Transformer oil sample testing and detection technology

Transformer oil sample testing and detection technology, Total:225 items.

The international standard classification for "Transformer oil sample testing and detection technology" includes: Power stations in general , Insulating oils , Measurement of electrical and magnetic quantities , Lubricants, industrial oils and related products , Wind turbine systems and other alternative sources of energy , Occupational safety. Industrial hygiene , Transformers. Reactors , Power transmission and distribution networks , Components for electrical equipment in general , Extraction and processing of petroleum and natural gas , Plants and equipment for the food industry , Fuel systems , Railway rolling stock in general , food products in general , Solar energy engineering , Inks. Printing inks , Cereals, pulses and derived products , Air quality in general , Geology. Meteorology. Hydrology , Water quality in general .

The Chinese standard classification for "Transformer oil sample testing and detection technology" includes: Electric power testing technique , Insulating oil , Electrical instrument and meter in general , New energy and others , Labor sanitation , Transformer , Electric drive control equipment , Other electrical production equipment , Power transmission and transformation engineering , Grain and oil/fat processing machinery , Fuel oil heating system , Moving parts , Other material composition analyzer , Grease and oil processing and products , Solar energy , Printing Technology , Cereal crop and forage crop in general , Gas medium and radioactive substance sampling , Hydrology and water conservancy instrument , Environmental monitoring instrument and its complete equipment .

Professional Standard - Electricity

DL/T 2263-2021 Type and factory routine test specification for smart high voltage power transformer
DL/T 848.3-2004 General technical specification of high voltage test devices Part 3: Non partial discharge testing transformer
DL/T 2552-2022 Technical specification for optical fiber temperature measuring device used in oil-immersed transformer
DL/T 2551-2022 Test method for optical fiber temperature measuring device used in oil-immersed transformer
DL/T 385-2010(英文版) Method for detecting electrification tendency of transformer oil
DL/T 385-2010 Determination of electrostatic charging tendency of transformer oil
DL/T 1095-2008 Guide to on-site determination of electrostatic charging tendency of transformer oil
DL/T 264-2022 Guide for field sealing test of oil immersed power transformer
DL/T 848.3-2019 General technical requirements for high-voltage test equipment Part 3: Transformers for testing without partial discharge
DL/T 1951-2018 General technical specification for winding deformation tester of power transformers
DL/T 1256-2013 General Technical Specification for Loss Testers of Transformers without and with Load
DL/T 2115-2020 Testing technical specification for voltage monitor
DL/T 963-2005 General technical specifications of the transformation ratio tester
DL/T 272-2012 Technical specification of 220 kV-750 kV oil immersed power transformer
DL/T 1534-2016 Uhf Detection Method of Partial Discharge of Oil-immersed Power Transformer
DL/T 848.4-2004 General technical specification of high voltage test devices Part 4: Triple-frequency test transformer
DL/T 1617-2016 Technical Specification of Corrosive Sulphur Process Equipment of Transformer Oil
DL/T 1723-2017 Guide for condition based maintenance strategy of 1000kV oil-immersed power transformers (reactors)
DL/T 1243-2013 Guidance for On-site Partial Dischargetest for Convert Transformers
DL/T 1503-2016 Rules for the Inspection of Quick Action Oil-pressure Relays
DL/T 1399.5-2022 Electric power test/inspection vehicle Part 5: Power transformer partial discharge test vehicle
DL/T 1095-2018 On-site determination methods of electrostatic charging degree of transformer oil
DL/T 272-2022 Technical specification of 220kV～750kV oil immersed power transformer
DL/T 1305-2013 General Technical Specification for Transformer Oils Dissipation Factor Tester
DL/T 264-2012 Guide for field sealing test of oil immersed power transformer
DL/T 1684-2017 Guide for condition based maintenance strategy of oil-immersed power transformers(reactors)
DL/T 310-2010 Guide for AC 1000kV oil-immersed transformer and shunt reactor maintenance
DL/T 1400.3-2023 Calibration specification of transformers tester-Part 3: Temperature measuring devices for oil-immersed transformers
DL/T 2264-2021 Site test specification for smart high voltage power transformer
DL/T 1432.2-2016 Testing specification for on-line monitoring device of transformation equipment—Part 2: online monitoring device for dissolved gas in transformer oil
DL/T 2239-2021 Test specification for substation inspection robots
DL/T 848.4-2019 General technical requirements for high-voltage test equipment Part 4: Triple frequency test transformer equipment

