Stability Test Intermediate Conditions

Stability Test Intermediate Conditions, Total:113 items.

The international standard classification for "Stability Test Intermediate Conditions" includes: Road vehicles in general , Industrial trucks , Thermal insulation , Powder metallurgy .

The Chinese standard classification for "Stability Test Intermediate Conditions" includes: Storage equipment and handling machinery , Optical communication equipment , Heat insulation, sound absorption, light fireproof material , Metal physical property test method .

Group Standards of the People's Republic of China

T/CAMS 156-2023 Specifications for drug stability test chambers

Professional Standard - Traffic

JT/T 117-1993 Specifications for the strenth tester of the stablized soil

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40499-2021 General condition of vehicle dynamics test for heavy vehicles and buses
GB/T 40501-2021 General condition of vehicle dynamics test for passenger cars

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 26949.20-2016 Industrial trucks—Verification of stability—Part 20:Additional stability test for trucks operating in the special condition of offset load,offset by utilization

Professional Standard - Post and Telecommunication

YD/T 1067-2000 Technical requirements for stabilized optical source2000

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 43096-2023 Metallic powders—Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
GB/T 30806-2014 Thermal insulating products for building applications―Determination of dimensional stability under specified temperature and humidity comditions

GSO

GSO IEC 61070:2014 Compliance test procedures for steady-state availability
GSO ISO 1063:2008 Surface active agents -- Determination of stability in hard water
OS GSO ISO 1063:2008 Surface active agents -- Determination of stability in hard water

American Society for Testing and Materials (ASTM)

ASTM D5304-05 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM RR-D02-1463 1999 D6468-Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D6468-08(2013) Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D6468-22 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D6468-08(2019) Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D6468-08 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM E2472-12(2018) Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E2472-12(2018)e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E2472-12 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E2472-06e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E2472-12e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM RR-D02-1598 2003 D5304-Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D5304-20 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D5304-15 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D4625-92(1998) Standard Test Method for Distillate Fuel Storage Stability at 43176C (110176F)
ASTM D4625-21 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D4625-14 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D8022-20 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
ASTM E2472-12(2018)e3 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM D5304-06 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D7342-20 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)

Indonesia Standards

SNI 06-0900-1989 Room condition for plastic stabilizing and test

IN-BIS

IS 7552-1974 Stability testing of trucks operating under special conditions
IS 12726-1989 Order Picking Truck – Stability and Stability Testing

GM Daewoo

GMKOREA EDS-T-7656-2011 Test method for determining dimensional stability under humid conditions

CZ-CSN

CSN 50 0315-1961 Paper testing —Dimensional stability of páper
CSN 50 0377-1973 Paper testing — Dimensional stability at 33/83 % R- H.
CSN 64 0146-1984 Testing of plastics eat stability and fiie-resistance during he hot mandrel test
CSN 67 6011-1962 Test of printing ink stability in water
CSN 64 5405-1974 Testing of cellular materials. Determination of dimensional stability of cellular plastics
CSN 64 0610-1977 Plastics testing. Determination of the dimensional stability of plastic films
CSN 65 6235-1983 Oils. Oxidation stability test of mineral oils
CSN 67 6010-1962 Test of printing ink stability during toriag
CSN 79 3845-1981 Testing of leather. Determination of the area stability

International Telecommunication Union (ITU)

ITU-R TF.538-3 FRENCH-1994 Measures for Random Instabilities in Frequency and Time (Phase)
ITU-R TF.538-3 SPANISH-1994 MEASURES FOR RANDOM INSTABILITIES IN FREQUENCY AND TIME (PHASE)
ITU-R TF.538-4-2017 Measures for random instabilities in frequency and time (phase)

KR-KS

KS M 2416-2014(2024) Petroleum products — Determination of the oxidation stability of middle-distillate fuels

Korean Agency for Technology and Standards (KATS)

KS M 2416-2014(2019) Petroleum products — Determination of the oxidation stability of middle-distillate fuels
KS R 6015-2001(2007) FORK LIFT TRUCKS-STABILITY AND STABILITY TESTS
KS R 1090-2004 ORDER PICKING TRUCKS-STABILITY AND STABILITY TESTS
KS R 1090-1989(1999) ORDER PICKING TRUCKS-STABILITY AND STABILITY TESTS
KS R 6014-1995 Stability and Testing method for stability of counter balance fork lift truck
KS M ISO 1063-2021 Surface active agents-Determination of stability in hard water
KS M ISO 1063:2006 Surface active agents-Determination of stability in hard water

SCC

DANSK DS/EN ISO 12205:1997 Petroleum products - Determination of the oxidation stability of middle-distillate fuels
AENOR UNE-EN ISO 12205:1996 Petroleum products. Determination of oxidation stability of middle distillate fuels. (ISO 12205:1995).
NS-EN ISO 12205:1996 Petroleum products — Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995)
DANSK DS/ISO 5110:2023 Test method for flight stability of a multi-copter unmanned aircraft system (UAS) under wind and rain conditions
DIN EN 196-3 E:2016 Draft Document - Methods of testing cement - Part 3: Determination of setting times and soundness; German and English version FprEN 196-3:2016
DANSK DS/ISO 18949:2019 Imaging materials – Reflection colour photographic prints – Method for testing stability under low humidity conditions
AENOR UNE-EN 196-3:2017 Cement testing methods. Part 3: Determination of setting time and volume stability.
AWWA QTC97134 Performance of Pilot and Laboratory Scale Model Distribution Systems Under Unsteady-State Conditions
NS-EN 12458:1999 Surface active agents — Determination of stability in hard water
AWWA QTC98279 Quantifying Performance and Robustness of Filters During Non-Steady State and Perturbed Conditions
DANSK DS/EN 12458:1999 Surface active agents - Determination of stability in hard water
IEC TS 61223-2-3:1993 Evaluation and routine testing in medical imaging departments - Part 2-3: Constancy tests - Darkroom safelight conditions

