Pipe stress testing

Pipe stress testing, Total:228 items.

The international standard classification for "Pipe stress testing" includes: Pipeline components and pipelines in general , Pipeline components and pipelines , Glass in general , Pressure vessels, gas cylinders .

The Chinese standard classification for "Pipe stress testing" includes: Petroleum and gas gathering and transportation , Pressure vessel , Basic standard and general method , Industrial technical glass , Power station engineering , Technical Management , Braking system .

Group Standards of the People's Republic of China

T/GDAQI 011-2019 Magnetic Memory Testing Method for Stress of Overground Metal Pipeline
T/CTS 6-2022 Taxonomy of traffic control facilities for road testing and demonstration application of intelligent and connected vehicle
T/CPSI 05301-2024 Specification for emergency capability assessment of oil and gas pipeline enterprise

未注明发布机构

DIN EN ISO 13257 E:2017-04 Test method for high temperature cycling resistance of thermoplastic piping systems for non-pressure applications (draft)
DIN EN ISO 13254 E:2017-04 Test method for water tightness of thermoplastic piping systems for non-pressure applications (draft)
DIN EN ISO 3501:2022 Plastic piping systems – Mechanical connections between fittings and pressure pipes – Testing resistance to tensile load at constant tensile force (ISO 3501:2021)
AS 4041:2006(R2016) Pressure piping
DIN EN ISO 13257 E:2018-03 Test method for high temperature cycling resistance of thermoplastic piping systems for non-pressure applications (draft)
DIN 86001 E:2007-07 Pipelines on ships - Pressure ratings, pressure tests

Yunnan Provincial Standard of the People's Republic of China

DB53/T 811-2016 Technical specification for detection of grouting density of bridge prestressed pipelines

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36676-2018 External inspection methodology of stress corrosion cracking(SCC)forburied steel pipelines
GB/T 38942-2020 Pressure piping code—Utility piping
GB/T 20801.5-2020 Pressure piping code - Industrial piping - Part 5: Inspection and testing

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16805-2009 Pressure testing of liquid petroleum pipelines
GB/T 18144-2000 Test method for measurement of stress in glass
GB/T 16805-1997 Pressure testing of liquid petroleum pipelines
GB/T 38719-2020(英文版) Metallic materials Tube Determination of biaxial stress strain curve of tube by hydro bulging test
GB/T 20801.5-2006 Pressure Piping Code – Industrial Piping-Part 5: Inspection and Testing
GB/T 32270-2015 Pressure piping code―Power piping
GB/T 32270-2024 Pressure piping code—Power piping

Professional Standard - Electricity

DL/T 5366-2014 Technical code for stress calculating of steam/water piping in fossil fuel power plant
DL/T 5366-2006 Technical Code for Stress Calculating of Steam/water

Hebei Provincial Standard of the People's Republic of China

DB13/ 48-1991 Heat pipe insulation monitoring

Professional Standard - Water Conservancy

SL 702-2015 Technical specifications of prestressed concrete cylinder pipe

Anhui Provincial Standard of the People's Republic of China

DB34/T 727-2018 Inspection regulations for urban natural gas buried steel pressure pipelines (direct detection)

Professional Standard - Electron

SJ/T 10936-1996 Method of measurement for residue stress in color picture tube bulbs

Professional Standard - Recommended Standards for Engineering Construction

CECS 329-2012 Technical specification for steelring prestressed concrete pipeline engineering
CECS 140-2011 Specification for structural design of buried prestressed concrete pipeline and prestressed concrete cylinder pipeline of water supply and sewerage engineering
CECS 140-2002 Specification for structural design of buried prestressed concrete pipeline of water aupply and sewerage engineering

Professional Standard - Railway

TB/T 2979-2000 Resistance Test for Brake Pipe of Railway Freight Car

Chongqing Provincial Standard of the People's Republic of China

DB50/T 04-1997 Thermal pipeline energy conservation monitoring regulations
DB50/T 04-2016 Energy-saving monitoring method of thermal pipeline

国家铁路局

TB/T 2488-2017 Track inspection-Testing method for ballast bed strain and vibration

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34275-2017 Pressure piping code―Long-distance pipeline

Professional Standard - Special Equipment Specification

TSG D7002-2006 Pressure Piping Components Type Test Regulation

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE OR-05-13-1-2005 Detecting Critical Supply Duct Pressure
ASHRAE 120-2017 Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings

SCC

AS 4130(INT):1993 PE pipes, pressure applications
AS 1159:1988 Polyethylene pipes for pressure applications
DIN 86001 E:2007 Draft Document - Pipelines on ships - Pressure ratings, pressure tests
BS 8010-2.4:1988 Code of practice for pipelines. Pipelines on land: design, construction and installation-Prestressed concreted pressure pipelines
NS-EN ISO 13254:2017 Thermoplastics piping systems for non-pressure applications — Test method for watertightness (ISO 13254:2010)
AS/NZS 1477:1999 PVC pipes and fittings for pressure applications
DANSK DS/EN 1053:1996 Plastics piping systems – Thermoplastics piping systems for non-pressure applications – Test method for watertightness
NZS 7648:1987 Unplasticized PVC pipe and fittings for pressure applications
AS 1477.1:1988 Unplasticized PVC (UPVC) pipes and fittings for pressure applications - Pipes
BS CP 2010-5:1974 Code of practice for pipelines.-Design and construction of prestressed concrete pressure pipelines in land
NS-EN 1053:1995 Plastics piping systems — Thermoplastics piping systems for non-pressure applications — Test method for watertightness
ASME B31J-2008(R2013) Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components
AS/NZS 4129(INT):1997 Fittings for polyethylene (PE) pipes for pressure applications
AS 1477.1:1973 Unplasticized PVC (UPVC) pipes and fittings for pressure applications (metric units) - UPVC pipes for pressure applications
NS-EN 642:1994 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes
AS CB18.1 INT 1:1971 Design, fabrication, installation and inspection of pressure piping (known as the SAA Pressure Piping Code) - Interpretations to SAA Pressure Piping Code No 1 (October 1971) - Application of AS 1074 pipe for pressure piping
AS 2977.1:1988 Unplasticized PVC (UPVC) pipes for pressure applications - Compatible with cast iron pipe outside diameters - Pipes
AENOR UNE-EN 642:1995 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes
DANSK DS/ISO 17454:2006 Plastics piping systems - Multilayer pipes - Test method for the adhesion of the different layers using a pulling rig
NS-EN ISO 13257:2018 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
NS 3551:1986 Testing tightness of pressure pipes, sewers and manholes by means of water
AENOR UNE-EN 1053:1996 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
AS 3707:1989 Method for testing pressure cycling resistance of pipes and fittings
DIN EN ISO 13254 E:2017 Draft Document - Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010); German and English version prEN ISO 13254:2017
CAN/CSA-B137.8-M92-1992 Polybutylene (PB) Piping for Pressure Applications
AWWA ACE91183 Pipeline Design Lessons of Recent Prestressed Concrete Pressure Pipe Failures
AS 1978:1977 Rules for the field pressure testing of gas and liquid petroleum land or submarine pipelines known as the SAA Code for Field Pressure Testing of Pipelines
AS 4441(INT):1996 Oriented PVC (OPVC) pipes for pressure applications
AS/NZS 4130:1997 Polyethylene (PE) pipes for pressure applications
CSA B137.8-1999 Polybutylene (PB) Piping for Pressure Applications
AS/NZS 4441(INT):1996 Oriented PVC (OPVC) pipes for pressure applications
CAN 3-B137.8-M86-1986 Polybutylene (PB) Piping for Pressure Applications
AS/NZS 4130:2001 Polyethylene (PE) pipes for pressure applications
NS-EN ISO 13257:2017 Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling (ISO 13257:2010)
DANSK DS/EN ISO 13257:2018 Thermoplastics piping systems for non-pressure applications – Test method for resistance to elevated temperature cycling (ISO 13257:2018)
AS 3518.1:1988 Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes
DIN EN 1445 E:1994 Draft Document - Fibre-cement pipelines; field pressure testing; German version prEN 1445:1994
BS 5911-103:1994 Precast concrete pipes, fittings and ancillary products-Specification for prestressed non-pressure pipes and fittings with flexible joints
DANSK DS/ISO 20632:2008 Reaction-to-fire tests - Small room test for pipe insulation products or systems
ASSP A10.35-2020 Safety Requirements for Pressure Testing Steel and Copper Piping Systems
BS ISO 8584-1:1990 Thermoplastics pipes for industrial applications under pressure. Determination of the chemical resistance factor and of the basic stress-Polyolefin pipes
DIN EN ISO 13257 E:2018 Draft Document - Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO/DIS 13257:2018); German and English version prEN ISO 13257:2018
AS 1477.5:1973 Unplasticized PVC (UPVC) pipes and fittings for pressure applications - Solvent-welding joints for UPVC pressure pipes and fittings
DANSK DS/ISO 23949:2023 Plastics – Application of spread of flame test to plastic pipes
AS 4041:1992 Pressure piping
AS 4041:1998 Pressure piping
ASME B31.1-2018 Power Piping
DANSK DS/EN 642:1995 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
AS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications
BS BIP 2093:2005 Taking the temperature: ethical supply chain management
AS 3517:1995 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS 3517:1987 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AENOR UNE-EN ISO 13257:2018 Pipeline systems in thermoplastic materials for non-pressure applications. Cyclic resistance test method at elevated temperature. (ISO 13257:2010).

