Secretosome diameter

Secretosome diameter, Total:439 items.

The international standard classification for "Secretosome diameter" includes: Cylinders , Flanges, couplings and joints , Iron and steel castings , Steel wire, wire ropes and link chains , Pressure vessels, gas cylinders , Semiconducting materials , Gears , Optical equipment .

The Chinese standard classification for "Secretosome diameter" includes: Hydraulic and pneumatic device , Pipeline fittings , Steel wire and wire rope , Profile steel and deformed steel , Pressure vessel , Elemental semiconductor material , Gear and gear drive , Magnifier and microscope .

Professional Standard - Machinery

JB/T 1976-1977 Ferrule type straight through reducer joint body
JB/T 1975-1977 Ferrule type end straight through reducer body
JB/T 12141-2015 Small diameter spiral flute taps
JB/T 12140-2015 Small Diameter Extrusion Taps
JB/T 6509-1992 Specification for small diameter bending pipe
JB/ZQ 4719-2006 Diameter of twist drill for drilling hole before inside whorl treatment or car (bore) hole diameter
JB/T 1977-1977 Ferrule type end right angle reducer joint body
JB/ZQ 4493-2006 Single-pipe clamps with large diameter

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 1025A-2005 A series for diameters of solid rocket motors

Military Standard of the People's Republic of China-General Armament Department

GJB 1025-1990 Solid rocket motor diameter series
GJB 859.7-1990 Reducing diameter straight pipe joint
GJB 1025A-2020 Solid rocket motor diameter series

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 2348-2018 Fluid power systems and components--Cylinder bores and piston rod diameters
GB/T 13402-2019 Large diameter steel pipe flanges

Professional Standard - Chemical Industry

HG 20623-1997（编制说明） Large diameter steel pipe flanges (American system)
HG 20623-1997 Large diameter steel pipe flanges (American system)

Group Standards of the People's Republic of China

T/SZJCH 0003-2022 General Technical Requirements for Cellular Exosomes
T/SSEA 0014-2018 Large diameter thick wall forged pipe
T/FDSA 0049-2024 Specifications： Production and Testing of Exosomes Derived from Human Mesenchymal Stem Cells
T/LNSI 010-2024 Human amniotic mesenchymal stem cell derived exosomes
T/QGCML 4542-2024 Exosome storage tank sealing tester
T/GDCKCJH 044-2021 On-site test methods for diameter and roundness of expanded pipe
T/SHMHZQ 003-2022 General requirements for exosome extraction kits
T/LNSI 011-2024 Human amniotic epithelial stem cell derived exosomes

Professional Standard - Ferrous Metallurgy

YB/T 4332-2013 Large Diameter Carbon Structural Seamless Steel Pipes for Liquid Service
YB/T 4330-2023 Seamless large diameter austenitic stainless steel pipes
YB/T 4330-2013 Large Diameter Seamless Austenitic Stainless Steel Pipes
YB/T 5225-1993 Large diameter steel wire ropes
YB/T 4331-2013 Large Diameter Alloy Structural Seamless Steel Pipes for Liquid Service

Taiwan Provincial Standard of the People's Republic of China

CNS 2-1944 Standard Diameter
CNS 4106-1977 Hydraulic Cylinders Internal Diameters and Piston Rod Diameters
CNS 4245-1978 Clearance Holes for Metric Bolts (1.6 up to and Including 150 mm Thread Diameter)
CNS 5194-1980 Washers with Outside Diameter= 3×Bolt Diameter

Professional Standard - Military and Civilian Products

WJ 1685-1986 Diameter and pitch series of extra-fine threads for instruments (diameter 4-200mm)
WJ 1934-1990 Pipeline system ferrule type equal diameter right angle joint body
WJ 1930-1990 Pipeline system ferrule type equal diameter straight-through joint body
WJ 1932-1990 Piping system ferrule-type reducing straight-through joint body
WJ 1947-1990 Pipeline system welded reducer straight-through joint body
WJ 1945-1990 Pipeline system welded equal diameter straight-through joint body

Professional Standard - Post and Telecommunication

YD/T 2287-2011 Insulated Wires With Conductor Diameter Below 0.8 mm

Hebei Provincial Standard of the People's Republic of China

DB13/T 1354-2010 Determination of Diameter and Diameter Deviation Rate of Nylon 6 Heald

