Methane Laboratory Measurement Methods

Methane Laboratory Measurement Methods, Total:325 items.

The international standard classification for "Methane Laboratory Measurement Methods" includes: Coals , Explosives. Pyrotechnics , Optical measuring instruments , Surface active agents , Soil quality and pedology in general , Pulps , Test conditions and procedures in general , Extraction and processing of petroleum and natural gas , Geology. Meteorology. Hydrology , Chemical analysis of metals , Mining and quarrying , Installations and equipment for waste disposal and treatment , Medical Sciences and health care facilities in general .

The Chinese standard classification for "Methane Laboratory Measurement Methods" includes: Coal analysis methods , Hygiene, safety and labor protection , Optical metrological instrument , Basic standards and general methods for catalyst , Soil and fertilizer in general , Papermaking in general , Basic standards and general methods , Tooth paste, soap and detergent , Petroleum geology exploration , Meteorology , Petroleum development , Environmental protection equipment , Cereal crop and forage crop in general , Leather processing and products in general , Chemical Measurement , Sanitation in general .

Military Standard of the People's Republic of China-General Armament Department

GJB 533.22-1988 Detection method for 45 components of submarine cabin air. Determination of hydrogen, oxygen, nitrogen and methane content by gas chromatography.
GJB 533.29-1988 Detection method for 45 components of submarine cabin air. Determination of Freon-11, chloroform, and carbon tetrachloride content by gas chromatography.
GJB 533.32A-2021 Methods for detection of air components in submarine cabins - Part 32: Determination of undecane, dodecane, tridecane, tetradecane, pentadecane, hexadecane and heptadecane by chromatography/mass spectrometry
GJB 533.26-1988 Detection methods for 45 components of submarine cabin air. Determination of methanol, ethanol, acetaldehyde, and methylene chloride content by gas chromatography.
GJB 533.28-1988 Detection methods for 45 components of submarine cabin air. Determination of benzene, toluene, ethylbenzene, xylene, and 1,2-dichloroethane content by gas chromatography.
GJB 533.31-1991 Detection method of air components in submarine cabin 2-Determination of methylpentane, heptane, methylcyclohexane, octane, nonane and decane content chromatography/mass spectrometry
GJB 533.31A-2021 Methods for detection of air components in submarine cabins - Part 31: Determination of the contents of 2-methylpentane, heptane, methylcyclohexane, octane, nonane and decane by chromatography/mass spectrometry
GJB 533.32-1991 Methods for detecting air components in submarine cabins. Determination of undecane, dodecane, tridecane, tetradecane, pentadecane, hexadecane and heptadecane content by chromatography/mass spectrometry.

Group Standards of the People's Republic of China

T/QGCML 4130-2024 Greenhouse Gases Carbon Dioxide and Methane Measurement Methods

Professional Standard - Coal

MT 358-1994 Determination method of chloroform extract group components of coal
MT 357-1994 Determination method of chloroform extract from coal
MT 28-2005 Methane Detector of Interferometer Type
MT/T 836-1999 Method of determining the minimum explosion concentration for methane and coal dust mixtures
MT 28-1994 Optical interferometric methane detector
MT/T 752-1997 Determine method of methane adsorption capacity in coal
MT/T 357-1994 Determination Method of Trichloromethane Extract of Coal

Professional Standard - Chemical Industry

HG/T 2510-1993 Methanation Catalyst Test Method
HG/T 2510-2006 Test method of activity for methanation catalyst
HG/T 2510-2014 Test method of activity for methanation catalyst

工业和信息化部

QB/T 5159-2017 Artificial Leather - Test Methods for Synthetic Leather - Determination of N-Methylpyrrolidone Content
QB/T 5430-2019 Footwear-- Chemical tests - Determination of N-methyl pyrrolidone(NMP)
YS/T 1300-2019 Determination of methyldichlorosilane，trimethylchlorosilane and methyltrichlorosilane in chlorosilanes - Gas chromatography-mass spectrometry method

煤炭工业部

MT/T 358-1994 Determination Method of Trichloromethane Extract Group Components of Coal

