Airflow Test Equipment

Airflow Test Equipment, Total:200 items.

The international standard classification for "Airflow Test Equipment" includes: Power stations in general , Power transmission and distribution networks , Electrical equipment of ships and of marine structures , Measurement of electrical and magnetic quantities , Diagnostic equipment , Data communication networks .

The Chinese standard classification for "Airflow Test Equipment" includes: Electric power testing technique , Electrical, observation/communication and navigation equipment for vessel in general , Electric energy measurement and load control system , Medical apparatus and devices in general , Data communication equipment .

Group Standards of the People's Republic of China

T/WZSJD 2332-2024 Valve flow and flow resistance coefficient test equipment
T/CIET 20-2023 DC motor air tightness automatic test equipment

State Grid Corporation of China

Q/GDW 118-2005 AC test procedures for secondary electrical equipment in DC converter stations
Q/GDW 275-2009 Handover acceptance test of electrical equipment in ±800kV DC system
Q/GDW 111-2004 Handover test procedures for high-voltage DC electrical equipment in DC converter stations
Q/GDW 321-2009 1000kV AC electrical equipment field test equipment technical conditions and preparation instructions

Professional Standard - Energy and Power Planning

DL/T 1129-2009 Stardard for hand-over test of DC converter station secondary electric equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 24846-2009 Preventive test standards of 1000 kV AC electrical equipments
GB/T 22193-2008 Electrical installations in ships - Equipment - Semiconductor convertors
GB/T 17215.211-2006 Electricity metering equipment (AC)—General requirements, tests and test conditions— Part 11: Metering equipment
GB/T 17215.211-2021 Electricity metering equipment(AC)—General requirements, tests and test conditions—Part 11：Metering equipment
GB/T 24846-2018 Preventive test standards of 1 000 kV AC electrical equipments

Professional Standard - Medicine

YY/T 0841-2011 Medical electrical equipment—Recurrent test and test after repair of medical electrical equipment
YY/T 0841-2023 Medical electrical equipment---Recurrent test and test after repair ofmedical electrical equipment

Professional Standard - Post and Telecommunication

YD/T 4142-2022 Test specification for network aggregation and distribution device

Professional Standard - Hydroelectric Power

SD 301-1988 Code on hand-over and preventive test of AC 500 kV electric equipment

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 3868-1995 Development of a Test Facility for Airflow Measurements in Variable-Density Environments
ASHRAE EQUIP SI CH 19-2008 ROOM AIR DISTRIBUTION EQUIPMENT

Belgian Standards Institute

NBN 688-1971 Testing of fluid flow through air flow pressure reducing element equipment. Overview
NBN 688 F-1966 Testing of fluid flow through air flow pressure reducing element equipment. Overview
NBN 723 F-1967 Through the air flow pressure reducing element. Measurement of fluid flow rate by nozzle equipment
NBN 722 F-1967 Through the air flow pressure reducing element. Determination of Fluid Flow by Orifice Plate Equipment
NBN 763-F-1968 Use air flow pressure reducing element equipment to measure fluid flow. Venturi tube

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0404-4-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 4: Handheld and manually operated current clamps/sensors for measurement of protectives conductor currents and touch currents of electrical devices
VDE 0404-3-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
VDE 0413-16-2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing@ measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical e
VDE 0413-14-2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing@ measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (IEC 61557-1
VDE 0702-2019 Recurrent Test of Electrical Equipment; German and English version prEN 50699:2019
VDE 0404-2-2002 Testing and measuring equipment for checking the electric safety of electric devices - Part 2: Testing equipment for tests after repair@ change or in case of repeat tests
VDE VDE 0701-0702 Pruefung nach Instandsetzung, Aenderung elektrischer Geraete - Wiederholungspruefung elektrischer Geraete - Allgemeine Anforderungen fuer die elektrische Sicherheit

