Conduction Test Equipment

Conduction Test Equipment, Total:286 items.

The international standard classification for "Conduction Test Equipment" includes: Energy and heat transfer engineering in general , Transmission systems , Electrical engineering in general , Electromagnetic compatibility(EMC) , Other road vehicle systems , Power stations in general .

The Chinese standard classification for "Conduction Test Equipment" includes: Technical management , Reliability and maintainability , Basic standards and general methods , Electromagnetic compatibility , Hygiene, safety and labor protection , Electronic/electrical equipment and instruments for vehicle in general , Technical management , Electric power testing technique , Power semiconductor device and parts .

国家能源局

NB/T 10672-2021 Environmental technical requirements and guides—Smart power tunnel monitoring device
NB/T 10673-2021 Environmental adaptation requirements and technical guidelines—sensor equipment of smart distribution station
NB/T 10190-2019 Technical specifications for arc flash protection test equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6113.102-2008 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted dis
GB/T 3483-1983 Guidance of lightning test for electronic equipments
GB 5080.2 86 Equipment reliability testing Guidance for the design of test cycles
GB/T 6422-2009 Testing guide for energy consumption of equipment
GB/T 13855-1992 Specification for path transmission automatic measuring equipment
GB/T 25296-2022 Guidelines on general tests for safety of electrical equipments
GB/T 5080.2-1986 Equipment reliability testing--Guidance for the design of test cycles
GB/T 25296-2010 Guidelines on general tests for safety of electrical equipments
GB 5080.2-1986 Equipment reliability testing - Guidance for the design of test cycles
GB/T 9414.7-2000 Guide on maintainability of equipment--Part 4:Diagnostic testing

工业和信息化部

YD/T 2898-2015 Parameters and test methods of energy dfficiency for optical transport equipment——Packet transport network(PTN)equipment
YD/T 2897-2015 Parameters and test methods for the energy efficiency—-—Optical transport network(OTN)equipment
QB/T 5429-2019 Test method of multi point of thermal conductivity for shoes(boots)
YS/T 443-2022 Guidelines for equipping of inspection, measurement and test equipments for copper processing enterprises
YD/T 3404-2018 Test methods of packet enhanced optical transport network equipment

Professional Standard - Post and Telecommunication

YD 5091.2-2014 Specification for Seismic Test of Transmission EquipmentPart2 Satellite Earth Station Transmission Equipment
YD/T 2487-2013 Packet Transport Network (PTN) Equipment Test Methods
YD/T 2899-2015 Parameters and test methodsof energyefficiencyfor optical transport equipmentMulti-Service transport platform(MSTP)equipment
YD 5091.1-2015 Specification for Seismic Test of Transmission Equipment Part l:Optical Transmission Equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 18487.2-2017 Electric Vehicle Conductive Charging System Part 2: EMC Requirements for Off-board Electric Vehicle Supply Equipment
GB/T 34657.1-2017 Interoperability test specifications of electric vehicle conductive charging - Part 1: Supply equipment

Professional Standard - Aerospace

QJ 1363-1988 Specification for type test of missile ground equipment
QJ 2436-1993 Specifications for final assembly and testing of equipment onboard missiles
QJ 1448-1988 雷达
QJ 20009-2011 Performance requirements and test methods for REIC of GNSS receiver
QJ 2170-1991 General specification for tactical missile trigger fuze test equipment
QJ 3156-2002 Stress test method for large structure of missile ground equipment

