Foreign inspection level

Foreign inspection level, Total:160 items.

The international standard classification for "Foreign inspection level" includes: Application of statistical methods , Cereals, pulses and derived products .

The Chinese standard classification for "Foreign inspection level" includes: Length Measurement , Mathematics , Cereal crop and forage crop in general , Slotting, broaching, planing and sawing machines .

Fujian Provincial Standard of the People's Republic of China

DB35/T 1751-2018 Quarantine rules for imported narcissus from abroad

Taiwan Provincial Standard of the People's Republic of China

CNS 474-1988 Method of Test for Flat Asbestos Cement Sheet
CNS 5653-1980 Method of Test for Level Gauge
CNS 8170-1994 Method of Test for Flat Pallets
CNS 11470-1985 Method of Test for Balancing Beams
CNS 11700-1986 Method of Test for Asbestos Cement Sidings
CNS 824-1965 Methods of Inspection for Ordinary Sheet Glass
CNS 15077-1-2007 Test conditions for machining centers - Part 1 : Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
CNS 7053-1981 Methods of Test for Industrial Waste Water (Appearance and Phyaical Properties)

Professional Standard - Commodity Inspection

SN/T 0816-1999 Rules for the inspection of leveling rulers for export
SN/T 1546-2005 Rules of inspection for export oil of rose (Rosa sertata × Rosa rugosa)

Military Standard of the People's Republic of China-General Armament Department

GJB 3882-1999 Inspection and acceptance rules for azimuth levels of surface ships

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8052-2002 Single and multi - level continuous sampling procedures and tables for inspection by attributes
GB/T 24898-2010 Inspection of grain and oils—Determination of moisture content in wheat—Near-infrared method
GB/T 24900-2010 Inspection of grain and oils—Determination of moisture content in maize—Near-infrared method
GB/T 16306-2008 Re-inspection and re-test procedures for assessment of declared quality levels
SN/T 4743.4-2017 InsPection and quarantine procedure for pre-export quarantine of race horses in international equestrian events

Group Standards of the People's Republic of China

T/CTSS 6-2020 Evaluation regulation for level of Chinese Tea Ceremony
T/SXS 058-2024 Evaluation standard of sinology literacy level
T/ACCIA 0005-2017 The Rating of Professional Level of Children 's Art of China— traditional Chinese painting landscape

Professional Standard - Machinery

JB/T 12197-2015 level tester
JB/T 12198-2015 Zero level calibrator
JB/T 5758.1-2008 Traverse head shaping machines—Part 1:Testing of the accuracy

National Metrological Verification Regulations of the People's Republic of China

JJG 258-1988 Verification Regulation of Horizotal Spiral Blade Water Meter
JJG 191-2018 Verification Regulation of Calibrators for Levels
JJG 191-1979 Verification Regulation of Calibrators for the Levels
JJG(轻工) 94-1992 Verification rules for horizontal carpet burning test device
JJG 191-2002 Verification Regulation of Calibrators for the levels

Professional Standard - Electron

SJ 20712-1998 Single-and multi-level continuous sampling procedures and tables for inspection by attributes

NL-NEN

NEN-ISO 2244:1993 Packaging. Complete, filled transport packages. Horizontalimpact tests (horizontal or inclined plane test. Pendulum test) (ISO 2244:1985)

Magyar Szabványügyi Testület

MSZ 9695/2-1975 Waterproof inspection, appearance confirmed
MSZ 12438-1982 International, plane switching equipment testing