未注明发布机构

DIN EN 764:2002 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
DIN 336:1926 Diameters of drills for minor diameters of tapped threads
DIN ISO 3320 E:2015-02 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series
SAE AS 9842B-2024 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800
DIN EN 764:1994 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
DIN EN 764 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
DIN EN ISO 17829 E:2014-06 Determination of length and diameter of solid biofuel particles (draft)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11256-1989 Large diameter steel wire ropes
GB/T 10088-1988 Module and diameter of cylindrical worm
GB/T 20732-2006 Optical fiber diameter analyser
GB/T 9019-2001 Nominal diameter of pressure vessels
GB/T 13402-2010 Large diameter steel pipe flanges
GB/T 26826-2011(英文版) Measurement for diameter of carbon nanotubes
GB/T 20067-2006 Large diameter steel wire ropes
GB/T 10088-2018 Module and diameter of cylindrical worm
GB/T 9019-2015 Nominal diameter for pressure vessels
GB/T 14140-2009 Test method for measuring diameter of semiconductor wafer
GB/T 13402-1992 Large-diameter carbon steel pipe flanges
GB/T 3364-1982 Test method for diameter and equivalent diameter of carbon fiber by microscope
GB/T 12540-2009 Measurement method of minimum turning diameter, minimum turning circle diameter and sway value of automobiles
GB/T 6108.1-2003 Basic dimensions of winding wires - Part 1: Diameters of conductors for round winding wires

未注明发布机构

DIN EN 764:2002 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
SAE AS 9842B-2024 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800
DIN ISO 3320 E:2015-02 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series
DIN EN ISO 17829 E:2014-06 Determination of length and diameter of solid biofuel particles (draft)
DIN EN 764:1994 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
DIN EN 764 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size
DIN 336:1926 Diameters of drills for minor diameters of tapped threads

Professional Standard - Aviation

HB 2333-1976 Specifications for cylindrical and conical reamers (diameter less than 1 mm)
HB 5983-1986 Reducing Straight Fitting
HB 4-2-1983 Catheter fictitious diameter
HB 5984-1986 Reducing Straight Fitting
HB 2086-1989 Diameter to gauge (D=6~30mm)
HB 5984-1996 Reducing Straight Fitting
HB 4-7-1983 Reducing Straight Fitting
HB 5983-1996 Reducing Straight Fitting
HB 4-7-1999 Reducing Straight Fitting
HB 5983～5985-1996 Reducing Straight Fitting
HB 5681-1982 Reducing Straight Fitting
HB 5684-1983 Reducing Straight Fitting
HB 4-2-1999 Catheter fictitious diameter
HB 2086-1974 Diameter to gauge (D=6~30mm)
HB 5682-1983 Reducing Straight Fitting
HB 5985-1986 Reducing Straight Fitting
HB 5683-1983 Reducing Straight Fitting
HB 4-7-1976 Reducing Straight Fitting
HB 5985-1996 Reducing Straight Fitting
HB 4-2-1976 Catheter fictitious diameter
HB 5681-1983 Reducing Straight Fitting

Heilongjiang Provincial Standard of the People's Republic of China

DB2306/T 155-2021 Technical regulations for body condition management of lactating dairy cows in large-scale pastures

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 20067-2017 Large diameter steel wire ropes

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 883-2015 Mean fiber diameter and fiber diameter distribution determination method Sirolan (sirolan) - laser scanning fiber diameter analyzer method

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 2615-2006 Test Method of Determing Wool and Cashmerer Fibres Diameter by Optical Fibre Diameter Analyser(OFDA)

Professional Standard-Ships

CB 82-1988 Ship shafting journal diameter
CB* 82-1988 Ship shafting journal diameter

Professional Standard - Agriculture

GB/T 9019-1988 Nominal diameter of pressure vessel

TR-TSE

TS 2526-1977 DIAMETERS OF CONDUCTORS FOR ROUND WINDING WIRES
TS 511-1967 Light Metal Rivets for Shipbuilding Nominal Diameters, Rivet Hole Diameters and Clearances
TS 2528-1977 Diameters Of Conductors For Round Resistance Wires

VE-FONDONORMA

NORVEN 55-49-1962 Tighten the diameter of the cylinder

AENOR

UNE 20153:1980 DIAMETERS OF CONDUCTORS FOR ROUND RESISTENCE WIRES
UNE 17702:2002 ISO general-purpose metric screw threads. General plan of diametres and pitches.
UNE 101360:1986 FLUID POWER SYSTEMS AND COMPONENTS. CYLINDER BORES AND PISTON DIAMETERS
UNE 27117:1974 STEEL CABLES WHEELS. THROAT DIAMETER 14 BY CABLE DIAMETER.
UNE 27118:1974 STEEL CABLES WHEELS. THROAT DIAMETER 9 BY CABLE DIAMETER.
UNE-EN 2258:1997 AEROSPACE SERIES. CIRCULAR TUBES FOR FLUIDS IN ALUMINIUM AND ALUMINIUM ALLOYS. DIAMETER 3,2 MM

CZ-CSN

CSN 02 9010-1986 Sealing. Seal housing diameters
CSN 34 7010 Cast.06-1976 Overall diameter and inereas in diameter measurements of winding wires.
CSN 11 0118-1953 Piston diameter
CSN 11 0116-1953 Piston diameter
CSN 11 0150-1989 Circumferential diameters of pumps for drilled wells and their co-ordinati- on to rated inside diameters of wells
CSN 13 6322-1983 Frames 300 mm dlameter
CSN 11 0103-1989 Purnps. Seal housing diameters for end suction centriíugal pumps
CSN 11 0118-1984 Pumps. Diameters of plungers and pistons
CSN 80 0242-1993 Wool. Determination of mean diameter of fibres. Air permeability method
CSN 01 4311-1962 Matching of threads. Deviation of major diameter of bolt thre ad and of minor diameter of nut threada
CSN 22 1102-1965 Drill diameter tolerancea
CSN ON 56 2714-1964 Biscuit diameter. Quality Standard
CSN 10 7015-1980 Vacuum technology. Bore diameters.
CSN 01 4013-1976 Mctric screw threads Basic diameters