Military Standard of the People's Republic of China-General Armament Department

GJB 5775-2006 General specification for airborne equipment of command-transmitting system of air-to-ground missile
GJB 6860-2009 General specification for automatic test equipments of land-based cruise missile
GJB 2696-1996 Interface of Ground-base TT&C equipment for missile and spacecraft flight mission
GJB 6771-2009 TT&C equipments digital leading calculating method for missile and spacecraft flight mission
GJB 4867-2003 General Specification for Lx Band Command and Guidance Data Transmission Airborne Equipment
GJB 5014-2001 General specifications for unit test equipment for ballistic strategic missiles
GJB 1306-1991 General Specification for Strategic Missile Test Launch Control System Equipment
GJB 4295A-2017 Code naming method for missile and spacecraft test site measurement and control equipment
GJB 4047-2000 General specifications for ballistic missile conventional warhead assembly testing and launch test equipment
GJB 6537-2008 General specification for airborne equipment of video-transmitting systemof air-to-ground missile
GJB 1701-1993 General Specification for Tactical Missile Test Equipment
GJB 3972-2000 General specifications for comprehensive test equipment for air-to-air missiles
GJB 1701-1993(XG1-2015) General Specification for Tactical Missile Test Equipment
GJB 8010-2013 General specification for test equipments of safety self-destruction system of ground-to-ground missile
GJB 4045-2000 General Specifications for Integrated Test Equipment for Opposite Tactical Missiles
GJB 4295-2001 Code naming method for measurement and control equipment at missile and spacecraft test sites
GJB 8003-2013 General specification for missile-borne equipment of video-transmitting system of air-to-ground missile

Group Standards of the People's Republic of China

T/ZZB Q041-2022 Mixed signal semiconductor device test equipment
T/CEC 713-2022 Guidelines for equipment performance testing of district cooling stations
T/CEC 611-2022 Technical Guidelines for Acoustic Imaging Testing of Substation Equipment
T/ZACA 041-2022 Mixed signal semiconductor device test equipment

Taiwan Provincial Standard of the People's Republic of China

CNS 14320-1999 Digital test patterns for performance measurements on digital transmission equipment
CNS 29-1947 Transmission Equipment (Transmission Pulley)
CNS 13306-1-2-2007 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

Professional Standard - Non-ferrous Metal

YS/T 443-2001 Copper processing enterprise inspection, measuring and test equipment

Professional Standard - Navy

HJB 300.5-2004 Nuclear submarine missile weapon system repair technical standard JL-1 missile comprehensive test equipment
HJB 249.8-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203B 60TS General inspection platform for homing system
HJB 369.5-2006 Submarine Strategic Missile Equipment Quality Monitoring Requirements Part 5: JL-1 Missile Test Equipment
HJB 300.3-2004 Nuclear submarine missile weapon system repair technical standard JL-1 missile safety test equipment
HJB 365-2006 Metrological Verification Requirements for Submarine Strategic Missile Ground Test Equipment
HJB 249.9-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203B 626TS1 Homing transmitter test bench
HJB 249.7-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203.626TS2 Special power supply for homing transmitters
HJB 249.13-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203.624TS Self-guided related inspection tables
HJB 249.16-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203B 625TS Self-guided instruction inspection table
HJB 249.18-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203B 62TS3 Homing system receiving component testing platform

未注明发布机构

SAE J3068/1-2023 Identification of Vehicles and Supply Equipment for Conductive AC Charging

Professional Standard - Electricity

DL/T 907-2004 Guide for infrared inspection of thermal power equipments
DL/T 907―2004 Guidelines for Infrared Detection of Thermal Equipment
DL/T 2231-2021 Guide for frequency domain dielectric spectrum test of Oil-paper insulation power apparatus
DL/T 1681-2016 High voltage test equipment matching guidelines

Professional Standard - Machinery

JB/T 4219-1999 Type Designation of Measuring Equipments for Power Semiconductor Devices
JB/T 12154-2015 Electrical equipment and system of industrial mechines-Testing method of immunity to conducted disturbances,induced by radio-frequency fields

Professional Standard - Aviation

HB 6167.20-1989 Environmental conditions and test methods for airborne equipment of civil aircraft

Professional Standard - Commodity Inspection

SN/T 3697-2013 Method for inspection during AC line conducted emssion of test system

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 1306A-2005 General specification for equipments of test and firing control system of strategic missiles

British Standards Institution (BSI)