German Institute for Standardization

DIN 38410-2-Beiblatt 1:1990 Germany unifies water quality testing methods
DIN EN ISO 23277:2015-06 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015); German version EN ISO 23277:2015
DIN EN ISO 23278:2015-06 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015); German version EN ISO 23278:2015
DIN 38408-21:1984 Germany unifies water, wastewater and sludge testing methods
DIN EN ISO 11666:2018-05 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018); German version EN ISO 11666:2018
DIN 38412-37:1999-04 German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 37: Determination of the inhibitory effect of water on the growth of bacteria (Photobacterium phosphoreum cell multiplication inhibition test) (L...
DIN EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
DIN 38414-23:2002-02 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 23: Determination of 15 polycyclic aromatic hydrocarbons (PAH) by high performance liquid chromatography (HPLC) and fluorescence detect...
DIN 38411-1:1983 German standard methods for the examination of water, waste water and sludge; Microbiological methods (Group K); Preparation for the microbiological examination of water samples (K1)
DIN EN ISO 23278 E:2013-02 Magnetic particle testing acceptance levels for non-destructive testing of welds (draft)
DIN EN 1712 E:2007-08 Draft Document - Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels; German version prEN 1712:2007
DIN EN 1712 E:2007 Draft Document - Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels; German version prEN 1712:2007
DIN EN ISO 11666 E:2017 Draft Document - Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO/DIS 11666:2017); German and English version prEN ISO 11666:2017
DIN 38407-35:2010-10 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 35: Determination of selected phenoxyalkyl carbonic acids and further acid plant treatment agents - Method using high perfor...
DIN 38407-22:2001-10 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 22: Determination of Glyphosate and Aminomethyl phosphic acid (AMPA) by high performance liquid chromatography (HPLC), post-...
DIN 38402-62 E:2013 Draft Document - German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 62: Plausibility check of analytical data by performing an ion balance
DIN 38407-44:2018-02 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 44: Determination of selected heterocyclic aromatic hydrocarbons (NSO heterocycles) in water - Method using gas chromatograp...
DIN 38407-37:2013-11 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 37: Determination of organochlorine pesticides, polychlorinated biphenyls and chlorobenzene in water - Method using gas chro...
DIN EN ISO 23278:2010 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006); German version EN ISO 23278:2009
DIN 38407-36:2014-09 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 36: Determination of selected active substances of plant protection products and other organic substances in water - Method ...
DIN 38407-39:2011-09 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 39: Determination of selected polycyclic aromatic hydrocarbons (PAH) - Method using gas chromatography with mass spectrometr...
DIN 38407-44 E:2016-03 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 44: Determination of selected heterocyclic aromatic hydrocarbons (NSO heterocycles) in water - Method using gas chromatograp...
DIN 54333-1:1981 Testing of textiles; determination of burning behaviour; horizontal method; ignition at the edge of the specimen
DIN EN 1289:1998 Acceptable Levels of Non-Destructive Weld Inspection Penetrant Testing
DIN EN 1712_2002 Acceptance levels for non-destructive ultrasonic testing of welded joints
DIN 38407-42:2011-03 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 42: Determination of selected polyfluorinated compounds (PFC) in water - Method using high performance liquid chromatography...
DIN 876-2:1984 Surface plates; cast iron surface plates, requirements and testing
DIN EN ISO 19285:2017-12 Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017); German version EN ISO 19285:2017
DIN EN ISO 19285:2017 Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017)
DIN EN ISO 23278 E:2013 Draft Document - Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO/DIS 23278:2013); German version prEN ISO 23278:2013
DIN EN ISO 23277 E:2013 Draft Document - Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO/DIS 23277:2013); German version prEN ISO 23277:2013

British Standards Institution (BSI)

BS EN 1712:1997 Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
BS EN ISO 17640:2017 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS EN ISO 17640:2010 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS EN 1289:1998(2004) Non - destructive testing of welds — Penetrant testing of welds — Acceptance levels
BS EN 1291:1998(2004) Non - destructive testing of welds — Magnetic particle testing of welds — Acceptance levels
BS EN 1712:1997(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints — Acceptance levels
BS EN ISO 10675-2:2017 Non-destructive testing of welds. Acceptance levels for radiographic testing. Aluminium and its alloys
BS 6001-1:1991 Sampling procedures for inspection by attributes-Specification for sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
BS EN ISO 10675-2:2013 Non-destructive testing of welds. Acceptance levels for radiographic testing. Aluminium and its alloys