Group Standards of the People's Republic of China

T/CEC 354-2020 General technical requirements for transformer low-voltage short-circuit impedance tester
T/CEC 539-2021 Determination of Total Sulfur Content in Transformer Oil by Gas Chromatography-Flame Photometry
T/CSEE 0120-2019 Technical guidelines for thermoelectric detection of distribution transformer windings made of copper and aluminum
T/CES 092-2022 Technical specification for fire simulation test of large-scale converter transformer
T/EJCCCSE 043-2024 Technical requirements for power transformers
T/CEC 672-2022 Specifications for On-site Calibrator of Dissolved Gas Online Monitoring Device in Transformer Oil
T/CSEE 0222-2021 Technical guidelines for UHF detection and separation of multiple partial discharge sources in oil-immersed transformers (reactors)
T/CSEE 0003-2016 Technical specification for the test of transformer intelligent electronic device on protection performance against ground potential rise
T/JSEE 012-2020 Technical specifications for oil-immersed transformer foam-water spray fire extinguishing system
T/CICEIA /CAMS56-2022 Gasoline engine turbocharger variable nozzle ring- General specifications
T/CSEE 0177-2021 Technical requirements of built-in sound insulation board for oil immersed transformer
T/CES 023-2018 Technical specification for series oil transformer of unified power flow controller
T/CSEE 0108-2019 Transformer online oil purification technical specification
T/CSEE 0006-2016 Test specification of live working robot for electric transmission and transformation equipment
T/CSEE 0230-2021 Field application guideline for detection technology of transformer winding deformation by pulse frequency response method
T/SDPEA 0006-2018 Guide for operation and maintenance regulations of natural ester insulating oil-immersed power transformers part 1: standard for hand-over Test
T/CEC 682-2022 Technical specification for power transformer integrated wiring electrical test device
T/CEC 481-2021 Technical specification for vibration characteristic tester of transformer on-load tap-changer
T/GAPEC 004-2019 Specification for Quality Inspection of 10kV oil immersed transformer (except amorphous alloy type)
T/CPSS 1004-2018 Technical specification for performance test of PV-storage integrated converter
T/CSEE 0306-2022 Technical Guidelines for X-ray Digital Imaging Detection of Paper Insulating Materials of Oil-immersed Power Transformers
T/CSEE 0224-2021 Technical specification for distribution transformer energy storage short-circuit test device
T/CEC 138-2017 Specifications for damping rubber materials for oil-immersed transformers
T/SMA 0005-2019 On-site test specification for power transformer sudden-change pressure relay
T/CSEE 0225-2021 Technical specifications for vibration detection of power transformer acceleration method
T/CEC 5065-2021 Technical specifications for oil-immersed transformer foam-water spray fire extinguishing system
T/SEAMTA 000003-2019 short-circuit test transformer
T/EJCCCSE 016-2024 Oil-immersed transformer status monitoring

工业和信息化部/国家能源局

JB/T 12727.4-2016 Nondestructive testing instrument. Standard test block. Part 4: Magnetic particle testing block
JB/T 12727.5-2016 Nondestructive tesing instrument. Standard test block. Part 5: Penetrant testing block
JB/T 12727.3-2016 Nondestructive tesing instrument. Standard testing block. Part 3: Eddy current testing block
JB/T 12726-2016 Nondestructive tesing instrument. Standard testing block. General technical conditions