BS IEC 60747-14-3:2009 Semiconductor devices - Semiconductor sensors - Pressure sensors
BS EN 61788-22-1:2017 Superconductivity. Superconducting electronic devices. Generic specification for sensors and detectors
BS EN 60512-25-4:2001 Connectors for electronic equipment. Test and measurements. Test 25d. Propagation delay
BS EN 1474-2:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Design and testing of transfer hoses
BS ISO 18211:2016 Non-destructive testing. Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation
BS EN 60695-11-5:2017 Fire hazard testing. Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance
PD CEN/CLC/TR 17603-31-04:2021 Space Engineering. Thermal design handbook. Conductive Heat Transfer
BS EN 60512-23-4:2001 Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23d. Transmission line reflections in the time domain
BS EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices - Thin film standard test piece for tensile testing
BS EN IEC 60749-28:2022 Semiconductor devices. Mechanical and climatic test methods. Electrostatic discharge (ESD) sensitivity testing. Charged device model (CDM). device level
BS EN ISO 15839:2006 Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests
BS EN 60645-5:2005 Electroacoustics - Audiometric equipment - Instruments for the measurement of aural acoustic impedance/admittance
BS EN 60695-11-2:2017 Fire hazard testing. Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance
BS EN 55016-1-2:2014 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Coupling devices for conducted disturbance measurements
BS EN IEC 61108-5:2020 Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS) - BeiDou navigation satellite system (BDS). Receiver equipment. Performance requirements, methods of testing and required test results
BS PD CEN/CLC/TR 17603-31-04:2021 Space Engineering. Thermal design handbook. Conductive Heat Transfer

United States Navy

NAVY MIL-T-19851 C-1971 TACTICAL AIR NAVIGATION (TACAN) EQUIPMENT, SHORT RANGE, TEST EQUIPMENT FOR
NAVY MIL-T-19851 C (1)-1971 TACTICAL AIR NAVIGATION (TACAN) EQUIPMENT, SHORT RANGE, TEST EQUIPMENT FOR
NAVY MIL-STD-287 A VALID NOTICE 1-1991 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN)
NAVY MIL-STD-287 A-1958 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN)
NAVY MIL-STD-287 A NOTICE 2-1997 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN)
NAVY MIL-T-24015 B-1970 TRANSMITTING SET, TELEMETRY DATA AN/AKT-21
NAVY MIL-T-24015 B NOTICE 1-1997 TRANSMITTING SET, TELEMETRY DATA AN/AKT-21
NAVY MIL-G-82445 (4)-1974 GUIDANCE CONTROL TEST SET MARK 443 MOD 1 (FOR TORPEDO MK 46 MOD 0 AND MOD 1)
NAVY MIL-G-82445-1966 GUIDANCE CONTROL TEST SET MARK 443 MOD 1 (FOR TORPEDO MK 46 MOD 0 AND MOD 1)

European Telecommunications Standards Institute (ETSI)

ETSI PRETS 300 017-1993 Terminal Equipment (TE); Test Procedures for Teletex
ETSI PRETS 300 017-1990 Terminal Equipment Test Procedures for Teletex (T/TE 07-05)
ETSI TR 138905 V 16.8.0,3GPP TR 38.905 Version 16. 5G - NR - Derivation of test points for radio transmission and reception User Equipment (UE) conformance test cases (3GPP TR 38.905 version 16.8.0 Release 16)
ETSI ETS 300 019- 2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation
ETSI ETS 300 019- 2-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction

International Telecommunication Union (ITU)

ITU-T Q.135-1989 Principles of Rapid Transmission Testing Equipment - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 1 pp
ITU-T O.201-2003 Q-factor test equipment to estimate the transmission performance of optical channels SERIES O: SPECIFICATIONS OF MEASURING EQUIPMENT Equipment for the measurement of optical channel parameters Study Group 4
ITU-T O.191-2000 Equipment to Measure the Cell Transfer Performance of ATM Connections - Series O: Specifications of Measuring Equipment; Equipment for the Measurement of Digital and Analogue/Digital Parameters Study Group 4; 72 pp
ITU-T O.22 SPANISH-1992 CCITT AUTOMATIC TRANSMISSION MEASURING AND SIGNALLING TESTING EQUIPMENT ATME No. 2
ITU-T O.22 FRENCH-1992 CCITT AUTOMATIC TRANSMISSION MEASURING AND SIGNALLING TESTING EQUIPMENT ATME No. 2
ITU-T Q.135-1988 Principles of rapid transmission testing equipment
ITU-T Q.164-1989 Test Equipment for Checking Equipment and Signals - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 2 pp
ITU-T O.201 FRENCH-2003 Q-factor test equipment to estimate the transmission performance of optical channels
ITU-T Q.331-1989 Test Equipment for Checking Equipment and Signals - Specifications of Signalling Systems R1 and R2 (Study Group XI) 3 pp