YU-JUS

JUS M.C3.320-1989 Plain bearings. Shaft dlameters for unsplit bushes
JUS M.B6.005-1989 Pipeline. name diameter

International Organization for Standardization (ISO)

ISO/R 1051:1969 Rivet shank diameters (diameter range 1 to 36 mm)
ISO 3321:1975 Fluid power systems and components; Cylinder bores and piston rod diameters; Inch series
ISO 3320:1987 Fluid power systems and components; Cylinder bores and piston rod diameters; Metric series
ISO 1051:1999 Rivet shank diameters
ISO 8051:2016 Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess
ISO 17829:2015 Solid Biofuels - Determination of length and diameter of pellets
ISO 8369:1986 Large diameter steel wire ropes
ISO 8051:1999 Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess
ISO 3320:2013 Fluid power systems and components.Cylinder bores and piston rod diameters and area ratios.Metric series
ISO 245:1998 Aerospace - Lockwire - Diameters

German Institute for Standardization

DIN 2248-2:1989 GO gauging members over 40 mm up to 120 mm nominal diameter
DIN 50441-4:1999 Testing of materials for semiconductor technology - Determination of the geometric dimensions of semiconductor wafers - Part 4: Slice diameter, diamter variation, flat diameter, flat length, flat depth
DIN 2249-4:1989 NOT GO cylindrical gauging members over 40 mm up to 120 mm nominal diameter
DIN 6450:1984 Pin punches
DIN 6450:2012 Pin punches
DIN 3977:1981 Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears
DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
DIN 336:2003-07 Diameters of drills for minor diameters of tapped threads
DIN 2248-3:1989 GO segmental cylindrical bar gauging members over 120 mm up to 200 mm nominal diameter
DIN 3977:1981-02 Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears
DIN 61576:1981 Buttons; diameters of buttons
DIN 2248-4:1989 GO gauging members over 40 mm up to 250 mm nominal diameter for use in precision engineering
DIN 2249-3:1989 NOT GO segmental cylindrical bar gauging members over 120 mm up to 200 mm nominal diameter
DIN 2249-2:1989 NOT GO gauging members with spherical ends over 40 mm up to 500 mm nominal diameter
DIN EN ISO 2338:1998 Parallel pins of unhardened steel and austenitic stainless steel (ISO 2338:1997); German version EN ISO 2338:1997
DIN EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
DIN 3357-7:1981 Reduced bore cast iron ball valves
DIN 2247-3:1989 NOT GO plug gauges with cylindrical gauging member over 40 mm up to 120 mm nominal diameter
DIN EN ISO 8735:1998 Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997
DIN 2249-5:1989 NOT GO cylindrical gauging members over 40 mm up to 250 mm nominal diameter for use in precision engineering
DIN ISO 3320:2016 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series (ISO 3320:2013)
DIN 28132:1976 Agitators; diameters of shafts for agitators

AR-IRAM

IRAM OFICIAL 11 N I O-1949 Diameter and other linear standard volumes

Korean Agency for Technology and Standards (KATS)

KS B 3241-1981 Small diameter STRAIGHT SHANK DRILL
KS B 0406-1985 Diameter of Shafts
KS B 0406-1980(2020) Diameter of Shafts
KS B 0406-2020 Diameter of Shafts
KS B 0406-1980 Diameter of Shafts
KS B 2305-2006 Nominal size and bore of valves
KS B ISO 3320:2013 Fluid power systems and components－Cylinder bores and piston rod diameters－Metric series
KS B ISO 3320:2006 Fluid power systems and components-Cylinder bores and piston rod diameters-Metric series
KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
KS D ISO 8369-2002(2012) Large diameter steel wire ropes
KS K 0424-2017 Determination for diameter of cordage
KS K 0424-2011 Determination for diameter of cordage
KS D ISO 8369:2002 Large diameter steel wire ropes
KS K 0424-1972 Determination for diameter of cordage
KS K 0424-2022 Determination for diameter of cordage
KS D ISO 8369:2013 Large diameter steel wire ropes
KS B 3339-2001(2011) Long shank taps with nominal diameters from M3 toM10-Full-diameter shank taps with recess
KS B ISO 789-3-2020 Agricultural tractors－Test procedures－Part 3：Turning and clearance diameters
KS B ISO 273:2010 Diameter of clearance holes and counterbores for bolts and screws
KS B 3339-2013 Long shank taps with nominal diameters from M3 toM10-Full-diameter shank taps with recess
KS W ISO 245:2002 Aerospace-Lockwire-Diameters
KS W ISO 245-2002(2012) Aerospace－Lockwire－Diameters
KS W ISO 245-2016 Aerospace－Lockwire－Diameters
KS W ISO 245:2016 Aerospace－Lockwire－Diameters
KS B ISO 4015-2007(2022) Hexagon head bolts－Product grade B－Reduced shank(shank diameter approximately equal to pitch diameter)
KS D 3588-1999 Large diameter welded stainless steel pipes
KS D 3588-1984 Large diameter welded stainless steel pipes
KS D 3588-2009(2019) Large diameter welded stainless steel pipes

