Component Mobile Phase+

Component Mobile Phase+, Total:121 items.

The international standard classification for "Component Mobile Phase+" includes: Fuses and other overcurrent protection devices , Generating sets , Electrical equipment of ships and of marine structures .

The Chinese standard classification for "Component Mobile Phase+" includes: Power semiconductor device and parts , Lightning arrester , Generating unit , Electric control devices and measurement equipment for vessel .

National Health Commission of the People's Republic of China

GB 5009.202-2016 National Food Safety Standard - Determination of polar components (PC) in edible oils

Group Standards of the People's Republic of China

T/GDMA 18-2019 General technical specification for centralized winding AC single-phase motors

Professional Standard - Machinery

JB/T 10496-2005 Combination type metal-oxide surge arresters without gaps for the three-phase a.c.systems
JB/T 6812-1993 DDZ-Ⅱ series electric unit combined meter shunt
JB/T 11706.2-2015 Energy efficiency grade for typical load unit driven by three-phase motor -- Part 2:Energy efficiency grade of screw air compressor unit
JB/T 11706.1-2013 Energy Efficiency Grade for Typical Load Unit Driven by Three-phase Motor - Part1: Energy Efficiency Grade of Centrifugal Pump Unit for Fresh Water
JB/T 7821-1995 Avalanche Rectifier Diode and Accessories Intended to Be Used in Motor Vehicles - UB Series Bridge Avalanche Rectifier Assemblies Intended to Be Used in Motor Vehicles
JB/T 7560-1994 UDC Series Triphase High Voltage Rectifier Assemblies

Professional Standard - Railway

TB/T 3460-2016 Relief valve for railway passenger cars and EMUs
TB/T 3411-2015 Auxiliary convertor for electric multiple unit

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2820.5-2009 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
GB/T 2820.5-1997 Reciprocating internal combustion engine driven alternating current generating sets Part 5:Generating sets
GB/T 2820.3-1997 Reciprocating internal combustion engine driven alternating current generating sets Part 3:Alternating current generators for generating sets
GB/T 20996.3-2020 Performance of high-voltage direct current (HVDC) systems with line-commutated converters—Part 3:Dynamic conditions
GB/T 2820.3-2009 Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets
GB/T 2820.5-2025 Reciprocating internal combustion engine driven alternating current generating sets—Part 5：Generating sets

Professional Standard - Post and Telecommunication

YD/T 4378.2-2023 Coherent driver modulator subassembly -Part 2: 800Gb/s

未注明发布机构

FORD ESB-M4G316-A1-1989 SEALER, REPAIR, TWO COMPONENT - EPOXY BASE - HIGH FLOW

Professional Standard-Ships

CB 1004.3-1982 Electromagnetic Starter of Marine Service AC Motor Group Starter

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1760-2015 Electric vehicle 150A three-phase AC charging interface

International Organization for Standardization (ISO)

ISO 4399:2019 Fluid power systems and components — Connectors and associated components — Nominal pressures
ISO 4399:1977 Fluid power systems and components; Connectors and associated components; Nominal pressures
ISO 8528-3:2020 Reciprocating internal combustion engine driven alternating current generating sets — Part 3: Alternating current generators for generating sets
ISO 8528-3:2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets
ISO 5598:2019 Fluid power systems and components — Vocabulary
ISO 8528-5:2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
ISO/CD 8528-5:2023 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets
ISO 8528-5:2025 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets
ISO 8528-5:2022 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets
ISO 8528-5:2013 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
ISO 8528-5:2018 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets

Ente Nazionale Italiano di Unificazione

UNI ISO 4399:1989 Fluid power systems and components. Connectors and associate components. Nominal pressures.
UNI ISO 5598:2012 Fluid power systems and components - Vocabulary
EC 1-2016 UNI ISO 5598:2012 Fluid power systems and components - Vocabulary

Standards Norway

NS-ISO 4399:2019 Fluid power systems and components - Connectors and associated components - Nominal pressures
NS-ISO 4399:1995 Fluid power systems and components - Connectors and associated components - Nominal pressures
NS 5906:1985 Fluid power systems and components - Connectors and associated components - Nominal pressures
NS 5905:1985 Fluid power systems and components - Connectors and associated components - Outside diameters of tubes and inside diameters of hoses
NS 4170:2008 Flow of person-related information in education

British Standards Institution (BSI)