German Institute for Standardization

DIN VDE 0404-4:2005-04 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 4: Handheld and manually operated current clamps/sensors for measurement of protective conductor currents and touch currents of electrical devices
DIN EN 61557-16 E:2013-05 Draft Document - Electrical safety in distribution systems up to 1000 V a.c and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the safety of electrical equipment and medical electrica...
DIN EN 61557-16 E:2013 Draft Document - Electrical safety in distribution systems up to 1000 V a.c and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the safety of electrical equipment and medical electrica...
DIN VDE 0404-3:2005-04 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
DIN EN 60512-11-7:2004-06 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003); German version EN 60512-11-7:2003 / Note: DIN EN 60512-11-7 (1996-08) remains valid alongside t...
DIN EN 60512-11-14:2004-06 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003 / Note: DIN EN 60512-11-14 (1997-06) remains valid alongs...
DIN EN IEC 61557-14:2025-09 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
DIN EN 61557-14:2014-02 Electrical safety in low voltage distribution systems up to 1 000 V ac and 1 500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (IEC 6155...
DIN EN 61557-14 E:2011 Draft Document - Electrical safety in low voltage distribution systems up to 1000 V a.c and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machi...
DIN EN 437 A1 E:2007-03 Test gases - Test pressures - Appliance categories; German version EN 437:2003/prA1:2007
DIN EN IEC 61557-16:2025-09 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical eq...
DIN EN 437 A-1 E:2007-03 Test gases - Test pressures - Appliance categories; German version EN 437:2003/prA1:2007
DIN EN IEC 61557-14 E:2022 Draft Document - Electrical safety in low voltage distribution systems up to 1000 V a.c and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machi...
DIN EN IEC 61557-14 E:2022-10 Draft Document - Electrical safety in low voltage distribution systems up to 1000 V a.c and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machi...
DIN EN 61557-14 E:2011-04 Draft Document - Electrical safety in low voltage distribution systems up to 1000 V a.c and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machi...
DIN EN 14594:2005-07 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking
DIN VDE 0404-2:2002-05 Testing and measuring equipment for checking the electrical safety of electrical devices - Part 2: Testing equipment for tests after repair, change or in case of repeat tests
DIN EN 61557-16:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical e
DIN EN 60761-1:2005-05*VDE 0493-1-1:2005-05 Equipment for continuous monitoring radioactivity in gaseous effluents
DIN EN 60761-4:2005-05*VDE 0493-1-4:2005-05 Equipment for continuous monitoring radioactivity in gaseous effluents
DIN EN 60761-2:2005-05*VDE 0493-1-2:2005-05 Equipment for continuous monitoring radioactivity in gaseous effluents
DIN EN 60761-3:2005-05*VDE 0493-1-3:2005-05 Equipment for continuous monitoring radioactivity in gaseous effluents
DIN EN ISO 13297:2001 Small craft - Electrical systems - Alternating and direct current installations
DIN EN 61557-14:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (IEC 61557-1
DIN EN 60761-5:2005-05*VDE 0493-1-5:2005-05 Equipment for continuous monitoring radioactivity in gaseous effluents
DIN EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003
DIN EN 12238:2001-12 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application; German version EN 12238:2001
DIN EN 50699:2019-06 Draft Document - Recurrent Test of Electrical Equipment; German and English version prEN 50699:2019

GCC Standardization Organization

GSO IEC 61557-14:2021 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing,measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
GSO IEC 60512-11-14:2015 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
GSO IEC 61557-16:2017 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical eq
GSO IEC 60512-11-7:2015 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
GSO IEC 62052-11:2007 Electricity Metering Equipment (AC) - General Requirements Tests and Test Conditions Part II: Metering Equipment
GSO IEC 62052-21:2013 Electricity metering equipment (A.C.) - General requirements, tests and test conditions-Part 21: Tariff and load control equipment

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 61557-14:2022 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing,measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
BH GSO IEC 60512-11-14:2016 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
BH GSO IEC TR 60736:2024 Testing Equipment for Electrical Energy Meters

Comitato Elettrotecnico Italiano

CEI EN 61557-14:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 14: Equipment for testing the safety of electrical equipment of machinery
CEI EN IEC 61557-14:2025 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
CEI EN IEC 61557-16:2025 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical eq...
CEI EN 50699:2021 Recurrent Test of Electrical Equipment
CEI EN IEC 60512-9-5:2021 Connectors for electrical and electronic equipment - Tests and measurements Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