SCC

MIL MIL-DTL-10911/8C-2012 Loudspeaker, Permanent Magnet, (Unencased, 4-Inch Diameter Cone)
AS 2474:1981 Valves for compressed gas cylinders (diameter-indexed outlet)
NS 359:1943 Shaft hole sources and diameter transitions — Hole key radii — Indicative bem
NS 356:1943 Transmission shaft — Diameters
AENOR UNE 17004:1978 METAL RIVETS. SPIN DIAMETERS. (DIAMETERS FROM 1 TO 36 MM INCLUSIVE)
DANSK DS/ISO 1051:2007 Rivet shank diameters
CAN/CSA-ISO 17829:2016 Solid Biofuels — Determination of length and diameter of pellets
NS-EN 16127:2012 Solid biofuels — Determination of length and diameter of pellets
DANSK DS/EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets
AENOR UNE-EN 16127:2012 Solid biofuels. Determination of length and diameter of pellets.
MIL MIL-DTL-10911/3C-2012 Loudspeakers, Permanent Magnet, (Unencased, 8-Inch Diameter Cone) (No S/S Document)
MIL MIL-DTL-10911/2B-2012 Loudspeakers, Permanent Magnet, (Unencased, 6-Inch Diameter Cone) (No S/S Document)
NS 5701:1978 ISO metric trapezoidal screw threads — General plan — Diameters 8 to 300 mm
NS 5902:1979 Fluid power systems and components — Cylinder bores and piston rod diametres
DIN EN 16127 E:2010 Draft Document - Solid biofuels - Determination of length and diameter of pellets; German version prEN 16127:2010
MIL MIL-L-10911/8B-1995 LOUDSPEAKER, PERMANENT MAGNET, (UNENCASED, 4-INCH DIAMETER CONE) (SUPERSEDING MIL-L-10911/8A)
AWWA WQTC59003 Endocrine Disruptor & Pharmaceutical Analysis Using Direct-Injection LC/MS/MS
CAN/CSA-M789.3-1997(R2006) Agricultural tractors - Test procedures - Part 3: Turning and clearance diameters
DANSK DS/ISO 4015:1992 Hexagon head bolts – Product grade B – Reduced shank (shank diameter = pitch diamter)
10/30227677 DC BS EN 16127. Solid biofuels. Determination of length and diameter of pellets
NS-EN ISO 17829:2015 Solid biofuels — Determination of length and diameter of pellets (ISO 17829:2015)
AENOR UNE-EN ISO 17829:2016 Solid biofuels. Determination of length and diameter of pellets. (ISO 17829:2015).
AENOR UNE 26019:1970 Brake drums. Brake surface diameters.
IEC 60182-1:1984 Basic dimensions of winding wires - Part 1: Diameters of conductors for round winding wires
CAN/CSA-N285.6.4-1988 Thin-walled, large-diameter zirconium alloy tubes
IEC 60182-1:1977 Basic dimensions of winding wires - Part 1: Diameters of conductors for round winding wires
IEC 60182-1:1964 Basic dimensions of winding wires - Part 1: Diameters of conductors for round winding wires
BS 1764:1951 Specification for nominal diameters of built-up tins
AENOR UNE 10044:1953 VALVES. NOMINAL ANGLES AND DIAMETERS

HU-MSZT

MSZ 4427-1965 Screw hole drill bit. Single unit specification diameter=10-40
MNOSZ 2872-1953 pipeline. surface diameter
MSZ 203/2-1985 Nominal diameter and spacing
MSZ KGST 2816-1980 Pipe fitting diameter
MSZ 1866-1963 ISO certification system. Standard for holes with surface diameter of 500 mm (or less)
MSZ KGST 1137-1978 Expansion measurement of radius and diameter of wood materials
MSZ KGST 1139-1978 Shrinkage measurement of radius and diameter of wood materials
MNOSZ 6739-1953 300 mm diameter roller
MSZ 1853-1963 ISO mosaic certification system. Basic standard for surface diameter 500 mm
MNOSZ 1328-1952 60 mm diameter hand tools
MSZ 3962-1963 Machine metal hammer diameter=300-600

Society of Automotive Engineers (SAE)

