Peak area and content

Peak area and content, Total:384 items.

The international standard classification for "Peak area and content" includes: Textiles in general , Textile fabrics , Other methods of testing of metals , Chemical analysis of metals , Physicochemical methods of analysis , Reinforced plastics , Radiographic equipment , Fasteners in general , Astronomy. Geodesy. Geography , Rubber and plastics products in general .

The Chinese standard classification for "Peak area and content" includes: Basic standards and general methods , Metallographic testing method , Basic standards and general methods for synthetic resin and plastic , Fibre reinforced composites , Medical radiographic equipment , Metal physical property test method , Fastener , Metal processing property test method , Length Measurement , Geotectonic Mapping and Marine Mapping , Rubber tube, rubber belt and tape .

Professional Standard - Textile

FZ/T 01033-2012 Test Method of Mass Per Unit Area and Pile Percent of Pile Fabric
FZ/T 01033-1993 Determination of Mass Per Unit Area and Pile Fabrics (Cover) Containing Cashmere

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2523-2008 Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip)
GB/T 20012-2005 Medical electrical equipment. Dose area product meters
GB/T 13305-2008 Micrographic method for determining area content of the α-phases in stainless steels
GB/T 2523-2022 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip
GB/T 2523-2022(英文版) Measurement methods for surface roughness, peak number and waviness of cold rolled metal sheets and strips
GB/T 16823.1-1997 Stress area and bearing area for theraded fasteners
GB/T 13305-1991 Austenitic stainless steels－Determination of area content of the α-phase－Micrographic method using STANDARD diagrams
GB/T 2523-2022e Measuring method of surface roughness,peak count and waviness for cold-rolled metal sheet and strip
GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging
GB/T 6401-1986 Micrographic method for determining area fraction of the alpha-phases using charts in ferritic-austenitic stainless steels
GB/T 3365-2008 Carbon fiber reinforced plastics - Determination of void content and fiber volume content

National Metrological Technical Specifications of the People's Republic of China

JJF 1479-2014 Calibration Specification for Dose Area Product Meters

National Metrological Verification Regulations of the People's Republic of China

JJG 413-1999 Verification Regulation of Leather Area Measuring Machine
JJG 660-2006 Verification Regulation of Pattern Area Measuring Instruments
JJG 660-1990 Verification Regulation of Pattern Area Measuring Instruments
JJG 413-2009 Verification Regulation of Leather Area Measuring Machine

Professional Standard - Light Industry

QB/T 5089-2017 Leather. Measurement of area

Group Standards of the People's Republic of China

T/CSAE 238-2021 Vehicle frontal area measurement method
T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/SKZB 004-2022 specification for management and control of net content of yellow rice wine filling volume
T/ZS 0524-2023 Technical specification for housing area measurement

Professional Standard - Commodity Inspection

SN/T 3804-2014 Determination of triethylene glycol|| diglycol and water content in triethylene glycol for import and export

Beijing Provincial Standard of the People's Republic of China

DB11/T 107-1998 Method for measuring the area of commercial housing

Professional Standard - Ocean

HY 070-2003 Specifications for surveying sea using area
HY/T 070-2022 Specifications for surveying sea using area
HY070-2003 Specifications for the measurement of sea area use area

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3155-2019 Conductor cross-sectional area measurement method

Professional Standard - Petrochemical Industry

SH/T 0638-1996 Determination method for oil content of microcrystalline wax (volumetric method)

Professional Standard - Petroleum

SY/T 5408-2018 Determination of clay particles content in sedimentary rocks
SY/T 5408-1991 Determination of the content of sticky particles in sedimentary rocks

Chongqing Provincial Standard of the People's Republic of China

DB50/ 3-1997 How to measure building area

Professional Standard - Chemical Industry

HG/T 3050.2-2020 Rubber-or plastics-coated fabrics-Determination of roll characteristics- Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
HG/T 3050.2-2001 Rubber -- or plastics -- caoted fabrics -- Determination of roll characteristics -- Part 2: Method for determination of total mass per unit area mass per unit area of coating and mass per unit area of substrate

