fiberglass bending fatigue

fiberglass bending fatigue, Total:185 items.

The international standard classification for "fiberglass bending fatigue" includes: Materials for aerospace construction , Testing of metals , Textile glass materials , Reinforced plastics , Mechanical testing of metals , Gears , Advanced ceramics , Mechanical testing .

The Chinese standard classification for "fiberglass bending fatigue" includes: Composite materials and solid fuels , Metal processing property test method , Aerospace hydraulic elements and accessories , Glass fibre , Fibre reinforced composites , Metal mechanical property test method , Gear and gear drive , Ceramic and glass in general , Metal material testing machine , Bridge, culvert and tunnel components .

Professional Standard - Aviation

HB 5152-1996 Method of Rotating Bending Fatigue Test for Metal at Room Temperature
HB 5153-1996 Method of Rotating Bending Fatigue Test for Metal at High Temperature
HB 5152-1980 Test method for rotational bending fatigue of metals at room temperature
HB 5365-1986 Tensile fatigue test method for aviation plexiglass
HB 5153-1980 High temperature rotating bending fatigue test method for metals
HB 6442-1990 Fatigue bending test of aircraft hydraulic pipe and connection pieces
HB 7624-1998 Test Method for Bending Fatigue of Carbon Fibre Composite Laminated Wood
HB/Z 89.3-1985 Calculation of Bending Fatigue Strength of Aviation Bevel Gear Tooth

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33837-2017 Coated glass fiber products -- Determination of the tension-tension fatigue properties

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7733-1987 Matals-rotating bar bending corrosion fatigue testing
GB/T 43296-2023 Test method for bending fatigue of fine ceramics at room temperature
GB/T 4337-2015 Metallic materials―Fatigue testing―Rotating bar bending method
GB/T 43354-2023 Methods for plane bending fatigue of copper alloy elastic strip
GB/T 4337-1984 Metals--Rotating bar bending fatigue testing
GB/T 13096.2-1991 Test method for flexural properties of pultruded glass fiber reinforced plastic rods
GB/T 14208-1993 Textile glass－Rovings－Determination of flexural strength of rod composites
GB/T 4337-2008 Metallic materials - Fatigue testing - Rotating bar bending method
GB/T 2107-1980 Metal material--Twisting fatigue test
GB/T 1449-1983 Test method for flexural properties of glass fiber-reinforced plastics
GB/T 12347-2008 Steel wire ropes - Bending fatigue testing
GB/T 14230-1993 of test method for bending load capacity of gears
GB/T 12347-1996 Steel wire rope-Bending fatigue testing

Professional Standard - Building Materials

JC/T 349-1983 Fiberglass reinforced plastics. Test method of tension fatigue resistance
JC/T 778-2010 Test method for flexural creep of glass fibre reinforced plastics sheet and sandwich construction with honeycomb core

工业和信息化部/国家能源局

JB/T 13554-2018 Internal combustion engine bending fatigue test methods for crankshaft

Taiwan Provincial Standard of the People's Republic of China

CNS 7376-1997 Method of plane bending fatigue testing of metal plates
CNS 14315-1999 Methods of test for bending fatigue of fine ceramics at room temperature
CNS 8527-1982 Method of Test for Flexural Fatigue of Rigid Plastics by Plane Bending
CNS 10017-1983 Method of Test for Bending Fatigue of Vulcanized Rubber
CNS 7375-1997 Method of rotating bending fatigue testing of metals

Professional Standard - Machinery

JB/T 7716-1995 Four-point bending fatigue test method for welded joints
JB/T 9374-2015 Pure bending fatigue testing machines.Technical specification
JB/T 6543-1993 Plane bending fatigue characteristic of hard plastic sheet - Test method
JB/T 9374-1999 Specifications for rotary bending fatigue testing machines

Professional Standard - Railway

TB/T 1354-1979 Rail bending fatigue test method
TB/T 2485-1994 Test Method for Bending Fatigue of High Manganese Steel Frog
TB/T 2326-1992 Testing Method for Bending Fatigue of Simply Supported Beam of Prestressed Concrete

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 35465.5-2020 Test method for fatigue properties of polymer matrix composite materials—Part 5:Flexural fatigue
GB/T 14230-2021 Test method of tooth bending strength for gear load capacity