SAE AS9468-2012 PIN, STRAIGHT, HEADED, .497 DIAMETER, AMS5735
SAE AS9844A-2012 PIN, STRAIGHT, HEADED, .1874 DIAMETER, UNS S41800
SAE AS9845-2003 PIN, STRAIGHT, HEADED, .2499 DIAMETER, AMS 5616
SAE AS9842-2003 PIN, STRAIGHT, HEADED, .0937 DIAMETER, AMS 5616
SAE AS9846A-2012 PIN, STRAIGHT, HEADED, .3124 DIAMETER, UNS S41800
SAE AS9848-2003 PIN, STRAIGHT, HEADED, .4999 DIAMETER, AMS 5616
SAE AS9842A-2018 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800
SAE AS9845A-2012 PIN, STRAIGHT, HEADED, .2499 DIAMETER, UNS S41800
SAE AS9843-2003 PIN, STRAIGHT, HEADED, .1249 DIAMETER, AMS 5616
SAE AS9847A-2012 PIN, STRAIGHT, HEADED, .3749 DIAMETER, UNS S41800
SAE AS9843A-2012 PIN, STRAIGHT, HEADED, .1249 DIAMETER, UNS S41800
SAE AS9846-2003 PIN, STRAIGHT, HEADED, .3124 DIAMETER, AMS 5616
SAE AS9848A-2012 PIN, STRAIGHT, HEADED, .49999 DIAMETER, UNS S41800
SAE AS9847-2003 PIN, STRAIGHT, HEADED, .3749 DIAMETER, AMS 5616
SAE AS9463A-2012 PIN, STRAIGHT, HEADED, .186 DIAMETER, CRES, UNS S66286
SAE AS9845C-2020 PIN, STRAIGHT, HEADED, .2499 DIAMETER, CRES UNS S41800
SAE AS9465A-2012 PIN, STRAIGHT, HEADED, .311 DIAMETER, CRES, UNS S66286
SAE AS9464C-2012 PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286
SAE AS9466A-2012 PIN, STRAIGHT, HEADED, .373 DIAMETER, CRES, UNS S66286
SAE AS9467A-2012 PIN, STRAIGHT, HEADED, .436 DIAMETER, CRES, UNS S66286
SAE AS9464C-2005 (R) PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286
SAE AS9462A-2012 PIN, STRAIGHT, HEADED, .124 DIAMETER, CRES, UNS S66286
SAE RS-178-1-1943 RS178 Standard Diameters
SAE AS9844-1999 Pin, Straight, Headed, .1874 Diameter, AMS 5616 FSC 5315
SAE AS9468-1999 PIN, STRAIGHT, HEADED .497 DIAMETER, AMS 5735 FSC 5315
SAE AS102-5-1989 AS102 Handwheel 10" DIA
SAE AS3026-2-1948 AS3026 Ring - Nut - 3.500" Dia.
SAE AS9845-1998 Pin, Straight, Headed, .2499 Diameter, AMS 5616 FSC 5315 R(2003)
SAE AS9466A-2002 (R) Pin, Straight, Headed, .373 Diameter, Cres, UNS S66286
SAE AS63297-2-2004 AS63297 Safety Cable - Ø0,89mm, Reduced End Fitting
SAE AS9843A-2004 (R) PIN, STRAIGHT, HEADED, .1249 DIAMETER, UNS S41800 FSC 5315
SAE AS3014-2-1949 AS3014 Ring Nut - 2.000 Dia.
SAE AS3023-2-1948 AS3023 Ring Nut - 3.125" Dia.
SAE AS3025-2-1948 AS3025 Ring Nut - 3.375" Dia.
SAE AS3027-2-1948 AS3027 Ring Nut - 3.625" Dia.
SAE AS3015-2-1949 AS3015 Ring Nut - 2.125 Dia.
SAE AS3022-2-1949 AS3022 Ring Nut - 3.000 Dia.
SAE AS447-6-1941 AS447 Pipe Clamp Block. (3/4" DIA)
SAE AS3019-2-1949 AS3019 Ring Nut - 2.625 Dia.
SAE AS3030-2-1948 AS3030 Ring Nut - 4.000" Dia.
SAE AS9848A-2004 (R) PIN, STRAIGHT, HEADED, .4999 DIAMETER, UNS S41800 FSC 5315
SAE AS3011-2-1948 AS3011 Ring Nut 1.625" Dia.
SAE AS3013-2-1949 AS3013 Ring Nut - 1.875 Dia.
SAE AS3018-2-1949 AS3018 Ring Nut - 2.500 Dia.
SAE AS3009-2-1948 AS3009 Ring Nut - 1.375" Dia.
SAE AS3008-2-1948 AS3008 Ring Nut - 1.250" Dia.
SAE AS152-6-1950 AS152 Handwheel 3 1/2" DIA
SAE AS3010-3-1948 AS3010 Ring Nut 1.500" Dia.
SAE AS3006-2-1948 AS3006 Ring Nut 1.000" Dia.
SAE AS3029-2-1948 AS3029 Ring Nut - 3.875" Dia.
SAE AS3020-2-1949 AS3020 Ring Nut - 2.750 Dia.
SAE AS3024-2-1948 AS3024 Ring Nut - 3.250" Dia.
SAE AS3028-2-1948 AS3028 Ring Nut 3.750" Dia.
SAE AS3016-2-1949 AS3016 Ring Nut - 2.250 Dia.
SAE AS3004-2-1948 AS3004 Ring Nut - .750" Dia.
SAE AS3005-2-1948 AS3005 Ring Nut .875" Dia.
SAE AS3012-2-1948 AS3012 Ring Nut - 1.750" Dia.
SAE AS3021-2-1949 AS3021 Ring Nut - 2.875 Dia.
SAE AS3007-2-1948 AS3007 Ring Nut - 1.125" Dia.
SAE AS3003-2-1948 AS3003 Ring Nut - .625" Dia.
SAE AS3017-2-1949 AS3017 Ring Nut - 2.375 Dia.
SAE AS9462A-2002 (R) PIN, STRAIGHT, HEADED, .124 DIAMETER, CRES, UNS S66286
SAE AS9463A-2002 (R) Pin, Straight, Headed, .186 Diameter, CRES, UNS S66286
SAE J2122-1998 Numbering System for Single Diameter Drills

SE-SIS

SIS SMS 1724-1965 Drilling diameter
SIS 21 25 60-1973 Drawn round steel wire. Tolerances on diameter
SIS 12 11 24-1958 Round metal wire. Diameter tolerance
SIS SMS 1492-1950 Instrument, brick construction, spherical shape, maximum tolerance, standard diameter 18 to 180
SIS SMS 359-1966 Diametres for flat gaskets for pipe flanges
SIS SMS 1523-1950 Self-turning screws, hole diameter, datum
SIS SMS 324-1975 Pipeline systems. Nominal diameter, DN

SAE - SAE International

SAE AS9847B-2019 PIN@ STRAIGHT@ HEADED@ .3749 DIAMETER@ UNS S41800
SAE AS9847A-2004 PIN, STRAIGHT, HEADED, .3749 DIAMETER, UNS S41800
SAE AS9846A-2004 PIN, STRAIGHT, HEADED, .3124 DIAMETER, UNS S41800
SAE AS9842-1998 Pin@ Straight@ Headed@ .0937 Diameter@ AMS 5616
SAE AS9848-1998 Pin@ Straight@ Headed@ .4999 Diameter@ AMS 5616
SAE AS9846B-2019 PIN@ STRAIGHT@ HEADED@ .3124 DIAMETER@ UNS S41800
SAE AS9842A-2004 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800
SAE AS9848B-2019 PIN@ STRAIGHT@ HEADED@ .49999 DIAMETER@
SAE AS9844A-2004 PIN, STRAIGHT, HEADED, .1874 DIAMETER, UNS S41800
SAE AS9843-1998 Pin@ Straight@ Headed@ .1249 Diameter@ AMS 5616
SAE AS9846-1998 Pin@ Straight@ Headed@ .3124 Diameter@ AMS 5616
SAE AS9847-1998 Pin@ Straight@ Headed@ .3749 Diameter@ AMS 5616
SAE AS9844B-2018 PIN@ STRAIGHT@ HEADED@ .1874 DIAMETER@ UNS S41800
SAE AS9845B-2018 PIN@ STRAIGHT@ HEADED .2499 DIAMETER@ UNS S41800
SAE AS9843B-2018 PIN@ STRAIGHT@ HEADED@ .1249 DIAMETER@ UNS S41800
SAE AS9845A-2004 PIN, STRAIGHT, HEADED, .2499 DIAMETER, UNS S41800
SAE AS9465-1999 Pin@ Straight@ Headed@ .311 Diameter@ AMS 5735 (FSC 5315)
SAE AS9464B-2004 Pin@ Straight@ Headed@ .248 Diameter@ Cres@ UNS S66286 (FSC 5315)
SAE AS9467-1999 Pin@ Straight@ Headed@ .436 Diameter@ AMS 5735 (FSC 5315)
SAE AS9464A-2002 (R) PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286
SAE AS9464-1999 Pin@ Straight@ Headed@ .248 Diameter@ AMS 5735
SAE AS9467A-2002 PIN, STRAIGHT, HEADED, .436 DIAMETER, CRES, UNS S66286
SAE AS9465B-2018 PIN@ STRAIGHT@ HEADED@ .311 DIAMETER@ CRES@ UNS S66286
SAE AS9467B-2018 PIN@ STRAIGHT@ HEADED@ .436 DIAMETER@ CRES@ UNS S66286
SAE AS9464D-2018 PIN@ STRAIGHT@ HEADED@ .248 DIAMETER@ CRES@ UNS S66286
SAE AS9468A-2018 PIN@ STRAIGHT@ HEADED .497 DIAMETER@ AMS5735
SAE AS9466-1999 Pin@ Straight@ Headed@ .373 Diameter@ AMS 5735 (FSC 5315)
SAE AS9466B-2018 PIN@ STRAIGHT@ HEADED@ .373 DIAMETER@ CRES@ UNS S66286
SAE AS9462-1998 Pin@ Straight@ Heated@ .124 Diameter AMS 5735
SAE AS9463B-2018 PIN@ STRAIGHT@ HEADED@ .186 DIAMETER@ CRES@ UNS S66286
SAE AS9463-1999 Pin@ Straight@ Headed@ .186 Diameter@ AMS 5735
SAE AS9462B-2018 PIN@ STRAIGHT@ HEADED@ .124 DIAMETER@ CRES@ UNS S66286
SAE J2122-1990 NUMBERING SYSTEM FOR STANDARD DRILLS
SAE J2122-2019 Numbering System for Single Diameter Drills
SAE J2122-1994 Numbering System for Single Diameter Drills

