iso pipe thread

iso pipe thread, Total:200 items.

The international standard classification for "iso pipe thread" includes: Dividing and tool-workpiece holding devices , Taps and threading dies , Measuring instruments , Special screw threads , Tobacco, tobacco products and related equipment .

The Chinese standard classification for "iso pipe thread" includes: Measuring tool and instrument , Cutting tools , Basic standards and general methods , Tobacco curing machinery .

Professional Standard - Machinery

JB/T 9995-1999 Taper tap for 55 Degree straight pipe threads. Thread tolerance
JB/T 10031-1999 Gauges for pipe threads where pressure - Tight joints are made on the threads

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads
GB/T 10922-1989 Gauges for pipe threads where pressure-tight joints are not made on the threads

Professional Standard - Tobacco

YC/T 230-2007 Pipe threads with 80 degree

Swiss Association for Standardization (SNV)

VSM 12041-1967 Thread grooves for external and internal threads. Metric ISO thread and Metric ISO fine thread
VSM 13190.4-1967 External thread thread tail buckle. Metric ISO thread and Metric ISO fine thread
SN 258 405-1979 Die Angaben in dieser Norm entsprechen weitgehend den Fest-legungen der von der Internationalen Organisation für Nor-mung, ISO, herausgegebenen Internationalen Norm ISO 1829 ■ 1975. (Siehe Erl?uterungen.)
VSM 23707-1971 Metric ISO thread. ISO thread tolerance basics and notes
VSM 10336.16-1946 Helix length and available thread length. Metric ISO thread
SN 029 100-1983 This standard is a translation of the original bilingual (German/French) Swiss Standard
SN 213 163-1979 Threaded hole. Metric ISO thread M 1 to M 100X6
VSM 11884-1942 Metric ISO thread. Fine thread with 3 mm pitch

British Standards Institution (BSI)

BS 34:1910 Screw threads and pipe threads
BS 34:1908 Screw threads and pipe threads
BS 34:1906 Screw threads and pipe threads
BS 3643-1:1963 ISO metric screw threads. Thread data and standard thread series
BS ISO 68-1:1998+A1:2020 ISO general purpose screw threads. Basic profile. Metric screw threads
BS 21:1938 Pipe threads
BS 21:1957 Pipe threads
BS ISO 68-2:1998+A1:2020 ISO general purpose screw threads. Basic profile. Inch screw threads

Association Francaise de Normalisation

NF L22-208:1984 Bolt, hexagonal head, threaded to head. ISO thread.
NF L22-293:1979 Slotted cheese ehad screws, fully threaded. ISO thread.
NF ISO 2901:2016 Metric ISO Trapezoidal Threads - Basic and Nominal Profiles
NF L22-294:1979 Slotted raised cheese head screws, fully threaded. ISO thread.
NF L22-209:1984 Bolt, hexagonal head, with locking hole threaded to head. ISO thread.
NF L22-291:1979 Slotted 90 degrees countersunk head screws, fully threaded. ISO thread.
NF L22-292:1979 Slotted 60 degrees countersunk head screws, fully threaded. ISO thread.
NF L22-298:1979 Hexagon socket head cap screws, fully threaded. ISO thread.
NF E03-005:1981 Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).
NF L05-200:1952 Metric screw threads. Sim profile (rech.).
NF L22-275:1982 Pan head screws, fully threaded,B.N.A.E. Cross recess. ISO thread.
NF L22-201:1984 Bolt, hexagonal head, short thread, close tolerance. ISO thread.
NF E03-500*NF ISO 1501:2009 ISO miniature screw threads
NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
NF L22-296:1979 Slotted and drilled cheese head screws, fully threaded. ISO thread.
NF L05-200:1966 METRIC SCREW THREADS. SIM PROFILE. (RECH.).
NF L22-202:1984 Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.
NF E66-120:1975 Hand taps for pipe threads for parallel and taper threads.
NF E03-165:1984 Checking of pipe threads where pressure tight joints are made on the threards with limit gauges (according to NF E 03-004).
NF L40-105:1973 Connectors, axial sealing. Internal thread bosses, ISO metric thread profile and tolerances.
NF L22-259:1982 100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.
NF L46-313:1979 Screwed sealing plugs, radial sealing. ISO metric thread profile and tolerances.
NF L46-315:1979 Screwed sealing plugs, axial sealing. ISO metric thread profile and tolerances.
NF ISO 1501:2009 Filetages miniatures ISO