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 19950:2022 Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
BH GSO ISO 11646:2016 Leather -- Measurement of area
BH GSO IEC 60580:2016 Medical electrical equipment - Dose area product meters
BH GSO ISO 1070:2022 Hydrometry — Slope-area method
BH GSO ISO 25178-600:2022 Geometrical product specifications (GPS) — Surface texture: Areal — Part 600: Metrological characteristics for areal topography measuring methods

British Standards Institution (BSI)

BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
BS EN ISO 11646:1998 Leather - Measurement of area
BS EN ISO 11646:2014 Leather. Measurement of area
BS EN IEC 60580:2020 Medical electrical equipment. Dose area product meters
BS EN ISO 25178-600:2019 Geometrical product specifications (GPS). Surface texture: Areal - Metrological characteristics for areal topography measuring methods
BS EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS EN ISO 10352:2020 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
BS ISO 1070:2018 Hydrometry. Slope-area method
BS EN ISO 25178-700:2023 Geometrical product specifications (GPS). Surface texture: Areal - Calibration, adjustment and verification of areal topography measuring instruments
18/30356778 DC BS EN 60580. Medical electrical equipment. Dose area product meters
BS ISO 11605:1995 Paper and board. Calibration of variable-area flowmeters
BS EN 2331:1993 Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area
BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
19/30336188 DC BS EN ISO 10352. Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
BS EN 2331:1993(1999) Textile glass fibre preimpregnates — Test method for the determination ofthe resin and fibre content and mass offibre per unit area
12/30256096 DC BS EN ISO 11646. Leather. Measurement of area

International Organization for Standardization (ISO)

ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
ISO 11646:2014 | IULTCS/IUP 32 Leather — Measurement of area
ISO 11646:2014 Leather - Measurement of area
ISO 11646:1993 | IULTCS/IUP 32 Leather — Measurement of area
ISO 11646:1993 Leather; measurement of area
ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 748:1979 Liquid flow measurement in open channels; Velocity-area methods
ISO/DIS 25178-700:2020 Geometrical product specifications (GPS) — Surface texture: Areal — Part 700: Calibration, adjustment and verification of areal topography measuring instruments
ISO 1070:1973 Liquid flow measurement in open channels — Slope-area method
ISO 12195:1995 Threshed tobacco - Determination of residual stem content
ISO 748:1973 Title missing - Legacy paper document
ISO 748:1997 Measurement of liquid flow in open channels - Velocity-area methods
ISO 3734:1976 Crude petroleum and fuel oils; Determination of water and sediment; Centrifuge method
ISO 1070:1992 Liquid flow measurement in open channels; slope-area method

GCC Standardization Organization

GSO ISO 19950:2021 Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
GSO ISO 1070:2021 Hydrometry — Slope-area method
GSO ISO 10548:2014 Carbon fibre -- Determination of size content
GSO OIML R136-1:2008 Instruments for measuring the areas of leathers
GSO ISO 2286-2:2015 Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BH GSO OIML R136-1:2024 Instruments for measuring the areas of leathers
GSO ISO 25178-600:2021 Geometrical product specifications (GPS) — Surface texture: Areal — Part 600: Metrological characteristics for areal topography measuring methods
GSO ISO 11461:2013 Soil quality -- Determination of soil water content as a volume fraction using coring sleeves -- Gravimetric method
GSO ISO 12169:2013 Nickel oxide - Determination of nickel content - Electrolytic deposition method

Standards Norway

NS 848:1954 Area and volumes of buildings — Rules for measurement
NS 3940:1979 Areas and volumes of buildings
NS 3940:1986 Areas and volumes of buildings
NS 3940:2007 Areas and volumes of buildings
NS 3940-2007 Areas and volumes of buildings
NS-EN ISO 11646:1998 Leather — Measurement of area (ISO 11646:1993)
NS-EN ISO 11646:2014 Leather — Measurement of area (ISO 11646:2014)
NS-EN 2559:1997 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
NS-EN ISO 10352:2020 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
NS-EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998)
NS-EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
NS 3940-2012 Calculation of areas and volumes of buildings
NS 3940:2012 Calculation of areas and volumes of buildings
NS-EN ISO 25178-600:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)