未注明发布机构

AS/NZS 3580.11.1:2013(R2016) Ambient air sampling and analysis methods Direct-reading instrument method for determination of methane and non-methane organic compounds in ambient air
ASTM RR-D02-1252 1989 D5004-Test Method for tae Real Density of Calcined Petroleum Coke by Xylene Displacement
DIN EN ISO 25139 E:2009-06 Handbook of Methods for Determining Methane Concentration by Gas Chromatography from Stationary Source Emissions (Draft)
DIN EN ISO 11274 E:2018-04 Laboratory method for determination of soil quality and water retention properties (draft)
ASTM RR-E01-1025 1998 E1938-Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27411-2012 Routine methods for evaluation and expression of measurement uncertainty in testing laboratory
GB/T 4324.19-1984 Methods for chemical analysis of tungsten - The diantipyrylmethane photometric method for the determination of titanium content
GB/T 7979-1987 Pulps-Determination of dichloromethane soluble matter
GB/T 32720-2016 Laboratory determination of soil microbial respiration
GB/T 4325.19-1984 Methods for chemical analysis of molybdenum--The diantipyrylmethane photometric method for the determination of titanium content
GB/T 22730-2008 Determination of chloroform in toothpaste—Gas chromatography

Professional Standard - Environmental Protection

HJ 604-2017 Ambient air - Determination of total hydrocarbons, methane and nonmethane hydrocarbons - Direct injection/Gas chromatography
HJ 38-2017 Stationary source emission - Determination of total hydrocarbons,methane and nonmethane hydrocarbons - Gas chromatography

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34287-2017 Greenhouse gas--Methane measurement--Off-axis integrated cavity output spectroscopy method
GB/T 35210.1-2017 Determination methods of methane isothermal adsorption in shale―Part 1:Capacity method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 35210.2-2020 Determination methods of methane isothermal adsorption of shale—Part 2:Gravimetric method

Professional Standard - Non-ferrous Metal

YS/T 987-2014 Test method for measuring carbon containing compound in chlorosilane—Determination of methyldichlorosilane

Taiwan Provincial Standard of the People's Republic of China

CNS 8466-1986 Method for Laboratory Measurement of Sound Transmission Loss
CNS 5091-1986 Method of Laboratory Determination of Moisture Content of Soil

Professional Standard - Electron

SJ 2800-1987 Method for determination of trace methanane in electronic grade gases--Hydrogen flame ionization deteror method

国家能源局

NB/T 10117-2018 Determination methods of methane isothermal adsorption in shale gravimetric method

Professional Standard - Petroleum

SY/T 6712-2008 Laboratiory measurement method of complex resistivity of core sample
SY/T 6132-1995 Volumetric method for determination of methane adsorption in coal rocks

Professional Standard - Machinery

JB/T 8537-2010 Testing method for dust resistivity in lab
JB/T 8537-1997 Laboratory test method of dust specific electric resistance
JB/T 8537-2023 Testing method for dust resistivity in laboratory

Professional Standard - Commodity Inspection

SN 0649-1997 Method for the determination of methyl bromide residues in cereals for export
SN/T 2933-2011 Determination of Chloroform

邯郸市

DB1304/T 333-2020 Detection method of laser methane sensor for coal mines

Beijing Provincial Standard of the People's Republic of China

DB11/T 1367-2016 Determination of methane/total hydrocarbons/non-methane total hydrocarbons in exhaust gas from stationary pollution sources Portable hydrogen flame ionization detector method

Professional Standard - Light Industry

QB/T 2718-2005 Leather -- chemical test -- Determination of matter soluble in dichloromethane
QB/T 2718-2018 Leather. Chemical tests. Determination of matter soluble in dichloromethane

National Metrological Verification Regulations of the People's Republic of China

JJG 677-2006 Verification Regulation of Interference Type Methane Measuring Device

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories

Anhui Provincial Standard of the People's Republic of China

DB34/T 3242-2018 Determination of Dimethoxymethane Content in Gasoline by Gas Chromatography

海关总署

SN/T 5479-2022 Laboratory rapid detection methods for African swine fever

国家发展和改革委员会

MT/T 28-2005 Optical interference methane detector

Professional Standard - Hygiene

WS/T 415-2013 Assessment of laboratory tests when proficiency testing is not available