Austrian Standards

ONORM M 1515-1968 Metric ISO - thread. Thread selection
ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions
ONORM M 1500-1973 ISO metric screw threads; thread profile Filetages me'triques ISO; profil de filetage
ONORM M 1804-1987 Thread ends and lengths of holt ends for metric ISO-threads
ONORM M 1900-1980 Sealing rings for screwed pipe ions and screw plugs

Standard Association of Australia （SAA）

AS 1722.2:1992 Pipe threads of Whitworth form - Fastening pipe threads
AS 1722.2:1989 Pipe threads of Whitworth form - Fastening pipe threads
AS 1722.1:1975 Pipe threads of Whitworth form Part 1: Sealing pipe threads (metric units)
AS B53:1961 Pipe threads

Swedish Institute for Standards

SS 1964:1989 Threaded blind holes - ISO metric screw threads -Coarse pitch
SIS SMS 300-1931 Pipe thread manual thread, cylindrical pipe thread (R), SMS36
SIS SMS 1964-1976 Threaded blind holes. ISO metric screw threads. Coarse pitch
SIS SMS 87-1973 Taper pins with threaded end. ISO metric screw threads. Coarse pitch
SIS SS 1964-1989 Threaded blind holes — ISO metric screw threads — Coarse pitch
SIS SMS-302-1931 Pipe Thread Tapered Hand Thread, Tapered Pipe Thread System (BSP) SMS-295
SS 1259:1991 Fittings for piping - Internally threaded short connections with pipe threads ISO 228-1-G
SIS SMS 491-1973 Taper pins with threaded end. ISO inch screw threads. Coarse pitch
SIS SS 1716-1988 ISO inch screw threads — Selected sizes for screw threads with coarse pitch
SIS SMS 2-1972 ISO metric screw threads. Selected sizes for screw threads with coarse pitch
SIS SS 1259-1991 Fittings forpiping — Internally threaded short connections with pipe threads ISO 228-1-G
SS-EN ISO 4230:2017 Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
SIS SS 1257-1991 Fittings for piping — Intemally threaded long connections with pipe threads ISO 228- 1-G
SIS SS 1717-1988 ISO inch screw threads — Selected sizes for screw threads with fine pitch
SIS SS 2639-1987 Screwing dies - Taper pipe threads R
SS 1716:1988 ISO inch screw threads - Selected sizes for screwthreads with coarse pitch
SS 1717:1988 ISO inch screw threads - Selected sizes for screwthreads with fine pitch
SS 2638:1987 Screwing dies - Parallel pipe threads G
SS 1925:1988 ISO inch screw threads with coarse pitch - Screw thread tolerances for metal end of studs
SIS SS 3194-1988 ISO inch screw threads- Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
SIS SS 3218-1984 Threaded stainless steel pipe fittings - Barrel nipples with external taper pipe threads
SIS SS 1258-1991 Fittings for piping — Externally threaded short connections with pipe threads ISO 228- 1-G- or ISO 7- 1-R
SS-ISO 4755:1986 Fasteners - Thread undercuts for external metric ISO threads
SS 1715:1988 ISO general purpose metric screw threads - Selected sizes for screw threads with fine pitch
SS 1924:1988 ISO general purpose metric screw threads with coarse pitch - Screw thread tolerances for metal end of studs
SS 1746:1979 Screw ring gauges - Profiles and tolerances for ISO inch screw threads
SIS SMS 295-1972 Taper pipe threads
SS 1747:1979 Screw calliper gauges - Profiles and tolerances for ISO inch screw threads
SS 3224:1984 Threaded stainless steel pipe fittings - Plugs with external taper pipe thread
SS 3194:1988 ISO inch screw threads - Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
SIS SS 1747-1979 Screw calliper gauges — Profiles and tolerances for ISO inch screw threads
SS-ISO 5969:1987 Ground thread taps for pipe threads G and Rp - Tolerances on the threaded portion

Czech Standards Institute (UNMZ)

CSN ON 22 3214-1968 Tapered thread pipe thread
CSN 22 3009-1983 Taps for cylindrical pipe thread. Thread tolerances
CSN 25 4621-1960 Screw gauges. Screw pitch gauges for whitworth thread and pipe thread
CSN ON 22 3322-1963 Thread cutter cylindrical shank threaded pipe
CSN 13 8281-1986 Locking nuts with pipe threads
CSN 01 4033-1985 Cylindrícal pipe threads for gas tubes and screwed fittings

Bureau of Indian Standards

IS 12325-1988 ISO Specification for Circular Thread Dies for Metric Conduit Threads
IS/ISO 1501-2009 ISO Miniature Screw Threads