Swedish Institute for Standards

SS 21054:2020 Area and volume of buildings - Terminology and measurement
SS 21052:1989 Area and volume of buildings - Terminology and measurement
SIS SS 02 10 52-1989 Area and volume of buildings -Terminology and measurement
SIS SS 02 10 51-1987 Area and volume of buildings - Terminology and measurement
SS-EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
SS-EN 60580:2000 Medical electrical equipment - Dose area product meters
SS-EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014)
SS-EN 2559:1997 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
SS-EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
SS-EN 2559:2022 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
SIS 23 27 12 E-1970 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.

Society of Automotive Engineers (SAE)

SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE J911_198606 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE J911_199803 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE J911_198110 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE AMS2401E-2000 Plating, Cadmium, Low Hydrogen Content Deposit
SAE J911_196501 Surface Texture Measurement of Cold Rolled Sheet Steel
SAE AMS2401J-2013 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401-1963 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401H Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401B Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401E Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401D Cadmium Plating, Low Hydrogen Content Deposit
SAE AMS2401D-1991 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401B-1968 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401G Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401C Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401A-1965 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401J Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401D-1986 Cadmium Plating Low Hydrogen Content Deposit
SAE AMS2401 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401K Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401G-2002 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401F Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401C-1978 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401A Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401K-2019 Plating, Cadmium Low Hydrogen Content Deposit
SAE AMS2401F-2001 Plating@ Cadmium Low Hydrogen Content Deposit
SAE AMS2401H-2007 Plating, Cadmium Low Hydrogen Content Deposit
SAE ARP1067A-1975 Turbine Nozzle Area Measurement By Water Flow Method
SAE ARP1067-1969 TURBINE NOZZLE AREA MEASUREMENT BY WATER FLOW METHOD
SAE ARP1195-1971 Turbine Nozzle Area Measurement By Airflow Method
SAE ARP1067A-1969 TURBINE NOZZLE AREA MEASUREMENT/WATER FLOW METHOD

European Committee for Standardization (CEN)

HD 379 S1-1979 Area exposure product meter
CEN EN ISO 11646:1998 Leather - Measurement of Area ISO 11646:1993
EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
EN ISO 11646:1998 Leather - Measurement of Area ISO 11646:1993
EN ISO 11646:2014 Leather - Measurement of Area

American Society for Testing and Materials (ASTM)

ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM E1836-E 1836M- 09(2016) Standard Practice for Building Floor Area Measurements for Facility Management
ASTM D646-25 Standard Test Method for Mass Per Unit Area and Mass Per Volume of Aramid Papers and Paperboards
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM RR-D02-1591 2005 D7214-Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM RR-D02-1623 2007 D7214-Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

Korean Agency for Technology and Standards (KATS)