BE-NBN

NBN B 12-207-1978 Cement test methods. Clotting time and stability determination

Society of Automotive Engineers (SAE)

SAE TS366-1-1987 TS366 Test for Electrical Connectors Stability of Male Contacts in the Insert
SAE J883-2008 Test Method for Determining Dimensional Stability of Automotive Textile Materials

Spanish Association for Standardization (UNE)

UNE 31013:1954 STABILITY TEST OF COLLOIDAL POWDERS, BY OBSERVATION OF THE ACIDITY IN COLD.
UNE-EN ISO 12205:1996 PETROLEUM PRODUCTS. DETERMINATION OF THE OXIDATION STABILITY OF MIDDLE-DISTILLATE FUELS. (ISO 12205:1995).
UNE 80-102-1988 Test methods for cement. Determination of cement volume stability and setting time
UNE-EN 12458:1999 SURFACE ACTIVE AGENTS. DETERMINATION OF STABILITY IN HARD WATER
UNE 58413:2002 Industrial tucks operating in special condition of stacking with mast tilted forward. Additional stability test.

AR-IRAM

IRAM 25 592-1960 Determination of the stability of surfactants under acidic or alkaline conditions

AT-ON

ONORM S 5241-2001 Scheme for the determination of the intervals for the constancy testing of X-ray diagnostic equipment

RU-GOST R

GOST 33903-2016 Gasolines. Determination of the stability under accelerated oxidation conditions (induction period)
GOST 11802-1988 Jet fuel. Method of test for determination of thermal-oxidative stability under static conditions
GOST R 57226-2016 Plastics. Determination of the degree of disintegration under defined composting conditions in a pilot-scale test
GOST 18986.20-1977 Semiconductor diodes. Reference zener diodes. Method for measuring warm up time
GOST 18986.21-1978 Reference diodes and stabistors. Method for measuring time drift of working voltage
GOST R 25645.338-1996 Polymeric materials for space technique. Requirements for ultraviolet radiation stability tests
GOST 9144-1979 Motor fuel. Method for determination of thermic stability in static conditions

International Organization for Standardization (ISO)

ISO/FDIS 5110:2023 Test method for flight stability of a multi-copter unmanned aircraft system (UAS) under wind and rain conditions
ISO 5110:2014 Test method for flight stability of a multi-copter unmanned aircraft system (UAS) under wind and rain conditions

Lithuanian Standards Office

LST EN ISO 12205:1999 Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995)
LST EN 12458-2002 Surface active agents - Determination of stability in hard water
LST ISO 1063:1997 Surface active agents. Determination of stability in hard water

German Institute for Standardization

DIN EN ISO 12205:1996-11 Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995); German version EN ISO 12205:1996
DIN EN 12458:1999-04 Surface active agents - Determination of stability in hard water; German version EN 12458:1999

VN-TCVN

TCVN 6017-2015 Cements -Test methods - Determination of setting time and soundness

British Standards Institution (BSI)

22/30421997 DC BS ISO 5110. Test method for flight stability of multi-copter UA under wind and rain conditions
BS 7725-2.3:1994 Evaluation and routine testing in medical imaging departments. Constancy tests. Method for darkroom safelight conditions
BS ISO 18949:2019 Imaging materials. Reflection colour photographic prints. Method for testing stability under low humidity conditions
BS ISO 22915-20:2008 Industrial trucks - Verification of stability - Trucks operating with offset load, offset determined by utilisation - Stability tests
BS ISO 22915-20:2023 Industrial trucks. Verification of stability. Additional stability test for trucks operating in the special condition of offset load, offset by utilization

International Federation of Trucks and Engines

NAVISTAR CEMS BT-25-2009 Fuel Stability Test

SE-SIS

SIS 02 01 21-1968 Atmospheric conditions and time for testing

WRC - Welding Research Council

BULLETIN 81-1962 TESTS ON THE STABILITY OF WELDED STEEL FRAMES TESTS ON THE STABILITY OF WELDED STEEL FRAMES

YU-JUS

JUS U.E7.111-1980 Stabilitv of compression members in rigidframes

GM North America

GM GM9452P-2003 Test for Dimensional Stability

Japanese Industrial Standards Committee (JISC)

JIS Z 0170:1998 Unit loads -- Stability testing
JIS Z 4752-2-3:2005 Evaluation and routine testing in medical imaging departments -- Part 2-3: Constancy tests -- Darkroom safelight conditions
JIS D 6011:1999 Fork lift trucks -- Stability and stability tests

European Committee for Standardization (CEN)

EN 12458:1999 Surface active agents - Determination of stability in hard water

VE-FONDONORMA

COVENIN 934-1976 Test method for stability of asphalt latex in storage bins

Association Francaise de Normalisation

NF X15-015:1973 MEASUREMENT OF RELATIVE HUMIDITY BY MEANS OF ELECTROLYTIC HYGROMETERS.

Danish Standards Foundation

DS/EN 12458:1999 Surface active agents - Determination of stability in hard water

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4257.2:1994 Plastic roof and wall cladding materials - Methods of test - Determination of dimensional stability at 60 degrees Celsius
AS/NZS 2512.7.1:2006 Methods of testing protective helmets - Determination of stability of protective helmets - Static stability

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 57-1959 Test Procedure for EVALUATION of the THERMAL STABILITY of ENAMELED WIRE in AIR