German Institute for Standardization

DIN 76-2:1984-12 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
DIN 2999-1:1983 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
DIN 86121:1984-03 Screw caps; pipe thread G1 to G6
DIN 3858:1970 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 431:2000 Pipe nuts with thread according to DIN ISO 228-1
DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 86103:2025-07 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 86103:1996-06 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 8140-2:2005-08 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
DIN 2999:1960 Whitworth pipe threads for threaded pipes and fittings - Part 1: Parallel internal and taper external threads
DIN 103-2:1977 ISO Metric Trapezoidal Screw Thread; General Plan
DIN 40431-1:1970-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
DIN 2981:1982 Theraded steel pipe fittings; Fittings with long screw thread
DIN 86103:2019 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 40431-2:1972 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 3858:2005 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
DIN 852-2:1990-02 Bore type thread milling cutters for ISO metric threads; technical delivery conditions
DIN 2278:1967-12 Dirt Grooves on Screw Thread Gauges for Screw Threads with ISO Metric Profile
DIN 86103 E:2019 Draft Document - Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 76-1:2004 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
DIN ISO 6410-2:1993-12 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
DIN 8140-2:2005 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
DIN 86103:2019-01 Draft Document - Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 86103:2019-09 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 76-1:2004-06 Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13-1
DIN 40431-2 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 40431-2:1972-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 86103 E:2019-01 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN EN 10241:2000-08 Steel threaded pipe; German version EN 10241:2000
DIN EN 10241:2000 Steel threaded pipe; German version EN 10241:2000
DIN 86103 E:2024-12 Draft Document - Sockets for screwed ends with metric fine thread and Whitworth pipe thread

Danish Standards Foundation

DANSK DS/ISO 3508:1977 External threaded outlet. ISO metric thread
DANSK DS/ISO 4755:1984 Fastening elements. Thread clearance. External ISO metric thread
DS 44:1967 Internal thread runout and undercut. ISO metric thread
DANSK DS/ISO 1501:2009 ISO miniature screw threads
DANSK DS 113.2:1978 Ringskruer. ISO metrisk gevind

Belgian Standards Institute

NBN 719 F-1967 Screw; Bolt; Nut; Thread outlet (ISO metric thread)
NBN 586-1962 ISO pipe threads for unsealed joints between thread and gauge
NBN 553 F-1966 Hexagonal screws, quality standard M ISO metric thread, threaded rod with partially threaded
NBN 554 F-1966 Hexagonal screws, quality standard G ISO metric thread, threaded rod with partially threaded
NBN E 66-101-1973 The diameter of the drill for the front screw hole. ISO metric triangle thread and pipe thread
NBN 820-1970 Tap ISO for joint pipe thread. Threaded Section Dimensions and Tolerances
NBN-EN ISO 1478:1994 Tapping screws thread (ISO 1478:1983)
NBN 902-1970 Pre-drilling drill bit diameter before tapping, metric ISO triangular thread. Pipe thread
NBN 624 F-1966 Hexagonal screws, quality standard G Thread Metric ISO Threaded rod below top

American Society of Mechanical Engineers (ASME)

USAS B2.1-1968 Pipe Threads (Except DryseaI)

National Standardisation Body (ASRO)

STAS 2298-1983 Serew cutting tools STRAIGHT COMBS FOR ISO METRIC THREAD AND GAZ THREAD WITH THREAD PACKING
STAS 1112/15-1990 Screw cutting tools. Taps for pipe threads. Thread tolerances
STAS 3508/2-1970 SCREW THREAD RUNOUT AND UNDERCUT Pipe thread
STAS 2114/5-1975 iso trapezoidal screw threads Limits of size for internal seiew thread
STAS 3508/1-1980 THREAD RUN.-OUT AND UNDERCUT ISO general purpose metric screw thread
STAS 6371-1973 ISO genera! purpose inetric scrcw thrcads BASIC PROFJI,

Korean Agency for Technology and Standards (KATS)

KS B 3275-2002(2012) CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS
KS B 5223-2021 Screw thread limit gauges for parallel pipe threads
KS B 3275-1987 CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS
KS B 3274-2002(2012) CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS
KS B 5223-2001(2016) Screw thread limit gauges for parallel pipe threads
KS B 3274-1987 CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS
KS B 5223-1985 Screw thread limit gauges for parallel pipe threads
KS B 0223-1986(2011) Screw Threads for Rigid Metal Conduits and Fittings
KS B 5223-2001(2021) Screw thread limit gauges for parallel pipe threads

