Molding agent styrene

Molding agent styrene, Total:220 items.

The international standard classification for "Molding agent styrene" includes: Cellular materials , Adhesives , Thermoplastic materials .

The Chinese standard classification for "Molding agent styrene" includes: Synthetic resin and plastic , Adhesives .

Group Standards of the People's Republic of China

T/CPPIA 6-2021 Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene--Gas Chromatography-Mass Spectrometry
T/CSTM 00480-2021 Molded polystyrene thermal insulation permanent formwork

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27561-2011 Styrene-butadiene-styrene block copolymers(SBS) adhesives
GB/T 10801.1-2021 Moulded polystyrene foam for thermal insulation（EPS）
GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials
GB/T 10801.1-2002 polystyrene foam board for thermal insulation

Professional Standard - Petrochemical Industry

SH 1504-1992 Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Compound Nomenclature
SH 1540-1993 Styrene/Acrylonitrile (SAN) Copolymer Molding and Extrusion Nomenclature
SH 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH/T 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH/T 1504-1992 Acrylonitrile-butadiene-styrene (ABS) molding and extrusion materials classification nomenclature

未注明发布机构

DVS 2291:2010-02 Training for solvent adhesives used in PVC-U and ABS pipe joints

Taiwan Provincial Standard of the People's Republic of China

CNS 11338-1985 Method of Test for Acrylonitrile-Butadiene-Styrene Sheets
CNS 11337-1985 Acrylonitrile-Butadiene-Styrene (ABS) Sheets

Professional Standard - Light Industry

QB/T 5593-2021 Determination of retained blowing agent in extruded polystyrene foam

Professional Standard - Building Materials

JC/T 2441-2018 Graphite modified expanded polystyrene foam board for building thermal insulation

Hebei Provincial Standard of the People's Republic of China

DB13/T 2582-2017 General technical requirements for graphite molded polystyrene foam board

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2836-2017 Method for rapid on-site testing of molded polystyrene foam for weight gain insulation with aqueous penetrant

Jilin Provincial Standard of the People's Republic of China

DB22/T 5011-2018 Engineering technical standard for external wall insulation of molded polystyrene foam board

German Institute for Standardization

DIN 7741 Beiblatt:1968 Polystyrene Moulding Compound Properties of Polystyrene Moulding Compound Test Pieces
DIN 7741-1:1968 Poly(styrene) moulding materials based on styrene homopolymers
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 19065-2:2018-03 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN 16771-2:1988 Plastic moulding materials - Preparation of test specimens and determination of properties of styrene butadiene (S/B) moulding materials
DIN EN ISO 19064-2 E:2019-04 Plastic Styrene Acrylonitrile (Draft)
DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN ISO 19065-1:2015-03 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN ISO 24022-2 E:2019-04 Plastic polystyrene (draft)
DIN 7749-2:1988 Plastic molding materials Polyvinyl chloride (PVC-P) molding materials containing plasticizers
DIN EN ISO 19062-2 E:2018-03 Plastics Acrylonitrile Butadiene Styrene (Draft)
DIN 55471-2:1987 Cellular polystyrene for packaging; design of moulded packaging
DIN EN ISO 19065-2 E:2018-03 Plastics Acrylonitrile Styrene Acrylate (Draft)
DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

GM Holden Ltd

HOLDEN HN 1459-2001 Polystyrene Moulding Compounds
HOLDEN HN 1577-2001 Moulding Compound - Styrene Acrylonitrile (SAN)
HOLDEN HN 1426-2002 Ethylene Vinyl Acetate Moulding Compound
HOLDEN HN 2198-2000 Foam - Polystyrene - PPO
HOLDEN HN 1136-2001 Polyethylene Moulding Compounds
HOLDEN HN 1136-2012 Polyethylene Moulding Compound

Japanese Industrial Standards Committee (JISC)

JIS K 6870:1995 Polystyrene moulding materials
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6934-1:1999 Plastics -- Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials -- Part 1: Designation
JIS K 6869:1999 Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
JIS K 6934-1:2006 Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications

British Standards Institution (BSI)