KS B 5323-2009 Variable area flowmeters
KS M ISO 11646-2017(2022) Leather－Measurement of area
KS M ISO 2286-2-2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
KS B 5323-2019 Variable area flowmeters
KS B 5323-2024 Variable area flowmeters
KS M ISO 11646-2022 Leather－Measurement of area
KS B 5323-1995 Variable area flowmeters
KS B 5323-2009(2019) Variable area flowmeters
KS B OIMLR 139-1-2006 Instruments for measuring the areas of leathers
KS M ISO 11646:2007 Leather－Measurement of area
KS M ISO 11646:2017 Leather－Measurement of area
KS C IEC 60580-2023 Medical electrical equipment — Dose area product meters
KS B 0249-1988 Stress area and bearing area for threaded fasteners
KS A 0611-1997(2022) Method of measurement by variable area flowmeters
KS B 0249-2003 Stress area and bearing area for threaded fasteners
KS A 0611-1982 Method of measurement by variable area flowmeters
KS M ISO 2286-2:2012 Rubber- or plastics-coated fabrics-Determination of roll characteristics-Part 2:Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS B 0249-2003(2023) Effective cross-sectional area of the screw and load area of the seating surface
KS M ISO 2286-2:2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS B 0249-2003(2018) Effective cross-sectional area of the screw and load area of the seating surface
KS M ISO 2286-2-2017(2022) Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
KS B OIMLR 139-1-2006(2016) Instruments for measuring the areas of leathers
KS M ISO 11605:2008 Paper and board－Calibration of variable-area flowmeters
KS M ISO 11605:2003 Paper and board－Calibration of variable-area flowmeters
KS B OIMLR 139-1-2006(2021) Instruments for measuring the areas of leathers
KS M ISO 11605-2003 Paper and board－Calibration of variable-area flowmeters
KS M ISO 2286-2-2022 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS B ISO 1070-2023 Hydrometry — Slope-area method
KS B OIMLR 139-1-2021 Instruments for measuring the areas of leathers
KS B ISO 748:2003 Measurement of liquid flow in open channels-Velocity-area methods
KS B ISO 748:2015 Measurement of liquid flow in open channels－Velocity-area methods
KS A 0611-1997 Method of measurement by variable area flowmeters
KS F 2010-2013(2018) Method of measurements for flow discharge in open channels — Velocity-area methods
KS B ISO 748-2015 Measurement of liquid flow in open channels－Velocity-area methods
KS B ISO 1070:2003 Liquid flow measurement in open channels－Slope-area method
KS C IEC 60580:2007 Medical electrical equipment－Dose area product meters
KS H ISO 12195:2009 Threshed tobacco-Determination of residual stem content
KS F 2010-2023 Method of measurements for flow discharge in open channels — Velocity-area methods
KS A 0611-1997(2017) Method of measurement by variable area flowmeters

German Institute for Standardization

DIN 277-2:2005-02 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN 277-2:1981 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN 277-2:2005 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN 277-2:1987 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN EN ISO 11646:2014-07 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
DIN EN IEC 60580:2021-07 Medical electrical equipment - Dose area product meters (IEC 60580:2019); German version EN IEC 60580:2020
DIN 277:2021-08 Areas and volumes in building construction
DIN EN ISO 11646:1998 Leather - Measurement of area (ISO 11646:1993); German version EN ISO 11646:1998
DIN 277-3:2005-04 Areas and volumes of building - Part 3: Quantities and reference units
DIN EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
DIN 277-3:1998 Areas and volumes of building - Part 3: Quantities and reference units
DIN EN ISO 10352:2020-12 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
DIN EN 60580:2001 Medical electrical equipment - Dose area product meters (IEC 60580:2000); German version EN 60580:2000
DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
DIN EN ISO 10352 E:2019-08 Determination of mass per unit area and fiber mass per unit area of fiber-reinforced plastic molding compounds and prepregs (draft)
DIN EN ISO 11646:1998-12 Leather - Measurement of area (ISO 11646:1993)
DIN EN ISO 11646 E:2012-01 Measurement of Leather Area (Draft)
DIN 1229:1996 Masses per unit area for gully tops and manhole tops for vehicular and pedestrian areas
DIN EN ISO 25178-600:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019); German version EN ISO 25178-600:2019
DIN EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998); German version EN ISO 2286-2:1
DIN EN 10049:2006-02 Measurement of roughness average Ra and peak count RPc on metallic flat products
DIN EN 2331:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993
DIN EN ISO 2286-2 E:2015-04 Determination of fabric properties of rubber or plastic coated fabric rolls Part 2: Methods of measurement of total mass per unit area, coating mass per unit area and mass per unit area of base fabric (draft)
DIN EN ISO 2286-2:2017-01 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-...
DIN 277:2021 Areas and volumes in building construction
DIN 277 E:2020-12 Areas and volumes in building construction
DIN 277 E:2020 Draft Document - Areas and volumes in building construction
DIN EN ISO 2286-3:1998 Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998
DIN EN ISO 2286-3 E:2015-04 Determination of fabric properties of rubber or plastic coated fabric rolls Part 3: Methods of measurement of overall mass per unit area, mass of coating per unit area and mass of base fabric per unit area (draft)
DIN EN 2559/A1:2023 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German and English version EN 2559:2022/prA1:2023
DIN EN ISO 10352:2019-08 Draft Document - Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO/DIS 10352:2019); German and English version prEN ISO 10352:2019
DIN EN 2559:2023 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German and English version EN 2559:2022
DIN SPEC 1107:2010-05 Hydrometry - Measurement of snow water equivalent using snow mass registration devices; German version CEN/TR 15996:2010
DIN EN 2559:2023-07 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German and English version EN 2559:2022 / Note: To be amended by DIN EN 2559/A1 (2023-08) (in preparati...
DIN EN 2559/A1:2023-08 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German and English version EN 2559:2022/prA1:2023 / Note: Date of issue 2023-07-07*Intended as an amend...