RU-GOST R

GOST 17638-1972 Facsimile devices. Reliability test methods
GOST 25218-1982 Facsimile apparatus 02FA test-table. Technical requirements
GOST R 51527-1999 Electromagnetic compatibility of technical equipment. Stabilized power supplies, d.c.output. Conducted electromagnetic interference. Limits and test methods
GOST R 54117-2010 The Global Navigation Satellite Systems. Maritime differential subsystems. Navigation receiver equipment. Performance standards, methods of testing and required test results
GOST 28264-1989 Test documents FS1, FS2, FS3 for facsimile apparatus. Specifications
GOST 28265-1989 Test documents MK1, MK2, MK3 for facsimile apparatus. Specifications
GOST 28751-1990 Electrical equipment for vehicles. Electromagnetic compatibility. Electrical disturbance by conduction along supply lines. Technical requirements and tests
GOST 28266-1989 Test documents MPS, RPS, CHRT, SP for facsimile apparatus. Specifications
GOST R 51317.4.16-2000 Electromagnetic compatibility of technical equipment. Immunity to conducted disturbances in the frequency range 0 Hz to 150 kHz. Requirement and test methods
GOST R 57370-2016 Global navigation satellite system. Geodesic user navigation equipment. General requirements and test methods
GOST R 51317.2.4-2000 Electromagnetic compatibility of technical equipment. Electromagnetic environment. Compatibility levels for low-frequency conducted disturbances in industrial plants

Korean Agency for Technology and Standards (KATS)

KS C 0243-2016 Environmental testing Part 2：Tests－Test Ec： Drop and topple, primarily for equipment－type specimens
KS A 4904-2022 Test charts for modulation transfer function of X-ray equipment
KS A 4904-2007(2022) Test charts for modulation transfer function of X-ray equipment
KS A 4904-2007(2017) Test charts for modulation transfer function of X-ray equipment
KS C IEC 60512-25-4-2014 Connectors for electronic equipment－Tests and measurements－Part 25－4：Test 25d－Propagation delay
KS C IEC 60512-3:2014 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 3：Current－carrying capacity tests
KS J 0013-2006(2016) Biotechnology - equipment Guidance on testing procedures for leaktightness
KS C IEC 60512-3:2002 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 3:Current-carrying capacity tests
KS C CISPR 16-1-2-2017 Specification for radio disturbance and immunity measuring apparatus and methods－Part 1-2：Radio disturbance and immunity measuring apparatus－Ancillary equipment－Conducted disturbances
KS C 6565-2002 Test methods of semiconductor acceleration sensors
KS C 6565-2002(2017) Test methods of semiconductor acceleration sensors

CZ-CSN

CSN 35 8749-1973 Semiconductor devices. Transistors. Measurement of absolute value of short-circuit forward transfer admittance
CSN IEC 749:1994 Semiconductor devices.Mechanical and climatic test methods
CSN 50 0450-1987 Condenser páper. Determination of the number of conducting paths
CSN 72 7303-1987 Thermal insulation products from inorga- nic fibres. Methods of testing
CSN 72 7302-1987 Thermal insulation materials from inorganic fibres. Methods of testing
CSN 35 8754-1973 Semiconductor devices. Transistors. Measurement of short-circuit output admittance
CSN 35 8746-1973 Semiconductor devices. Transistore. Measurement of absolute value of forward current transfer ratio and frequencies fT, fh21b, fh21e

American Society for Testing and Materials (ASTM)

ASTM C1114-06 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM C1114-06(2013) Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM C1114-00 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM C177-13 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C177-10 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C182-88(2004) Standard Test Method for Thermal Conductivity of Insulating Firebrick