GB-REG

REG 7 CFR PART 319-2012 FOREIGN QUARANTINE NOTICES

Association Francaise de Normalisation

NF A89-541:1998 Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels.
NF A89-551:1998 Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels.
NF A89-551*NF EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels
NF A89-541*NF EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels
NF A89-521*NF EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
NF A89-521:1997 Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.
NF A89-511:1998 Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels.
NF EN ISO 23277:2015 Contrôle non destructif des assemblages soudés - Contrôle par ressuage - Niveaux d'acceptation
NF EN ISO 11666:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Niveaux d'acceptation
NF A89-513*NF EN ISO 19285:2017 Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels
NF EN ISO 23278:2015 Contrôle non destructif des assemblages soudés - Contrôle par magnétoscopie - Niveaux d'acceptation
NF EN ISO 17640:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Techniques, niveaux d'essai et évaluation

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 23277:2022 Non-destructive testing of welds — Penetrant testing — Acceptance levels
BH GSO ISO 11666:2017 Non-destructive testing of welds -- Ultrasonic testing -- Acceptance levels

GCC Standardization Organization

GSO ISO 23278:2008 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
GSO ISO 23277:2021 Non-destructive testing of welds — Penetrant testing — Acceptance levels
GSO ISO 11666:2015 Non-destructive testing of welds -- Ultrasonic testing -- Acceptance levels
GSO ISO 19285:2021 Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels
GSO 375:1994 CODE OF PRACTICE FOR THE INSPECTION AND TESTING OF STEAM AND HOT WATER BOILERS -- PART 5: PERIODIC EXTERNAL INSPECTION

Danish Standards Foundation

DANSK DS/EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels
DS/EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
DANSK DS/EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015)
DANSK DS/EN ISO 11666:2018 Non-destructive testing of welds – Ultrasonic testing – Acceptance levels (ISO 11666:2018)
DS/EN ISO 23277:2010 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
DS/EN ISO 23278:2010 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
DANSK DS/EN 1712:1998 Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
DANSK DS/EN ISO 19285:2017 Non-destructive testing of welds – Phased array ultrasonic testing (PAUT) – Acceptance levels (ISO 19285:2017)

Ente Nazionale Italiano di Unificazione

UNI EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels
UNI EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
UNI EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
UNI EN 1289:2003 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
UNI EN 12517:1999 Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels

Spanish Association for Standardization (UNE)

UNE-EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
UNE-EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015)
UNE-EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
AENOR UNE-EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
AENOR UNE-EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015)
UNE-EN ISO 23278:2010 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006)
UNE-EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
UNE-EN ISO 23277:2010 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006)
UNE-EN ISO 19285:2018 Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017)

Japanese Industrial Standards Committee (JISC)

JIS B 6211:1999 Internal cylindrical grinding machines with horizontal spindle -- Testing of the accuracy
JIS B 6211:2006 Test conditions for internal cylindrical grinding machines with horizontal spindle -- Testing of the accuracy
JIS B 6213:1999 Horizontal grinding wheel spindle and reciprocating table type surface grinding machines -- Testing of the accuracy
JIS B 6213:2006 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table -- Testing of the accuracy

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 11666:2015 Non-destructive testing of welds -- Ultrasonic testing -- Acceptance levels
OS GSO ISO 23278:2008 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels

Association of German Mechanical Engineers

VDI VDE DGQ 2618 Blatt-17-1 E:2013-09 Measuring and testing equipment inspection - Horizontal length measuring machine inspection instructions
VDI VDE DGQ 2618 Blatt 17-1-2014 Test instructions for horizontal length measuring machines with digital display
VDI VDE DGQ 2618 Blatt 17-1 Berichtigung-2015 Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines

International Organization for Standardization (ISO)

