Heat treatment energy efficiency

Heat treatment energy efficiency, Total:431 items.

The international standard classification for "Heat treatment energy efficiency" includes: Heat treatment and coating , Energy and heat transfer engineering in general , Solar energy engineering , Electric heaters , Water for industrial use , Industrial automation systems , Gases for industrial application .

The Chinese standard classification for "Heat treatment energy efficiency" includes: Heat treatment , Technical management , Solar energy , Paper manufacturing machinery in general , Household electric heating appliances , Technical management , Basic standards and general methods for water treatment agent , Industrial automation and control device in general , Industrial gas and chemical gas , Process oil , Postal code, postal hub internal technological process .

Group Standards of the People's Republic of China

T/CHTA 006-2020 Energy efficiency limit value, energy efficiency grade and energy saving measures of vacuum heat treatment equipment
T/CAS 253-2016 Electronic water heater with the water treatment functions
T/CAQI 187-2021 Calculation method for energy efficiency of wastewater biological treatment system
T/QGCML 2386-2023 Heat treatment oil filter rack
T/CIET 605-2024 Electronic special gas high efficiency and low energy consumption waste gas treatment system
T/CAQI 184-2021 Evaluation indicator system for effectiveness of water treatment facilities membrane distillation water treatment facility

机械工业部

JB/T 6049-1992 Determination of effective heating zone of heat treatment furnace

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9452-2003 Testing method for work zone of heat treatment furnace
GB/T 22561-2008 Vacuum heat treatment
GB/T 9452-2023 Test method for qualified work zone of heat treatment furnace
GB/Z 18718-2002 Energy saving directives for heat treatment
GB/T 15318-1994 Monitoring and testing method for energy saving of electroheat furnace in industrial heat treating
GB 30721-2014 Minimum allowable values of the energy efficiency and energy efficiency grades for water-source（ground-source）heat pumps
GB/T 15318-2010 Monitoring and testing for energy saving of heat treatment electric furnace
GB 29541-2013 Minimum allowable values of the energy efficiency and energy efficiency grades for heat pump water heaters
GB/T 22561-2023 Vacuum heat treatment
GB 19577-2024 Minimum allowable values of the energy efficiency and energy efficiency grades for heat pumps and water chillers
GB/T 24562-2009 Monitoring and testing for energy saving of fuel heat treatment furnace
GB/T 17031.1-1997 Effects of dry heat on textile fabrics at low pressure Part 1: Dry heat treatment procedures for fabrics
GB 29541-2013(英文版) Minimum allowable values of the energy efficiency and energy efficiency grades for heat pump water heaters
GB 21519-2008 Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Electrical Storage Water Heaters
GB/T 21736-2008 Technical specifications of energy-saving combustion devices for heat treating
GB 26969-2011 Minimum allowable values of energy efficiency and energy efficiency grades for domestic solar water heating systems
GB/T 9452-2012 Testing method for working zone of heat treatment furnace

Professional Standard - Light Industry

QB/T 5679-2022 The maximum allowable values of energy consumption and energy efficiencygrade for drinking water treatment equipment
QB/T 4978-2016 Minimum allowable values of energy efficiency and energy efficiency grades for blankets and pads
QB/T 1927.7-1993 Calculation Method for Energy Balance and Thermal Efficiency of Wastepaper Processing System

Professional Standard - Machinery

JB/T 50182-1999 Tank Type Versatile Heat Treatment Furnace. Grading of Energy Consumption (Only for Internal Use)
JB/T 9210-1999 Vacuum heat treatment
JB/T 5652-1991 Electroheat Bath Furnace for Heat Treatment of Projectile Body and Cartridge Case. Grading of Energy Consumption
JB/T 5701-1991 Roller-hearth Type Heat Treatment Furnace. Grading of Energy Consumption
JB/T 50163-1999 Well Type Resistance Furnace for Heat Treatment. Grading of Energy Consumption
JB/T 14154-2023 Energy efficiency limits and energy efficiency grades of blowers for sewage treatment
JB/T 5653-1991 Electric Heating Lead Bath Furnace for Heat Treatment. Grading of Energy Consumption
JB/T 9202-1999 Salts for heat treatment
JB/T 5645-1991 Push Rod Heat Treatment Resistance Fuel Furnace. Grading of Energy Consumption
JB/T 50164-1999 Electroheat Bath Furnace for Heat Treatment
JB/T 50154-1999 Heat treatment furnace. Grading of energy consumption (only for internal use)
JB/T 9202-2004 Salts for heat treatment
JB/T 5644-1991 Push Rod Heat Treatment Resistance Furnace. Grading of Energy Consumption
JB/T 5704-1991 Bell Type Heat Treatment Furnace. Grading of Energy Consumption

国家市场监督管理总局、中国国家标准化管理委员会

GB 37485-2019 Minimum allowable values of energy efficiency and energy efficiency gradesfor submersible mixers of wastewater
GB/T 39296-2020 Operation effect evaluation of recirculating cooling water treatment—Method of monitoring heat exchanger
GB 38449-2019 Minimum allowable values of energy efficiency and energy efficiency grade of regenerative rolling reheating furnace
GB/T 41252-2022 Evaluation method of energy efficiency on discrete manufacturing
GB 37483-2019 Minimum allowable values of energy efficiency and energy efficiency gradesfor rotary aerator in wastewater treatment

