Peak area and content

Peak area and content, Total:231 items.

The international standard classification for "Peak area and content" includes: Other methods of testing of metals , Chemical analysis of metals , Physicochemical methods of analysis , Radiographic equipment , Reinforced plastics , Textiles in general , Textile fabrics , Astronomy. Geodesy. Geography .

The Chinese standard classification for "Peak area and content" includes: Metallographic testing method , Basic standards and general methods for synthetic resin and plastic , Medical radiographic equipment , Metal processing property test method , Fibre reinforced composites , Basic standards and general methods , Length Measurement , Office supplies and office implements , Geotectonic Mapping and Marine Mapping .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3365-2008 Carbon fiber reinforced plastics - Determination of void content and fiber volume content
GB/T 13305-1991 Austenitic stainless steels－Determination of area content of the α-phase－Micrographic method using STANDARD diagrams
GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging
GB/T 20012-2005 Medical electrical equipment. Dose area product meters
GB/T 13305-2008 Micrographic method for determining area content of the α-phases in stainless steels
GB/T 6401-1986 Micrographic method for determining area fraction of the alpha-phases using charts in ferritic-austenitic stainless steels

Professional Standard - Textile

FZ/T 01033-2012 Test Method of Mass Per Unit Area and Pile Percent of Pile Fabric
FZ/T 01033-1993 Determination of Mass Per Unit Area and Pile Fabrics (Cover) Containing Cashmere

Group Standards of the People's Republic of China

T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/ZS 0524-2023 Technical specification for housing area measurement
T/TEA 13-2024 Terrace Tea Plantation Terminology and Definition
T/CSAE 238-2021 Vehicle frontal area measurement method

National Metrological Technical Specifications of the People's Republic of China

JJF 1479-2014 Calibration Specification for Dose Area Product Meters

National Metrological Verification Regulations of the People's Republic of China

JJG 660-2006 Verification Regulation of Pattern Area Measuring Instruments

Professional Standard - Light Industry

QB/T 5089-2017 Leather. Measurement of area

Professional Standard - Education

JY 0307-1991 Demonstsatos for showing the edge Lines and the area of the cuboid

Beijing Provincial Standard of the People's Republic of China

DB11/T 107-1998 Method for measuring the area of commercial housing

Professional Standard - Traffic

JT/T 7-1994 Measurement and Calculation of the Capacity for Ships Liquid Cargo Tank

Professional Standard - Ocean

HY070-2003 Specifications for the measurement of sea area use area
HY 070-2003 Specifications for surveying sea using area
HY/T 070-2022 Specifications for surveying sea using area

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3155-2019 Conductor cross-sectional area measurement method

Professional Standard - Petroleum

SY/T 5408-1991 Determination of the content of sticky particles in sedimentary rocks
SY/T 5408-2018 Determination of clay particles content in sedimentary rocks

Professional Standard - Petrochemical Industry

SH/T 0638-1996 Determination method for oil content of microcrystalline wax (volumetric method)

Chongqing Provincial Standard of the People's Republic of China

DB50/ 3-1997 How to measure building area

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 19950:2022 Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
BH GSO ISO 11646:2016 Leather -- Measurement of area
BH GSO IEC 60580:2016 Medical electrical equipment - Dose area product meters
BH GSO ISO 1070:2022 Hydrometry — Slope-area method
BH GSO ISO 25178-600:2022 Geometrical product specifications (GPS) — Surface texture: Areal — Part 600: Metrological characteristics for areal topography measuring methods

British Standards Institution (BSI)

BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
BS EN ISO 11646:1998 Leather - Measurement of area
BS EN ISO 11646:2014 Leather. Measurement of area
BS EN IEC 60580:2020 Medical electrical equipment. Dose area product meters
BS EN ISO 25178-600:2019 Geometrical product specifications (GPS). Surface texture: Areal - Metrological characteristics for areal topography measuring methods
BS ISO 1070:2018 Hydrometry. Slope-area method
18/30356778 DC BS EN 60580. Medical electrical equipment. Dose area product meters
BS EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
12/30256096 DC BS EN ISO 11646. Leather. Measurement of area

International Organization for Standardization (ISO)

ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
ISO 11646:1993 | IULTCS/IUP 32 Leather — Measurement of area
ISO 11646:2014 | IULTCS/IUP 32 Leather — Measurement of area
ISO 11646:2014 Leather - Measurement of area
ISO 11646:1993 Leather; measurement of area
ISO 1070:1973 Liquid flow measurement in open channels — Slope-area method
ISO 748:1979 Liquid flow measurement in open channels; Velocity-area methods
ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 12195:1995 Threshed tobacco - Determination of residual stem content
ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