BS ISO 4399:2019 Fluid power systems and components. Connectors and associated components. Nominal pressures
BS 140:1923 Liquid starters for electric motors (d.c and a.c-phase 3 induction with slip rings)
BS 5267:1976 Specification. Capacitors for single phase a.c. motors
BS 7698-3:1993 Reciprocating internal combustion engine driven alternating current generating sets - Specification for alternating current generators for generating sets
19/30378151 DC BS ISO 6358-1 AMD1. Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Part 1. General rules and test methods for steady-state flow
BS 7698-5:1993 Reciprocating internal combustion engine driven alternating current generating sets - Specification for generating sets

Swedish Institute for Standards

SIS-ISO/TS 21354:2021 Measurement of multiphase fluid flow (ISO/TS 21354:2020)
SS-ISO 4399:2005 Fluid power systems and components - Connectors and associated components - Nominal pressures (ISO 4399:1995, IDT)
SIS-ISO/TR 10686:2013 Hydraulic fluid power - Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system (ISO/TR 10686:2013, IDT)

American Society for Testing and Materials (ASTM)

ASTM UOP846-83 Composition of C4 Olex Effluent by Gas Chromatography
ASTM F561-05a(2010) Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

Korean Agency for Technology and Standards (KATS)

KS B ISO 4399:2002 Fluid power systems and components-Connectors and associated components-Nominal pressure
KS B ISO 6072-2013 Hydraulic fluid power－Compatibility between elastomeric materials and fluids
KS R ISO 8528-5:2019 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets
KS R ISO 8528-5-2019 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets
KS R ISO 8528-5:2014 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets
KS C 4402-2003 Rectifiers for floating charge
KS R ISO 8528-5-2024 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets
KS R ISO 8528-5:2009 Reciprocating internal combustion engine driven alternating current generating sets-Part 5:Generating sets

National Association of Corrosion Engineers (NACE)

NACE Paper 00050-1998 Calculation of Liquid-Gas Flow and Mass Transfer in Multiphase Flow
NACE Paper 04068-2014 Study on flow pattern and water wettability in oil-water two-phase flow
NACE Paper 07408-2016 Hydrodynamic and Phase Wetting Criteria to Assess Corrosion Risk in Two-Phase Oil-Water Pipe Flow

Society of Automotive Engineers (SAE)

SAE J1536_202505 Two-Stroke-Cycle Engine Oil Fluidity/Miscibility Classification
SAE J2658_200307 Metallic Tube Conductor Assemblies for Fluid Power and General Use--Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

German Institute for Standardization

DIN ISO 8528-3:1997-11 Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets
DIN 14680:2007 Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN 14680:2007-05 Manual operation of cable reels for AC, three-phase AC, and DC
DIN 14680-2:1984 Hand-operated cable reels for a.c. and three-phase a.c.
DIN 24564-1:1995-08 Fluid power systems and components - Part 1: Characteristics
DIN 14680:2016 Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN 14680:2018 Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN EN 60909-3 Corrigendum 1:2014-02 Short-circuit currents in three-phase ac systems - Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth (IEC 60909-3:2009); German version EN 60909-3:2010, Corrigendum...
DIN 14680/A1 E:2017-09 Draft Document - Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN 14680/A1 E:2017 Draft Document - Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.
DIN EN ISO 8362-13 E:2014-09 Internal combustion engine driven alternating current generating sets Part 13: Safety
DIN ISO 3724:1990 Hydraulic fluid power; filter elements; verification of flow fatigue characteristics; identical with ISO 3724:1976

Standard Association of Australia （SAA）

AS 2788:1985 Fluid power - Pneumatic systems and components
AS C46:1927 Liquid starters for electric motors (D.C. and A.C. 3-phase induction with slip rings)

South African Bureau of Standard

SANS 1051-6:2006 Braking Part 6: Distribution of braking effort and compatibility of vehicles in combination
SANS 8528-3:1993 Reciprocating internal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets
NRS 024-2-1994 Diesel alternator sets Part 2: Mobile or trailer-mounted diesel alternator sets - Preferred requirements for applications in their organizations by the DC and standby equipment representative user group
SANS 8528-3:2008 Reciprocating internal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets
SANS 8528-5:1993 Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets
SANS 8528-5:2008 Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets

Association Francaise de Normalisation

NF ISO 6358-3:2015 Pneumatic transmissions - Determination of the flow characteristics of components crossed by a compressible fluid - Part 3: method of calculating stationary flow characteristics of assemblies
NF ISO 8528-3:2021 Alternating current generating sets driven by reciprocating internal combustion engines - Part 3: Alternators for generating sets
NF E37-303*NF ISO 8528-3:2021 Reciprocating internal combustion engine driven alternating current generating sets - Part 3 : alternating current generators for generating sets
NF E37-303:2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 3 : alternating current generators for generating sets.
NF E37-303:1994 Reciprocating internal combustion engine driven alternating current generating. Part 3 : alternating current generators for generating sets.
NF E37-305*NF ISO 8528-5:2025 Reciprocating internal combustion engine driven alternating current generating sets - Part 5 : generating sets
NF T60-232:2019 Animal and vegetable fats and oils - Determination of composition of the sterol fraction - Method by gas chromatography
NF ISO 5784-3:1990 Hydraulic and pneumatic transmissions - Fluid logic - Part 3: Symbols for sequential operators and related functions
NF E37-305:2013 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: generating sets
NF E37-305*NF ISO 8528-5:2022 Reciprocating internal combustion engine driven alternating current generating sets - Part 5 : generating sets
NF E48-000*NF ISO 5598:2020 Fluid power systems and components - Vocabulary
XP E48-078-2*XP ISO/TS 17165-2:2019 Hydraulic fluid power - Hose assemblies - Part 2 : practices for hydraulic hose assemblies
NF ISO 8528-5:2025 Reciprocating internal combustion engine driven alternating current generating sets - Part 5 : generating sets
NF E37-302:1994 Reciprocating internal combustion engine driven alternating current generating sets. Part 2 : engines.
NF ISO 8528-5:2022 Alternating current generating sets driven by reciprocating internal combustion engines - Part 5: Generating sets
NF E37-305:1994 Reciprocating internal combustion engine driven alternating current generating setts. Part 5 : generating sets.

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0664-40 1 E*DIN EN 62423 1:2008-06 Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs)

Gosstandart of Russia

GOST R ISO 8528-3-2005 Reciprocating internal combustion engine driven alternating current generating sets. Part 3. Alternating current generators for generating sets
GOST ISO 8528-3-2011 Reciprocating internal combustion engine driven alternating current generating sets. Part 3. Alternating current generators for generating sets
GOST R ISO 8528-5-2005 Reciprocating internal combustion engine driven alternating current generating sets. Part 5. Generating sets
GOST ISO 8528-5-2011 Reciprocating internal combustion engine driven alternating current generating sets. Part 5. Generating sets
GOST ISO 8528-5-2017 Reciprocating internal combustion engine driven alternating current generating sets. Part 5. Generating sets

Indonesia Standards

SNI 19-1611-1989 Lambang grafis - Komponen dan sistem instalasi aliran fluida
SNI 04-6919.3-2002 Konverter daya untuk traksi listrik - Bagian 3: Konverter berkomutasi sendiri untuk traksi fase-satu

Bureau of Indian Standards

IS 722 Pt.3-1977 Specification for alternating current meters Part III Three-phase full-current and transformer-driven and single-phase transformer-driven power meters Class 2
IS/ISO 8528-3-2020 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 3 Alternating Current Generators for Generating Sets
IS 722 Pt.9-1972 Specification for alternating current meters Part IX Three-phase full current and transformer-driven wattmeters and single-phase two-wire transformer-driven wattmeters (Class 1.0)
IS/ISO 8528-5-2022 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 5 Generating Sets
IS 996-2009 Single-phase a.c. industrial motors for general purpose

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 8528-3:2013 Reciprocating internal combustion engine driven alternating current generating sets -- Part 3: Alternating current generators for generating sets
OS GSO ISO 8528-5:2013 Reciprocating internal combustion engine driven alternating current generating sets -- Part 5: Generating sets

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO/TS 17165-2:2017 Hydraulic fluid power -- Hose assemblies -- Part 2: Practices for hydraulic hose assemblies
BH GSO ISO 5598:2017 Fluid power systems and components -- Vocabulary

Japanese Industrial Standards Committee (JISC)

JIS B 0142:2011 Fluid power systems and components -- Vocabulary

U.S. Military Regulations and Norms

ARMY MIL-PRF-62331 A-1997 PUMP ASSEMBLY, BILGE, ELECTRIC MOTOR DRIVEN, DIRECT CURRENT

Lithuanian Standards Office

LST ISO 8528-1:2006 Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performanc (identical ISO 8528-1:2005)

GCC Standardization Organization

GSO ISO 8528-3:2013 Reciprocating internal combustion engine driven alternating current generating sets -- Part 3: Alternating current generators for generating sets
GSO ISO 8124-10:2024 Safety of toys — Part 10: Experimental sets for chemistry and related activities