RU-GOST R

GOST 26239.9-1984 Trichlorsilane. Method of methyl chloride, ethyl chloride, butane, isobutane, methylene, chloroform, carbon tetrachloride, methyltrichlorsilane, chlormethylmethylsilane determination
GOST 28622-2012 Soils. Laboratory method for determination of frost-heave degree
GOST R 59596-2021 Soils. Method of laboratory determination of normal forces of frost heaving
GOST 5180-2015 Soils. Laboratory methods for determination of physical characteristics
GOST R 56353-2015 Soils. Laboratory methods for determination of soil dynamic properties
GOST 23161-1978 Soils. Laboratory method for determination of subsiding characteristics
GOST 23161-2012 Soils. Method of laboratory determination of subsiding characteristics
GOST 22733-2016 Soils. Laboratory method for determining of maximum density
GOST 23740-2016 Soils. Methods of laboratory determination of organic composition
GOST 25584-2016 Soils. Laboratory methods for determination of coefficient of hydraulic conductivity
GOST 34259-2017 Soils. Method of laboratory determination of adhesion (stickiness)
GOST 23740-1979 Soils. Methods of laboratory determination of organic composition
GOST 28622-1990 Soils. Laboratory method for determining of froth-heave degree
GOST R 56726-2015 Soils. Laboratory method for determine the specific tangential forces of frost heaving
GOST 24143-1980 Soils. Laboratory methods for determination of swelling and shrinking characteristics
GOST 8.292-1984 State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification
GOST R ISO 25139-2015 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
GOST 5180-1984 Soils. Laboratory methods for determination of physical characteristics
GOST 25584-1990 Soils. Laboratory methods for determination of filtration factor
GOST 12536-1979 Soils. Methods of laboratory granulometric (grain-size) and microaggragate distribution
GOST 17245-1979 Soils. Method of laboratory determination of temporary resistance for single-exial compression

VN-TCVN

TCVN 4201-2012 Soils.Laboratory methods for determination of compaction characteristics
TCVN 4202-2012 Soils.Laboratory methods for determination of unit weight
TCVN 4195-2012 Soils.Laboratory methods for determination of density
TCVN 6651-2000 Soil quality.Determination of the water-retention characteristic.Laboratory methods
TCVN 4200-2012 Soils.Laboratory methods for determination of compressibility
TCVN 4197-2012 Soils.Laboratory methods for determination of plastic limit and liquid limit
TCVN 3756-1983 Natural gas.Method for the determination of oxygen, nitrogen and methane by gas chromatography
TCVN 4196-2012 Soils.Laboratory methods for determination of moisture and hydroscopic water amount

International Organization for Standardization (ISO)

ISO 5787:1979 Methyl chloride and ethyl chloride for industrial use; Methods of test
ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
ISO 1870:1977 Chloroform for industrial use; List of methods of test
ISO 1869:1977 Methylene chloride for industrial use; List of methods of test
ISO 11274:2019 Soil quality — Determination of the water-retention characteristic — Laboratory methods
ISO 7140:1985 Cross-country skis; Determination of dynamic performance; Laboratory measurement method
ISO 12460-1:2007 Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the 1-cubic-metre chamber method
ISO/IEC GUIDE 43:1984 Development and operation of laboratory proficiency testing
ISO 11274:1998 Soil quality - Determination of the water-retention characteristic - Laboratory methods
ISO 16072:2002 Soil quality - Laboratory methods for determination of microbial soil respiration

British Standards Institution (BSI)

BS 7258-4:1994 Laboratory fume cupboards - Method for determination of the containment value of a laboratory fume cupboard
BS 7258-4:1994(1998) Laboratory fume cupboards — Part 4 : Method for determination of the containment value of a laboratory fume cupboard
BS ISO 11274:1998 Soil quality. Determination of the water retention characteristic. Laboratory methods
BS ISO 11274:1999 Soil quality. Determination of the water-retention characteristic. Laboratory methods
BS ISO 16000-3:2011 Indoor air. Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air. Active sampling method
BS EN ISO 11274:2019 Soil quality. Determination of the water-retention characteristic. Laboratory methods
BS 5598-7:1980 Methods of sampling and test for halogenated hydrocarbons - Methods of test for methyl chloride and ethyl chloride
BS 4309:1968(2011) Methods of Measuring the performance of laboratory electric resistance furnaces
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS EN ISO 25139:2011 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS 4309:1968 Methods of measuring the performance of laboratory electric resistance furnaces
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods

GOST

GOST R 59540-2021 Soils. Standard test methods for degree of salinity content
GOST 23908-1979 Soils. A laboratory method for determination of volume change by oedometer test
GOST R 71038-2023 Soils. Methods for laboratory determination of thermal characteristics
GOST 22733-1977 Soils. A laboratory method for determining maximum density
GOST 12248-1978 Soils. Laboratory methods for determination of shear strength
GOST 25585-1983 Soils. Laboratory method orf determination of suffision compressibility
GOST R 56353-2022 Soils. Laboratory methods for determination of dispersed soil dynamic properties

Natural Gas Processor's Association (NGPA)

GPA RR-17-1976 Smoothed Experimental Enthalpy Data for Three Methane-Ethane Binaries and a Methane-Ethane- Propane Ternary
GPA RR-63-1982 Experimental Enthalpies for Pure Toluene and Pure Methylcyclohexane

HU-MSZT

MNOSZ 6636-1951 Laboratory Butane Igniter
MSZ 3227/1-1980 Wool Testing Methods Laboratory Testing

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.2-2018 Standard Methods for Laboratory Airflow Measurement
ASHRAE 110 ERTA-2016 Methods of Testing Performance of Laboratory Fume Hoods

SCC

BS DD 191:1990 Method for determination of the containment value of a laboratory fume cupboard
DANSK DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
NS-EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
AASHTO T 265-2022 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
AASHTO T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
AMCA 260-20 Laboratory Methods of Testing Induced Flow Fans for Rating
UNE 77312:2000 Soil quality. Determination of the water retention characteristic. Laboratory methods.
AMCA 520-09 Laboratory Methods for Testing Actuators
AASHTO T 265-2015(2019) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
AATCC M10-2018 A Summary of ASTM Methods for Interlaboratory Testing
BS 6095:1981 Methods for determination of the physical properties of laboratory sheets made from pulps
AASHTO T 265-1993(2004) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
NS 8011:1982 Geotechnical testing - Laboratory methods - Density
BS EN ISO 11274:2014 Soil quality. Determination of the water-retention characteristic. Laboratory methods
DANSK DS/ISO 11274:2019 Soil quality – Determination of the water-retention characteristic – Laboratory methods
AATCC M9-1992 A Summary of ASTM Methods for Interlaboratory Testing
AENOR UNE-EN 14727:2006 Laboratory furniture. Container furniture for laboratories. Requirements and test methods.
AMCA 260-13 Laboratory Methods of Testing Induced Flow Fans for Rating
BS 2782-4 METHOD 470B:1991 Methods of testing plastics. Chemical properties-Determination of ash of polyalkylene terephthalates
AS/NZS 4266.16:1995 Reconstituted wood-based panels - Methods of test, Method 16: Determination of formaldehyde (FIRA chamber method)
AASHTO T 288-2012(2021) Standard Method of Test for Determining Minimum Laboratory Soil Resistivity
ASTM Adjunct E691-01 Program to Compute the Within-Lab and Between-Lab Variation of a Test Method from an Interlaboratory Round Robin Study
NS 8013:1982 Geotechnical testing — Laboratory methods — Water content
DANSK DS/EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
AASHTO T 288-1991(2004) Standard Method of Test for Determining Minimum Laboratory Soil Resistivity
UNE-EN 12802:2000 Road markin materials. Laboratory methods for identification.
DANSK DS/EN 12802:2012 Road marking materials - Laboratory methods for identification
NS-EN 12802:2011 Road marking materials — Laboratory methods for identification
NS-EN 12802:2000 Road marking materials — Laboratory methods for identification
BS EN 302-2:1992 Adhesives for load-bearing timber structures: test methods-Determination of resistance to delamination (Laboratory method)
BS 2782-7 METHOD 732E:1991 Methods of testing plastics. Rheological properties-Determination of viscosity number of poly(alkylene terephthalates)
NS 8004:1982 Geotechnical testing - Laboratory methods - Shrinkage limit
NS 8002:1982 Geotechnical testing — Laboratory methods — Fall cone liquid limit