BS 1493:1958 Specification for polystyrene moulding materials
BS 1493:1967 Specification for polystyrene moulding materials
BS 1493:1948 Specification for polystyrene moulding materials
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
BS 3126:1959 Specification for toughened polystyrene moulding materials
BS EN ISO 6402-2:2003(2004) Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
BS 4936:1974 Specification for styrene-acrylonitrile (SAN) moulding and extrusion materials
BS 4935:1974 Specification for acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
BS ISO 4894-1:1990 Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials-Designation
BS 4936:1987 Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials
BS EN ISO 19065-2:2019 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Preparation of test specimens and det...
BS EN ISO 2580-2:2000 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 2580-2:2003 Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS 4935:1989 Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
BS ISO 2897-1:1990 Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials-Designation
BS EN ISO 1622-2:1999 Plastics - Polystrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1622-1:1995 Plastics. Polystrene (PS) moulding and extrusion materials. Designation system and basis for specifications
BS ISO 2561:2023 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 2561:2006 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS EN ISO 2580-1:1999 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials-Designation system and basis for specifications
BS EN ISO 1622-1:2012 Plastics. Polystyrene (PS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 1622-2:1996 Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2580-1:2001 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials-Designation system and basis for specifications
BS ISO 2580-2:1995 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
BS EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties

Society of Automotive Engineers (SAE)

SAE AMS3620 Plastic Moldings and Extrusions-Polystyrene
SAE AMS3620B Plastic Moldings and Extrusions-Polystyrene
SAE AMS3620A Plastic Moldings and Extrusions-Polystyrene
SAE AMS3620B-1987 Plastic Moldings and Extrusions-Polystyrene
SAE AMS3620-1946 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene
SAE AMS3620A-1953 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene

Korean Agency for Technology and Standards (KATS)

KS M 3845-2010(2020) Plastics－Recycled moulding materials－Acrylonitrile/butadiene/styrene(ABS)
KS M ISO 1622-2:2008 Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M 3845-2010 Plastics-Recycled moulding materials-Acrylonitrile/butadiene/styrene(ABS)
KS M 3360-2001 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
KS M ISO 2561-2023 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561-2013(2023) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography

PL-PKN

PN C89112-01-1992 Plastics. Acrylonitryle/butadiene/styene (ABS) moulding and extrusion materials. Designation

GM Europe

GME QK 000202-1983 Polystyrol - Formmasse, schlagfest Polystyrene - Moulding Compounds, Impact Resistant German
GME QK 000211-1998 Polystyrene - Moulding Compound, Impact Resistant (English/German)
GME QK 000269-1999 Acrylonitrile-Butadiene-Styrene Copolymer (ABS) Molding Compound English/German
GME QK 000288-2005 ABS-Moulding Compound (English/German)
GME QK 000317-1983 ABS-Formmasse ABS-Moulding Compounds English/German
GME QK 000753-1998 Modified thermoplastic elastomer materials based on styrene-ethylene/butylene-styrene. English/German
GME STD 518832-1997 Plastic 8832 PS Plastic sheet with adhesive Plast 8832 PS Plastskiva med h鋐t鋗ne English/Swedish
GME STD 518783-1996 Cellular plastic 8783 PS+PPO Cellplast 8783 PS+PPO

Association Francaise de Normalisation

NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T51-912:1980 PLASTICS. POLYSTYRENE MOULDING AND EXTRUSION MATERIALS. DETERMINATION OF PROPERTIES.
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF T53-033-1:1991 PLASTICS. ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION.
NF T56-201:1988 Plastics. Rigid cellular materials in the form of expanded polystyrene sheets obtained by casting. Specifications.

TR-TSE

TS 3435-1979 PLASTICS - POLYSTYRENE MOULDING AND EXTRUSION MATERIALS - DESIGNATION
TS 3421-1979 PLASTICS—ACRYLONITRILE—BUTADIENE-^STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS- PART I : DESIGNATION
TS 2489-1977 POLYSTYRENE MOULDING MATERIAL
TS 340-1966 PLASTICS DETERMINATION OF THE PERCENTAGE OF STYRENE ?N POLYSTYRENE WITH WIJS SOLUTION

International Organization for Standardization (ISO)