National Metrological Technical Specifications of the People's Republic of China

JJF(石化)025-2019 Calibration Specification for Wheels Bending Fatigue Testing Machine
JJF 1315.2-2011 Program of Pattern Evaluation for Fatigue Testing Machines—Part 2:Rotating Pure Bending Fatigue Testing Machines
JJF(石化) 025-2019 Calibration Specification for Wheels Bending Fatigue Testing Machine

Professional Standard - Automobile

QC/T 637-2000 Test method for endurance bending strength of automotive engines crank shaft

Professional Standard - Ferrous Metallurgy

YB/T 4288-2012 Steel Wire Ropes for Elevators-Bending Fatigue Testing

未注明发布机构

DIN 50113 E:2018-06 Testing of metals; Rotating bar bending fatigue test
ASTM RR-D20-2003 2022 D7774-Test Method for Flexural Fatigue Properties of Plastics
DIN 50142 E:2019-01 Testing of metallic materials; Flat bending fatigue test
DIN 50142:1941 Testing of metallic materials; Flat bending fatigue test
DIN 50113:1952 Testing of metals; Rotating bar bending fatigue test

National Metrological Verification Regulations of the People's Republic of China

JJG 652-1990 Verification Regulation of Rotating Pure Bending Fatigue Testing Machines
JJG 652-2012 Rotating Pure Bending Fatigue Testing Machines

Military Standard of the People's Republic of China-General Armament Department

GJB 84-1986 High-strength fiberglass cloth (S fiberglass cloth)
GJB 2033-1994 Tensile fatigue test method for aviation plexiglass
GJB 83-1986 High-strength glass fiber yarn (S glass fiber yarn)

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS 3518-2:1962 Methods of fatigue testing - Rotating bending fatigue tests
BS ISO 1143:2021 Metallic materials. Rotating bar bending fatigue testing
BS ISO 22407:2021 Metallic materials. Fatigue testing. Axial plane bending method
BS ISO 1143:2010 Metallic materials. Rotating bar bending fatigue testing
BS ISO 11485-3:2014 Glass in building. Curved glass. Requirements for curved tempered and curved laminated safety glass
18/30366891 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
20/30404146 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing

GM North America

GMP.PUR.018-1995 Polyurethane RRIM - 20% Glass Fiber, 700 MPa Flexural Modulus Revision A
GM GMP.PBTP+PETP.002-2001 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 6150 MPa Flexural Modulus
GM GMP.PBTP+PETP.003-1998 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 9600 MPa Flexural Modulus Replaced by GMP.PBT+PET.003

BE-NBN

NBN S 22-005-1988 Textile glass - Continuous filament yarns and staple fibre yarns - Determination of twist
NBN 927-1971 Glass fiber reinforced plastic. Determination of bending characteristics (three-failure method)

AENOR

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.

American National Standards Institute （ANSI)

ANSI/ASTM D5365:2012 Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

Japanese Industrial Standards Committee (JISC)

JIS K 7082:1993 Testing method for complete reversed plane bending fatigue of carbon fibre reinforced plastics
JIS K 7055:1995 Testing method for flexural properties of glass fiber reinforced plastics
JIS Z 2275:1978 Method of plane bending fatigue testing of metal plates
JIS Z 2274:1978 Method of rotating bending fatigue testing of metals
JIS K 7119:1972 Testing method of flexural fatigue of rigid plastics by plane bending
JIS Z 2286:2003 Method for high temperature rotating bending fatigue testing of metallic materials
JIS R 1658:2003 Testing methods for bending fatigue of fine ceramics at elevated temperatures
JIS R 1621:2008 Testing method for bending fatigue of fine ceramics at room temperature
JIS R 1658:2008 Testing method for bending fatigue of fine ceramics at elevated temperature
JIS R 1621:1995 Testing methods for bending fatigue of fine ceramics at room temperature

IPC - Association Connecting Electronics Industries

IPC TM-650 2.4.2.1D-1991 Flexural Fatigue and Ductility@ Foil
IPC TM-650 2.4.33C-1991 Flexural Fatigue and Ductility@ Flat Cable
IPC TM-650 2.4.3.1C-1991 Flexural Fatigue and Ductility@ Flexible Printed Wiring
IPC TM-650 2.4.3.2C-1991 Flexural Fatigue and Ductility@ Flexible Metal-Clad Dielectrics