Association Francaise de Normalisation

NF EN 16074:2019 Paints and varnishes - Determination of the non-volatile matter content and the specific surface yield of pre-painting coatings
NF G52-021*NF EN ISO 11646:2014 Leather - Measurement of area
NF G52-021:2000 Leather - Measurement of area.
NF C74-103*NF EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
NF B56-013:1980 Fibragglo panels - Determination of density and surface mass
NF T57-511*NF EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
NF G37-102-2*NF EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2 : methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
NF P84-514:1994 Geomembranes. Determination of mass per unit area.
NF ISO 9030:2000 Crude oil - Determination of water and sediment content - Centrifugation method
NF C74-103*NF EN 60580:2004 Medical electrical equipment - Dose area product meters

Magyar Szabványügyi Testület

MSZ 10861/1-1980 Deposition machinery. Nickel content
MSZ 10861/4-1981 Deposition equipment. Silver content
MNOSZ 448-30.lap-1955 Iron and manganese ion content in sediments
MSZ 21196-1958 Paint and glaze area determination

Danish Standards Foundation

DS 13000:2007 Measurement of buildings, concepts of area and volume
DANSK DS/EN ISO 11646:2014 Leather - Measurement of area
DS/EN ISO 11646:1999 Leather - Measurement of area
DANSK DS/EN 60580:2001 Medical electrical equipment – Dose area product meters
DANSK DS/EN IEC 60580:2020 Medical electrical equipment – Dose area product meters
DS 13000:2021 Measurement of buildings, concepts of area and volume – CORRECTIONS 1
DS/EN 60580:2001 Medical electrical equipment - Dose area product meters
DANSK DS 13000:2007 Opmåling af bygninger, areal- og volumenbegreber
DANSK DS/ISO 10352:2020 Fibre-reinforced plastics – Moulding compounds and prepregs – Determination of mass per unit area and fibre mass per unit area
DS/EN ISO 2286-2:1999 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
DS/EN 2559:1998 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
DANSK DS/EN 2559:1997 Aerospace series – Carbon fibre preimpregnates – Determination of the resin and fibre content and the mass of fibre per unit area
DANSK DS/EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics – Determination of roll characteristics – Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
DANSK DS/EN ISO 10352:2020 Fibre-reinforced plastics – Moulding compounds and prepregs – Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
DANSK DS/ISO 25178-600:2019 Geometrical product specifications (GPS) – Surface texture: Areal – Part 600: Metrological characteristics for areal-topography measuring methods
DANSK DS/EN ISO 25178-600:2019 Geometrical product specifications (GPS) – Surface texture: Areal – Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)

