Unshaped refractory .

Professional Standard - Electron

SJ/T 11384-2008 General specification of withstanding voltage tester
SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34218-2017 Refractory products--Determination of compressive strength at elevated temperature

Professional Standard - Electricity

DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester

National Metrological Verification Regulations of the People's Republic of China

JJG 795-1992 Verification Regulation of Withstanding Voltage Tester
JJG 795-2004 Verification Regulation of Withstanding Voltage Testers
JJG 795-2016 Withstanding Voltage Testers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23711.3-2009 High temperature test method for pressure vessels lined with fluoroplastics
GB 12272-1990 RF coaxial connector resistance to RF high potential voltage test method
GB/T 32192-2015 Withstanding voltage tester
GB/T 12272-1990 Measuring method of radio-frequency high potential withstanding voltage for radio frequency coaxial connectors

Group Standards of the People's Republic of China

T/QGCML 4569-2024 High-voltage decorative fire-resistant board
T/QGCML 4545-2024 High temperature and high humidity resistant moisture content tester
T/TLRIA 0002-2017 With stant high temperature and high pressure compression rubber element for packer
T/CSEE 0158-2020 Partial discharge ultra-high frequency measurement method under GIS field impact withstand voltage test
T/QGCML 4627-2024 Wear-resistant high pressure plunger pump

Professional Standard - Ferrous Metallurgy

YB/T 2208-1998 Test method for crushing strength of castables refractory at elevated temperature

Professional Standard - Machinery

JB/T 7616-1994 Steep current impulse resistance test for insulator of high-tension lines

机械工业部

JB 6204-1992 Specifications for stator insulation withstand voltage test of large high-voltage AC motors

Professional Standard - Pharmaceutical Packaging

YBB 0017(03)-2003 Internal Pressure Resistance Determination Method (Trial)

Korean Agency for Technology and Standards (KATS)

KS K 0592-2011 Test method for water resistance of coated cloth:High range, hydrostatic pressure method
KS C 0901-2006 HIGH-VOLTAGE TEST TECHNIQUES
KS C 3403-2020 High-Voltage Resistance Cables for Automobile
KS F 2296-1999 Windows and doorsets - Wind resistance test
KS M 7082-2007 PAPER AND BOARD-DETERMINATION OF BURSTING STRENGTH BY MULLEN HIGH-PRESSURE TESTER

Canadian General Standards Board （CGSB)

CAN/CGSB-4.2 NO.26.5-M89-1989 Textile Test Methods Water Resistance - High-Pressure Penetration Test
CGSB 4.2 NO. 26.5-M89-CAN/CGSB-1989(R2004) Textile Test Methods Water Resistance - High-Pressure Penetration Test
CGSB 4.2 NO. 26.5-M89-CAN/CGSB-1989 Textile Test Methods Water Resistance - High-Pressure Penetration Test

JP-JCS

JCS 4507-2007 High voltage fire proof cables

German Institute for Standardization

DIN 19430:2021-05 Protective clothing - Clothing against high-pressure water jets - Requirements and test methods
DIN EN ISO 13257:2019-04 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018); German version EN ISO 13257:2018

SE-SIS

SIS SS-IEC 60:1991 Higfi-voltage test techniques
SIS SEN 21 03-1964 High-voltage test techniques

Spanish Association for Standardization (UNE)

UNE-EN ISO 2746:2015 Vitreous and porcelain enamels - High voltage test (ISO 2746:2015)
UNE-EN ISO 13257:2020 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)

Association Francaise de Normalisation

NF EN ISO 2746:2015 Émaux vitrifiés - Essai sous haute tension
NF EN 61621:1998 Dry Solid Insulating Materials - High Voltage, Low Current Arc Discharge Resistance Test
NF B40-320*NF ISO 22685:2022 Refractory products - Determination of compressive strength at elevated temperature
NF ISO 22685:2022 Refractory products - Determination of compressive strength at elevated temperature
NF E48-618:1973 Fluids for hydraulic power systems. Determination of ignitability offire-resistant fluids atomized under high pressure with screen.
NF EN 2591-225:2008 Aerospace series - Electrical and optical connection elements - Test methods - Part 225: withstand high HF voltage

HU-MSZT

MSZ 1580/5-1981 High voltage switch test
MSZ 7535-1984 Plastic transport box. High temperature resistance test and detection

IET - Institution of Engineering and Technology

HGIH VOLT ENG TEST-2013 High Voltage Engineering Testing
HIGH VOLT ENG TEST-2001 High Voltage Engineering and Testing