GCC Standardization Organization

GSO ISO 19950:2021 Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
GSO ISO 1070:2021 Hydrometry — Slope-area method
GSO ISO 10548:2014 Carbon fibre -- Determination of size content
GSO OIML R136-1:2008 Instruments for measuring the areas of leathers
BH GSO OIML R136-1:2024 Instruments for measuring the areas of leathers
GSO ISO 25178-600:2021 Geometrical product specifications (GPS) — Surface texture: Areal — Part 600: Metrological characteristics for areal topography measuring methods
GSO ISO 11461:2013 Soil quality -- Determination of soil water content as a volume fraction using coring sleeves -- Gravimetric method

Association of German Mechanical Engineers

VDI VDE 3513 Blatt 3-1989 Variable-Area Flowmeters - Selection and Installation
VDI/VDE 3513 Blatt 1-2014 Variable-area flowmeters - Calculation methods
VDI/VDE 3513 Blatt 1-2009 Variable area flowmeters - Calculation methods
VDI/VDE 3513 Blatt 1-2008 Schwebkoerperdurchflussmesser - Berechnungsverfahren
VDI VDE 3513 Blatt 1-2014 Variable-area flowmeters Calculation methods

German Institute for Standardization

DIN 277 Zusammenfassung:2005-08 Floor areas and volumes of buildings in civil engineering works
DIN 277 Teil-1 Bilderlaeuterungen:1975 Square area and spatial volume of high-rise buildings
DIN EN ISO 11646:2014-07 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
DIN EN IEC 60580:2021-07 Medical electrical equipment - Dose area product meters (IEC 60580:2019); German version EN IEC 60580:2020
DIN EN ISO 11646:1998 Leather - Measurement of area (ISO 11646:1993); German version EN ISO 11646:1998
DIN EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
DIN EN 60580:2001 Medical electrical equipment - Dose area product meters (IEC 60580:2000); German version EN 60580:2000
DIN EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998
DIN EN ISO 11646:1998-12 Leather - Measurement of area (ISO 11646:1993)
DIN EN ISO 11646 E:2012-01 Measurement of Leather Area (Draft)
DIN EN ISO 25178-600:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019); German version EN ISO 25178-600:2019
DIN EN 2331:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993
DIN SPEC 1107:2010-05 Hydrometry - Measurement of snow water equivalent using snow mass registration devices; German version CEN/TR 15996:2010

European Committee for Standardization (CEN)

HD 379 S1-1979 Area exposure product meter
CEN EN ISO 11646:1998 Leather - Measurement of Area ISO 11646:1993
EN ISO 11646:1998 Leather - Measurement of Area ISO 11646:1993
EN ISO 11646:2014 Leather - Measurement of Area

Magyar Szabványügyi Testület

MSZ KGST 1243-1978 Bauxite and volumetric method definition of aluminum oxide content
MSZ 10861/4-1981 Deposition equipment. Silver content
MSZ 10861/1-1980 Deposition machinery. Nickel content
MNOSZ 448-30.lap-1955 Iron and manganese ion content in sediments

American Society for Testing and Materials (ASTM)

ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM E1836-E 1836M- 09(2016) Standard Practice for Building Floor Area Measurements for Facility Management
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM RR-D02-1591 2005 D7214-Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM RR-D02-1623 2007 D7214-Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

Korean Agency for Technology and Standards (KATS)

KS B 5323-2009 Variable area flowmeters
KS M ISO 11646-2017(2022) Leather－Measurement of area
KS B 5323-2019 Variable area flowmeters
KS B 5323-2024 Variable area flowmeters
KS M ISO 11646-2022 Leather－Measurement of area
KS B 5323-1995 Variable area flowmeters
KS B 5323-2009(2019) Variable area flowmeters
KS B OIMLR 139-1-2006 Instruments for measuring the areas of leathers
KS M ISO 11646:2007 Leather－Measurement of area
KS M ISO 11646:2017 Leather－Measurement of area
KS C IEC 60580-2023 Medical electrical equipment — Dose area product meters
KS A 0611-1997(2022) Method of measurement by variable area flowmeters
KS A 0611-1982 Method of measurement by variable area flowmeters
KS M ISO 2286-2-2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
KS B OIMLR 139-1-2006(2021) Instruments for measuring the areas of leathers
KS B OIMLR 139-1-2006(2016) Instruments for measuring the areas of leathers
KS B ISO 7181-2013 Hydraulic fluid power－Cylinders－Bore and rod area ratios
KS B ISO 1070-2023 Hydrometry — Slope-area method
KS B OIMLR 139-1-2021 Instruments for measuring the areas of leathers
KS B ISO 748:2003 Measurement of liquid flow in open channels-Velocity-area methods
KS B ISO 748:2015 Measurement of liquid flow in open channels－Velocity-area methods
KS A 0611-1997 Method of measurement by variable area flowmeters
KS F 2010-2013(2018) Method of measurements for flow discharge in open channels — Velocity-area methods
KS B ISO 748-2015 Measurement of liquid flow in open channels－Velocity-area methods
KS M ISO 2286-2:2012 Rubber- or plastics-coated fabrics-Determination of roll characteristics-Part 2:Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS M ISO 2286-2:2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS M ISO 2286-2-2017(2022) Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs

Standards Norway

NS 848:1954 Area and volumes of buildings — Rules for measurement
NS-EN ISO 11646:1998 Leather — Measurement of area (ISO 11646:1993)
NS-EN ISO 11646:2014 Leather — Measurement of area (ISO 11646:2014)
NS-EN ISO 25178-600:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)

Ente Nazionale Italiano di Unificazione

UNI EN 2559:1998 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
UNI EN ISO 11646:2000 Leather - Measurement of area
UNI EN ISO 11646:2014 Leather - Measurement of area
UNI ISO 9836:2012 Performance standards in building - Definition and calculation of area and space indicators
UNI 8635-15:1986 Building. Tests of products for discontinuous roofing. Determination of number for area unit and areic mass.
UNI 9401:1989 Nets for agricultural uses. Determination of the mass per unit area.
UNI 8635-15:2019 Building - Tests of products for discontinuous roofing - Part 15: Determination of number for area unit and areic mass

Association Francaise de Normalisation

NF V03-730-4*NF EN ISO 21415-4:2007 Wheat and wheat flour - Gluten content - Part 4 : determination of dry gluten content from wet gluten by a rapid drying method.
NF G52-021*NF EN ISO 11646:2014 Leather - Measurement of area
NF G52-021:2000 Leather - Measurement of area.
NF C74-103*NF EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
NF EN 16074:2019 Paints and varnishes - Determination of the non-volatile matter content and the specific surface yield of pre-painting coatings
NF C32-018:1993 Conductors for wires and cables with small cross-sectional areas
NF P84-514:1994 Geomembranes. Determination of mass per unit area.
NF V03-730-1*NF EN ISO 21415-1:2007 Wheat and wheat flour - Gluten content - Part 1 : determination of wet gluten by manual method

Spanish Association for Standardization (UNE)

UNE 59050:1993 LEATHER. MEASUREMENT OF AREA.
UNE-EN IEC 60580:2020 Medical electrical equipment - Dose area product meters (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 60580:2001 Medical electrical equipment - Dose area product meters.
UNE 59531:2014 Footwear. Area measurements in soles
UNE-EN ISO 11646:1999 LEATHER. MEASUREMENT OF AREA. (ISO 11646:1993)
UNE-EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014)
UNE 35053-1:1985 FERROVANADIUM. DETERMINATION OF VANADIUM CONTENT. VOLUMETRIC METHOD
UNE-EN ISO 25178-600:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE 7331:1975 DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD.
UNE 35-053 Pt.1-1985 Iron vitriol. Determination of alum content. Volume determination

Danish Standards Foundation

DANSK DS/EN ISO 11646:2014 Leather - Measurement of area
DS/EN ISO 11646:1999 Leather - Measurement of area
DANSK DS/EN IEC 60580:2020 Medical electrical equipment – Dose area product meters
DANSK DS/EN 60580:2001 Medical electrical equipment – Dose area product meters
DS/EN 60580:2001 Medical electrical equipment - Dose area product meters
DS 13000:2007 Measurement of buildings, concepts of area and volume
DANSK DS/ISO 25178-600:2019 Geometrical product specifications (GPS) – Surface texture: Areal – Part 600: Metrological characteristics for areal-topography measuring methods
DS 13000:2021 Measurement of buildings, concepts of area and volume – CORRECTIONS 1

Gosstandart of Russia

GOST R ISO 11646-2017 Leather. Measurement of area

Society of Automotive Engineers (SAE)

SAE AMS2401E-2000 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401J-2013 Plating, Cadmium, Low Hydrogen Content Deposit
SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE AMS2401H Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401B Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401E Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401D Cadmium Plating, Low Hydrogen Content Deposit
SAE AMS2401D-1991 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401B-1968 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401G Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401C Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401A-1965 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401J Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401D-1986 Cadmium Plating Low Hydrogen Content Deposit
SAE AMS2401 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401K Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401-1963 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401G-2002 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401F Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401C-1978 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401A Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401K-2019 Plating, Cadmium Low Hydrogen Content Deposit
SAE J911_198606 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE AMS2401F-2001 Plating@ Cadmium Low Hydrogen Content Deposit
SAE AMS2401H-2007 Plating, Cadmium Low Hydrogen Content Deposit
SAE J911_199803 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE J911_198110 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE J911_196501 Surface Texture Measurement of Cold Rolled Sheet Steel
SAE ARP1067A-1975 Turbine Nozzle Area Measurement By Water Flow Method

