Customs Consolidation

Customs Consolidation, Total:140 items.

The international standard classification for "Customs Consolidation" includes: Extraction and processing of petroleum and natural gas , Character sets and information coding , Vocabularies , Standardization. General rules , Moulding equipment .

The Chinese standard classification for "Customs Consolidation" includes: Codification , Standardization and Quality Management , Moulds .

Professional Standard - Petroleum

SY/T 6845-2011 Specification of offshore well abandonment

国家能源局

NB/T 42100-2016 Combined solid state switch for high voltage shunt capacitor bank

Group Standards of the People's Republic of China

T/CSEE 0349-2022 High voltage DC high speed parallel switch

海关总署

HS/T 22-2018 Customs information terminology
HS/T 1-2022 Customs Standards Writing Rules

Professional Standard - Customs

HS/T 18-2006 Customs Code Set
HS/T 22-2009 Informationization terminology of customs
HS/T 1-2006 Rules for the Drafting of Customs Standards

Professional Standard - Aerospace

QJ 776.18-1983 Small-sized Combination Die - Abutting Push-off Plate
QJ 773.3-1983 Small-sized Combination Die - Split Female Die with 120 in Width
QJ 773.34-1983 Small-sized Combination Die - Split Bent Female Die

Professional Standard - Electricity

DL/T 282-2018 Technical requirement for merging unit
DL/T 282-2012 Technical Requirement for Merging Unit
DL/T 281-2012 Testing Specification on Merging Unit

US-CFR-file

CFR 19-210.14-2013 Customs Duties. Part210:Adjudication and enforcement. Section210.14:Amendments to pleadings and notice; supplemental submissions; counterclaims; consolidation of investigations.
CFR 19-7.3-2015 Customs Duties. Part7:Customs relations with insular possessions and guantanamo bay naval station. Section7.3:Duty-free treatment of goods imported from insular possessions of the United States other than Puerto Rico.
CFR 19-101.4-2014 Customs Duties. Part101:General provisions. Section101.4:Entry and clearance of vessels at Customs stations.
CFR 19-24.23-2015 Customs Duties. Part24:Customs financial and accounting procedure. Section24.23:Fees for processing merchandise.

IX-EU/EC

COM(2002) 711 FINAL-2002 Proposal for a COUNCIL REGULATION on the control of concentrations between undertakings ("The EC Merger Regulation")
97/C 193/03-1997 Council Resolution Concerning a Handbook for Joint Customs Surveillance Operations

US-FCR

FCR COE EM 1110-2-1100 PT IV-2002 COASTAL ENGINEERING MANUAL (Incorporated Change 2: August 1, 2008)
FCR COE EM 1110-2-1100 PT VI-2002 COASTAL ENGINEERING MANUAL (Incorporated Change 3: September 28, 2011)
FCR COE EM 1110-2-1100 PT V-2003 COASTAL ENGINEERING MANUAL (Incorporated Change 2: April 1, 2008)
FCR COE CEGS 11710-1999 WARMING CABINETS, STERILIZERS, AND ASSOCIATED EQUIPMENT, NOTICE 1-6 (1999) INCORPORATED
FCR COE CEAGS 02935B-1991 SOD, NOTICE 1-4 (1994) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE CEGS 02521-2000 WATER WELLS, NOTICE 1 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 02870-2000 SITE FURNISHINGS, NOTICE 1 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR NAV GSH 7.3-1966 ROOFING, SHINGLES, REVISION 1 INCORPORATED, NOTICE 13 INCORPORATED
FCR COE CEGS 06100-2000 ROUGH CARPENTRY, NOTICE 1-6 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 08360-2000 SECTIONAL OVERHEAD DOORS, NOTICE 1 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 14240-2000 ELEVATORS, HYDRAULIC, NOTICE 1-7 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEAGS 02580A-1992 PAVEMENT MARKINGS, NOTICE 1-8 (1996) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE CEGS 03101-2000 FORMWORK FOR CONCRETE, NOTICE 1 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 02510-2000 WATER DISTRIBUTION SYSTEM, NOTICE 1-4 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 07810-2000 SPRAY-APPLIED FIREPROOFING, NOTICE 1-4 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEAGS 02935A-1991 HYDROSEEDING, NOTICE 1-4 (1994) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE CEGS 06200-2000 FINISH CARPENTRY, NOTICE 1-3 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEAGS 07220A-1993 ROOF INSULATION, NOTICE 1-6 (1996) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE CEGS 02235-1988 LIMEROCK BASE COURSE, NOTICE 1-7 (1993) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE CEAGS 02110A-1991 CLEARING AND GRUBBING, NOTICE 1-2 (1994) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE CEAGS 15895B-1992 PIPING FOR AIR-CONDITIONING SYSTEM, NOTICE 1 (1993) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR NAV GSH 2.2-1966 CLEARING, STRIPPING AND ROUGH GRADING, REVISION 1 INCORPORATED, NOTICE 1-4 INCORPORATED
FCR COE EM 1110-2-1100 PT I-2002 COASTAL ENGINEERING MANUAL (Incorporated Change 1: July 31, 2003; Change 2: April 1, 2008)
FCR NAV GSH 10.2-1966 BATH ROOM ACCESSORIES, REVISION 1-2 INCORPORATED, NOTICE 1-2 INCORPORATED
FCR COE CEGS 02115-2000 UNDERGROUND STORAGE TANK REMOVAL, NOTICE 1 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEAGS 02586A-1990 REMOVAL OF PAVEMENT MARKINGS, NOTICE 1 (1992) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE EM 1110-2-1100 PT III-2002 COASTAL ENGINEERING MANUAL (Incorporated Change 1: July 31, 2003; Change 2: August 1, 2008)
FCR COE EM 1110-2-1100 PT II-2002 COASTAL ENGINEERING MANUAL (Incorporated Change 1: July 31, 2003; Change 2: August 1, 2008)
FCR COE CEGS 02237-1989 WATER-BOUND MACADAM BASE COURSE, NOTICE 1-5 (1993) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE CWGS 15487-1991 TURBINE LUBRICATING OIL, NOTICE 1-2 (1994) INCORPORATED, METRIC CHANGE (1994) INCORPORATED
FCR COE CEGS 15654-1989 COMMISSARY REFRIGERATION SYSTEM, NOTICE 1-4 (1992) INCORPORATED, CHANGE 1 (1991) INCORPORATED
FCR COE CEGS 15400-2000 PLUMBING, GENERAL PURPOSE, NOTICE 1-15 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 15690-2000 EVAPORATIVE COOLING SYSTEMS, NOTICE 1-3 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CWGS 16321-1992 ELECTRICAL INSULATING MINERAL OIL, NOTICE 1-2 (1994) INCORPORATED, METRIC CHANGE (1994) INCORPORATED
FCR COE CEGS 02554-2000 ABOVEGROUND HEAT DISTRIBUTION SYSTEM, NOTICE 1 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 03300-2000 CAST-IN-PLACE STRUCTURAL CONCRETE, NOTICE 1-4 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 07412-2000 NON-STRUCTURAL METAL ROOFING, NOTICE 1-3 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 02811-2000 UNDERGROUND SPRINKLER SYSTEMS, NOTICE 1-10 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEAGS 07540A-1992 ELASTOMERIC ROOFING, FLUID APPLIED, NOTICE 1-2 (1992) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE CEGS 15190-2000 GAS PIPING SYSTEMS, NOTICE 1-2 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 15080-2000 THERMAL INSULATION FOR MECHANICAL SYSTEMS, NOTICE 1-3 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEAGS 09411A-1994 BONDED TERRAZZO, NOTICE 1 (1994) INCORPORATED
FCR COE CEGS 16225-1989 STATIONARY STEAM TURBINE GENERATORS, NOTICE 1-3 INCORPORATED, METRIC CHANGE (1993) INCORPORATED
FCR COE CE 1308-1958 STONE PROTECTION (SLOPES AND CHANNELS), AMENDMENT 1 (1959) INCORPORATED, AMENDMENT 2 (1962) INCORPORATED
FCR COE CEAGS 09680A-1997 CARPET, NOTICE 1 (1997) INCORPORATED
FCR COE CEGS 02552-2000 PRE-ENGINEERED UNDERGROUND HEAT DISTRIBUTION SYSTEM, NOTICE 1-2 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEGS 15070-2000 SEISMIC PROTECTION FOR MECHANICAL EQUIPMENT, NOTICE 1-2 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
FCR COE CEAGS 15400A-1990 PLUMBING, PIPING DRAINAGE, WASTE, AND VENT, NOTICE 1 (1992) INCORPORATED, METRIC CHANGE (1993) INCORPORATED