British Standards Institution (BSI)

BS A 325:1998 Lockwire. Diameters
BS ISO 1051:2000 Rivet shank diameters
BS ISO 1051:1999 Rivet shank diameters
BS EN 16127:2012 Solid biofuels. Determination of length and diameter of pellets
BS EN ISO 17829:2015 Solid biofuels. Determination of length and diameter of pellets
BS 5L 36:1985 Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter)
BS ISO 8051:2016 Long shank taps with nominal diameters from M3 to M10. Full-diameter shank taps with recess
BS ISO 8051:1999 Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess

CH-SNV

SN 235 390-1978 Grundlage dieser Norm ist die von der Internationalen Organi-sation für Normung, ISO, herausgegebene Internationale Norm ISO 2220 -1972.
VSM 18730.1-1965 Straight handle tools. Tool shank diameter and four sides. Outer four corners

RU-GOST R

GOST 885-1977 Twist drills. Diameters
GOST R 54365-2011 Round timber. Top diameter and taper method of volume measurement
GOST R 50288-1992 Pressed snap-gauges for diameters over 10 to 180 mm. Diameters
GOST 21586-1976 Countersinks for machining holes diameters from 3 to 80 mm. Hole tolerance
GOST 21944-1976 Steel colymn uessels. Serie of diameters. Distances between trays
GOST R 55551-2013 Solid biofuels. Determination of length and diameter of pellets
GOST 14990-1969 Circular steel all-cast moulding boxes having inside diameter 1200 mm, height 500 mm. Construction and dimensions
GOST 15013-1969 Circular iron all-cast moulding boxes having inside diameter 1200 mm, height 500 mm. Construction and dimensions
GOST 7918-1975 Tool joints for 50 mm diameter drilling pipes. Specifications
GOST 19258-1973 Bars for threading metric thread. Diameters
GOST 19256-1973 Bars for metric thread rolling. Diameters

GSO

GSO ISO 1051:2015 Rivet shank diameters
OS GSO ISO 1051:2015 Rivet shank diameters
GSO ISO 20401:2013 Pneumatic fluid power systems -- Directional control valves -- Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
GSO ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
BH GSO ISO 17829:2022 Solid Biofuels — Determination of length and diameter of pellets
GSO ISO 245:2013 Aerospace -- Lockwire -- Diameters
GSO ISO 230-6:2008 Test code for machine tools - Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests).
BH GSO ISO 245:2016 Aerospace -- Lockwire -- Diameters

AT-ON

ONORM M 6780-1996 Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears
ONORM ISO 3320:1988 Fluid power Systems and components; cy linder bor es and piston rod diameters; metric series

FI-SFS

SFS 2632-1973 Cylindrical shaft head. Extremely short diameter. Diameter area 10...630mm

Danish Standards Foundation

DS/ISO 1051:2007 Rivet shank diameters
DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
DS/ISO 789/3:1983 Agricultural tractors. Test procedures. Part 3: Turning and clearance diameters
DS/EN 24015:1992 Hexagon head bolt. Product grade B. Reduced shank (Shank diameter approximately equals pitch diameter)
DS/IEC 182-2:1990 Basic dimensions of winding wires. Part 2: Maximum overall diameters of enamelled round winding wires
DS 2390:1993 Centre holes 90 degree. Determination fo dimensions
DS 2389:1993 Centre holes 60 degree. Determination of dimensions

CU-NC

NC 06-20-1968 Sunk keys diameters
NC 09-46-1968 Punches. Diameter up to 7 mm
NC 09-48-1968 Punches. Diameters from 7 to 26 mm
NC 09-49-1968 Punches. Diameter from 26 up to 50 mm
NC 00-05-1968 Preferred diameters and lenghts

ES-AENOR

UNE 18-185-1989 Right cone bearings for general machinery and heavy machinery. Model and diameter passed
UNE 20 043 Flexible conductor braided copper metal wire with a diameter of 0.1 mm
UNE 20-333-1991 Diameters and threads of conduits and fittings for electrical installations
UNE 19 003 Rated diameter of pipe passing

Lithuanian Standards Office

LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
LST ISO 789-3:2001 Agricultural tractors. Test procedures. Part 3: Turning and clearance diameters

Association Francaise de Normalisation

NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
NF EN ISO 17829:2016 Solid biofuels - Determination of pellet length and diameter
NF E04-709*NF ISO 9180:1989 Black leads for wood-cased pencils. Classification and diameters.
NF E03-050:1982 Triangular profile metric screw threads-ISO system of thread tolerances for diameters of 1 to 355 mm (Arithmetical calculation,diameters and limits of tolerances)
NF X34-111:2012 Solid biofuels - Determination of length and diameter of pellets.
NF E64-520:1973 Woodworking machines . Spindle diameters for circular saw blades.
NF E48-019*NF ISO 3320:2014 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series
NF A72-120:1973 Large diameter pipes and valves for gaseous fluids. Flange connections PN 6.
NF E66-107*NF ISO 8051:2016 Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess
NF E27-453:1966 Cap nuts.