Professional Standard - Aviation

HB 5413-1988 Nitrogen for heat treatment
HB 5412-1988 Argon Gas Used in Heat Treatment
HB 5425-2012 Testing method for working zone of heat treatment furnace for aviation
HB 5425-1989 Testing Method for Work Zone of Heat Treatment Furnace of Aviation Workpiece

未注明发布机构

VDI 3459 Blatt-6 E 2022-7 Terminology of energy management and waste treatment – Thermal treatment
DIN EN ISO 2702:1994 Heat-treated steel tapping screws - Mechanical properties
SAE AMS 4085G-2024 Aluminum Alloy Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761), Solution Heat Treated and Overaged
DIN EN ISO 2702 E:2022-03 Mechanical properties of heat-treated steel self-tapping screws (draft)
SAE AMS 4134H-2024 Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat and Naturally Aged
SAE AMS 4407B-2024 Aluminum Alloy, Plate (7056-T7651), 9.1Zn - 1.6Cu - 1.9Mg, Solution Heat Treated, Stress Relieved, and Overaged

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 4751-2024 Energy efficiency evaluation method of wastewater biological treatment system

海关总署

SN/T 5535-2022 The effect evaluation for quarantine-Fumigation treatment

Professional Standard - Petrochemical Industry

SH/T 0564-1993 heat treatment oil
SH/T 0220-1992 Determination method for cooling performance of heat treatment oil

Professional Standard - Electron

SJ 2496-1984 Tapping screws of heat treated steel-Mechanical properties
SJ 2819-1987 Tapping screws of heat treated steel - Mechanical properties

Chongqing Provincial Standard of the People's Republic of China

DB50/T 12-1997 Regulations on Energy Saving Monitoring of Resistance Furnace for Heat Treatment
DB50/T 12-2008 Regulations on Energy Saving Monitoring of Resistance Furnace for Heat Treatment

Tianjin Provincial Standard of the People's Republic of China

DB12/T 051.14-2003 Energy Saving Monitoring Method for Flame Heat Treatment Furnace

Henan Provincial Standard of the People's Republic of China

DB4117/T 402-2024 Monitoring and evaluation of boiler water treatment effects in hot spot cogeneration power stations

Shanghai Provincial Standard of the People's Republic of China

DB31/ 642-2012 Energy consumption of heat treatment working procedure of metals
DB31/ 833-2014 Quota of energy consumption per unit of induction heat treatment procedure of steel and iron
DB31/T 25-1999 Economical operation and energy saving monitoring of heat - treatment electric heating equipment
DB31/T 25-2020 Energy saving monitoring and economical operation of heat-treatment electric heating equipment

未注明发布机构

DIN EN ISO 2702:1994 Heat-treated steel tapping screws - Mechanical properties
SAE AMS 4407B-2024 Aluminum Alloy, Plate (7056-T7651), 9.1Zn - 1.6Cu - 1.9Mg, Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS 4134H-2024 Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat and Naturally Aged
SAE AMS 4085G-2024 Aluminum Alloy Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761), Solution Heat Treated and Overaged
VDI 3459 Blatt-6 E 2022-7 Terminology of energy management and waste treatment – Thermal treatment
DIN EN ISO 2702 E:2022-03 Mechanical properties of heat-treated steel self-tapping screws (draft)

工业和信息化部

YB/T 4869-2020 Minimum allowable values of energy efficiency and energy efficiency grades of rolling reheating furnace

Taiwan Provincial Standard of the People's Republic of China

CNS 12670-1990 Post Weld Heaf Treatment
CNS 11279-1985 Heat-Treated Rails

Professional Standard - Aerospace

QJ 1181.1A-1995 Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Fe-ni Magnetically Soft Alloy
QJ 1181.3A-1995 Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Iron and Aluminium Magnetically Soft Alloy
QJ 1181.5A-1995 Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Corrosion-resistant Magnetically Soft Alloy
QJ 2906A-2011 Heat treatment of magnesium alloys
QJ 1181.4A-1995 Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Magnetic Temperature Compensation Alloy
QJ 1181.6A-1995 Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Constant Permeability Alloy

Professional Standard - Postal Service

YZ/T 0046-2001 Provisional regulations on working efficiency of postal center internal processing working position

Japanese Industrial Standards Committee (JISC)

JIS B 6901:1998 Heat treatment furnaces of metals -- Test methods of effective working zone and effective treating zone
JIS B 6901:1987 Test methods for effective working zone of heating equipment for metals heat treatment use
JIS B 1055:2015 Heat-treated steel tapping screws -- Mechanical properties
JIS K 2242:1997 Heat treating oils
JIS K 2242:2006 Heat treating oils
JIS K 2242:2012 Heat treating fluids

British Standards Institution (BSI)

BS 5046:1974 Method for the estimation of equivalent diameters in the heat treatment of steel
BS ISO 11814:2002 Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography
BS EN ISO 2702:2011 Heat-treated steel tapping screws. Mechanical properties
BS EN ISO 2702:2022 Fasteners. Heat treated tapping screws. Mechanical and physical properties
BS ISO 11868:2007 Heat-treated milk - Determination of lactulose content - Method using high-performance liquid chromatography
BS PD CEN/TR 17614:2021 Standard method for assessing and improving the energy efficiency of waste water treatment plants
BS EN 10325:2006 Steel - Determination of yield strength increase by the effect of heat treatment (Bake-Hardening-Index)