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

Korean Agency for Technology and Standards (KATS)

KS M 3382-2004 Testing methods for flexural properties of glass fiber reinforced plastics
KS M 3036-2016 Testing method of flexural fatigue of rigid plastics by plane bending
KS L ISO 4604:2013 Textile glass-Woven fabrics-Determination of conventional flexural stiffness-Fixed-angle flexometer
KS L ISO 4604:2008 Textile glass-Woven fabrics-Determination of conventional flexural stiffness-Fixed-angle flexometer method
KS M 3036-2021 Testing method of flexural fatigue of rigid plastics by plane bending
KS B ISO 1143-2003(2018) Rotating bar bending fatigue test for metallic materials
KS B ISO 1143:2003 Metals－Rotating bar bending fatigue testing
KS M 3036-2016(2021) Testing method of flexural fatigue of rigid plastics by plane bending
KS F 2378-2013(2019) Standard test method for flexural beam fatigue of asphalt mixtures
KS M 3036-2011 Testing method of flexural fatigue of rigid plastics by plane bending
KS F 2378-2019 Standard test method for flexural beam fatigue of asphalt mixtures

SCC

DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DIN 50113 E:2018 Draft Document - Testing of metals - Rotating bar bending fatigue test
09/30096507 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
DIN 50142 E:2019 Draft Document - Testing of metallic materials - Flat bending fatigue test

Association Francaise de Normalisation

NF T51-120-4:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 4 : essai en flexion quatre points sur éprouvettes non encastrées.
NF A03-402:1983 Iron and steel. Fatigue test by rotary flexion.
NF B30-101:1967 Glass. Bend test of a dual-glass test specimen.
NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF P38-504:1984 GLASS FIBRE REINFROCED CORRUGATED OR RIBBED POLYESTER SHEETS. STATIC DEFLECTION TESTS UNDER DISTRIBUTED LOAD.
NF L17-703*NF EN 2746:1998 Aerospace series. Glass fibre reinforced plastics. Flexural test. Three point bend method.

Society of Automotive Engineers (SAE)

SAE J1619-1997 Single Tooth Gear Bending Fatigue Test
SAE AIR1418B-2020 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418-2011 FLEXURE FATIGUE STRENGTH OF TUBE FITTING JOINTS
SAE AIR1418A-2013 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418A-1996 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418A-1980 Flexure Fatigue Strength of Tube Fitting Joints R(2001)
SAE ARP1258B-2013 Qualification of Hydraulic Tube Joints to Specified Flexure Fatigue Requirements
SAE ARP1258A-2011 QUALIFICATION OF HYDRAULIC TUBE JOINTS TO SPECIFIED FLEXURE FATIGUE REQUIREMENTS
SAE ARP1258-1973 QUALIFICATION OF HYDRAULIC TUBE JOINTS TO SPECIFIED FLEXURE FATIGUE REQUIREMENTS

KR-KS

KS L ISO 4604-2013(2023) Textile glass-Woven fabrics-Determination of conventional flexural stiffness-Fixed-angle flexometer
KS B ISO 1143-2003(2023) Rotating bar bending fatigue test for metallic materials

BELST

STB 1758-2007 Tribo-fatigue. Method of combined tests of the toothed gearing materials to contact and bending fatigue

SAE - SAE International

SAE J1619-2017 Single Tooth Gear Bending Fatigue Test
SAE J388-1998 Dynamic Flex Fatigue Test for Slab Polyurethane Foam
SAE J388-1969 Dynamic Flex Fatigue Test for Slab Polyurethane Foam

German Institute for Standardization

DIN 53398:1975 Testing of textile glass reinforced plastics; bending pulsating test
DIN 53390:1988 Testing of glass fibre reinforced plastics; bending test on unidirectional glass fibre reinforced laminated plastics in the form of round bars
DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 50142:1982 Testing of metallic materials; Flat bending fatigue test
DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
DIN 53442:1990-09 Flexural fatique testing of plastics using flat specimens
DIN 50113:1982 Testing of metals; Rotating bar bending fatigue test

American Society for Testing and Materials (ASTM)