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16274-1996 Specification and technical requirements for oil immersed power transformers 500kV
GB 13028-1991 Isolating transformers and safety isolating transformers-Requirements
GB/T 27743-2011 Inspection method for transformer of special equipment
GB/T 6451-1995 Specification and technical requirements for three-phase oil immersed power transformers
GB/Z 24843-2009 Technical specification of 1 000 kV single phase oil-immersed auto-transformer
GB/T 6451-2008 Specification and technical requirments for oil-immersed power transformers
GB/T 18470-2001 Technical specifications for passive sampler and monitor
GB/T 6451-2023 Technical parameters and requirements for oil-immersed power transformers
GB/T 6451-2015 Specification and technical requirements for oil-immersd power transformers
GB/T 6451-1999 Specification and technical requirements for three-phase oil-immersed power transformers
GB/Z 34935-2017 Technical specification for oil-immersed smart power transformers
GB/T 25289-2010 Specification and technical requirements for 20 kV oil-immersed distribution transformers
GB 7597-1987 Method of sampling for transformer and turbine oils inelectric power industry
GB/T 34133-2023 Testing code for power conversion system of energy storage system
GB/T 6451-1999(XG1-2002) Specification and technical requirements for three-phase oil immersed power transformers
GB/T 20838-2007 Specification and technical requirements of oil-immersed convertor transformers for HVDC applications
GB/T 7597-2007 Method of sampling for transformer and turbine oils in electric power industry

Professional Standard - Civil Engineering

CECS 187-2005（条文说明） Technical specification for oil evacuation and nitrogen injection equipment of transformer(explanation)

Professional Standard - Recommended Standards for Engineering Construction

CECS 187-2005 Technical specification for oil evacuation and nitrogen injection equipment of transformer

Professional Standard - Petroleum

SY/T 5649-1993 Technical Conditions of Oil Pour Point Testers
SY/T 5710-2002 Technology procedure for performance inspection of testing tools

Professional Standard - Energy

NB/T 25106-2020 Commissioning guideline for inverter and voltage regulating transformer of nuclear power plant
NB/T 32009-2013 Testing Code of Voltage and Frequency Response for Inverter of Photovoltaic Power Station
DL/T 2407-2021 On-site inspection method of dissolved gas content in insulating oil
NB/T 42020-2013 Specification and Technical Requirements for 750kV and 1000kV Oil-immersed Power Transformers

国家粮食局

LS/T 3545-2017 Machine of grain and oils―Sample divider used in inspection

Professional Standard - Machinery

JB/T 6293-1992 Specifications for hand-operated fuel injector calibrator
JB/T 9641-1999 Testing transformers
JB/T 10317-2002 distribution transformers
JB/T 501-2006 Test guide for power transformers
JB/T 10317-2014 Specification and Technical Requirements for Single-phase Oil-immersed Distribution Transformers
JB/T 10780-2007 Specification and technical requirements for 750kV oil-immersed power transformers
JB/T 501-1991 Guidelines for Testing Power Transformers
JB/T 6293-2006 Diesel engines-Testing of fuel injectors Hand-lever operated testing and setting apparatus

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34133-2017 Testing code for power converter of electrochemical energy storage system

工业和信息化部

JB/T 9641-2022 Testing transformers
JB/T 12727.2-2020 Nondestructive tesing instrument-Standard testing block - Part 2: Radiographic testing block
JB/T 501-2021 Test guide for power transformers

Taiwan Provincial Standard of the People's Republic of China

CNS 599-1996 Method of Test for Distribution Transformer
CNS 9467-1982 Method Test for Test Device for Cylinder Pressure of Gasoline Engine

Professional Standard - Coal

MT/T 630-1996 Technical Specifications for Negative-pressure Concertina Sampler Used for Gas Detector Tube
MT/T 628-1996 Technical Specifications for Negative-pressure Circular Sampler Used for Gas Detector Tube
MT/T 629-1996 Technical Specifications for Positive-pressure Circular Sampler Used for Gas Detector Tube

Professional Standard - Railway

TB/T 2229-2004 Technical specification for oil damper experiment of locomotive and rolling stock