Spanish Association for Standardization (UNE)

UNE-EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (Endorsed...
UNE-EN 50699:2020 Recurrent Tests of Electrical Equipment (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-EN 61557-16:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrica...
UNE-EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements -- Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
UNE-EN 60512-11-7:2004 Connectors for electronic equipment - Tests and measurements -- Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test

Danish Standards Foundation

DANSK DS/EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
DANSK DS/EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
DS/EN 437:2021 Test gases – Test pressures – Appliance categories
DANSK DS/EN 50699:2020 Recurrent Tests of Electrical Equipment
DS/EN 50699:2020 Recurrent Tests of Electrical Equipment
DANSK DS/EN 12238:2001 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application
DANSK DS/EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment – Tests and measurements – Part 9-5: Endurance tests – Test 9e: Current loading, cyclic
DS/EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
DANSK DS/EN 12239:2001 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications
DS/EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test

British Standards Institution (BSI)

BS EN 60512-11-14:1997 Connectors for electronic equipment. Tests and measurements. Climatic tests-Test 11p. Flowing single gas corrosion test
BS EN 60512-11-7:1997 Connectors for electronic equipment. Tests and measurements. Climatic tests-Test 11g. Flowing mixed gas corrosion test
BS EN 61557-16:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Equipment for testing the effectiveness of the protective measures of electrical equipment and
BS EN IEC 61557-14:2024 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures - Equipment for testing the safety of electrical equipment of machinery
BS EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d c. Equipment for testing, measuring or monitoring of protective measures. Equipment for testing the safety of electrical equipment of machinery
BS EN 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Climatic tests - Flowing single gas corrosion test
BS EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment. Tests and measurements - Endurance tests. Test 9e: Current loading, cyclic
BS EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Flowing mixed gas corrosion test
12/30262863 DC BS EN 61557-16. Electrical safety in distribution systems up to 1000 V a.c and 1500 V d.c- Equipment for testing, measuring or monitoring of protective measures. Part 16 . Equipment for testing the safety of electrical equipment and medical electrical ...
10/30216301 DC BS EN 61557-14. Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 14. Equipment for testing the safety of electrical equipment for machinery
DD ENV 50231:1997 Aeronautical ground lighting electrical installation. Constant current regulator. Equipment specifications and tests
DD ENV 50231:1997(1999) Constant current regulators for aviation ground lighting electrical installations: Equipment specifications and tests
BS EN ISO /IEEE 11073-10421:2026 Health informatics. Device interoperability-Personal health device communication. Device specialization. Peak expiratory flow monitor (peak flow)
BS EN IEC 61557-9:2025 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures - Equipment for insulation fault location in IT systems
BS EN ISO 13297:2021 Small craft. Electrical systems. Alternating and direct current installations
BS EN 61557-8:1997 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring ormonitoring of protective measures-Insulation monitoring devices for IT systems
BS EN IEC 60512-11-1:2019 Connectors for electrical and electronic equipment. Tests and measurements - Climatic tests. Test 11a. Climatic sequence