GOSTR

GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets
GOST 9617-1976 Vessels and apparatus. Series of diameters

ES-UNE

UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
UNE-EN ISO 4015:2023 Fasteners - Hexagon head bolts with reduced shank (shank diameter ˜ pitch diameter) - Product grade B (ISO 4015:2022)

KR-KS

KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets

NL-NEN

NEN 2486-1966 Open-top cans for milk. Volumes and tooldiameters
NEN 2485-1966 Open-top cans for food-stuffs. Volumes and tooldiameters

European Committee for Standardization (CEN)

EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)

IT-UNI

UNI 1282-1967 pipeline. nominal diameter

ZA-SANS

SANS 5788:2008 Diameter of circular crockery
SANS 5788:1974 Diameter of circular crockery

IETF - Internet Engineering Task Force

RFC 3588-2003 Diameter Base Protocol
RFC 6733-2012 Diameter Base Protocol
RFC 5580-2009 Carrying Location Objects in RADIUS and Diameter
RFC 7683-2015 Diameter Overload Indication Conveyance
RFC 6408-2011 Diameter Straightforward-Naming Authority Pointer (S-NAPTR) Usage

International Federation of Trucks and Engines

NAVISTAR TMS 1061-2014 VOID - Small Diameter Tubing For Engine Air/Fluid Systems

TIA - Telecommunications Industry Association

EIA/TIA-455-167A-1992 FOTP-167 Mode Field Diameter@ Variable Aperture in the Far Field

PL-PKN

PN W89361-1990 Ship's rigging e?uipment Steel wire rop? sheaves of a diameter 9 times the diameter of steel wire rop?
PN BN 2201-01-1964 Pool type equipment. diameter
PN G02075-1993 Rotary frilling of normal diameters. Screw coupling. Casing taper
PN D54010-1966 Tools for woodworking Diame?ers
PN W89362-1990 Ship*s rigging e?uipment Steel wire rop? sheaves of a diameter 14 times the diameter of steel wire rop?, with plain bearings
PN M80005-1972 Steel wire diameter 0,01÷16,0 mm Dimensions
PN H74238-1993 Seamless steel tubing pipes of standard diameter
PN P04930-04-1991 Wool Determination of fibre diameter
PN W89367-1990 Ship s ngging equipment Steel wire rop? sheaves of a diameter 14 times the diameter of steel wire rop?,with roller bearings

American National Standards Institute （ANSI)

ANSI/EIA/TIA 455-167A:1992 Mode Field Diameter Measurement - Variable Aperture Method in the Farfield
ANSI/TIA/EIA 492AAAA-A-1997 Detail Specification for 62.5-um Core Diameter/125-um Cladding Diameter Class 1a Graded-Index Multimode Optical Fibers
ANSI/TIA-492AAAB-A-2009 Detail Specification for 50-�� Core Diameter/125-�� Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers

WRC - Welding Research Council

BULLETIN 497- LARGE DIAMETER RATIO SHELL INTERSECTIONS

IN-BIS

IS 8208-1976 Cylinder bore size and piston rod diameter for fluid power systems
IS 12694-1989 Large diameter wire ropes—Specifications

GM North America

GM 9985482-1989 Wire, Spiral Grooved, Round, 1.10 mm dia

PT-IPQ

NP 2112-1985 Wire rope. Measurement of diameter

RO-ASRO

STAS 11994-1990 CIBCULAR KNITTING MACHINES Nominal diameters
STAS 2099-1989 Pipe componenls NOMINAL JMAMETERS

North Atlantic Treaty Organization Standards Agency

STANAG 3212-1998 DIAMETERS FOR GRAVITY FILLING ORIFICES

BR-ABNT

ABNT MB-895-1980 Train wheels. Diameter detection

Indonesia Standards

SNI 05-2207-1991 Pulleys for flat transmission belt, Diameters
SNI 14-4350-1996 Test method for fibre diameter

Defense Logistics Agency

DLA DSCC-DWG-08010-2008 CABLE, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 75 OHMS, LOW LOSS, LOW SMOKE, DIAMETER .300, DIAMETER .370 (ARMORED)
DLA DSCC-DWG-08009-2008 CABLE, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 75 OHMS, LOW LOSS, LOW SMOKE, DIAMETER .405, (DIAMETER .475 ARMORED)