SCC

AWWA ACE65434 Energy Efficiency for UV Treatment Facilities
VDI 3459 BLATT 6-2024 Terminology in energy and waste management - Thermal treatment
AWWA QTC97042 Do Facility Upgrades Improve Water Quality and Treatment?
VDI 3460 BLATT 2-2014 Emissions reduction — Thermal waste treatment — Energy conversion
SPC GB 37483-2019 Minimum allowable values of energy efficiency and energy efficiency grades for rotary aerator in wastewater treatment (TEXT OF DOCUMENT IS IN CHINESE)
ASD-STAN PREN 3457:2002 Aerospace Series Titanium Alloy TI-P63 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock for Fasteners D Less Than or Equal to 25 mm
DANSK DS/ISO 11814:2003 Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography
BS EN ISO 2702:1995 Heat-treated steel tapping screws. Mechanical properties
DANSK DS/EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties
NS 1844:1973 Heat-treated steel tapping screws — Mechanical properties
VDI 3460 BLATT 2-2014 Emissions reduction — Thermal waste treatment — Energy conversion
DANSK DS/CEN/TR 17614:2021 Standard method for assessing and improving the energy efficiency of waste water treatment plants
SN-CEN/TR 17614:2021 Standard method for assessing and improving the energy efficiency of waste water treatment plants
ASD-STAN prEN 3737:1970 Titanium alloy TI-P65002 - Not heat treated — Grade 2 forging stock, for solution treated and aged forgings - a or D <or= 360 mm
ASD-STAN prEN 3465:1970 Titanium alloy TI-P63001 - Not heat treated - Grade 2 forging stock, for solution treated and aged forgings - a or D <or= 360 mm
ASD-STAN prEN 3455:1970 Titanium alloy TI-P19001 - Not heat treated - Grade 2 forging stock, for solution treated and aged forgings - a or D <or= 300 mm
DANSK DS/ISO 11868:2007 Heat-treated milk - Determination of lactulose content - Method using high-performance liquid chromatography
ASD-STAN prEN 3119:1970 Titanium alloy TI-P46001 - Not heat treated - Grade 2 forging stock, for solution treated and aged forgings - a or D <or= 360 mm
AENOR UNE-EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011)
UNE-EN ISO 2702:1995 HEAT-TREATED STEEL TAPPING SCREWS. MECHANICAL PROPERTIES. (ISO 2702:1992)
09/30208233 DC BS ISO 2702. Heat-treated steel tapping screws. Mechanical properties
NS-EN ISO 2702:2011 Heat-treated steel tapping screws — Mechanical properties (ISO 2702:2011)
NS-EN ISO 2702:1994 Heat-treated steel tapping screws — Mechanical properties (ISO 2702:1992)
NS-EN ISO 15831:2004 Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004)
ASD-STAN PREN 2669:2010 Aerospace series Heat resisting nickel base alloy Ni-P96 Melted under vacuum Not heat treated Reference heat treatment : solution treated and precipitation treated Forging stock
AWWA ACE99397 Integration of High Rate Dissolved Air Flotation Treatment Technology into Water Treatment Plant Design
AWWA MTC57561 Effective Evaluation of Membrane Process Performance against GAC and Coagulation Processes: What is Effective Pore Size Distribution?
NSF/ANSI 42-2022 Drinking Water Treatment Units - Aesthetic Effects
NSF 42-2016 Drinking Water Treatment Units - Aesthetic Effects
NSF 42-2007 Drinking Water Treatment Units - Aesthetic Effects
AWWA ACE63168 High-Rate Treatment of Spent Filter Backwash Water
NSF 42-2005 Drinking Water Treatment Units - Aesthetic Effects
NS-EN ISO 2702:2022 Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)
NSF/ANSI 42-2019 Drinking Water Treatment Units - Aesthetic Effects
NSF 42-2018 Drinking Water Treatment Units - Aesthetic Effects
NSF/ANSI 42-2023 Drinking Water Treatment Units - Aesthetic Effects
NSF 42-2017 Drinking Water Treatment Units - Aesthetic Effects
NSF/ANSI 42-2020 Drinking Water Treatment Units - Aesthetic Effects

KR-KS

KS B 4906-1986(2023) Equivalent diameter calculation method for steel heat treatment
KS M 2170-2022 Heat treating oils
KS H ISO 11868-2021 Heat-treated milk — Determination of lactulose content — Method using high-performance liquid chromatography

IT-UNI

UNI 3815-1956 Heat treatment properties of manganese. Regulation
ANCC S8.O-1973 Volume S8. heat treatment

Society of Automotive Engineers (SAE)