European Committee for Standardization (CEN)

EN ISO 9875:2001 Ships and Marine Technology - Marine Echo-Sounding Equipment ISO 9875:2000; Incorporating Technical Corrigendum February 2006
EN 14744:2005 Inland navigation vessels and sea-going vessels - Navigation light
EN 13852-1:2004 Cranes - Offshore cranes - Part 1: General - purpose offshore cranes
EN 16992:2017 Competency for Customs Representatives
EN 659:2003 Protective gloves for firefighters (Incorporates Amendment A1: 2008; Incorporating corrigendum June 2009)

ABS - American Bureau of Shipping

ABS 203-2013 GUIDE FOR CERTIFICATION OF MARITIME EDUCATION FACILITIES AND TRAINING COURSES (G-CMET) (Incorporating Corr 1: July 2015; Incorporating Notice 1: November 1st 2016)

GB-REG

REG NASA-LLIS-0347--1994 Lessons Learned - Impact of Industrial Mergers/Key Management Changes

Korean Agency for Technology and Standards (KATS)

KS K 1309-1995 Touch and close fastener
KS K 1309-2023 Touch and close fastener
KS K 1309-2016 Touch and close fastener
KS V 8855-1997(2012) SHIPBUILDING - ROTARY SWITCHES
KS V 8854-2002(2012) UNIT SWITCHES FOR MARINE USE
KS V 8855-1987 SHIPBUILDING - ROTARY SWITCHES
KS V 8854-1976 UNIT SWITCHES FOR MARINE USE
KS B 7609-2007(2017) Cutting knives for combines
KS V 8853-2002(2012) SMALL TOGGLE SWITCHES FOR MARINE USE
KS V 8853-1976 SMALL TOGGLE SWITCHES FOR MARINE USE

AIAG - Automotive Industry Action Group

TC-4-1997 Information Kit for Customs Compliance Under the MOD Act (Version 1)

SCC

TDCC 350:1992 Ocean - Customs Release Information
IEC 62493:2022 Assessment of lighting equipment related to human exposure to electromagnetic fields CONSOLIDATED EDITION
IEC 60096-2:1961/AMD1:1990 Amendment 1 - Radio-frequency cables. Part 2: Relevant cable specifications. (Consolidated edition)
AENOR UNE-EN 16992:2017 Competency for Customs Representatives
DANSK DS/EN 16992:2017 Competency for Customs Representatives
NS-EN 16992:2017 Competency for Customs Representatives
AENOR UNE-EN ISO 15085:2003 Small boats. Prevention of people falling into the sea and reboarding on board (ISO 15085:2003).
AENOR UNE-EN 1416:1997 TOUCH AND CLOSE FASTENERS. DETERMINATION OF CURVATURE.
IEC 60038:2021 IEC standard voltages CONSOLIDATED EDITION
AWWA WQTC60788 FPA Intensity Does Not Always Correlate with Vapor or Aqueous Phase Concentration of Problematic Odorous Compounds

IMO - International Maritime Organization

IH260E-2016 International Maritime Solid Bulk Cargoes Code (Includes Supplement; Incorporating Amendment: 03/15)
IF260E-2012 International maritime Solid Bulk Cargoes Code (Includes Supplement; Incorporating Amendment: 01/11)
IA811E-2007 Code for the Construction and Equipment of Mobile Offshore Drilling Units (Consolidated Edition: 2001; Electronic Edition 2007)

CEN - European Committee for Standardization

EN 13255:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals (Incorporating Corrigendum September 2003; Incorporates Amendment A1: 2005)

International Maritime Organization (IMO)

IMO IF260E-2012 International maritime Solid Bulk Cargoes Code (Includes Supplement; Incorporating Amendment: 01/11)
IMO IA811E-2007 Code for the Construction and Equipment of Mobile Offshore Drilling Units (Consolidated Edition: 2001; Electronic Edition 2007)

RU-GOST R

GOST 31892-2012 Conformity assessment (attestation) system of the Customs union. Fundamentals
GOST R 56826-2015 Intellectual property. Customs protection

Aeronautical Radio Inc.