Ente Nazionale Italiano di Unificazione

UNI EN 2559:1998 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
UNI EN ISO 11646:2000 Leather - Measurement of area
UNI EN ISO 11646:2014 Leather - Measurement of area
UNI 8635-15:1986 Building. Tests of products for discontinuous roofing. Determination of number for area unit and areic mass.
UNI 8635-15:2019 Building - Tests of products for discontinuous roofing - Part 15: Determination of number for area unit and areic mass
UNI EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
UNI EN 10049:2007 Measurement of roughness average Ra and peak count RPc on metallic flat products
UNI EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
UNI 6394-1977 Determination of total volume and cement content of unset concrete
UNI 9401:1989 Nets for agricultural uses. Determination of the mass per unit area.
UNI EN ISO 2286-2:2001 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

Spanish Association for Standardization (UNE)

UNE 59050:1993 LEATHER. MEASUREMENT OF AREA.
UNE-EN IEC 60580:2020 Medical electrical equipment - Dose area product meters (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 60580:2001 Medical electrical equipment - Dose area product meters.
UNE-EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
UNE 59531:2014 Footwear. Area measurements in soles
UNE-EN 2559:1997 AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN AND FIBRE CONTENT AND THE MASS OF FIBRE PER UNIT AREA.
UNE 35059-1:1990 FERROCHROMIUM AND FERROSILICOCHROMIUM. DETERMINATION OF CHROMIUM CONTENT. VOLUMETRIC METHOD
UNE-EN ISO 11646:1999 LEATHER. MEASUREMENT OF AREA. (ISO 11646:1993)
UNE-EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014)
UNE 35053-1:1985 FERROVANADIUM. DETERMINATION OF VANADIUM CONTENT. VOLUMETRIC METHOD
AENOR UNE-EN 2559:1997 AEROSPACE SERIES. CARBON FIBER PREPREGNATES. DETERMINATION OF THE RESIN AND FIBER CONTENT AND THE MASS OF FIBER PER UNIT AREA.
UNE-EN ISO 25178-600:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
AENOR UNE 36326-2/1M:1992 Steels and foundries. Determination of nickel content. Gravimetric or volumetric method.
UNE 7331:1975 DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD.
AENOR UNE-EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
UNE-EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
UNE-EN ISO 2286-2:1998 RUBBER- OR PLASTICS-COATED FABRICS. DETERMINATION OF ROLL CHARACTERISTICS. PART 2: METHODS FOR DETERMINATION OF TOTAL MASS PER UNIT AREA, MASS PER UNIT AREA OF COATING AND MASS PER UNIT AREA OF SUBSTRATE. (ISO 2286-2:1998).
UNE 40339:2002 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area.
UNE 35-053 Pt.1-1985 Iron vitriol. Determination of alum content. Volume determination
UNE 55-903-1985 Volumetric determination of glycerin content in soap
UNE 35-052 Pt.1-1985 Iron titanium. Determination of titanium content. Volume determination

Gosstandart of Russia

GOST R ISO 11646-2017 Leather. Measurement of area
GOST 9404-1988 Flour and bran. Method of moisture content determination
GOST ISO 3734-2016 Residual fuel oil. Determination of water and sediment content by centrifuge method

Belgian Standards Institute

NBN B 06-002-1983 Building surface area and volume, definitions and measurement modes
NBN T 04-248-1983 Tritolyl phosphate for industrial use - Determination of apparet free phenols content-Volumetric method
NBN P 32-007-1977 Zinc alloys - Determination of aluminium content Volumetric method
NBN-EN 430-1994 Resilient floor coverings - Determination of mass per unit area

South African Bureau of Standard

SANS 5845:2006 Bulk densities and voids content of aggregates
SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume
SANS 80:2004 Mass (oven-dry plus conventional allowance) per unit area of textile fabrics, free from non-fibrous material

Yugoslav Association for Standardization

JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content
JUS H.B8.288-1983 Fertilizers. Determination of content total-nitrogen. Volumetric method
JUS H.G8.067-1983 Reagents. Boric acid. Determination of boric acid content. Volumetric method
JUS H.G8.124-1984 Reagents. Ammonia solution. Determination af ammonia content. Volumetric method
JUS H.B8.286-1983 Fertilizers. Determination of content nitrat-nitrogen. Volumetric method
JUS H.B8.285-1983 Fertilizers. Determination of content amoniac-nitrogen. Volumetric method