Indonesia Standards

SNI 1744-2012 Metode uji CBR laboratorium
SNI 03-3399-1994 Test method for tensile strength of wood in the laboratories
SNI 07-6217-2000 Testing methods of metal laboratory corrosion
SNI 03-3960-1995 Test method for modulus of bending elasticity of wood in laboratories
SNI 03-3400-1994 Test method for friction strenght of wood in laboratories.
SNI 03-3959-1995 Test method for bending strength of wood in laboratories

AENOR

UNE 103502:1995 TEST LABORATORY METHOD FOR DETERMINING IN A SOIL THE C.B.R. INDEX.
UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods

TR-TSE

TS 1838-1975 METHYLENE CHLORIDE (DICHLOROMETHANE) FOR INDUSTRIAL USE METHODS OF TEST

CZ-CSN

CSN 72 1010-1989 Determination of earth volume mass. Laboratory and field methods
CSN ISO 7140:1993 Cross-country skis. Determination of dynamic performance. Laboratory measurement method
CSN 72 1015-1988 Laboratory determination of com- pactibility of soils

American Society for Testing and Materials (ASTM)

ASTM D6902-03 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D6902-04 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D6902-04e1 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D6843-10 Standard Test Method for Silanes Used in Rubber Formulations
(bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
ASTM D2216-71 Standard Method of Laboratory Determination Of Moisture Content Of Soil
ASTM D6902-04(2023) Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D6902-04(2017) Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D6902-04(2011) Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D5320-96 Standard Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene
ASTM E2963-16 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
ASTM E691-21 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-22 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D4007-02(2006) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D969-85(2003) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM C1068-21 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM E2963-22 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
ASTM D4007-08 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11(2016)e1 Standard test method for determination of water and sediment in crude oil by centrifugation (laboratory method)
ASTM D4007-81(1995)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM E1938-13 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
ASTM D4457-85(1996)e1 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
ASTM D584-10 Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
ASTM D4457-02 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
ASTM E691-18 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-05 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-20 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-19e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-19 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D4016-08 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
ASTM E691-99 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E2963-15 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
ASTM E691-11 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-08 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D7778-15(2022)e1 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM C1068-03 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C1068-03(2011) Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D6741-10(2015) Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
ASTM E1938-08 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometry
ASTM D1108-21 Standard Test Method for Dichloromethane Solubles in Wood ^,
ASTM D4575-09(2019) Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D4575-09 Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM E596-96(2002)e1 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E691-09e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
ASTM E1938-02 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
ASTM E1938-97 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method

Lithuanian Standards Office

LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods

European Committee for Standardization (CEN)

CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN ISO 16072:2011 Soil quality - Laboratory methods for determination of microbial soil respiration
EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)

BE-NBN

NBN T 04-436-1983 Methylene chloride for industrial use- List of methods of test
NBN B 16-515-1985 Determination of efficiency limits against Rhinotermes spp. (laboratory method)
NBN B 16-501-1977 Determination of preventive efficacy against brown mealybugs (laboratory method)
NBN B 16-514-1985 Determination of efficiency limits against Rhinotermes spp. (laboratory method)

Danish Standards Foundation

DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
DS/ISO 11274/Corr. 1:2009 Soil quality - Determination of the water-retention characteristic - Laboratory methods
DS/ISO 11274:1999 Soil quality - Determination of the water-retention characteristics - Laboratory methods
DS/EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography

GSO

BH GSO 2144:2012 Test methods of Laboratory Filter Papers
OS GSO 2144:2011 Test methods of Laboratory Filter Papers
GSO 2144:2011 Test methods of Laboratory Filter Papers
BH GSO ISO 7140:2017 Cross-country skis -- Determination of dynamic performance -- Laboratory measurement method
BH GSO ISO 11274:2016 Soil quality -- Determination of the water-retention characteristic -- Laboratory methods
OS GSO ISO 11274:2013 Soil quality -- Determination of the water-retention characteristic -- Laboratory methods
GSO ISO 11274:2013 Soil quality -- Determination of the water-retention characteristic -- Laboratory methods
OS GSO ISO 7140:2016 Cross-country skis -- Determination of dynamic performance -- Laboratory measurement method
BH GSO ISO 25139:2017 Stationary source emissions -- Manual method for the determination of the methane concentration using gas chromatography
GSO ISO 7140:2016 Cross-country skis -- Determination of dynamic performance -- Laboratory measurement method
OS GSO ISO 25139:2015 Stationary source emissions -- Manual method for the determination of the methane concentration using gas chromatography
GSO ASTM D8183:2023 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
BH GSO ASTM D8183:2023 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
GSO ISO/TR 24430:2007 Paints and varnishes – Guidelines for the determination of the Precision of a test method by interlaboratory trials