GSO

GSO IEC 61992-6:2014 Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies
BH GSO IEC 61788-22-1:2022 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors
GSO IEC 61788-22-1:2021 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors
GSO IEC 60333:2009 Nuclear instrumentation - Semiconductor charged-particle detectors - Test procedures
BH GSO IEC 60512-25-4:2016 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
GSO ISO 13261-2:2013 102Sound power rating of air-conditioning and air-source heat pump equipment -- Part 2: Non-ducted indoor equipment
GSO IEC 60512-25-4:2015 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
OS GSO IEC 60512-25-4:2015 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
GSO ISO 15839:2013 Water quality -- On-line sensors/analysing equipment for water -- Specifications and performance tests
GSO IEC 61108-2:2014 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results
GSO IEC 61301:2015 Nuclear instrumentation - Digital bus for NIM instruments

TR-TSE

TS 388-1977 Determination of Thermal Coadnctivity By a Plate Testing Apparatus

SCC

CEI EN 61788-22-1:2018 Superconductivity Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors
DANSK DS/EN 61788-22-1:2017 Superconductivity – Part 22-1: Superconducting electronic devices – Generic specification for sensors and detectors
CSA C108.5.4-1975 Tolerable Limits and Methods of Measurement of Line Conducted Interference from Low Voltage Apparatus 0.49MHz - 30MHz
ETSI TR 138 905:2021 5G; NR; Derivation of test points for radio transmission and reception User Equipment (UE) conformance test cases (3GPP TR 38.905 version 16.6.0 Release 16)
AS/NZS CISPR 16.1.2:2012 Specification for radio disturbance and immunity measuring apparatus and methods, Part 1.2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
AS/NZS CISPR 16.1.2:2004 (2ND EDITION) Specification for radio disturbance and immunity measuring apparatus and methods, Part 1.2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
DANSK DS/EN 60512-25-4:2001 Connectors for electronic equipment - Testing and measurements - Part 25-4: Test 25d - Propagation delay
CEI EN 60512-25-4:2003 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
BS EN 60945:1996 Marine navigation equipment. General requirements. Methods of testing and required test results
BS EN 60519-3:1996 Safety in electroheat installations-Particular requirements for induction and conduction heating and induction melting installations
CAN/CSA-CISPR 16-1-2-10:2010 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
CISPR 16-1-2:2003 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
CEI CLC/TR 50579:2013 Electricity metering equipment - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz -150 kHz
ESD STM5.5.1-2022 Electrostatic Discharge Sensitivity Testing--Transmission Line Pulse (TLP)--Device Level
DIN EN 61788-22-1 E:2016 Draft Document - Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors (IEC 90/356/CD:2015)
AS/NZS CISPR 16.1.2:2004 Specification for radio disturbance and immunity measuring apparatus and methods, Part 1.2: Radio disturbance and immunity measuring apparatus - Conducted disturbances
DIN EN 55016-2-1/A2 E:2012 Draft Document - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements - Transfer of AAN requirements and general conducted ...
DANSK DS/ISO 22248:2024 Lasers and laser-related equipment – Test methods for laser-induced damage threshold – Classification of medical beam delivery systems
DANSK DS/EN ISO 15839:2006 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
BS PD CLC/TR 50579:2012 Electricity metering equipment (A.C.). Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz-150 kHz
UNE-EN 55016-1-2:2007 Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances (CISPR 16-1-2:2003).
BS 490-11-11.4:1990 Conveyor and elevator belting. Methods of test for safety-Determination of electrical conductivity
DANSK DS/CLC/TR 50579:2012 Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz

VDI - Verein Deutscher Ingenieure

VDI/VDE/DGQ 2618 Blatt 19.1-2013 Inspection of measuring and test equipment - Test instruction for special gauges and test equipment
VDI/VDE/DGQ 2618 BLATT 4.6-2012 Inspection of measuring and test equipment - Test instruction for test cylinders and test mandrels