ARINC 623-2 ITEM 3.0 Oceanic Clearance

GSO

OS GSO ISO 7488:2016 Dental amalgamators
GSO ISO 7488:2016 Dental amalgamators

IETF - Internet Engineering Task Force

RFC 7396-2014 JSON Merge Patch

Canadian Standards Association (CSA)

CSA Z240 RV SERIES-2014 Recreational vehicles (Fourth Consolidated Edition; Incorporating Errata: September 2015)

Japanese Industrial Standards Committee (JISC)

JIS F 8844:1989 Unit switches for marine use

US-COE

COE CEGS 02525-1998 RELIEF WELLS, NOTICE 1 (1998) INCORPORATED, METRIC CHANGE (1998) INCORPORATED
COE CEAGS 02580A-1992 PAVEMENT MARKINGS, NOTICE 1-8 (1996) INCORPORATED, METRIC CHANGE (1993) INCORPORATED
COE CEGS 16415-2000 ELECTRICAL WORK, INTERIOR, NOTICE 1-4 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
COE CEGS 02811-2000 UNDERGROUND SPRINKLER SYSTEMS, NOTICE 1-10 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
COE CEGS 10430-2000 EXTERIOR SIGNAGE, NOTICE 1-2 (2000) INCORPORATED, SPECIAL CHANGE (2000) INCORPORATED
COE CEAGS 02586A-1990 REMOVAL OF PAVEMENT MARKINGS, NOTICE 1 (1992) INCORPORATED, METRIC CHANGE (1993) INCORPORATED

AREMA - American Railway Engineering and Maintenance-of-Way Association

CHAPTER 30/PART 12-2000 Concrete Ties (Chapters 3 and 10 Have Been Combined to Form Chapter 30; Volume 1/Track)
CHAPTER 30/PART 4-2001 Concrete Ties (Chapters 3 and 10 Have Been Combined to Form Chapter 30; Volume 1/Track)

API - American Petroleum Institute

API SPEC 2H-1974 SPECIFICATION FOR CARBON MANGANESE STEEL PLATE FOR OFFSHORE PLATFORM TUBULAR JOINTS (First Edition; Incorporating Supplement 1: January 1975)
API STD 1104-1980 Standard for Welding Pipelines and Related Facilities (Fiftheenth Edition; Incorporating Supplement 1: June 1982)
API RP 2SM-2001 Recommended Practice for Design@ Manufacture@ Installation@ and Maintenance of Synthetic Fiber Ropes for Offshore Mooring (First Edition; Incorporating Addendum: 5/2007)
API STD 1104-1999 Welding of Pipelines and Related Facilities (Nineteenth Edition; Incorporated Errata 1: October 31@ 2001)

Association Francaise de Normalisation

NF EN 16992:2017 Compétences des représentants en douane
NF Z09-001*NF EN 16992:2017 Competency for customs representatives

US-DOT

DOT 49 CFR PART 1180-2010 RAILROAD ACQUISITION, CONTROL, MERGER, CONSOLIDATION PROJECT, TRACKAGE RIGHTS, AND LEASE PROCEDURES

RO-ASRO

STAS 9502-1974 THIN PARALLEL KEY JOINTS Sections of keyways

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C37.015-2009 IEEE Guide for the Application of Shunt Reactor Switching
IEEE Std C37.015-2017 IEEE Guide for the Application of Shunt Reactor Switching

IEC - International Electrotechnical Commission

IEC 60747-16-4:2017 Semiconductor devices – Part 16-4: Microwave integrated circuits – Switches (Edition 1.2; Consolidated Reprint)

British Standards Institution (BSI)

BS EN 16992:2017 Competency for Customs Representatives
PD IEC TS 63102:2021 Grid code compliance assessment methods for grid connection of wind and PV power plants
BS EN ISO 22777:2004 Footwear. Test method for accessories: touch and close fasteners. Peel strenght before and after repeated closingst method for accessories. Touch and close fasteners. Peel strength before and after repeated closing