American National Standards Institute （ANSI)

ANSI/ASTM D3443:2000 Test Method for Chloride in Trichlorotriflouroethane
ANSI/AMCA 240-1996 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 240-2006 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/ASTM D3447:2000 Test Method for Purity of Trichlorotrifluoroethane
ANSI/AMCA 260-2013 Laboratory Methods of Testing Induced Flow Fans for Rating
AMCA 260-07 Laboratory Methods of Testing Induced Flow Fans for Rating
ANSI/ASTM D3444:2000 Test Method for Total Acid Number of Tricholorotriflourethane
ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
AMCA 210-74 Laboratory Methods of Testing Fans for Ratings
ANSI/ASHRAE 110-2016 Methods of Testing Performance of Laboratory Fume Hoods
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories
ANSI/ASTM D3448:1985 Test Method for Specific Aqueous Conductance of Trichlorotrifluorethane
ANSI/AMCA 500-L-2015 Laboratory Methods of Testing Louvers for Rating

GOSTR

GOST 34467-2018 Soils. Laboratory methods for determination of calcium carbonate content
GOST 34276-2017 Soils. Methods of laboratory determination of the specific resistance to penetration
GOST R 58327-2018 Soils. Laboratory method for determining parameters of relaxation

IN-BIS

IS 2720 Pt.16-1979 Soil Test Methods Part XVI Laboratory Determination of CBR
IS 11818-1986 Test method for laboratory determination of air permeability of building joints
IS 10782-1983 Laboratory determination method of dynamic modulus of core samples
IS 2720 Pt.17-1986 Soil Testing Methods Part 17 Laboratory Determination of Permeability
IS 9331-1979 Laboratory method for determining the elastic properties of alpine skis
IS 12634-1989 Rock joints—Direct shear strength—Laboratory determination methods

AASHTO - American Association of State Highway and Transportation Officials

T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 288-1991 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity
T 288-2012 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity

NO-SN

NS 8011-1982 Geotechnical testing - Laboratory methods - Density
NS 8013-1982 Geotechnical testing - Laboratory methods - Water content
NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit

Association Francaise de Normalisation

NF EN ISO 25139:2011 Emissions from stationary sources - Manual method for the determination of methane concentration by gas chromatography
NF X43-356*NF EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography.
NF U43-129:1977 AGROPHARMACEUTICAL PRODUCTS. CHLOROPICRIN. TEST METHODS.
NF X31-551*NF EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods
NF ISO 7140:1994 Cross-country skis - Determination of dynamic performance - Laboratory measurement method
NF G06-019:1971 Determination of the dichloromethane extract in a mesch of combed wool.
NF EN ISO 11274:2019 Soil quality - Determination of water retention characteristic - Laboratory methods
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF EN 12802:2012 Road marking products - Laboratory methods for identification
NF EN ISO 25140:2010 Emissions from stationary sources - Automatic method for the determination of methane concentration by flame ionization detection (FID)
NF ISO 3074:2014 Wool - Method for determining the dichloromethane extract in a sliver of worsted wool
NF EN ISO 16072:2011 Soil quality - Laboratory methods for the determination of soil microbial respiration

ES-UNE

UNE-EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)
UNE-EN ISO 16072:2011 Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002) (Endorsed by AENOR in August of 2011.)