ISO 10791-1:2015 Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
ISO 17640:2017 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 17640:2010 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 23277:2006/DAmd 1 Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels — Amendment 1
ISO 23277:2006/DAmd 2 Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels — Amendment 2
ISO 23278:2006/DAmd 1 Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels — Amendment 1
ISO 23278:2006/DAmd 2 Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels — Amendment 2

Society of Automotive Engineers (SAE)

SAE AIR4964-2019 Exposure Levels of UV Radiation in Nondestructive Inspection Processes
SAE AIR4964-1998 Exposure Levels of UV Radiation in Nondestructive Inspection Processes

VN-TCVN

TCVN 7688-2007 Test conditions for internal cylindrical grinding machines with horizontal spindle.Testing of accuracy

Standards Norway

NS-EN ISO 23278:2015 Non-destructive testing of welds — Magnetic particle testing — Acceptance levels (ISO 23278:2015)
NS-EN ISO 23277:2015 Non-destructive testing of welds — Penetrant testing — Acceptance levels (ISO 23277:2015)
NS 1493:1971 Outside hinged coupled casement door - Type UK
NS-EN ISO 11666:2018 Non-destructive testing of welds — Ultrasonic testing — Acceptance levels (ISO 11666:2018)
NS-EN ISO 11666:2010 Non-destructive testing of welds — Ultrasonic testing — Acceptance levels (ISO 11666:2010)
NS-EN 1712:1997 Non destructive examination of welds — Ultrasonic examination of welded joints — Acceptance levels
NS-EN ISO 23278:2009 Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels (ISO 23278:2006)
NS-EN ISO 23277:2009 Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels (ISO 23277:2006)
NS-EN 1291:1998 Non-destructive examination of welds — Magnetic particle testing of welds — Acceptance levels
NS-EN ISO 19285:2017 Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels (ISO 19285:2017)

Lithuanian Standards Office

LST EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
LST EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
LST EN ISO 23277:2010 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006)
LST EN ISO 23278:2010 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006)

US-FCR

FCR COE RPMAS 61580-1977 WATER BALANCE INSPECTION OF SEWER LINES

Swedish Institute for Standards

SS-EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)

Military Standards (MIL-STD)

MIL MIL-DTL-41819/6F-2013 Ribbon Attachment, Additional Civilian Award, U.S. Air Force
MIL MIL-DTL-41819/6G-2018 Ribbon Attachment, Additional Civilian Award, U.S. Air Force

Korean Agency for Technology and Standards (KATS)

KS B ISO 19285-2023 Non-destructive testing of welds — Phased array ultrasonic testing(PAUT) — Acceptance levels

PL-PKN

PN BN 7112-04-1966 Flat cut panels of foreign trees. walnut panel
PN BN 7112-05-1966 Flat cut foreign wood panels. Mahogany panel

Acoustical Society of America (ASA)

ASA S2.60-1987(R2005) American National Standard Balancing Machines - Enclosures and Other Safety Measures

U.S. Military Regulations and Norms

ARMY MIL-DTL-41819/6 F-2013 RIBBON ATTACHMENT, ADDITIONAL CIVILIAN AWARD, U. S. AIR FORCE

BELST

STB 8072-2018 System for ensuring the uniformity of measurements of the Republic of Belarus. Levels optical and leveling rod. Methods of verification

American Water Works Association (AWWA)

ANSI/AWWA B403-16 Errata 2018 Aluminum Sulfate—Liquid, Ground, or Lump
AWWA DSS58710 Leak Detection and Water Accountability: Kingdom of Bahrain Experience

US-CFR-file

CFR 9-590.915-2014 Animals and animal products. Part590:Inspection of eggs and egg products (egg products inspection act). Section590.915:Foreign inspection certificate requirements.

Others: Foreign inspection level,Foreign medical examination,Foreign third-party inspection,inspection level,Intelligent inspection of foreign special equipment,Proficiency testing platform,Proficiency testing platform,Foreign inspection industry,Foreign special equipment inspection,Foreign Food Inspection,Foreign inspection department,Foreign inspection and testing,Test level g2,Terahertz foreign development level