Association Francaise de Normalisation

NF EN 60332-1-1:2005 Tests of electrical and fiber optic cables subjected to fire - Part 1-1: vertical flame propagation test on insulated conductor or cable - Test equipment
NF EN 60332-1-1/A1:2015 Tests of electrical and fiber optic cables subjected to fire - Part 1-1: vertical flame propagation test on insulated conductor or cable - Test equipment
NF Z82-280*NF ETS 300280:1995 Terminal equipment (te). Facsimile group 4, class 1 equipment on the integrated services digital network (ISDN). Terminal testing.
NF C91-016-1-2/A2:2007 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2 : radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances.
NF J76-103*NF EN 14744:2005 Inland navigation vessels and sea-going vessels - Navigation light
NF EN 60512-25-4:2002 Connectors for electronic equipment - Tests and measurements - Part 25-4: test 25d - Propagation delay
NF C63-244-1*NF EN IEC 63244-1:2021 Semiconductor devices - Semiconductor devices for wireless power transfer and charging - Part 1 : general requirements and specifications
NF C91-016-1-2:2005 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2 : radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances.
NF C91-016-1-2/A1:2005 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2 : radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances.
NF EN ISO 15839:2006 Water quality - Direct water analysis equipment/sensors - Specifications and performance testing
NF S31-083-1:1999 Acoustics. Audiometric test methods. Part 1 : basic pure tone air and bone conduction threshold audiometry.
NF Z81-242*NF ETS 300242:1994 Terminal equipment (te). Group 3 facsimile equipment.

AT-ON

ONORM EN 27566-1991 Acoustics - Standard reference zero for the c?libration of pure-tone bone conduction audiometers
OENORM EN 1474-2-2021 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
ONORM Z 1560-1983 Driving-in-appliances (homing-rams); requirements, testing, marking of conformity
ONORM M 9610-1989 Permanently guided stacking equipments; rules for design, testing, use and maintenance
ONORM M 1349-1997 Verification of measuring and test equipment - Testing Instruction for measuring tapes

Society of Automotive Engineers (SAE)

SAE J2570-2001 Performance Specifications for Anthropomorphic Test Device Transducers

PL-PKN

PN-EN 61788-22-1-2018-03 P Superconductivity -- Part 22-1: Superconducting electronic devices -- Generic specification for sensors and detectors
PN M73501-1971 Hydraulic drive and control equipment Tanks General requiments and test
PN T04901-1974 Mierowave e?uipment Sealing test for waveguide tubing

European Committee for Electrotechnical Standardization（CENELEC）

EN 61788-22-1:2017 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors
EN IEC 63244-1:2021 Semiconductor devices - Semiconductor devices for wireless power transfer and charging - Part 1: General requirements and specifications
EN IEC 60749-10:2022 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - Device and subassembly

SAE - SAE International

SAE J2570-2019 Performance Specifications for Anthropomorphic Test Device Transducers

ES-UNE

UNE-EN 61788-22-1:2017 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-CLC/TR 50579:2012 Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz (Endorsed by AENOR in November of 2012.)

American National Standards Institute （ANSI)

ANSI/VITA 30.1-2008 2mm Equipment Practice for Conduction Cooled Eurocard

IX-ICAO

ICAO 8071-2-2007 Manual on Testing of Radio Navigation Aids - Volume II: Testing of Satellite-based Radio Navigation Systems
ICAO 8071-1-2000 Manual on Testing of Radio Navigation Aids - Volume I: Testing of Ground-based Radio Navigation Systems
ICAO 8071-2 CORR-2008 Manual on Testing of Radio Navigation Aids - Volume II: Testing of Satellite-based Radio Navigation Systems; Corrigendum
ICAO 8071-3-1998 Manual on Testing of Radio Navigation Aids - Volume III: Testing of Surveillance Radar Systems

SE-SIS

SIS SS-IEC 749:1991 Semiconductor devices - Mechanical and climatic test methods
SIS SS-IEC 945:1991 Manne navigational equipment - General requirements - Methods of testing and required test results
SIS SS-IEC 747:1991 Semiconductor devices — Discrete devices