Society of Automotive Engineers (SAE)

SAE AMS5564-1985 STEEL TUBING, CORROSION RESISTANT 19Cr - 10Ni (SAE 30304) High Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless
SAE AMS5564A-1986 STEEL TUBING, CORROSION RESISTANT 19Cr - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless
SAE TS323-1-1985 TS323 Test for Electrical Connectors Dielectric Withstand
SAE TS377-1-1990 TS377 Test for Silicone Elastomer High Temperature Endurance and Fluid Resistance

SCC

IEC 60060:1962 High-voltage test techniques
AATCC 127-2013 Water Resistance: Hydrostatic Pressure Test
AATCC 127-2008 Water Resistance: Hydrostatic Pressure Test
AATCC 127-2017 Water Resistance: Hydrostatic Pressure Test
CEI EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
BS HB 10210:2002 High Voltage Engineering and Testing
BS 923:1972 Guide on high-voltage testing techniques
MIL MIL-C-70509-1985 CARTRIDGE, 9MM, TEST, HIGH PRESSURE, XM905
DIN 19430 E:2020 Draft Document - Protective clothing - Clothing against high-pressure water jets - Requirements and test methods

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 4-1995 Standard Techniques for High-Voltage Testing Amendment 4a: 03/17/2001

Standard Association of Australia （SAA）

AS C328:1965 High voltage testing techniques
AS 4362.2:1996 High-voltage test techniques for low-voltage equipment - Test equipment
AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength
AS C328:1960 Recommendations for high voltage testing techniques
AS C328(INT):1960 Recommendations for high voltage testing techniques

RO-ASRO

STAS 6638-1987 Metals tcsting HIGH TEmpEratuResTEns1lE tEst of mEtaiLEc matEriat.s
STAS 6669/2-1986 HIGH-VOLTAGE TESTS Test methods
STAS 6669/1-1986 HIGH VOLTAGE TESTS General specifications

YU-JUS

JUS N.A5.542-1989 High-voltage test tecbniques. Test procedures
JUS N.A5.543-1989 Righ voltage test techniques. Heasuring devices

Indonesia Standards

SNI 15-1783-1990 Chammote refractory mortars, hardened at high temperature

GSO

BH GSO IEC 61621:2016 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
GSO IEC 61621:2015 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges

British Standards Institution (BSI)

BS EN 61621:1997 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
BS 7403-3:1998 Full-flow lubricating oil filters for internal combustion engines. Methods of test for resistance to high differential pressure and to elevated temperature

International Organization for Standardization (ISO)

ISO 22685:2021 Refractory products — Determination of compressive strength at elevated temperature
ISO 4548-3:1997 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 3: Resistance to high differential pressure and to elevated temperature

PL-PKN

PN E04067-1970 High voltages measurements Switching surge tests

Defense Logistics Agency

DLA MIL-DTL-83296 A-2000 FITTINGS, CORROSION RESISTANT STEEL, HIGH TEMPERATURE HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC
DLA MIL-DTL-83296 A SUPP 1-2000 FITTINGS, CORROSION RESISTANT STEEL, HIGH TEMPERATURE HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC
DLA QPL-83296-14-2006 FITTINGS, CORROSION RESISTANT STEEL, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC
DLA QPL-83296-14 NOTICE 1-2008 FITTINGS, CORROSION RESISTANT STEEL, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI), HYDRAULIC AND PNEUMATIC

SAE - SAE International

SAE AMS5564B-1992 Steel@ Corrosion Resistant@ Tubing 19Cr - 10Ni (SAE 30304) High- Pressure Hydraulic@ Welded Plus Ultrasonically Tested or Seamless (UNS S30400)

Japanese Industrial Standards Committee (JISC)

JIS C 3409:1993 High-voltage resistance cables for automobile

United States Navy

NAVY MIL-R-25042 B NOTICE 1-1996 RESIN, POLYESTER, HIGH TEMPERATURE RESISTANT, LOW PRESSURE LAMINATING
NAVY MIL-R-25042 B-1967 RESIN, POLYESTER, HIGH TEMPERATURE RESISTANT, LOW PRESSURE LAMINATING

American Society for Testing and Materials (ASTM)

ASTM D2893-99 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

IEC - International Electrotechnical Commission

IEC 60060 SET- High-Voltage Test Techniques Series

BR-ABNT

ABNT MB-433-1979 High voltage electrical testing process

CZ-CSN

CSN 34 6471-1986 Test methods for electric insulating materials. Test method for determination of resistance insulating materials to high-voltage arc