Peak area and

Peak area and, Total:121 items.

The international standard classification for "Peak area and" includes: Fasteners in general , Auxiliary materials and additives for plastics , Radiographic equipment , Telecontrol. Telemetering , General standards related to shipbuilding and marine structures , Physicochemical methods of analysis .

The Chinese standard classification for "Peak area and" includes: Office supplies and office implements , Fastener , Carbon black , Medical radiographic equipment , Photogrammetry and Remote Sensing , Basic standards and general methods for synthetic resin and plastic .

Professional Standard - Education

JY 0307-1991 Demonstsatos for showing the edge Lines and the area of the cuboid

Taiwan Provincial Standard of the People's Republic of China

CNS 12355-1988 Contrast of MCM Gage to Diameter and Section Area
CNS 12354-1988 Contrast of Wire Gauge to Diameter and Section Area

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16823.1-1997 Stress area and bearing area for theraded fasteners
GB/T 41537-2022 Validation of snow cover area remote sensing products
GB/T 20012-2005 Medical electrical equipment. Dose area product meters
GB/T 10722-2003 Carbon black - Determination of total and external surface area by nitrogen adsorption
GB/T 51025-2016 Technical Specification for Seamless Construction of Super Large Area Concrete
GB/T 10722-2014 Carbon black—Determination of total and external surface area—Nitrogen adsorption test method

Professional Standard-Ships

CB/T 4125-2011 Assessment and calculating method for damaged coatings area for marine ballast tanks
CB/Z 32-1977 wind area calculation

National Metrological Technical Specifications of the People's Republic of China

JJF 1479-2014 Calibration Specification for Dose Area Product Meters

Group Standards of the People's Republic of China

T/WFZYC 02-2024 Cultivation and primary processing of Wufeng Gastrodia elata with geographical indication
T/CEC 370-2020 Technical specifications for frequency regulation and peak regulation of electrochemical energy storage power stations

Henan Provincial Standard of the People's Republic of China

DB41/T 2164-2021 Guidelines for the verification and adjustment of office space for party and government agencies

Hunan Provincial Standard of the People's Republic of China

DB43/T 2565-2023 Service and management norms for self-driving tour peak period in tourist destinations

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging

Professional Standard - Aerospace

QJ 1273.9-1991 Classification and code of capital construction system data element capital construction area

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1700-2018 Conversion method of vehicle volume and volume of eucalyptus logs

American Society for Testing and Materials (ASTM)

ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM RR-D02-1591 2005 D7214-Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM RR-D02-1623 2007 D7214-Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

German Institute for Standardization

DIN 277-2:1981 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN 277-2:1987 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN 277-2:2005 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN 277:2021-08 Areas and volumes in building construction
DIN 277:2021 Areas and volumes in building construction
DIN 277 E:2020-12 Areas and volumes in building construction
DIN EN IEC 60580:2021-07 Medical electrical equipment - Dose area product meters (IEC 60580:2019); German version EN IEC 60580:2020
DIN EN ISO 11646:2014-07 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
DIN EN 60580:2001 Medical electrical equipment - Dose area product meters (IEC 60580:2000); German version EN 60580:2000
DIN EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998

Korean Agency for Technology and Standards (KATS)

KS B ISO 7181-2013 Hydraulic fluid power－Cylinders－Bore and rod area ratios
KS B 0249-1988 Stress area and bearing area for threaded fasteners
KS B 0249-2003 Stress area and bearing area for threaded fasteners
KS B 0249-2003(2018) Effective cross-sectional area of the screw and load area of the seating surface
KS B 5323-2009 Variable area flowmeters
KS M ISO 11646-2017(2022) Leather－Measurement of area
KS B 5323-2019 Variable area flowmeters
KS M ISO 11646-2022 Leather－Measurement of area
KS B 5323-2009(2019) Variable area flowmeters
KS B 5323-1995 Variable area flowmeters

Association Francaise de Normalisation

NF C32-018:1993 Conductors for wires and cables with small cross-sectional areas
NF C74-103*NF EN IEC 60580:2020 Medical electrical equipment - Dose area product meters

RU-GOST R

GOST R IEC 580-1995 Area exposure product meter
GOST R ISO 11646-2017 Leather. Measurement of area

BR-ABNT

ABNT MB-490-1972 Volume resistance and surface resistance detection of insulating materials

European Committee for Electrotechnical Standardization（CENELEC）

HD 379-1978 Area Exposure Product Meter
EN IEC 60580:2020 Medical electrical equipment - Dose area product meters