German Institute for Standardization

DIN EN ISO 11274:2020-04 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019); German version EN ISO 11274:2019
DIN EN 12802:2011-12 Road marking materials - Laboratory methods for identification; German version EN 12802:2011 / Note: To be replaced by DIN EN 12802 (2018-12).
DIN V 55394-1:2000 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes (ISO/IEC Guide 43-1:1997)
DIN 12876-3:2001 Electrical laboratory devices - Laboratory circulators and baths - Part 3: Determination of ratings of laboratory baths

The American Road & Transportation Builders Association

AASHTO T 265-2015(R2019) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
AASHTO T 265-2015 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
AASHTO T 288-2012(R2016) Standard Method of Test for Determining Minimum Laboratory Soil Resistivity

Korean Agency for Technology and Standards (KATS)

KS F 2312-2022 Test method for soil compaction in laboratory
KS I ISO 25139-2023 Stationary source emissions — Manual method for the determination of the methane concentration using gas chromatography
KS F 2312-1986 Test method for soil compaction in laboratory
KS G ISO 7140:2004 Cross－country skis－Determination of dynamic performance－Laboratory measurement method
KS I ISO 25139-2013(2018) Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
KS G ISO 7140:2019 Cross－country skis－Determination of dynamic performance－Laboratory measurement method
KS I ISO 16072:2009 Soil quality－Laboratory methods for determination of microbial soil respiration
KS I ISO 11274:2005 Soil quality－Determination of the water retention characteristic(Laboratory method)
KS I ISO 11274:2021 Soil quality — Determination of the water-retention characteristic — Laboratory methods

PL-PKN

PN P04600-1991 Textiles. Determination of the precision of test methods by inter-laboratory tests

API - American Petroleum Institute

API REPORT 83-50-1985 Interlaboratory and Intralaboratory Comparision of the API Drilling Fluids Bioassay Protocol

AT-ON

ONORM S 4250-1991 Tennis rackets - Concepts, laboratory measurement methods
ONORM S 4022-1977 Alpine ski; elastic properties; laboratory measurement methods
ONORM S 4071-1981 Cross country skis; elastic properties; laboratory measurement methods
ONORM S 1811-2001 Testing of textiles - Quantitative analysis of binary mixtures - Triacetae fibres with other fibres - Dichlormethane (methylene chloride) method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 110-2016 Methods of Testing Performance of Laboratory Fume Hoods
ASHRAE 110 INT 1-2011 Method of Testing Performance of Laboratory Fume Hoods
ASHRAE 68-1997 Laboratory Method of Testing to Determine the Sound Power in a Duct (AMCA 330-97)
ASHRAE 51-1985 Laboratory Methods of Testing Fans for Rating (AMCA Standard 210-85)

Japanese Industrial Standards Committee (JISC)

JIS K 6558-4:2016 Leather -- Chemical tests -- Determination of matter soluble in dichloromethane or hexane
JIS Z 8405:2021 Statistical methods for use in proficiency testing by interlaboratory comparison
JIS Z 8405:2008 Statistical methods for use in proficiency testing by interlaboratory comparisons

KR-KS

KS G ISO 7140-2019 Cross－country skis－Determination of dynamic performance－Laboratory measurement method
KS V 8891-2023 Laboratory test method for skin friction of antifouling paints by rotating drum
KS I ISO 11274-2021 Soil quality — Determination of the water-retention characteristic — Laboratory methods

Standard Association of Australia （SAA）

AS/NZS 3580.11.1:2013 Ambient air sampling and analysis methods Direct-reading instrument method for determination of methane and non-methane organic compounds in ambient air

DIN

DIN ISO 11274:2001 Soil quality - Determination of the water retention characteristics - Laboratory methods (ISO 11274:1998)

CEN - European Committee for Standardization

PREN 12802-2018 Road marking materials - Laboratory methods for identification

Others: Chloroform Determination Method,Chloroform Determination Method,Chloroform Determination Method,Chloroform Determination Method,Shale Methane Isothermal Adsorption Determination Method,Methane manual determination method,Methane manual determination method,Laboratory method,Determination method of air quality methane,Determination method for methane determination,laboratory fat determination method,Determination method of dichloromethane in water,Methane Determination Method,Determination method of total non-methane hydrocarbons,Methane Determination Method,Determination method of dichloromethane in water,Determination method of dichloromethane,Determination method of dichloromethane,How to measure fat in the laboratory,Determination method of dichloromethane