Danish Standards Foundation

DS 5103:1987 Immunity of electrical equipment against conducted transients
DS/EN 1474-1:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
DS/EN 1474-2:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
DS/EN 60512-25-4:2002 Connectors for electronic equipment - Testing and measurements - Part 25-4: Test 25d - Propagation delay
DS/EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method
DS/ISO 8253-1:1991 Acoustics. Audiometric test methods. Part 1: Basic pure tone air and bone conduction threshold audiometry
DS/EN 55016-1-2/A2:2007 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
DS/ETS 300280:1994 Terminal Equipment (TE) - Facsimile group 4 class 1 equipment on the Integrated Services Digital Network (ISDN) - Terminal testing
DS/EN 55016-1-2:2005 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
DS/ETS 300280/A1:1997 Terminal Equipment (TE) - Facsimile group 4 class 1 equipment on the Integrated Services Digital Network (ISDN) - Terminal testing
DS/CLC/TR 50579:2012 Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0404-4-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 4: Handheld and manually operated current clamps/sensors for measurement of protectives conductor currents and touch currents of electrical devices
VDE 0390-22-1-2018 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors (IEC 61788-22-1:2017); German version EN 61788-22-1:2017
VDE 0390-22-1-2016 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors (IEC 90/356/CD:2015)
VDE 0418-9-2012 Electricity metering equipment - Severity levels@ immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz; German version CLC/FprTR 50579:2012

International Electrotechnical Commission (IEC)

IEC TS 62644:2012 Professional video storage equipment - Guideline of time code transmission
IEC 63244-1:2021 Semiconductor devices - Semiconductor devices for wireless power transfer and charging - Part 1: General requirements and specifications
CISPR 16-1-2 Edition 1.2-2006 Specification for radio disturbance and immunity measuring apparatus and methods.Part 1-2: Radio disturbance and immunity measuring apparatus – Ancillary equipment – Conducted disturbances

ATIS - Alliance for Telecommunications Industry Solutions

T1.319-1995 Telecommunications - Equipment Assemblies - Fire Propagation Hazard Testing Procedure

Electronic Components, Assemblies and Materials Association

ECA CB 5-1969 Recommended Test Procedure for Semiconductor Thermal Dissipating Devices
ECA CB 5-1-1971 Recommended Test Procedure for Semiconductor Thermal Dissipating Devices Addendum to CB5

International Organization for Standardization (ISO)

ISO 18211:2016 Non-destructive testing - Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation

Lithuanian Standards Office

LST EN 1474-1-2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
LST EN 1474-2-2020 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
LST EN 1474-2-2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
LST ETS 300 280 Leid.1-2006 Terminal Equipment (TE);Facsimile group 4 class 1 equipment on the Integrated Services Digital Network (ISDN) Terminal testing
LST ETS 300 280 Leid.1-2006/A1-2006 Terminal Equipment (TE);Facsimile group 4 class 1 equipment on the Integrated Services Digital Network (ISDN) Terminal testing

RO-ASRO

STAS 6693/2-1975 Semiconductor devices TRANSISTORS Methods for measuring electrical properties

(U.S.) Ford Automotive Standards

FORD FLTM BI 128-1-2001 ELECTROSTATIC CONDUCTIVITY TEST FOR PLASTIC PARTS

IT-UNI

UNI EN 1474-2-2020 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
UNI 7885-1978 Glass test. Solar energy conductivity measurement

CH-SNV

SN EN 1474-2-2021 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses

AENOR

UNE-EN 1474-2:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
UNE-EN 60512-25-4:2002 Connectors for electronic equipment - Tests and measurements -- Part 25-4: Test 25d - Propagation delay.
UNE-EN 60068-3-3:1994 ENVIRONMENTAL TESTING. PART 3: GUIDANCE. SEISMIC TEST METHODS FOR EQUIPMENTS.
UNE 73350-1:2003 Procedure for the determination of ambient radioactivity. Measurement equipment. Part 1: Gamma spectrometry by semiconductor sensors.
UNE-ETS 300280:1999 TERMINAL EQUIPMENT (TE). FACSIMILE GROUP 4 CLASS I EQUIPMENT ON THE INTEGRATED SERVICES DIGITAL NETWORK (ISDN). TERMINAL TESTING.
UNE 73350-2:2003 Procedure for the determination of ambient radioactivity. Measurement equipment. Part 2: Alpha spectrometry by semiconductor sensors.