生态环境部

HJ/T 93-2003 Specification and test procedures for PM10 sampler

机械工业部

JB 6293-1992 Technical specifications of hand-operated oil injector calibrator

Professional Standard - Chemical Industry

HG/T 6190.4-2023 Technical Application Guidelines for Medium Voltage Frequency Converters for Petroleum and Chemical Industry Part 4: Use, Maintenance and Inspection
HG/T 6191.3-2023 Technical Application Guidelines for Low Voltage Frequency Converters for Petroleum and Chemical Industry Part 3: Installation, Commissioning and Acceptance
HG/T 6190.3-2023 Technical Application Guidelines for Medium Voltage Frequency Converters for Petroleum and Chemical Industry Part 3: Installation, Commissioning and Acceptance
HG/T 6191.4-2023 Technical Application Guidelines for Low Voltage Frequency Converters for Petroleum and Chemical Industry Part 4: Use, Maintenance and Inspection

Professional Standard - Commodity Inspection

SN/T 1179-2003 Rules for the inspection of power transformers for export

国家能源局

NB/T 32032-2016 Technical code for inverter efficiency testing of photovoltaic power station
NB/T 10177-2019 Electrical safety inspecting-testing specification of in-service power transformers for coal mines
NB/T 10475-2020 High oil pressure oil receiver technical conditions

Shandong Provincial Standard of the People's Republic of China

DB37/T 3514-2019 Specifications for electrical safety testing and inspection of power transformers in use in coal mines

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 24843-2018 Technical specification of 1 000 kV single phaseoil-immersed auto-transformer
GB/T 37511-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Mixolab test
GB/T 37409-2019 Testing specification for photovoltaic grid-connected inverter
GB/T 38153.3-2019 Graphic technology—Laboratory preparation of test prints—Part 3:Screen printing inks
GB/T 38153.2-2019 Graphic technology—Laboratory preparation of test prints—Part 2:Liquid printing inks

Fujian Provincial Standard of the People's Republic of China

DB35/T 968-2009 Technical conditions for energy-saving three-phase oil-immersed distribution transformers

中国石油天然气总公司

SY/T 5462.6-1994 High-temperature and high-pressure steel target test for testing and comprehensive evaluation of technical indicators of shaped energy perforating charges (devices) in oil and gas wells

Professional Standard - Surveying and Mapping

CH/T 1028-2012 Technical rules for quality inspection and acceptance of deformation surveying results

未注明发布机构

IEEE Std C57.129-2017 General requirements and test code for oil-immersed HVDC converter transformers
DIN EN 12504-1:2000 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression

国家粮食和物资储备局

LS/T 3547-2018 Grain and oil machinery—Technical requirements and test methodfor bulk grainsampler with power-operated

Professional Standard - Grain

LS/T 3706-2012 Test Instrument of Grain and Oils - Technical Requirements and Test Method for Automatic Titration Analyzer

Professional Standard - Education

JY 15-1985 Small transformer technical conditions

Professional Standard - Traffic

JT/T 67-1993 Technical requirements for commissioning test of marine diesel engine after overhaul

Professional Standard - Environmental Protection

HJ/T 372-2007 The technical requirement and test procedures for Water quality automatic sampler
HJ/T 375-2007 Technical requirement and test procedures for ambient air sampler
HJ/T 174-2005 Specifications and test procedures for automatic rainfall sampler

HU-MSZT

MSZ 9230/1-1970 Technical requirements and test transformers
MI 9230/4-1982 Transformer discharge detection
MSZ 05 46.1409-1975 MSZ-05 46.1409-75 Technical requirements and testing of small transformers for arc welding

CZ-CSN

CSN 05 2210-1989 Are welding transformers Technical requirements and testing
CSN 34 7010 Cast.74-1972 Transformer-oil resistance test of enamelled round wire
CSN 35 1083-1985 Power transformers. Short-circuit tests of transformers
CSN 79 3805-1985 Testing of furs. Sampling and conditioning of the test pieces and furs
CSN 35 1325 Cast.2-1989 Transformers and inductors for communication equipment. General technical requirements and test methods