Comitato Elettrotecnico Italiano

CEI EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
CEI EN 60580:2001 Medical electrical equipment - Dose area product meters

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60580:2014 Medical electrical equipment - Dose area product meters
OS GSO OIML R136-1:2008 Instruments for measuring the areas of leathers
OS GSO ISO 2286-2:2015 Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

Czech Standards Institute (UNMZ)

CSN 49 0162-1975 Testing of physical and mechanical pro- perties of chipboards. Volume weight and square weight

Standard Association of Australia （SAA）

AS 3778.3.3:1990 Measurement of water flow in open channels, Part 3.3: Velocity-area methods - Measurement by slope-area method
AS 1441.2:1973 Methods of test for coated fabrics, Method 2: Determination of mass per unit area and coating mass per unit area
AS 4878.3:2001 Methods of test for coated fabrics - Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
AS 1580.301.2:1990(R2013) Test Methods for Paints and Related Materials Nonvolatile Volume Content (Volume Solids)
AS 3778.3.3:2022 Measurement of water flow in open channels, Part 3.3: Velocity-area methods — Measurement by slope-area method (ISO 1070:2018, IDT)
AS 3778.3.2:1990 Measurement of water flow in open channels - Velocity-area methods - Measurement by moving-boat method

Polski Komitet Normalizacyjny (PKN)

PN C04087-1989 Crude petroleum and petroleum products Determination contens of water and sediment by the centrifuge method
PN B02365-1970 Surface area of buildings. Classification, definitions and methods of measurement
PN-EN ISO 10352-2021-02 E Fibre-reinforced plastics--Moulding compounds and prepregs--Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4957:2002 Medical electrical equipment - Dose area product meters

Bureau of Indian Standards

IS/IEC 60580-2019 Medical electrical equipment Dose area product meters
IS 14487-1997 Measurement of Area of Leather - Guideline
IS 2912-2022 Liquid Flow Measurement in Open Channels-Slope-Area Method

International Electrotechnical Commission (IEC)

IEC 60580:2019 RLV Medical electrical equipment - Dose area product meters
IEC 60580:2003 Medical electrical equipment - Dose area product meters
IEC 60580:2000 Medical electrical equipment – Dose area product meters (Edition 2.0)

Chile Instituto Nacional de Normalización

INDITECNOR 2.4-11ch-1948 Units of length, area, capacity, and volume
INDITECNOR 27-4 Leather: density and area measurements

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 60580:2020 Medical electrical equipment - Dose area product meters

American National Standards Institute （ANSI)

ANSI/TAPPI T410 om-2013 Grammage of paper and paperboard (weight per unit area)
ANSI/TIA/EIA 455-132-A-2001 Measurement of Effective Area of Single-Mode Optical Fiber

Lithuanian Standards Office

LST EN 60580-2002 Medical electrical equipment. Dose area product meters (IEC 60580:2000)
LST EN 2559-2001 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
LST EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
LST EN ISO 11646:2001 Leather - Measurement of area (ISO 11646:1993)
LST ISO 3801:1998 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
LST EN ISO 2286-2:2000 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998)
LST 1775-2002 Fish and fishery products. Determination of chloride (salt) content. Volumetric method

Association of German Mechanical Engineers

VDI/VDE 3513 BLATT 3-1989 Variable area flowmeters; selection and installation recommendations
VDI/VDE 3513 BLATT 3-1989 Variable area flowmeters; selection and installation recommendations
VDI/VDE 3513 Blatt 3-1986 Variable area flowmeters; selection and installation recommendations
VDI/VDE 3513 BLATT 1-2014 Variable area flowmeter — calculation method
VDI/VDE 3513 Blatt 1-2009 Variable area flowmeters - Calculation methods
VDI/VDE 3513 Blatt 1-2008 Schwebkoerperdurchflussmesser - Berechnungsverfahren
VDI VDE 3513 Blatt 1-2014 Variable-area flowmeters Calculation methods