SAE AMS4078F-2000 Aluminum Alloy Plate (7075-T7351) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS5834-1984 WIRE, CORROSION AND HEAT RESISTANT 40Co - 20Cr - 15Ni - 7.0Mo - 0.06Be - 16Fe Solution Heat Treated, Cold Drawn, and Aged
SAE AMS5834A-2011 ALLOY WIRE, CORROSION AND HEAT RESISTANT 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Drawn, and Aged
SAE AMS4240F-1994 CASTINGS, SAND 10Mg Solution Heat Treated & Naturally Aged
SAE AMS4303B-2012 Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Aged
SAE AMS4303-1994 ALUMINUM ALLOY PLATE 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Aged
SAE J413B-1978 MECHANICAL PROPERTIES OF HEAT TREATED WROUGHT STEELS
SAE AMS4934H-2019 Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged
SAE AMS4904-2003 Titanium Alloy Sheet, Strip, and Plate 6Al 4V Solution Heat Treated and Aged
SAE AMS4990-2003 Titanium Alloy Sheet, Strip, and Plate 6Al 6V 2Sn Solution Heat Treated and Aged
SAE AMS4411-2013 Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4050H-2011 Aluminum Alloy, Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4250A-2012 Aluminum Alloy, Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4411A-2019 Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4401A-2017 Aluminum Alloy Plate (7140-T7451) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4306A-2000 Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151) Solution Heat Treated, Stress Relieved, and Aged
SAE AMS4306B-2012 Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151) Solution Heat Treated, Stress Relieved, and Aged
SAE J413-2002 Mechanical Properties of Heat Treated Wrought Steels
SAE AMS4407-2012 Aluminum Alloy, Plate (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4410-2013 Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4211B-2012 Aluminum Alloy, Plate 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4410A-2019 Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
SAE AMS4401B-2022 Aluminum Alloy, Plate (7140-T7451) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4361A-2020 Aluminum Alloy, Plate (7065-T7451) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4432-2019 Aluminum Alloy, Plate (7160-T7451) 7.0Zn – 2.2Cu – 1.5Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4470B-2018 Aluminum Alloy, Plate (7085-T7451) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4107H-2023 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged
SAE AMS5845A-1979 ALLOY BARS, HIGH STRENGTH, CORROSION RESISTANT 20Cr - 35Ni - 35Co - 10Mo Solution Heat Treated, Cold Drawn, and Aged
SAE AMS4365A-2022 Aluminum Alloy, Plate 7.9Zn - 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4354A-2022 Aluminum Alloy, Plate, 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4107F-2012 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged
SAE AMS4206-1999 Aluminum Alloy, Plate (7055-T7751) 8.0Zn 2.3Cu 2.0Mg 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4448-2020 Aluminum Alloy, Plate (7160-T7351) 7.0Zn - 2.2Cu - 1.5Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4408-2017 Aluminum Alloy, Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4351A-2020 Aluminum Alloy, Plate (7065-T7651) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4364A-2021 Aluminum Alloy, Plate, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4329A-2011 Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4252B-2012 Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T7751) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4157B-1988 ALUMINUM ALLOY EXTRUSIONS 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4437D-1994 Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged
SAE AMS2759/3-2011 Heat Treatment, Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
SAE AMS4157D-2017 Aluminum Alloy Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS2759/3A-1993 Heat Treatment, Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
SAE AMS4437E-2008 Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged
SAE AMS6543B-1995 STEEL BARS AND FORGINGS, MARAGING 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum Melted, Solution Heat Treated
SAE AMS6518A-1992 STEEL SHEET, STRIP, AND PLATE, MARAGING 19Ni - 3.0Mo - 1.4Ti - 0.10Al Double Vacuum Melted, Solution Heat Treated
SAE AMS4120P-2001 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351)
SAE AMS4120R-2010 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351)
SAE AMS4450-2019 Aluminum Alloy, Extruded Profiles (2043-T85) 2.8Cu - 1.65Li - 0.35Mg - 0.1Zr Solution Heat Treated, Stress Relieved by Stretching, and Aged
SAE AMS2759/3E-2014 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel parts
SAE AMS4240F-1989 (Noncurrent)Castings, Sand 10Mg Solution Heat Treated and Naturally Aged R(1994)
SAE AMS4050D-1991 ALUMINUM ALLOY PLATE 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451, formerly -T73651) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4085B-1995 Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