German Institute for Standardization

DIN 86001:2010-09 Pipelines on ships - Pressure ratings, pressure tests
DIN EN ISO 13254:2018-01 Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010); German version EN ISO 13254:2017
DIN EN ISO 13257:2019-04 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018); German version EN ISO 13257:2018
DIN EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method; German version EN 1411:1996
DIN EN 642:1994-12 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes; German version EN 642:1994
DIN EN ISO 13254:2018 Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
DIN 86001:2010 Pipelines on ships - Pressure ratings, pressure tests
DIN 86001:1997 Pipelines on ships - Pressure ratings, tests
DIN EN ISO 13257:2019 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
DIN EN ISO 13257:2018 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010)

FI-SFS

SFS 2897-1980 Natural Gas Pipeline. pressure test

American Welding Society (AWS)

WRC 360:1991 Stress Indices, Pressure Design And Stress Intensification Factors For Laterals In Piping
WRC 367:1991 Basis Of Current Dynamic Stress Criteria For Piping

ES-UNE

UNE-EN ISO 13254:2018 Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
UNE-EN ISO 13257:2020 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)

GM Europe

GME 14018-2007 Testing the Force Fit of Pipe Connections of Exhaust System Pipes (English/German; Note: This specification may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14449.)

RU-GOST R

GOST R 52890-2007 Non-destructive testing. Evaluation of stresses in material of pipelines by ultrasound. General requirements
GOST 32388-2013 Process piping. Standard for the stress, vibration and seismic analysis

CH-SNV

SN ISO 105/X09:1984 pipeline. Ferrous metal piping notes and guidelines. Rated pressure; working pressure; test pressure

HU-MSZT

MSZ 10906/18.lap-1966 Electrical pipelines. Power mark measurement mode. Network power pipeline measurement
MSZ 10906/22-1969 Electrical pipeline power mark measurement mode. glow pipe
MSZ 2873-1986 Pipe surface, operating and test pressures
MSZ 2509/2-1987 Sidewalk load-bearing capacity test CBR test
MSZ 10906/25-1972 Electrical pipelines. Electrical mark measurement mode. Non-electrical measurements

Standard Association of Australia （SAA）

AS 4176.3:2010 Multilayer piping for pressure applications Multilayer piping system fittings for hot and cold water piping applications (ISO 21003-3: 2008 MOD)
AS 4176.1:2010 Multi-layer piping for pressure applications Multi-layer piping systems for hot and cold water piping applications General (ISO 21003-1: 2008 MOD)
AS 4176.2:2010 Multilayer piping for pressure applications Multilayer piping system piping for hot and cold water piping applications (ISO 21003-2: 2008 MOD)
AS/NZS 3707:2001 Method for testing pressure cycling resistance of pipes and fittings
AS 4176.5:2010 Multi-layer piping for pressure applications Multi-layer piping systems for hot and cold water piping applications System suitability (ISO 21003-5: 2008 MOD)
AS/NZS 4129:2020 Fittings for polyethylene (PE) pipes for pressure applications
AS 4176.7:2010 Multilayer piping for pressure applications Conformity assessment of multilayer piping systems for hot and cold water piping applications (ISO/TS 21003-7: 2008 MOD)
AS/NZS 4130:2009 Polyethylene (PE) pipe for pressure applications
AS/NZS 4130:2018 Polyethylene (PE) pipes for pressure applications
AS/NZS 1477:1996 PVC pipes and fittings for pressure applications
AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
AS/NZS 2885.5:2012 Pipelines - Gases and Liquid Petroleum - Field Pressure Testing
AS/NZS 1462.11:1996 Methods of test for PVC pipes and fittings - Method for high temperature stress-relief testing of fittings
AS/NZS 4765:2017 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 1462.10:1998 Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications
AS 5200.053:2008 Plumbing and Drainage Products Stainless steel pipes and tubes for pressure applications
AS 4041:2006 Pressure piping
AS 3517:2007 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications

PT-IPQ

NP 520-1988 Asbestos-cement pressure pipes Watertightness test
NP 3858-1991 Asbestos-cement pipes Field pressure testing
NP EN 642-2001 Prestressed concrete pressure pipes,cylinder and non-cylinder,including joints,fittings and specific requirements for prestressing steel for pipes
NP 1071/3-1985 Electric power pipeline engineering and telecommunications pipeline systems. Part 2: Special requirements and tests. Metal rigid pipe with smooth inner wall

CZ-CSN

CSN 05 1161-1985 Pressure test on welded joints of pipeline and pressure vessels from plastics
CSN 13 7602-1989 Compression couplings for tubes. Technical requirements and test methods
CSN 75 5911-1995 Prcssurc tests of water and irrigation pipelines
CSN 73 6611-1983 Pressure tests for water and irrigation pipelines
CSN 30 0507-1972 Motor vehicle road durability test

IN-BIS

IS 784-1978 Specification for prestressed concrete piping (including fittings)

Lithuanian Standards Office

LST EN 642-2000 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes
LST EN 1053-2002 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness

Danish Standards Foundation

DS/EN 642:1995 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
DS/EN 1053:1996 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
DS/ISO 20632:2008 Reaction-to-fire tests - Small room test for pipe insulation products or systems

British Standards Institution (BSI)

ASME B31.J-2008 Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components
BS EN 642:1995(2004) Prestressed concrete pressure pipes, cylinder and non - cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
BS EN ISO 13254:2017(2018) Thermoplastics piping systems for non - pressure applications - Test method for watertightness
BS EN 744:1996 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
BS EN 15882-1:2011+A1:2017 Extended application of results from fire resistance tests for service installations - Ducts
ASME B31.1-2022 Power Piping
BS EN 642:1995 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
BS IEC 62880-1:2017 Semiconductor devices. Stress migration test standard - Copper stress migration test standard
BS ISO 13257:2010 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
BS EN ISO 13254:2017 Thermoplastics piping systems for non-pressure applications. Test method for watertightness

American Society of Mechanical Engineers (ASME)

ASME B31J-ES (SPANISH)-2008 Standard measurement method to determine escalation intensification factors (Factores i) for metal tube components
ASME B31 J-2008 Standard Test Method Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components
ASME A112.18.1-1971 Plumbing Supply Fittings
ASME A112.18.1-1989 Plumbing Supply Fittings
ASME STP-PT-028-2009 IMPACT TESTING EXEMPTION CURVES FOR LOW TEMPERATURE OPERATION OF PRESSURE PIPING
ASME A112.18.1-1979 Plumbing Supply Fittings
ASME B31.1-2007 Power Piping
ASME B31.1-2020 Power Piping
ASME B31.1-1983 Power Piping
ASME B31.1-1951 Power Piping
ASME B31.1-2010 Power Piping
ASME B31.1-2012 Power Piping (B31.1 - 2012)
ASME B31.1-1977 Power Piping
ASME B31.1-2016 Power Piping
ASME B31.1-2014 Power Piping (B31.1 - 2014)
ASME B31.1-1973 Power Piping
ASME B31.1-1967 Power Piping
ASME B31.1-1986 Power Piping
ASME B31.1-1955 Power Piping

AENOR

UNE 60670-8:2014 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 8: Pressure tightness tests for receiving installation pipework
UNE-EN 1053:1996 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
UNE-EN 12106:1998 PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) PIPES. TEST METHOD FOR THE RESISTANCE TO INTERNAL PRESSURE AFTER APPLICATION OF SQUEEZE-OFF.
UNE-EN 642:1995 PRESTRESSED CONCRETE PRESSURE PIPES, CYLINDER AND NON-CYLINDER, INCLUDING JOINTS, FITTINGS AND SPECIFIC REQUIREMENT FOR PRESTRESSING STEEL FOR PIPES.
UNE 60670-9:2014 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 9: Previous tests of the supply and commissioning

GSO

GSO ISO 17454:2013 Plastics piping systems - Multilayer pipes - Test method for the adhesion of the different layers using a pulling rig
GSO ISO 13254:2013 Thermoplastics piping systems for non-pressure applications -- Test method for watertightness
GSO ISO 20632:2013 Reaction-to-fire tests -- Small room test for pipe insulation products or systems
BH GSO ISO 13254:2016 Thermoplastics piping systems for non-pressure applications -- Test method for watertightness
GSO ISO 13257:2013 Thermoplastics piping systems for non-pressure applications -- Test method for resistance to elevated temperature cycling
OS GSO ISO 20632:2013 Reaction-to-fire tests -- Small room test for pipe insulation products or systems
GSO ISO 19899:2013 Plastics piping systems - Polyolefin pipes and mechanical fitting assemblies - Test method for the resistance to end load (AREL test)
BH GSO ISO 13257:2016 Thermoplastics piping systems for non-pressure applications -- Test method for resistance to elevated temperature cycling