RU-GOST R

GOST R 55015-2012 Power transformers. Tanks leakage tests
GOST R 55014-2012 Power transformers. Tests for mechanical strength of tanks
GOST 12.2.024-1987 Occupational safety standards system. Noise. Power oil-immersed trasformers. Norms and control methods
GOST R 50557-1993 Hydraulic fluidpower. Fluid sample containers. Qualifying and controlling cleaning methods
GOST 30030-1993 Isolating transformers and safety isolating transformers. Technical requirements
GOST 12965-1985 General purpose 110 and 150 kV power oil transfomers. Specifications
GOST 11920-1985 General purpose oil power transfomers 35 kV and including. Specifications
GOST 17544-1985 General-purpose 220, 330, 500 and 750 kV power oil transformers. Specifications
GOST 3484.2-1988 Power transformers. Heating tests

German Institute for Standardization

DIN 42545:1987 Transformers; oil trap DN 25; requirements and test
DIN 42545:1987-08 Transformers; oil trap DN 25; requirements and test
DIN EN 13184:2001 Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001

CN-QIYE

Q/GDW 312-2009 Technical specifications for oil-immersed transformers for 1000kV systems
Q/GDW 170-2008 Guidelines for condition maintenance of oil-immersed transformer (reactor)
Q/GDW 604-2011 Guidelines for Condition Maintenance of 35kV Oil-immersed Transformer (Reactor)
Q/GDW 540.2-2010 Inspection Specifications for Online Monitoring Devices of Transformer Equipment Part 2: Online Monitoring Devices for Dissolved Gases in Transformer Oil

GSO

GSO ISO 12713:2013 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
NB/T 11491-2024 Technical specification for quick oil drain device for converter transformer

AT-ON

ONORM E 4762-1974 Transformers; oil sampling vent and air relief vent

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C57.12.90-1993 Test code for liquid-immersed distribution, power, and regulating transformers and guide for short-circuit testing of distribution and power transformers
IEEE Std C57.100-1986 Test procedure for thermal evaluation of oil-immersed distribution transformers
IEEE Std C57.12.90-2006 Test code for liquid-immersed distribution, power, and regulating transformers
IEEE Std C57.12.90-1999 Test code for liquid-immersed distribution, power, and regulating transformers
IEEE Std C57.12.90-2015 Test Code for Liquid-Immersed Distribution@ Power@ and Regulating Transformers
IEEE Std C57.12.00-1993 General requirements for liquid-immersed distribution, power, and regulating transformers
IEEE Std C57.91/COR 1-2002 Guide for loading mineral-oil-immersed transformers; Corrigendum 1
IEEE Std C57.129-2007 General requirements and test code for oil-immersed HVDC converter transformers
IEEE Std C57.98/COR-1998 Transformer impulse tests; Correction
IEEE Std C57.98-1986 Guide for transformer impulse tests
IEEE C57.168-2023 IEEE Guide for Low-Frequency Dielectric Testing for Distribution, Power, and Regulating Transformers
IEEE Std C57.168-2023 IEEE Guide for Low-Frequency Dielectric Testing for Distribution, Power, and Regulating Transformers
IEEE Std C57.98-2011 Guide for Transformer Impulse Tests
IEEE Std C57.100-2011 Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers

RO-ASRO

STAS 10156-1975 Paints and varhishes Examinations and preparation of samples for testing
STAS 10381/4-1976 Transformers OPERATION, CHARACTERISTICS, TESTING Terminology TESTING

British Standards Institution (BSI)

BS EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method
BS EN 13184:2001(2007) Non-destructive testing - Leak testing - Pressure change method
BS ISO 2834-1:2006 Graphic technology - Laboratory preparation test prints - Paste inks
BS EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
BS ISO 2834-1:2020 Graphic technology. Laboratory preparation of test prints. Paste inks
BS EN 12504-1:2009 Testing concrete in structures Part 1: Cored specimens — Taking, examining and testing in compression
BS EN 12504-1:2019(2020) Testing concrete in structures Part 1: Cored specimens — Taking, examining and testing in compression
BS EN 13445-5:2009+A3:2011 Unfired pressure vessels. Inspection and testing
BS EN 13445-5:2002 Unfired pressure vessels - Inspection and testing