Association Francaise de Normalisation

NF C42-198-14*NF EN IEC 61557-14:2024 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 14 : equipment for testing the safety of electrical equipment of machinery
NF L51-510:1962 Electrical equipment for aircraft - Overcurrent detectors for alternating current
NF EN 60512-11-14:2006 Connectors for electronic equipment - Tests and measurements - Part 11-14: climatic tests - Test 11p: corrosion test in the flow of a gas
NF EN IEC 61557-14:2024 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 14 : equipment for testing the safety of electrical equipment of machinery
NF EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: climatic tests - Test 11g: corrosion test in a gas mixture flow
NF EN IEC 61557-16:2024 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 16 : equipment for testing the effectiveness of the protective measures of electrical e...
NF EN 437:2021 Test gases - Test pressures - Device categories
NF C42-198-14*NF EN 61557-14:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14 : equipment for testing the safety of electrical equipment for machinery
NF EN 50699:2020 Recurring tests of electrical devices
NF C74-302:1964 Electromedical equipment. Galvanic current or low-medium-frequency equipment.
NF M87-293*NF EN ISO 13354:2015 Petroleum and natural gas industries - Drilling and production equipment - Shallow gas diverter equipment
NF EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current load, cyclic test
NF C93-400-11-14*NF EN 60512-11-14:2006 Connectors for electronic equipment - Tests and measurements - Part 11-14 : climatic tests - Test 11p : flowing single gas corrosion test
NF C44-052-11*NF EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11 : metering equipment
NF S76-020-8*NF ISO 16900-8:2015 Respiratory protective devices - Methods of test and test equipment - Part 8: measurement of RPD air flow rates of assisted filtering RPD
NF EN ISO 9012:2011 Gas Welding Equipment - Aspirated Air Gas Hand Torches - Specifications and Testing
NF C42-198-16*NF EN IEC 61557-16:2024 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 16 : equipment for testing the effectiveness of the protective measures of electrical e...

Asociación Española de Normalización (AENOR)

UNE-EN IEC 61557-14:2025 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
AENOR UNE-EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
AENOR UNE-EN 60512-11-14:2004 Connectors for electronic equipment - Tests and measurements -- Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 61557-16:2017 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical eq

Swedish Institute for Standards

SS-EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
SIS SS IEC 564:1982 Electrical measuring instruments — D.C bridges for measuring resistance
SS-EN 12238:2001 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow applications
SS-EN 437:2021 Test gases - Test pressures - Appliance categories
SS-EN 437/A1:1997 Test gases - Test Pressures - Appliance categories
SS-EN 50699:2021 Recurrent Test of Electrical Equipment
SS-EN 61557-16:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrica...
SS-EN 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p - Flowing single gas corrosion test

Indonesia Standards

SNI 7123:2019 Peralatan uji alir fluida sumur panas bumi
SNI 13-7123-2005 The criteria of fluid flow test equipment for geothermal wells

Society of Automotive Engineers (SAE)

SAE ARP1398 Testing of Oxygen Equipment
SAE ARP1398A Testing of Oxygen Equipment
SAE ARP1398-1989 Testing of Oxygen Equipment
SAE ARP1398A-2021 Testing of Oxygen Equipment
SAE ARP1398-1992 TESTING OF OXYGEN EQUIPMENT
SAE ARP6196 Gas Turbine Engine Test Facility Audit Process
SAE ARP6196A Gas Turbine Engine Test Facility Audit Process
SAE ARP6196-2012 Gas Turbine Engine Test Facility Audit Process

Bureau of Indian Standards

IS/IEC 61557-14-2023 Electrical Safety in Low Voltage Distribution Systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for Testing, Measuring or Monitoring of Protective Measures - Part 14 Equipment for Testing the Safety of Electrical Equipment for Machinery
IS/IEC 61557-16-2023 Electrical Safety in Low Voltage Distribution Systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for Testing, Measuring or Monitoring of Protective Measures - Part 16 Equipment for Testing the Effectiveness of the Protective Measures of Electrical Equi
IS 12346-1988 Specification for AC energy meter test equipment

Yugoslav Association for Standardization

JUS N.S5.005-1982 Continuour leakage current testing of medical electrical eguipment and accessories

Magyar Szabványügyi Testület

MSZ 8607-1973 Mobile equipment, gas and water heating equipment products and testing
MSZ 2100/2-1972 Electrical and mechanical equipment testing

United States Navy

NAVY A-A-50624-1994 AIRFLOW MONITORING EQUIPMENT

International Electrotechnical Commission (IEC)

IEC 61557-14:2013 Electrical safety in low voltage distribution systems up to 1000 V a.c and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
IEC 61557-16:2014 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equi
IEC 60512-11-7:1996 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods Part 11: Climatic Tests - Section 7: Test 11g: Flowing Mixed Gas Corrosion Test (Edition 1.0)
IEC 62052-11:2003/AMD1:2016 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment; Amendment 1
IEC 61557-10:2000 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective meas
IEC 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 60512-11-14:2003 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests; Test 11p: Flowing single gas corrosion test
IEC 61557-12:2018 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring d