SAE AMS4085G-2024 Aluminum Alloy Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761), Solution Heat Treated and Overaged
SAE AMS4085E-2018 Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
SAE AMS4251-1989 Aluminum Alloy, Sheet, 2.7Cu 2.2Li 0.12Zr, Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
SAE AMS4272A-2021 Aluminum Alloy, Alclad Sheet and Plate (Alclad 2029-T8) 3.6Cu - 0.30Mn - 0.95Mg - 0.40Ag - 0.12Zr Solution Heat Treated, Cold Worked and Aged
SAE AMS4329A-2006 Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged UNS A97085
SAE AMS4904E-2023 Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated and Aged
SAE AMS4214J-2013 Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged
SAE AMS4223C-1996 Aluminum Alloy, Castings 4.5Cu 0.70Ag 0.30Mn 0.25Mg 0.25Ti, Solution Heat Treated and Naturally Aged
SAE AMS4347B-2001 Aluminum Alloy Sheet, 1.0Mg 0.8Si 0.8Cu 0.50Mn (6013-t4) Solution Heat Treated and Naturally Aged
SAE AMS5739-1968 STEEL BARS, FORGINGS, AND RINGS, CORROSION AND MODERATE HEAT RESISTANT 14.5Cr - 6.5Ni - 0.72Ti Solution Treated and Maraged (180,000 psi)
SAE AMS6930G-2022 Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V, Solution Heat Treated and Aged
SAE AMS6521A-1991 STEEL SHEET, STRIP, AND PLATE, MARAGING 18.5Ni - 9.0Co - 4.9Mo - 0.6 5Ti - 0.10Al Consumable Electrode Melted, Solution Heat Treated
SAE AMS6520B-1994 STEEL SHEET, STRIP, AND PLATE, MARAGING 250 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable-Electrode Melted, Solution Heat Treated
SAE AMS5339B-1982 STEEL CASTINGS, INVESTMENT, MARAGING 17Ni - 10Co - 4.6Mo - 0.3Ti - 0.06Al Homogenized, Overaged, and Solution Heat Treated
SAE AMS5740-1968 STEEL BARS, FORGINGS, AND RINGS, CORROSION AND MODERATE HEAT RESISTANT 14.5Cr - 6.5Ni - 0.72Ti Solution Treated and Maraged (155,000 psi)
SAE AMS5875A-2011 ALLOY STRIP, CORROSION AND HEAT RESISTANT 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Rolled, and Aged
SAE AMS4146C-1984 ALUMINUM ALLOY FORGINGS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated and Naturally Aged
SAE AMS6935D-2024 Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 6.0V - 2.0Sn, Solution Heat Treated and Aged
SAE AMS4236A-2000 Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4242B-2012 Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged
SAE AMS4216B-2013 Aluminum Alloy, Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged
SAE AMS4166F-2008 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged
SAE AMS4216C-2020 Aluminum Alloy, Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged
SAE AMS6926D-2022 Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged
SAE AMS4990D-2019 Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated and Aged
SAE AMS5834B-2000 Cobalt Alloy, Corrosion and Heat Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Drawn, and Aged
SAE AMS5875B-2000 Cobalt Alloy, Corrosion and Heat Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Rolled, and Aged
SAE AMS4347E-2020 Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged
SAE AMS4166C-1985 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged
SAE AMS4965N-2022 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged
SAE AMS4280H-2006 Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged
SAE AMS4243C-2020 Aluminum Alloy, Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged
SAE AMS4280J-2014 Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged
SAE AMS4161G-2010 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4223D-2012 Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4473B-2022 Aluminum Alloy Plate (2624-T39) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Naturally Aged
SAE AMS4237A-2000 Aluminum Alloy Castings, Sand 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0-T71) Solution Heat Treated and Naturally Aged
SAE AMS6544B-1995 PLATE, MARAGING STEEL 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum Melted, Solution Heat Treated
SAE AMS4223B-1995 ALUMINUM ALLOY CASTINGS 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4161E-2011 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4299B-2023 Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4161D-1984 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4161J-2020 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4243B-2014 Aluminum Alloy, Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged
SAE AMS4347D-2014 Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged (UNS A96013)
SAE AMS4934J-2024 Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 4V, Solution Heat Treated and Aged
SAE AMS7479A-1958 BOLTS AND SCREWS, STEEL, CORROSION AND HEAT RESISTANT Heat Treated - Roll Threaded 1650 F Heat Treatment
SAE AMS6906B-2015 Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and Aged
SAE AMS7478C-1960 BOLTS AND SCREWS, STEEL, CORROSION AND HEAT RESISTANT Heat Treated - Roll Threaded 1800 F Heat Treatment

SAE - SAE International

SAE AMS5834B-1993 Cobalt Alloy@ Corrosion and Heat Resistant@ Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated@ Cold Drawn@ and Aged (UNS R30003)
SAE AMS4303-1990 Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated@ Cold Worked@ and Aged
SAE AMS4240G-2005 Castings@ Sand 10Mg Solution Heat Treated and Naturally Aged
SAE AMS4303C-2017 Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated@ Cold Worked@ and Aged
SAE J413-1932 Mechanical Properties of Heat Treated Wrought Steels
SAE J413-1990 Mechanical Properties of Heat Treated Wrought Steels (June 1990)
SAE AMS4904C-2015 Titanium Alloy Sheet@ Strip@ and Plate 6Al - 4V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4904D-2018 Titanium Alloy Sheet@ Strip@ and Plate 6Al - 4V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4934-1975 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 6Al - 4V Solution Heat Treated and Aged
SAE AMS4934A-1977 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 6Al - 4V Solution Heat Treated and Aged
SAE AMS4983-1984 Titanium Alloy Forgings 10V - 2.0Fe - 3.0Al Solution Heat Treated and Aged
SAE AMS5845E-1996 Alloy@ Corrosion Resistant@ Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated@ Work Strengthened@ and Aged (UNS R30035)
SAE AMS2759/3C-2000 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
SAE AMS2759/3F-2015 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
SAE AMS5845F-2002 Alloy@ Corrosion-Resistant@ Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated@ Work Strengthened@ and Aged (UNS R30035)
SAE AMS2759/3B-1996 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
SAE AMS5845K-2019 Alloy@ Corrosion-Resistant@ Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated@ Work Strengthened@ and Aged (UNS R30035)
SAE AMS2759/3A-1996 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
SAE AMS4437D-1990 Magnesium Alloy Castings@ Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged
SAE AMS4159C-1998 Aluminum Alloy@ Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T76511) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97049)
SAE AMS4107E-1999 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged (UNS A97050)
SAE AMS4240E-1982 Aluminum Alloy Castings@ Sand 10Mg (520.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4340B-1986 ALUMINUM ALLOY@ EXTRUSIONS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97050)
SAE AMS4166D-1991 Extrusions@ Aluminum Alloy 5.6Zn - 2.5mg - 1.6Cu - 0.23Cr (7075- T73) Solution Heat Treated and Overaged
SAE AMS4107G-2018 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged (UNS A97050)
SAE AMS4229-1969 ALUMINUM ALLOY CASTINGS@ HIGH STRENGTH 4.5Cu - 0.70Ag Solution Heat Treated and Overaged
SAE AMS4120S-2018 Aluminum Alloy@ Rolled or Cold Finished Bars@ Rods@ and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated@ Cold Worked@ and Naturally Aged (T351) (UNS A92024)
SAE AMS4120P-1995 Aluminum Alloy@ Rolled or Cold Finished Bars@ Rods@ and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated@ Cold Worked@ and Naturally Aged (T351) (UNS A92024)
SAE AMS4216-1989 Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged
SAE AMS4120M-1990 ALUMINUM ALLOY BARS@ RODS@ AND WIRE@ ROLLED OR COLD FINISHED 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated@ Cold Worked@ and Naturally Aged (T351) (UNS A92024)
SAE AMS4120N-1994 ALUMINUM ALLOY@ ROLLED OR COLD FINISHED BARS@ RODS@ AND WIRE 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated@ Cold Worked@ and Naturally Aged (T351) (UNS A92024)
SAE AMS4120L-1989 ALUMINUM ALLOY BARS@ RODS@ AND WIRE@ ROLLED OR COLD FINISHED 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated@ Cold Worked@ and Naturally Aged (T351) (UNS A92024)
SAE AMS5875B-1993 Cobalt Alloy@ Corrosion and Heat Resistant@ Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated@ Cold Rolled@ and Aged (UNS R30003)
SAE AMS4120K-1988 ALUMINUM ALLOY BARS@ RODS@ AND WIRE@ ROLLED OR COLD FINISHED 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated@ Cold Worked@ and Naturally Aged (T351) (UNS A92024)
SAE AMS5875D-2018 Cobalt Alloy@ Corrosion and Heat-Resistant@ Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated@ Cold Rolled@ and Aged Vacuum Induction Plus Vacuum Consumable Electrode Melted (UNS R30003)
SAE AMS4085F-2019 Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged (UNS A97475)
SAE AMS4243-1988 ALUMINUM ALLOY SHEET@ ALCLAD 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged
SAE AMS4107D-1992 Aluminum Alloy Die Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74) Solution Heat Treated and Overaged
SAE AMS4342A-1986 ALUMINUM ALLOY@ EXTRUSIONS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) (Formerly - t736511) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97050)
SAE AMS4347A-1992 Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged
SAE AMS4214E-1978 ALUMINUM ALLOY CASTINGS@ SAND 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged (UNS A03550)
SAE AMS6930-2004 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400)
SAE AMS4330-2001 Aluminum Alloy@ Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.25Mg Solution Heat Treated@ Stretched@ and Artificially Aged
SAE AMS4108C-1987 Aluminum Alloy Hand Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) (formerly -T73652) Solution Heat Treated@ Compression Stress-Relieved@ and Overaged (UNS A97050)
SAE AMS2821-2017 Salts@ Heat-Treating (For Metals)
SAE AMS4214K-2019 Castings@ Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged (UNS A03550)
SAE AMS4223-1974 ALUMINUM ALLOY CASTINGS 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4280G-1990 Aluminum Alloy Castings@ Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0 -T71) Solution Heat Treated and Overaged
SAE AMS6930F-2018 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400)
SAE AMS-H-6088-1997 Heat Treatment of Aluminum Alloys
SAE AMS-H-6088C-2000 Heat Treatment of Aluminum Alloys
SAE AMS4347-1987 ALUMINUM ALLOY SHEET 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T4) Solution Heat Treated and Naturally Aged (UNS A96013)
SAE AMS4237-1980 ALUMINUM ALLOY CASTINGS@ SAND 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0 -T4) Solution Heat Treated and Naturally Aged
SAE AMS6930A-2006 Titanium Alloy Bars@ Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400)

Korean Agency for Technology and Standards (KATS)

KS B 4003-1990(2020) Test methods for Effective Working Zone of Heating Equipment for meta1s Heat Treatment Use
KS B 4003-2020 Test methods for Effective Working Zone of Heating Equipment for metals Heat Treatment Use
KS M 2172-2021 Testing method for cooling ability of heat treating oils
KS M 2170-1985 Heat treating oils
KS M 2170-2019 Heat treating oils
KS M 2172-2011(2016) Testing method for cooling ability of heat treating oils
KS H ISO 11868:2006 Heat-treated milk－Determination of lactulose content－Method using high-performance liquid chromatography
KS H ISO 11868-2006(2016) Heat-treated milk－Determination of lactulose content－Method using high-performance liquid chromatography
KS H ISO 11868:2021 Heat-treated milk — Determination of lactulose content — Method using high-performance liquid chromatography
KS R 9110-2002 Head hardened rails
KS M 2170-2007 Heat treating oils

German Institute for Standardization

DIN 50190-3:1979 Hardness depth of heat-treated parts; determination of the effective depth of hardening after nitriding
DIN 17023:2000 Heat treatment of ferrous metals - (WBA) Forms - Heat-treatment order
DIN EN ISO 2702:2023-03 Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022); German version EN ISO 2702:2022
DIN 17022-3:1989 Heat treatment of ferrous materials; heat treatment methods; case hardening
DIN 17023:2000-03 Heat treatment of ferrous metals - (WBA) Forms - Heat-treatment order
DIN EN 10325:2006 Steel - Determination of yield strength increase by the effect of heat treatment (Bake-Hardening-Index); English version of DIN EN 10325:2006-10
DIN 6773:2001 Heat treatment of ferrous metals - Heat treated parts, presentation and indications on drawings
DIN 17022-3:1989-04 Heat treatment of ferrous materials; heat treatment methods; case hardening
DIN EN ISO 2702:2023 Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE AN-04-5-1-2004 Energy-Saving Opportunities in Residential Air-Handler Efficiency

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 3455-1988 Titanium Alloy TI-P11 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock De Less Than or Equal to 300 mm
PREN 3465-1988 Titanium Alloy TI-P68 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock De Less Than or Equal to 360 mm
PREN 3313-1988 Titanium Alloy TI-P63 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock De Less Than or Equal to360 mm
PREN 3321-1988 Aerospace Series Titanium Alloy TI-P67 Not Heat Treated Reference Heat Treatment : Solution Treated and Aged Grade 1 Forging Stock De Less Than or Equal to 360 mm (Issue P 1)
PREN 2669-2010 Aerospace series Heat resisting nickel base alloy Ni-P96 Melted under vacuum Not heat treated Reference heat treatment : solution treated and precipitation treated Forging stock (Edition P2)
PREN 2669-1988 Aerospace Series Heat Resisting Nickel Base Alloy Ni-P96 Melted Under Vacuum Not Heat Treated Reference Heat Treatment: Solution Treated and Precipitation Treated Forging Stock (Issue P 1)
PREN 3457-2002 Aerospace Series Titanium Alloy TI-P63 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock for Fasteners D Less Than or Equal to 25 mm (Issue P 2)

GSO

GSO ISO 2702:2015 Heat-treated steel tapping screws -- Mechanical properties
GSO ISO 11814:2014 Dried milk -- Assessment of heat treatment intensity -- Method using high-performance liquid chromatography
OS GSO ISO 11814:2014 Dried milk -- Assessment of heat treatment intensity -- Method using high-performance liquid chromatography
BH GSO ISO 2702:2017 Heat-treated steel tapping screws -- Mechanical properties
OS GSO ISO 2702:2015 Heat-treated steel tapping screws -- Mechanical properties
GSO ISO 11868:2010 Heat-treated milk- Determination of lactulose content- method using high-performance liquid chromatography
OS GSO ISO 11868:2010 Heat-treated milk- Determination of lactulose content- method using high-performance liquid chromatography

International Organization for Standardization (ISO)

ISO 11814:2002 Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography
ISO 11814:2002|IDF 162:2002 Evaluation of heat treatment degree of milk powder by high performance liquid chromatography
ISO 2702:1974 Heat-treated steel tapping screws — Mechanical properties
ISO 2702:1992 Heat-treated steel tapping screws; mechanical properties
ISO 11814:2002 | IDF 162:2002 Dried milk — Assessment of heat treatment intensity — Method using high-performance liquid chromatography
ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties
ISO 11868:2007 | IDF 147:2007 Heat-treated milk — Determination of lactulose content — Method using high-performance liquid chromatography
ISO 2702:2022 Fasteners — Heat treated tapping screws — Mechanical and physical properties
ISO 11868:2007 Heat-treated milk - Determination of lactulose content - Method using high-performance liquid chromatography
ISO 11868:2007|IDF 147:2007 Determination of lactulose content in heat-treated milk by high performance liquid chromatography
ISO 9866-1:1991 Textiles; effect of dry heat on fabrics under low pressure; part 1: procedure for dry-heat treatment of fabrics
ISO 16075-5:2021 Guidelines for treated wastewater use for irrigation projects - Part 5: Treated wastewater disinfection and equivalent treatments

(U.S.) Ford Automotive Standards

FORD M4B23-A-1988 HEAT TREAT SALT, NITRATE (LOW TEMPERATURE)
FORD BHX-1977 HEAT TREAT FURNACES
FORD FLTM AB 107-01-2013 MECHANICAL PROPERTIES MEASUREMENT AFTER THERMAL PROCESSING OF ALUMINUM ALLOY SHEET

RO-ASRO

STAS 11780-1980 Heat treatment equipment INDUCTION HEAT TREATMENT EQUIPMENTS
STAS 12195-1984 Oil for heat treatments OIL TT 22
STAS 3500-1985 THERMAL TREATMENT PLANTS Classification

Danish Standards Foundation

DS/EN ISO 2702:1994 Heat-treated steel tapping screws - Mechanical properties
DS/EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties
DS/CEN/TR 17614:2021 Standard method for assessing and improving the energy efficiency of waste water treatment plants
DS/ISO 11814:2003 Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography
DS/ISO 11868:2007 Heat-treated milk - Determination of lactulose content - Method using high-performance liquid chromatography

RU-GOST R

GOST ISO 2702-2015 Heat-treated steel tapping screws. Mechanical properties
GOST ISO 9866-1-2013 Textiles. Effect of dry heat under low pressure. Part 1. Procedure for dry-heat treatment
GOST R ISO 2702-1993 Heat-treated steel tapping screws. General specifications
GOST R ISO 2702-2009 Heat-treated steel tapping screws. Mechanical properties
GOST 33868-2016 Energy efficiency. Water heaters and hot water storage tanks. Indicators of energy efficiency and determination methods
GOST 27864-1988 Electric furnaces for heat treatment of glass containers. Specific energy consumtion

Standard Association of Australia （SAA）

AS/NZS 4412:1996 Heat-treated steel tapping screws - Mechanical properties
AS/NZS 4412:2015 Mechanical properties of heat-treated steel self-tapping screws

NO-SN

NS 1844-1973 Heat-treated steel tapping screws - Mechanical properties

American National Standards Institute （ANSI)