Indonesia Standards

SNI 04-0204-1987 High voltage transformer, Specification

SCC

SPC GB/T 37511-2019 Inspection of grain and oils -- Doughs rheological properties determination of wheat flour -- Mixolab test (TEXT OF DOCUMENT IS IN CHINESE)
SPC GB/T 14615-2019 Inspection of grain and oils -- Doughs rheological properties determination of wheat flour -- Extensograph test (TEXT OF DOCUMENT IS IN CHINESE)
NS-EN 12504-1:2019+AC:2020 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
UNE-EN 12504-1:2001 Testing concrete in structures. Part 1: Cored specimens. Taking, examining and testing in compression.

Japanese Industrial Standards Committee (JISC)

JIS Z 2332:1993 Test method for leaks using the pressure change measurement
JIS Z 2332:2012 Leak testing method using pressure change

GOSTR

GOST 9736-1991 Electric apparatus of direct transformation for measuring non-electrical values. General technical requirements and methods of tests

Korean Agency for Technology and Standards (KATS)

KS C 4309-1986 Short-circuit testing for transformer
KS C 4309-2011(2021) Short-circuit testing for transformer
KS C 1001-1970 Impulse voltage testing for instrument transformers
KS C 4309-2011(2016) Short-circuit testing for transformer
KS C 0902-1982 Impulse voltage testing for transformers
KS C 0902-2011 Impulse voltage testing for transformers
KS C 4309-2021 Short-circuit testing for transformer
KS C 4309-2011 Short-circuit testing for transformer

Association Francaise de Normalisation

NF P18-444-1:2012 Testing concrete in structures - Part 1 : cored specimens - Taking, examining and testing in compression.
NF A09-494*NF EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method

ES-AENOR

UNE 21-302 Pt.321-1990 Glossary of electric power technology. Measuring transformer

International Electrotechnical Commission (IEC)

IEC 60742:1983 Isolating transformers and safety isolating transformers - Requirements

American Society for Testing and Materials (ASTM)

ASTM E1962-98 Standard Test Method for Ultrasonic Surface Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques

PL-PKN

PN C84039-04-1988 Potassium hydroxide technical Sampling for testing
PN E04070-13-1986 Power transformers Test methods Lightning impulse test
PN E04070-1969 Transformers Testing methodes

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C57.127-2000 IEEE Trial-Use Guide for the Detection of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers
IEEE C57.129-2007 General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers

European Committee for Standardization (CEN)

EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression

American Welding Society (AWS)

AWS WIT-E-2008 WELDING INSPECTION TECHNOLOGY Sample CWI Fundamentals Examination (Fifth Edition)
AWS WIT-E-2006 WELDING INSPECTION TECHNOLOGY Sample CWI Fundamentals Examination Fifth Edition

AWS - American Welding Society

WIT-E-2006 WELDING INSPECTION TECHNOLOGY Sample CWI Fundamentals Examination (Fifth Edition)
WIT-E-2008 WELDING INSPECTION TECHNOLOGY Sample CWI Fundamentals Examination (Fifth Edition)

IN-BIS

IS 13956-1994 Testing transformers - specification

AR-IRAM

IRAM OFICIAL 2112 N.I.O.-1958 Transformers and voltage-regulating transformers for power transmission and distribution (examination under short-circuit conditions)

ZA-SANS

SANS 174:1992 Paints and varnishes - Examination and preparation of samples for testing

FI-SFS

SFS 3280 E-1984 In case of interpretation disputes the Finnish version applies. Date of translation 1986-05-15

CL-INN

INDITECNOR 24-13ch-1962 Detonators: sampling, inspection and testing

International Organization for Standardization (ISO)

ISO 2834-1:2020 Graphic technology - Laboratory preparation of test prints - Part 1: Paste inks

Others: