Exosomes, diameter

Exosomes, diameter, Total:72 items.

The international standard classification for "Exosomes, diameter" includes: Road vehicles in general , Cylinders , Piping and couplings .

The Chinese standard classification for "Exosomes, diameter" includes: Basic standards and general methods , Fastener , Hydraulic and pneumatic device .

Group Standards of the People's Republic of China

T/QGCML 4542-2024 Exosome storage tank sealing tester
T/SZJCH 0003-2022 General Technical Requirements for Cellular Exosomes
T/SHMHZQ 003-2022 General requirements for exosome extraction kits
T/FDSA 0049-2024 Specifications： Production and Testing of Exosomes Derived from Human Mesenchymal Stem Cells
T/LNSI 011-2024 Human amniotic epithelial stem cell derived exosomes
T/LNSI 010-2024 Human amniotic mesenchymal stem cell derived exosomes

Taiwan Provincial Standard of the People's Republic of China

CNS 5194-1980 Washers with Outside Diameter= 3×Bolt Diameter

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12540-2009 Measurement method of minimum turning diameter, minimum turning circle diameter and sway value of automobiles
GB/T 12540-2009 Minimum turning circle diameter minimum turning clearance circle diameter and out value test method for motor vehicles

Professional Standard - Machinery

JB/T 1977-1977 Ferrule type end right angle reducer joint body
JB/T 1975-1977 Ferrule type end straight through reducer body
JB/T 7384.13-1994 Fasteners Diameter Gauge for Circumcircle of Self-tapping Locking Screws
JB/T 1976-1977 Ferrule type straight through reducer joint body

Professional Standard - Aviation

HB 3995-1987 Shank diameter and deviation before cutting out external screw thread

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 1025A-2005 A series for diameters of solid rocket motors

Military Standard of the People's Republic of China-General Armament Department

GJB 1025-1990 Solid rocket motor diameter series
GJB 1025A-2020 Solid rocket motor diameter series

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 2348-2018 Fluid power systems and components--Cylinder bores and piston rod diameters
GB/T 2351-2021 Fluid power systems and components-Outside diameters of tubes and inside diameters of hoses

Professional Standard - Chemical Industry

HG 20623-1997 Large diameter steel pipe flanges (American system)
HG 20623-1997（编制说明） Large diameter steel pipe flanges (American system)

SCC

MIL MIL-DTL-10911/8C-2012 Loudspeaker, Permanent Magnet, (Unencased, 4-Inch Diameter Cone)
MIL MIL-DTL-10911/3C-2012 Loudspeakers, Permanent Magnet, (Unencased, 8-Inch Diameter Cone) (No S/S Document)
MIL MIL-DTL-10911/2B-2012 Loudspeakers, Permanent Magnet, (Unencased, 6-Inch Diameter Cone) (No S/S Document)
MIL MIL-L-10911/8B-1995 LOUDSPEAKER, PERMANENT MAGNET, (UNENCASED, 4-INCH DIAMETER CONE) (SUPERSEDING MIL-L-10911/8A)
MIL MIL-DTL-10911E-2012 Loudspeakers, Permanent Magnet, (Unencased, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, and 12-Inch Diameter Cones), General Specifications for
SN-CEN/TS 17747:2022 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood - DNA, RNA and proteins
DANSK DS/CEN/TS 17747:2022 Molecular in vitro diagnostic examinations – Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood – DNA, RNA and proteins
BS PD CEN/TS 17747:2022 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood. DNA, RNA and proteins

Association Francaise de Normalisation

NF E04-709*NF ISO 9180:1989 Black leads for wood-cased pencils. Classification and diameters.

BE-NBN

NBN I-903-1968 tool. Tools. outside diameter

CH-SNV

VSM 18730.1-1965 Straight handle tools. Tool shank diameter and four sides. Outer four corners

CZ-CSN

CSN 22 2006-1976 Milling cutters. Recommended range of outside diameters
CSN 02 9010-1986 Sealing. Seal housing diameters
CSN 01 4050-1979 Trapezoidal screw threads.Profilas, diametres and pitcli, basic dimensions
CSN 34 7010 Cast.06-1976 Overall diameter and inereas in diameter measurements of winding wires.