Comitato Elettrotecnico Italiano

CEI EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
CEI EN 60580:2001 Medical electrical equipment - Dose area product meters

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60580:2014 Medical electrical equipment - Dose area product meters
OS GSO OIML R136-1:2008 Instruments for measuring the areas of leathers

Standard Association of Australia （SAA）

AS 3778.3.3:1990 Measurement of water flow in open channels, Part 3.3: Velocity-area methods - Measurement by slope-area method
AS 4878.3:2001 Methods of test for coated fabrics - Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
AS 3778.3.3:2022 Measurement of water flow in open channels, Part 3.3: Velocity-area methods — Measurement by slope-area method (ISO 1070:2018, IDT)

Indonesia Standards

SNI 1973-2008 Testing methods for volume weight, mixed production volume and concrete air content

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4957:2002 Medical electrical equipment - Dose area product meters

Bureau of Indian Standards

IS/IEC 60580-2019 Medical electrical equipment Dose area product meters
IS 14487-1997 Measurement of Area of Leather - Guideline
IS 2912-2022 Liquid Flow Measurement in Open Channels-Slope-Area Method

Swedish Institute for Standards

SS 21054:2020 Area and volume of buildings - Terminology and measurement
SS-EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
SS 21052:1989 Area and volume of buildings - Terminology and measurement
SS-EN 60580:2000 Medical electrical equipment - Dose area product meters
SIS SS 02 10 52-1989 Area and volume of buildings -Terminology and measurement
SIS SS 02 10 51-1987 Area and volume of buildings - Terminology and measurement
SS-EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014)

Chile Instituto Nacional de Normalización

INDITECNOR 2.4-11ch-1948 Units of length, area, capacity, and volume

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 60580:2020 Medical electrical equipment - Dose area product meters

International Electrotechnical Commission (IEC)

IEC 60580:2019 RLV Medical electrical equipment - Dose area product meters

Belgian Standards Institute

NBN T 04-248-1983 Tritolyl phosphate for industrial use - Determination of apparet free phenols content-Volumetric method
NBN B 06-002-1983 Building surface area and volume, definitions and measurement modes
NBN P 32-007-1977 Zinc alloys - Determination of aluminium content Volumetric method
NBN-EN 430-1994 Resilient floor coverings - Determination of mass per unit area

Czech Standards Institute (UNMZ)

CSN ISO 1088:1994 Liquid flow measurement in open channels. Velocity-area methods. Collection and processing of data for determination of errors in measurement

Lithuanian Standards Office

LST EN 60580-2002 Medical electrical equipment. Dose area product meters (IEC 60580:2000)
LST EN ISO 11646:2001 Leather - Measurement of area (ISO 11646:1993)

Yugoslav Association for Standardization

JUS H.B8.288-1983 Fertilizers. Determination of content total-nitrogen. Volumetric method
JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content
JUS H.G8.067-1983 Reagents. Boric acid. Determination of boric acid content. Volumetric method

Portuguese Institute of Quality

NP 1786-1985 Animal food. Determination of calcium content (volumetric method)
NP 1624-1979 Industrial urea. Determination of iron content (volumetric method)
NP 1622-1979 Industrial urea. Determination of alkali content (volumetric method)

American National Standards Institute （ANSI)

ANSI/TIA/EIA 455-132-A-2001 Measurement of Effective Area of Single-Mode Optical Fiber

South African Bureau of Standard

SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume
SANS 5845:2006 Bulk densities and voids content of aggregates

International Truck and Engine Corporation (ITEC)

INTERN CEMS GT-1B-2009 Nonvolatile Content Of Paint By Volume

Canadian General Standards Board （CGSB)

CGSB 157.6-M91-CAN/CGSB-1991 Measurement of Flow Rate of Liquids in Open Channels - Methods for Exploring the Velocity Field - Collection and Processing of Data for the Determination of Measurement Errors

Türk Standardları Enstitüsü

TS 1139-1972 THE DETERMINATION OF THE WEIGHT PER UNIT OF THE SLIVERS

Finnish Standards Institute

SFS 4283-1979 Building area measurement. Small range basic measurement

Canadian Standards Association (CSA)

CAN/CSA-Z317.11-2002(R2013) Area Measurement for Health Care Facilities