Swiss Association for Standardization (SNV)

SN EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)

Austrian Standards

OENORM EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
ONORM B 1800-2002 Determination of areas and volumes of buildings
ONORM M 6293-1989 Analysis of sewage Sludge; determination of phosphorus in Sludges and Sediments
ONORM M 6270-1985 Determination ofthe water content and dry residue and/or dry matter of Sludge and Sediments

Netherlands Institute for Standardization

NEN 2320-1988 Areas and volumes of residential buildings and dwellings

American Gear Manufacturers Association

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair

Portuguese Institute of Quality

NP 1786-1985 Animal food. Determination of calcium content (volumetric method)
NP 1624-1979 Industrial urea. Determination of iron content (volumetric method)
NP 1622-1979 Industrial urea. Determination of alkali content (volumetric method)
NP 208-1986 Savons. Dosage des chlorures. Méthode volumétrique
NP 1353-1976 iron ore. Measurement of iron content by volumetric method

National Standardisation Body (ASRO)

STAS SR 13171-7-1995 Alluvial products and titanium-zirconium concentrates Determination of total iron
STAS SR 13171-10-1997 Alluvial products and concentrates with titaniu-zirconium content Method for determination of sulphur content
STAS SR 13171-11-1997 Alluvial products and concentrates with titaniu, zirconium content Method for determination of phosphorus content

International Truck and Engine Corporation (ITEC)

INTERN CEMS GT-1B-2009 Nonvolatile Content Of Paint By Volume

American Water Works Association (AWWA)

AWWA SOURCES59275 Landscape and Agricultural Area Measurement and Water Use Budgets
AWWA QTC97198 The Positive Effects of Corrosion Control on Lead Levels, and Biofilms

Japanese Industrial Standards Committee (JISC)

JIS K 6404-2-2:1999 Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrate

Türk Standardları Enstitüsü

TS 1139-1972 THE DETERMINATION OF THE WEIGHT PER UNIT OF THE SLIVERS
TS 1038-1971 PHOSPHORIC ACID FOR INDUSTRIAL USE DETERMINATION OF CALCIUM CONTENT VOLUMETRIC METHOD
TS 2236-1976 LIQUID FLOLW MEASUREMENT ?N ?PEN CHANNELS VELOCITY - AREA METHODS

Engineering Sciences Data Unit (ESDU)

ESDU 02007 B-2009 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 02007 A-2003 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 02007-2002 AMOPS: computer program for the calculation of area and moments of area of planar shapes

Finnish Standards Institute

SFS 4283-1979 Building area measurement. Small range basic measurement

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 7837-2-2007 Rubber.or plastics-coated fabrics.Determination of roll characteristics.Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
TCVN 6655-2000 Soil quality.Determination of carbonate content.Volumetric method
TCVN 7097-2002 Threshed tobacco.Determination of residual stem content

Canadian General Standards Board （CGSB)

CAN3 Z317.11-M82-1982(R1999) Area Measurement for Health Care Facilities

Canadian Standards Association (CSA)

CAN/CSA-Z317.11-2002(R2013) Area Measurement for Health Care Facilities
CAN/CSA Z317.11-2017(R2022) Area Measurement for Health Care Facilities
CSA Z317.11-17:2017 Area measurement for health care facilities
CAN/CSA Z317.11-2002(R2013) Area Measurement for Health Care Facilities

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0751-2-2019 Medical electrical equipment - Dose area product meters (IEC 62C/724/CDV:2018); German and English version prEN IEC 60580:2018

European Association of Aerospace Industries

AECMA PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area Issue P 1

Instrument Society of America (ISA)

ISA RP16.6-1961 Methods and Equipment for Calibration of Variable Area Meters (Rotameters)