PL-PKN

PN S91244-1971 Motor-cycles Wheel rim pro?ils and diameters

AT-ON

ONORM M 1820-1980 Pipe unions; externa! diameters of tubes and threads

US-FCR

FCR 21 CFR PART 876-2013 GASTROENTEROLOGY-UROLOGY DEVICES
FCR 21 CFR PART 876-2015 GASTROENTEROLOGY-UROLOGY DEVICES
FCR 21 CFR PART 876-2014 GASTROENTEROLOGY-UROLOGY DEVICES

TR-TSE

TS 2526-1977 DIAMETERS OF CONDUCTORS FOR ROUND WINDING WIRES

VE-FONDONORMA

NORVEN 55-49-1962 Tighten the diameter of the cylinder

ES-AENOR

UNE 10-007-1985 Generator housing diameter and installation method
UNE 10-008-1985 Start the engine. Housing diameter and mounting type

International Organization for Standardization (ISO)

ISO 3764:1976 Timekeeping instruments — Casing diameters for round movements
ISO/R 1051:1969 Rivet shank diameters (diameter range 1 to 36 mm)

IN-BIS

IS 8079-1976 Operating table, surgery, urology specifications

PT-IPQ

NP 253-1985 Matériaux plastiques. Tubes en matlères thermoplastiques pour le transport des fluides. Diamètres extérieurs nominaux et pressions nomlnales

American Society for Testing and Materials (ASTM)

ASTM C585-10(2016) Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

AENOR

UNE 20153:1980 DIAMETERS OF CONDUCTORS FOR ROUND RESISTENCE WIRES

IT-UNI

UNSIDER 30-1960 Steel Pipe. Ordinary series with outer diameter 10.2-419mm

HU-MSZT

MSZ 22008-1984 Determination of tire outer diameter and professional width

British Standards Institution (BSI)

BS EN 4641-301:2022 Aerospace series. Cables, optical 125 μm diameter cladding. Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter. Product standard
PD CEN/TS 17747:2022 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood. DNA, RNA and proteins

YU-JUS

JUS M.C3.320-1989 Plain bearings. Shaft dlameters for unsplit bushes

ES-UNE

UNE-CEN/TS 17747:2022 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood - DNA, RNA and proteins (Endorsed by Asociación Española de Normalización in June of 2022.)

European Committee for Standardization (CEN)

FprCEN/TS 17747-2021 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood - DNA, RNA and proteins
prCEN ISO/TS 18702 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood - DNA, RNA and proteins
CEN/TS 17747:2022 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood - DNA, RNA and proteins

German Institute for Standardization

DIN CEN/TS 17747:2022-08 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood - DNA, RNA and proteins; German version CEN/TS 17747:2022
DIN 2248-2:1989 GO gauging members over 40 mm up to 120 mm nominal diameter
DIN 57472-401:1984 Testing of cables, wires and flexible cords; outer dimensions [VDE Specification]

SE-SIS

SIS SS-ISO 4397:1985 Fluid power systems and components — Connectors and associated components — Outside diameters of tubes and inside diameters of hoses

AR-IRAM

IRAM OFICIAL 11 N I O-1949 Diameter and other linear standard volumes

UY-UNIT

UNIT 657-1982 Measuring the outer diameter of high-density polyethylene pipes

Korean Agency for Technology and Standards (KATS)

KS B 3241-1981 Small diameter STRAIGHT SHANK DRILL
KS B 0406-1985 Diameter of Shafts
KS B 0406-1980(2020) Diameter of Shafts
KS B 0406-1980 Diameter of Shafts
KS B 0406-2020 Diameter of Shafts

The American Road & Transportation Builders Association

AASHTO M 326-2008 Standard Specification for Polyethylene (PE) Liner Pipe, 300- to 1600-mm Diameter, Based on Controlled Outside Diameter