ASTM D5365-23 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-99 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-01e1 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-12 Standard Test Method for Long-Term Ring-Bending Strain of ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-06 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-01 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D7774-17 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D7774-22 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM C1464-06(2011) Standard Specification for Bent Glass
ASTM C1464-00 Standard Specification for Bent Glass
ASTM C1464-21 Standard Specification for Bent Glass
ASTM C1464-06 Standard Specification for Bent Glass
ASTM D3681-18 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

GM Europe

GME 8793-2003 Determination of Test Forces for Bending Fatigue Test on Crankshafts

International Organization for Standardization (ISO)

ISO 1143:1975 Metals; Rotating bar bending fatigue testing
ISO 4604:1978 Textile glass; Woven fabrics; Determination of conventional flexural stiffness; Fixed angle flexometer method
ISO 1143:2010 Metallic materials - Rotating bar bending fatigue testing
ISO 1143:2021 Metallic materials - Rotating bar bending fatigue testing
ISO 22407:2021 Metallic materials — Fatigue testing — Axial plane bending method

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

GSO

GSO ISO 1143:2015 Metallic materials -- Rotating bar bending fatigue testing
OS GSO ISO 1143:2015 Metallic materials -- Rotating bar bending fatigue testing
GSO ISO 22407:2024 Metallic materials — Fatigue testing — Axial plane bending method
BH GSO ASTM C1464:2022 Standard Specification for Bent Glass
GSO ASTM C1464:2021 Standard Specification for Bent Glass

RO-ASRO

STAS 5878-1977 Tests of metals ROTATING BAR BENDING FATIGUE TESTING
STAS 7647-1966 Glass. Determination of bending resistance

AGMA - American Gear Manufacturers Association

06FTM01-2006 The Effects of Super Finishing on Bending Fatigue
2000FTM11-2000 UltraSafe Gear Systems - Single Tooth Bending Fatigue Test Results
P229.24-1982 Improvement in the Conventional Analysis of Gear Tooth Bending Fatigue Strength
2000FTM10-2000 Bending Fatigue Investigation under Variable Load Conditions on Case Carburized Gears

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.5.2.5-1998 Test Method 2.4.3.1 Flexural Fatigue and Ductility
IPC TM-650 2.4.2.1-1991 Flexural Fatigue and Ductility, Foil; Revision D - March 1991

American Gear Manufacturers Association

AGMA 06FTM01-2006 The Effects of Super Finishing on Bending Fatigue
AGMA 2000FTM11-2000 UltraSafe Gear Systems - Single Tooth Bending Fatigue Test Results

Indonesia Standards

SNI 07-6525-2001 Methods of plane bending fatigue testing of metal plates
SNI 07-6524-2001 Test methods of rotating bending fatigue testing of metals

IN-BIS

IS 5075-1985 Bending fatigue test method for metal rotating rods

CZ-CSN

CSN ON 70 1511-1964 safety glasscurved
CSN 70 9085-1962 Flat glass Safety glass, hardened bended

ZA-SANS

SANS 1134:1989 Fatigue bending of granulated cork bottom filler for footwear

GM Global

GMW 14439-2012 Steering Wheel Bending (Push/Pull) Fatigue Test Issue 2; English

SE-SIS

SIS SS-ISO 4604:1989 Textile glass — Woven fabrics — Determi- nation of conventional flexural stiffness — Fixed-angle flexometer method
SIS SS 11 23 90-1979 Metallic materials — Rotating bend fatigue test piece — Type Alfa
SIS SS 11 23 72-1979 Metallic materials — Rotating bar bending fatigue testing — Design of test pieces

TIA - Telecommunications Industry Association

TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

(U.S.) Ford Automotive Standards

FORD FLTM BU 013-01-2000 FATIGUE RESISTANCE OF WINDSHIELD AND BACKLIGHT BONDING ADHESIVES
FORD M98G36-A-1990 GLASS SEPARATOR MATERIAL - WINDSHIELD BENDING

(U.S.) Telecommunications Industries Association

TIA TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

ESDU - Engineering Sciences Data Unit

ESDU 81007-2013 Fatigue strength in bending of steel I-beams with welded attachments
ESDU 81007-1981 Fatigue strength in bending of steel I-beams with welded attachments.

API - American Petroleum Institute

API REPORT 90-60-1992 Cyclic Pressure Fatique Evaluation of High Pressure Fiberglass Pipe

RU-GOST R

GOST 10952-1975 Rubber. Methods for determination of fatigue life under variable sign flexure with rotation