ISO 1622:1975 Plastics — Polystyrene moulding and extrusion materials — Designation
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 2580-1:1978 Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation
ISO 2580-1:1990 Plastics; acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials; part 1: designation
ISO 1622-2:1980 Plastics; Polystyrene moulding and extrusion materials; Part 2 : Determination of properties
ISO/R 173:1961 Withdrawal of ISO/R 173-1961
ISO 1622-1:1985 Plastics; Polystyrene (PS) moulding and extrusion materials; Part 1 : Designation
ISO 4894-1:1979 Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 1: Designation
ISO/FDIS 2561:2023 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/DIS 2561:1975 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2897-1:1990 Plastics; impact-resistant polystyrene (SB) moulding and extrusion materials; part 1: designation
ISO 2561:2012 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 4894-2:1981 Plastics; Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials; Part 2 : Determination of properties
ISO 2561:2006 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2580-2:1982 Plastics; Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials; Part 2 : Determination of properties

American Society for Testing and Materials (ASTM)

ASTM D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D6865-04 Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
ASTM D6339-98 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ASTM D633-11(2016) Standard Volume Correction Table for Road Tar
ASTM D2235-21 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
ASTM D4673-02(2008) Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
ASTM D5676-99 Standard Specification for Recycled Polystyrene Molding and Extrusion Materials
ASTM D3122-95(2009) Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
ASTM D6865-17 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Ex
ASTM D4549-15(2021) Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

GM North America

GM GM6065M-1986 Polystyrene Plastic Molding Compounds Replaced by GM7001M
GM 9985206-1980 Adhesive - Styrene
GM GM6055M-1986 Polystyrene Plastics Replaced by GM7000M

European Committee for Standardization (CEN)

EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 2580-1:1999 Plastics - Acrylonitrile/Butadiene/Styrene (ABS) Moulding and Extrusion Materials Part 1: Designation System and Basis for Specifications ISO 2580-1:1997
EN ISO 2580-1:2000 Plastics - Acrylonitrile/Butadiene/Styrene (ABS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications ISO 2580-1:2000

Spanish Association for Standardization (UNE)

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Danish Standards Foundation

DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...

Ente Nazionale Italiano di Unificazione

UNI EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determina...
UNI EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificat...
UNI ISO 1622-1:1990 Plastics. Polystyrene (PS) moulding and extrusion materials. Designation.

Standards Norway

NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

GCC Standardization Organization

GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography

American National Standards Institute （ANSI)

ANSI/ASTM D6339:1998 Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ANSI/ASTM D4673:1998 Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Materials, Specification for (08.03)
ANSI/ASTM D4549:1985 Specification for Polystyrene Molding and Extrusion Materials (PS) (95-1, Item 24) (08.03)
ANSI/ASTM D5676:1999 Specification for Recycled Polystyrene Molding and Extrusion Materials (08.03)
ANSI/ASTM D3122:1995 Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
ANSI/ASTM D3139:1996 Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

Swedish Institute for Standards

SS-EN ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
SS-EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography

U.S. Military Regulations and Norms

ARMY MIL-P-60312 C NOTICE 2-2009 PARTS, MOLDED, PLASTIC FORM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312C (2)-1986 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312C-1975 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312 C (2)-1986 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312 C-1975 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY L-P-527 B NOTICE 2-2013 PLASTIC SHEET, STYRENE-BUTADIENE
ARMY MIL-P-21922 B-1973 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B (1)-1974 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B VALID NOTICE 1-1988 PLASTIC RODS AND TUBES, POLYETHYLENE

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BH GSO ISO 2561:2016 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography

US-FCR

FCR FED PS31-70-1971 POLYSTYRENE PLASTIC SHEET

CEN - European Committee for Standardization

EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 2580-1:2002 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

GM Daewoo

GMKOREA EDS-M-6645-2012 Polystyrene foam molded roof liner composite
GMKOREA EDS-M-4315-2012 Blow molding acrylonitrile-butadiene-styrene copolymer

FI-SFS

SFS 4388-1979 plastic. Polystyrene. Determination of styrene content depicted by vaporized chromium

CZ-CSN

CSN 64 3510 Z2-1996 plastic. brick expanded polystyrene
CSN 64 0321-1963 Testing of polystyrene hermoplastics

(U.S.) Ford Automotive Standards

FORD WSS-M4D682-A7-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE (ASA+PC) MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D833-B1-2014 ACRYLONITRILE STYRENE ACRYLATE (ASA), MOLDED IN COLOR, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D483-D1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND, GENERAL PURPOSE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D483-D1-2014 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND, GENERAL PURPOSE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D483-C1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND, GENERAL PURPOSE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***