Gosstandart of Russia

GOST R 70382-2022 Refrigerating equipment. Refrigeration air coolers with forced airflow. Performance test conditions
GOST R IEC 62353-2013 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
GOST 33968-2016 Protection against overcurrent and insulation monitoring mine electric equipment
GOST 1516.2-1997 Electrical equipment and installations for a.c. voltage 3 kV and higher. General methods of dielectric tests
GOST 1516.2-1976 Electrical equipment and installations for a. c. voltages 3 kV and higher. General test methods of electrical strength of insulation

National Standardisation Body (ASRO)

STAS 12743/3-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Current-carrying capacity tests
STAS 4297-1979 Electricii Equipinent RAT1?D GURHENTS
STAS 11053/14-1985 Testing devices for electrical purposes IMPACT TEST APPARATUS
STAS 11053/8-1978 Testing devices for electrical purposesBALL PRESSURE APPARATUS
STAS 11053/5-1978 Testing devices for electrical purposesSPLASH APPARATUS
STAS 11053/13-1985 Testing devices for electrical purposes Pressure apparatus

Finnish Standards Institute

SFS 5116-1985 Air conditioning device. Fan coil unit. Nozzle convection. Testing and Equipment Requirements

Association of German Mechanical Engineers

VDI 3672-1972 STAUBMESSUNGEN IN STROeMENDEN GASEM. REGISTRIERENDE MEss- EINRICHTUNGEN@ PHOTOELELTRISCHE MEssGERAeTE@ KALIBRIERUNG
VDI/VDE/DGQ/DKD 2622 Blatt 15.4-2010 Calibration of measuring equipment for electrical quantities - Passive measuring equipment for use in EMC-applications - Current clamps

Standards New Zealand

NZS 3019:2004 Electrical installations - In-service testing

Japanese Industrial Standards Committee (JISC)

JIS T 8023:2006 Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven
JIS S 3200-4:1997(2002) Equipment for water supply service - Test method of prevention from back current
JIS S 3200-4:1997 Equipment for water supply service -- Test method of prevention from back current

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 2960-2023 IEEE Guide for Testing Equipment for Direct Current Electrical Energy Meters
IEEE Std 2960-2023 IEEE Guide for Testing Equipment for Direct Current Electrical Energy Meters
IEEE P1861/D5.1, January 2014 IEEE Draft Guide for On-site Acceptance Tests of Electrical Equipment and System Commissioning of 1000 kV AC and Above

Ente Nazionale Italiano di Unificazione

UNI EN 12239:2006 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications
UNI EN 613:2004 Independent gas-fired convection heaters

European Committee for Electrotechnical Standardization（CENELEC）

PREN 50699-2019 Recurrent Test of Electrical Equipment
EN 50699:2020 Recurrent Test of Electrical Equipment
EN 60512-11-14:1997 Electromechanical Components for Electronic Equipment; Basic Testing Procedures and Measuring Methods; Part 11: Climatic Tests; Section 14: Test 11p - Flowing Single Gas Corrosion Test
EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
EN 60512-11-7:1996 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 11: Climatic Tests Section 7: Test 11g: Flowing Mixed Gas Corrosion Test

Polski Komitet Normalizacyjny (PKN)

PN-EN 50699-2021-07 E Recurrent Test of Electrical Equipment

Lithuanian Standards Office

LST EN 60512-11-14-2004 Connectors for electronic equipment. Tests and measurements. Part 11-14: Climatic tests. Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003)
LST EN 62353-2015 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment (IEC 62353:2014)
LST EN 50699-2021 Recurrent Tests of Electrical Equipment
LST EN 62353-2008 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment (IEC 62353:2007)

Institute of Environmental Sciences and Technology

IEST RP-CC002.4-2016 Unidirectional-Flow, Clean-Air Devices

International Organization for Standardization (ISO)

ISO 13297:1995 Small craft - Electrical systems - Alternating current installations
ISO 13297:2020 Small craft - Electrical systems - Alternating and direct current installations