FI-SFS

SFS 5134-1985 Fire hazard testing of electrical equipment. Macroscopic guidance for specification preparation

German Institute for Standardization

DIN EN 14744:2006 Inland navigation vessels and sea-going vessels - Navigation light;English version of DIN EN 14744:2006
DIN EN 60512-25-4:2002-08 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d: Propagation delay (IEC 60512-25-4:2001); German version EN 60512-25-4:2001
DIN ETS 300280:1994-08 Terminal equipment (TE) - Facsimile group 4, class 1 equipment in the Integrated Services Digital Network (ISDN) - Terminal testing; English version ETS 300280:1994
DIN EN ISO 15839:2007-02 Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003); German version EN ISO 15839:2006
DIN EN ISO 22248:2024 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Classification of medical beam delivery systems (ISO 22248:2020); German and English version prEN ISO 22248:2024
DIN ETS 300280/A1:1996-10 Terminal Equipment (TE) - Facsimile group 4 class 1 equipment on the Integrated Services Digital Network (ISDN) - Terminal testing; English version ETS 300280:1994/A1:1996
DIN IEC 60068-3-3:1993 Environmental testing; seismic test methods for equipments; guidance; identical with IEC 60068-3-3:1991
DIN EN 61000-4-24:1997 Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques; Section 24: Test methods for protective devices for HEMP conducted disturbances; basic EMC Publication (IEC 61000-4-24:1997); German version EN 61000-4-24:1997

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T O.150-1992 Digital Test Patterns for Performance Measurements on Digital Transmission Equipment - Specifications of Measuring Equipment (Study Group IV; 8 pp)

GM North America

GM GM9115P-1993 Conducted Transient Emissions EMC - Component Test Procedure
GM GM9105P-1996 Immunity to Conducted Transients EMC - Component Test Procedure

HU-MSZT

MSZ 18286/2-1980 Energy conduction testing of building stones. Thermal conductivity detection Bock method
MSZ 21 459/4-1982 Air pollutant conduction detection. Conduction calculation database

Indonesia Standards

SNI CISPR 16-1-2-2011 Specifications for methods and equipment for measurement of immunity and radio interference Part 1-2: Equipment for measurement of immunity and radio interference Additional equipment Conducted interference
SNI 19-4197-1996 Measurement of water flow in close conduit - Meters for cold potable water - Part 3 : Equipment and test method

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD89A-2006 Measurement and Reporting of Alpha Particle and Terrestrial Cosmic Ray-Induced Soft Errors in Semiconductor Devices

U.S. Military Regulations and Norms

ARMY MIL-T-12681 A-1955 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A VALID NOTICE 1-1986 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A NOTICE 2-1997 TEST SET, TELEPHONE (TEST SET TS-190)(/U)

GOST

GOST 33473-2023 Global navigation satellite system. Satellite navigation equipment for mounting on wheeled vehicles. Functional test methods

ESD - ESD ASSOCIATION

STM5.5.1-2016 Electrostatic Discharge Sensitivity Testing – Transmission Line Pulse (TLP) – Device Level

ETSI - European Telecommunications Standards Institute

PRETS 300 280-1992 Terminal Equipment (TE); Facsimile Group 4 Class 1 Equipment on the Integrated Services Digital Network (ISDN) Terminal Testing

Aeronautical Radio Inc.

ARINC 738-3 ITEM 9.0-2001 Built-In Test Equipment (Bite)

Standard Association of Australia （SAA）

AS 4362.2:1996 High-voltage test techniques for low-voltage equipment - Test equipment

YU-JUS

JUS N.N6.135-1980 Radiocommunications. Receiving eguipment. Subjective tests on receivers for broadcast transmissions

American Bureau of Shipping

ABS 224-2016 GUIDANCE NOTES ON EQUIPMENT CONDITION MONITORING TECHNIQUES