ANSI/ASTM D4064:2001 Practice for Preservative Treatment of Utility Poles by the Thermal Process
ANSI/NSF 60(i55)-2012 Drinking Water Treatment Chemicals - Health Effects
ANSI/NSF 60(i58)-2012 Drinking water treatment chemicals - Health effects
ANSI/NSF 53(i86)-2012 Drinking water treament units - Health effects
ANSI/NSF 53(i83)-2012 Drinking water treatment units - Health effects
ANSI/NSF 53(i90r2)-2013 Drinking Water Treatment Units - Health Effects
ANSI/NSF 42(i74)-2013 Drinking Water Treatment Units - Aesthetic Effects
ANSI/NSF 53(i91)-2013 Drinking Water Treatment Units - Health Effects
ANSI/NSF 42(i71)-2012 Drinking Water Treatment Units - Aesthetic Effects
ANSI/NSF 53(i93r1)-2013 Drinking Water Treatment Units - Health Effects
ANSI/NSF 53(i62)-2007 Drinking Water Treatment Units - Health Effects
ANSI/NSF 53(i88)-2012 Drinking water treatment units- health effects
ANSI/NSF 42(i68)-2011 Drinking Water Treatment Units - Aesthetic effects
ANSI/NSF 42(i76)-2012 Drinking water treatment units- aesthetic effects
ANSI/NSF 53(i26)-2000 Drinking Water Treatment Units - Health Effects
ANSI/NSF 53(i89)-2012 Drinking water treatment units - Health effects
ANSI/NSF 42(i69)-2011 Drinking Water Treatment Units - Aesthetic Effects

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1923.1-2021 Computation of Energy Efficiency Upper Bound for Apparatus Processing Communication Signal Waveforms

Association Francaise de Normalisation

NF E25-650-1:1994 Heat-treated steel tapping screws. Mechanical properties.
NF E25-650-1*NF EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties
NF ISO 11868:2008 Heat-treated milk - Determination of lactulose content - High-performance liquid chromatography method
NF P50-301:1988 Solar energy. Solar hot water tanks. Measurement of thermal performances.
NF V04-356*NF ISO 11868:2008 Heat-treated milk - Determination of lactulose content - Method using high-performance liquid chromatography.
NF ISO 6735:1986 Dry milk - Heat treatment class assessment - Heat treatment index reference method
NF A03-680*NF EN 10325:2006 Steel - Determination of yield strength increase by the effect of heat treatment (Bake-Hardening-Index)

CU-NC

NC 04-80-1987 Materials Testing. Thermal Treatment in Steels Submitted to Abrasive Wear in Soils. Work Rate Specifications

YU-JUS

JUS C.A2.055-1995 Heat treatment of ferrous metals - Forms which use as order for heat-treatment
JUS C.A0.010-1982 Heat treatment of metal. Type of heat treatment Terms and definitions

American Society for Testing and Materials (ASTM)

ASTM E2963-16 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
ASTM E2963-15 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
ASTM D5664-01 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
ASTM D5664-17 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

European Committee for Standardization (CEN)

EN ISO 2702:2022 Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)
EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011)
PD CEN/TR 17614:2021 Standard method for assessing and improving the energy efficiency of waste water treatment plants
CEN/TR 17614:2021 Standard method for assessing and improving the energy efficiency of waste water treatment plants
EN ISO 2702:1994 Heat-Treated Steel Tapping Screws - Mechanical Properties (ISO 2702 : 1992)
EN 10325:2006 Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index]
EN 927-2:2022 Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)
EN 13300:2022 Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)

International Dairy Federation (IDF)

IDF 162-2002 Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography
IDF 147-2007 Heat-treated milk -- Determination of lactulose content -- Method using high-performance liquid chromatography

HU-MSZT

MSZ 09 80 007-1971 heat treated silver
MSZ 2105/8-1983 Textile material color processing and wet treatment. Boiling water treatment effect testing
MSZ 2105/2-1983 Textile material color processing and wet treatment. Seawater treatment effect testing

International Electrotechnical Commission (IEC)

IEC 27/874/CD:2012 Energy efficiency in electroheating installations

GM North America

GM GMN7486-2003 Low Carbon, Boron Treated, Induction Heat Treatable Steel

CZ-CSN

CSN 36 1106-1986 Electrically heated furnaces and salt baths for heating and heat treatment of metals. Energy consumption rates
CSN 65 4110-1981 Salt for heat treatment

GM Europe

GME QS 152800-1989 Vergtungsstahl Heat Treatable Steel

Lithuanian Standards Office

LST EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011)

Association of German Mechanical Engineers

VDI 3460 Blatt 2-2007 Emission control - Energy conversion in thermal solid waste treatment

Military Standards (MIL-STD)

DOD A-A-54371-1991 HEATER, HEAT TREATMENT PAD
DOD A-A-54093-1990 HEATER, HEAT TREATMENT PAD

AENOR

UNE-EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011)

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 2669-2010 Aerospace series Heat resisting nickel base alloy Ni-P96 Melted under vacuum Not heat treated Reference heat treatment : solution treated and precipitation treated Forging stock Edition P2

European Association of Aerospace Industries

AECMA PREN 3457-2002 Aerospace Series Titanium Alloy TI-P63 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock for Fasteners D Less Than or Equal to 25 mm Issue P 2 [Refer To: ASD-STAN PREN 3813]