International Electrotechnical Commission (IEC)

IEC 60580:1977 Area exposure product meter
IEC 60580:2019 RLV Medical electrical equipment - Dose area product meters

BE-NBN

NBN-HD 379-1994 Area exposure product meter

SCC

AWWA ACE99414 Risk Assessment and Prediction of Peak Water Demands
DANSK DS 13000:2007 Opmåling af bygninger, areal- og volumenbegreber
NS 3940:1986 Areas and volumes of buildings
NS 3940:1979 Areas and volumes of buildings
NS 3940:2007 Areas and volumes of buildings
DIN 277 E:2020 Draft Document - Areas and volumes in building construction
NS 3940:2012 Calculation of areas and volumes of buildings
MIL MIL-DTL-3943/410-2019 MEDAL, PINNACLE AWARD, ASSISTANT SECRETARY FOR PREPAREDNESS AND RESPONSE, DEPARTMENT OF HEALTH AND HUMAN SERVICE
DANSK DS/EN IEC 60580:2020 Medical electrical equipment – Dose area product meters
CEI EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
DANSK DS/EN 60580:2001 Medical electrical equipment – Dose area product meters
NS 848:1954 Area and volumes of buildings — Rules for measurement
DANSK DS/EN ISO 11646:2014 Leather - Measurement of area
CEI EN 60580:2001 Medical electrical equipment - Dose area product meters

KR-KS

KS B 0249-2003(2023) Effective cross-sectional area of the screw and load area of the seating surface
KS K ISO 105-X16-2016 Textiles－Tests for colour fastness－Part X16：Colour fastness to rubbing－Small areas
KS C IEC 60580-2023 Medical electrical equipment — Dose area product meters

Japanese Industrial Standards Committee (JISC)

JIS Z 4324:2017 Installed area monitors for X and gamma rays

European Committee for Standardization (CEN)

HD 379 S1-1979 Area exposure product meter

American Welding Society (AWS)

WRC 335:1988 A Review of Area Replacement Rules for Pipe Connections in Pressure Vessels and Piping

American Gear Manufacturers Association

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair

NO-SN

NS 3940-2007 Areas and volumes of buildings
NS 3940-2012 Calculation of areas and volumes of buildings

GSO

BH GSO ISO 19950:2022 Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
GSO ISO 19950:2021 Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
BH GSO IEC 60580:2016 Medical electrical equipment - Dose area product meters
OS GSO IEC 60580:2014 Medical electrical equipment - Dose area product meters
BH GSO ISO 11646:2016 Leather -- Measurement of area

Building Officials and Code Administrators International(U.S.)

BOCA IOTFDC-1998 CHAPTER 7-1998 Wall Covering

International Organization for Standardization (ISO)

ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
ISO 18852:2012 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
ISO 18852:2005 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
ISO 11646:2014 Leather - Measurement of area
ISO 11646:2014 | IULTCS/IUP 32 Leather — Measurement of area
ISO 18852:2015 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
ISO 11646:1993 | IULTCS/IUP 32 Leather — Measurement of area

British Standards Institution (BSI)

BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
BS EN IEC 60580:2020 Medical electrical equipment. Dose area product meters
BS ISO 18852:2012 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
BS ISO 18852:2015 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
BS EN ISO 11646:1998 Leather - Measurement of area
BS EN ISO 11646:2014 Leather. Measurement of area

NL-NEN

NEN 2320-1988 Areas and volumes of residential buildings and dwellings

ESDU - Engineering Sciences Data Unit

ESDU 02007 B-2009 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 02007 A-2003 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 02007-2002 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 03005-2003 AMOPS: Computer program for the calculation of area and moments of area of planar shapes.

HU-MSZT

MSZ 21196-1958 Paint and glaze area determination

Standard Association of Australia （SAA）

AS 1377.2:1973 Conversion tables - Area

AT-ON

ONORM B 1800-2002 Determination of areas and volumes of buildings

Society of Automotive Engineers (SAE)

SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel

ECSS - European Cooperation for Space Standardization

Q-ST-70-07C-2010 Verification and approval of automatic machine wave soldering (Second Issue)

Spanish Association for Standardization (UNE)

UNE-EN IEC 60580:2020 Medical electrical equipment - Dose area product meters (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE 59050:1993 LEATHER. MEASUREMENT OF AREA.
UNE-EN 60580:2001 Medical electrical equipment - Dose area product meters.