Finnish Standards Institute

SFS 2197-1967 Screws, screw and thread lengths. Metric ISO-thread
SFS 2013-1966 Threaded ends and end grooves, metric ISO-thread
SFS-EN 25967:1990 Taps and thread cutting. Nomenclature of the main types and terminology (ISO 5967:1981)

Society of Automotive Engineers (SAE)

SAE AS4861B-2016 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4861A-2013 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4861 Bushing, Pipe, Internal and External Thread
SAE AS4861A-2003 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4861-1995 Bushing@ Pipe@ Internal and External Thread (FSC 4730; Should Be Used Instead of AN912 REV 9@ Which Was Cancelled on 8 February 1999)
SAE AS4854A-2013 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4855A Fitting, Elbow, 45°, Pipe, Internal and External Thread
SAE AS4861-2002 BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS5201 Fitting End, External Taper Pipe Thread, Design Standard
SAE AS4854A-2003 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
SAE J476_196106 Dryseal Pipe Threads
SAE AS4855A-2013 FITTING, ELBOW, 45°, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4854A Fitting, Elbow, 90°, Pipe, Internal and External Thread

Ente Nazionale Italiano di Unificazione

UNI 4649-1961 Thread span milling cutter. Weishi thread and gas pipe thread
UNI 2948:1971 Lifting eye nuts. Iso metric coarse and fine thread.
UNI 5710-1965 Incomplete thread part, discharge pipe, full thread useful length and hole depth. ISO internal metric thread
UNI 7650:1977 Hand taps for pipe threads for parallel and taper threads.
UNI 7456-1975 Ground thread taps for ISO metric threads. Deviation of the threaded part of the product
UNI 339:1966 Pipe threads for gas list tubes and screwed fittings where pressure-tight jonts are made on the threads

Aerospace Industries Association

AIA NAS251 Nipple - Pipe Thread & Hose Plastic
AIA NAS245 Nipple - Flared Tube & Pipe Thread Plastic

South African Bureau of Standard

SANS 1700-2-13:2003 Fasteners Part 2: Screw threads Section 13: Tapping screws thread

Associação Brasileira de Normas Técnicas

ABNT P-NB-183-1970 Thread calibrator, supports ISO metric threads
ABNT NB-97 Pt.1-1973 Iso metric thread
ABNT NB-97 Pt.3-1973 Iso metric thread

Yugoslav Association for Standardization

JUS M.B1.036-1979 Trapezoidal, inclined and other internal threads with large pitch EXIT AND GROOVES
JUS M.B1.035-1979 ISO exterml metric trapezoidal screw threads, knuckle screw threads and other screw threads ofcoarse pitches. Runouts and undercuts
JUS M.B0.511-1981 Metne screw thread with tnangular li>U-protile. bauges tor internat tnreaas. loierances ror znreaa gauges
JUS M.B0.510-1981 Metric screw thread with trianguiar ISO—profile. Gauges for extemal threads. Tolerances for thread gauges

Gosstandart of Russia

GOST R 59110-2020 Motor vehicles. Fasteners. Thread run-outs and thread undercuts for ISO metric threads
GOST 21973-1976 Threaded piping joints. Joining threads. Series

American Petroleum Institute (API)

API SPEC 5B KAZAKH-2008 Specification for Threading@ Gauging and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (FIFTEENTH EDITION)
API STD 5B-1988 Specification for Threading@ Gaging@ and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (THIRTEENTH EDITION)

U.S. Military Regulations and Norms

ARMY A-A-59326/14 B-2011 REDUCER, EXTERNAL PIPE THREAD BY FEMALE, TYPE XIII

Asociación Española de Normalización (AENOR)

AENOR UNE-EN ISO 6410-2:1996 TECHNICAL DRAWINGS. SCRES THREADS AND THREADED PARTS. PART 2: SCREW THREAD INSERTS. (ISO 6410-2:1993).

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 4755:2017 Fasteners -- Thread undercuts for external metric ISO threads

International Organization for Standardization (ISO)

ISO 1501:2009 ISO miniature screw threads

Standards Norway

NS 5321:1977 Hand taps for pipe threads for taper threads
NS 1074-2:1971 Metric screw threads — ISO profile — Limits of sizes for commercial bolts and nut threads

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 1501:2013 ISO miniature screw threads

Lithuanian Standards Office

LST EN ISO 1478:2001 Tapping screws thread (ISO 1478:1999)

Spanish Association for Standardization (UNE)

AENOR UNE 17711:1978 ISO MINIATURE THREADS