American National Standards Institute （ANSI)

ANSI/ASTM F2807:2013 Specification for Multuilayer Polyethylene-Polymide (PE-PA) Pipe for Pressure Piping Applications
ANSI/ASME B31J-2008 Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components
ANSI/ASME B31.1-2012 Power Piping
ANSI/ASHRAE 120-2008 Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings
ANSI/ASHRAE 120-2017 Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings

WRC - Welding Research Council

BULLETIN 367-1991 BASIS OF CURRENT DYNAMIC STRESS CRITERIA FOR PIPING
BULLETIN 360-1991 STRESS INDICES@ PRESSURE DESIGN AND STRESS INTENSIFICATION FACTORS FOR LATERALS IN PIPING
BULLETIN 198-1974 SECONDARY STRESS INDICES FOR INTEGRAL STRUCTURAL ATTACHMENTS TO STRIAGHT PIPE; STRESS INDICES AT LUG SUPPORTS ON PIPING SYSTEMS

Association Francaise de Normalisation

NF EN ISO 13254:2017 Thermoplastic piping systems for non-pressure applications - Water tightness test method
NF EN 802:1994 Plastic Pipe and Duct Systems - Thermoplastic Injection Molded Pipe Fittings with Pressure - Maximum Crush Strain Test Method
NF T54-901*NF EN ISO 13254:2017 Thermoplastics piping systems for non-pressure applications - Test method for watertightness
NF T54-078:1992 Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.
NF EN ISO 13257:2018 Thermoplastic piping systems for non-pressure applications - Test method for resistance to high temperature cycling
NF EN 15092:2008 Robinetterie des bâtiments - Vannes mélangeuses en ligne d'alimentation en eau chaude - Essais et exigences

RO-ASRO

STAS 2250-1973 Pipe components NOMINAL PRESSURES, TEST PRES- SURES AND MAXIMUM ADMISSI- BLE WORKING PRESSURES
STAS SR ISO 3459:1995 Polyethylene (PE) pressure pipes - Joints assembled with mechanical fittings -Internal under-pressure test method and requirement
STAS 6718-1985 Tests of metals TENSILE TESTING OF TUBES

AT-ON

ONORM M 3036-1983 Eddy current testing of pipes as replacement for the pressure-tightness-test
ONORM B 2538 Teil.2-1987 Long-distance and district-supply pipelines in water supply Systems; pipe-laying and testing for leaks
ONORM B 5071-1995 Pipes, pressure pipes and fittings of reinforced concrete - Requirements, testing and quality control -Markina of conformitv

PL-PKN

PN M34503-1992 Gas pipelines. Test of gas pipelines
PN S47033-1990 Road vehicles Elastic hoses for hydraulic brakesRe?uirements and tests

National Association of Corrosion Engineers (NACE)

NACE RP0100-2004 Cathodic Protection of Prestressed Concrete Cylinder Pipelines

International Organization for Standardization (ISO)

ISO 13257:2018 Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
ISO 23228:2011 Thermoplastics pipes for the conveyance of fluids - Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens

GOSTR

GOST 34437-2018 Pipeline valves. Technique of the experimental determination of hydraulic and cavitation characteristics

CEN - European Committee for Standardization

PREN 15014-2014 Plastics piping systems - Buried and above ground piping components for water under pressure - Requirements and test/assessment methods for pipes and fittings
PREN 15013-2014 Plastics piping systems - Non-pressure drainage and sewerage piping components buried in ground - Requirements and test/assessment methods for pipes and fittings

API - American Petroleum Institute

API RP 1110-1981 RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF LIQUID PETROLEUM PIPELINES (Second Edition)

SE-SIS

SIS SMS 1230-1975 Pipeline systems. Nominal pressure, PN. Working pressure. Test pressure

GOST

GOST R 70369-2022 Calculation and strength testing. Evaluation of flexural stresses in linear part of trunk pipelines by acoustoelastic methods. General requirements
GOST 356-1968 Conditional, test and working pressures for fittings and connecting parts of pipelines