Normal phase system resolution

Normal phase system resolution, Total:170 items.

The international standard classification for "Normal phase system resolution" includes: Installations and equipment for waste disposal and treatment , Photographic equipment. Projectors , Refrigerating technology , Optical equipment , Particle size analysis. sieving , Electromagnetic compatibility in general , Volumetric equipment and measurements , Powder metallurgy , Essential oils , Road transport , Laboratory medicine .

The Chinese standard classification for "Normal phase system resolution" includes: Environmental protection equipment , Lens , Refrigeration equipment , Magnifier and microscope , Sieving, Sieve Plate and Sieve Screen , Electromagnetic compatibility , Oil and gas gathering and transportation equipment , Metal physical property test method , Fragrances and flavors , Transportation material consumption and energy conservation , Astronomical instrument , Medical apparatus and devices in general .

Professional Standard - Machinery

JB/T 8470-2010 Positive pressure dense pneumatic ash conveying system
JB/T 8470-1996 Positive pressure dense phase pneumatic transportation system
JB/T 8247.1-1999 Photographic distance scale markings of photographic lenses
JB/T 11210-2011 Accumulator for air-conditioning system

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 44330-2024 Lithium-ion battery cathode materials—Determination of powder compaction density
GB/T 42342.2-2023 Determination of particle size distribution—Centrifugal liquid sedimentation methods—Part 2: Photocentrifuge method
GB/Z 17624.7-2023 Electromagnetic compatibility—General—Part 7: Power factor in single-phase systems under non-sinusoidal conditions
GB/T 17290-1998 Petroleum measurement systems--Calibration--Temperature corrections for use with volumetric reference measuring systems
GB/T 11540-1989 Isolate and synthetic aroma chemicals--Determination of relative density
GB/T 22057.2-2008 Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems

未注明发布机构

ASTM RR-D02-1748 2012 D7061-Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
GJB 841-1990 Failure reporting, analysis and corrective action system

Military Standard of the People's Republic of China-General Armament Department

GJB 3090-1997 Radar feeder subsystem performance test method power distribution ratio, isolation, air tightness
GJB/Z 75-1995 Correction method for ionospheric refraction error of external ballistic measurement system

交通运输部

JT/T 1229-2018 Intelligent transport systems- Technology requirements of long distance and single-phase power supply and distribution system

Professional Standard - Electron

SJ 20920-2005 General specification for the ionospheric refraction correction system for exterior ballistic measurement by differential Doppler

Group Standards of the People's Republic of China

T/QGCML 2294-2023 Highly efficient concrete residue separation system
T/CASMES 75-2022 Battery conditioning (charging and discharging) systems
T/CIET 618-2024 Water electrolysis hydrogen production gas separation system
T/CAME 53-2022 Automatic fecal bacteria washing and separation system
T/CI 262-2023 Three-phase separator

国家药监局

YY/T 1789.2-2021 In vitro diagnostic test systems-Performance evaluation method-Part 2:Trueness

Professional Standard - Aerospace

QJ 2719.3-1995 General Specifications for Separation System of Ground-to-Surface Ballistic Missile and Launch Vehicle
QJ 2719.2-1995 General specification for ground-to-surface ballistic missile and launch vehicle separation system fairing separation system
QJ 2719.1-1995 General specification for ground-to-ground ballistic missile and launch vehicle separation system head body, interstage and booster separation system

工业和信息化部

YD/T 2932-2015 Technical requirements for deep packet inspection system based on separation architecture - Interface function
YD/T 2933-2015 Technical requirements for deep packet inspection system based on separation architecture Comprehensive analysis platform

Professional Standard - Energy

NB/SH/T 0902-2015 Standard test method for measuring n-heptane induced phase separation of asphaltene-containing heavy fuel oil as separability number by an optical scanning device

Japanese Industrial Standards Committee (JISC)

JIS B 7132-2:2009 Microscopes -- Imaging distances related to mechanical reference planes -- Part 2: Infinity-corrected optical systems
JIS B 7132-2:2022 Microscopes -- Imaging distances related to mechanical reference planes -- Part 2: Infinity-corrected optical systems
JIS Z 8823-2:2016 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method
JIS Z 8823-2:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method
JIS K 0163:2010 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials
JIS K 0158:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
JIS B 7105:1975 Method for marking distance scales of photographic lenses

International Organization for Standardization (ISO)

ISO 9345-2:2014 Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems
ISO 16679:2015 Space systems - Relative motion analysis elements after LV/SC separation
ISO 5479:1997 Statistical interpretation of data - Tests for departure from the normal distribution
ISO 13318-2:2007 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method
ISO 13318-2:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method
ISO 17361:2017/PRF Amd 1: Intelligent transport systems — Lane departure warning systems — Performance requirements and test procedures — Amendment 1
ISO 18114:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
ISO 17361:2017/DAmd 1 Intelligent transport systems — Lane departure warning systems — Performance requirements and test procedures — Amendment 1
ISO 18114:2021 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
ISO 20411:2018 Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
ISO 6516:1980 Photography; Photographic lenses; Distance scale markings
ISO 9345:2019 Microscopes — Imaging distances related to mechanical reference planes — Part 2: Infinity-corrected optical systems
ISO 18242:2016/DAmd 1 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps — Amendment 1: Worst-case conditions for testing
ISO 16531:2013 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS

British Standards Institution (BSI)

BS ISO 9345-2:2014 Microscopes. Imaging distances related to mechanical reference planes. Infinity-corrected optical systems
BS ISO 16679:2015 Space systems. Relative motion analysis elements after LV/SC separation
BS EN 15843:2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
BS ISO 20411:2018 Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
BS 2846-7:1997 Guide to statistical interpretation of data. Tests for departure from normality
BS ISO 9276-5:2005 Representation of results of particle size analysis - Methods of calculation relating to particle size analyses using logarithmic normal probability distribution

SE-SIS

SIS SMS-187-1928 Detachable handle, metric thread system (SI)

GSO

BH GSO ISO 9345-2:2016 Microscopes -- Imaging distances related to mechanical reference planes -- Part 2: Infinity-corrected optical systems
BH GSO ISO 16679:2022 Space systems — Relative motion analysis elements after LV/SC separation
GSO ISO 16679:2021 Space systems — Relative motion analysis elements after LV/SC separation
GSO ISO 5479:2015 Statistical interpretation of data -- Tests for departure from the normal distribution
BH GSO ISO 5479:2016 Statistical interpretation of data -- Tests for departure from the normal distribution
OS GSO ISO 5479:2015 Statistical interpretation of data -- Tests for departure from the normal distribution
GSO ISO 3924:2013 Petroleum products - Determination of boiling range distribution - Gas chromatography method
GSO ISO 18114:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials
GSO IEC TR 61000-1-7:2021 Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions
BH GSO IEC TR 61000-1-7:2022 Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions
BH GSO ISO 23830:2016 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
OS GSO ISO 23830:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
GSO ISO 23830:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry

Natural Gas Processor's Association (NGPA)

GPA RR-19-1976 Vapor Phase Data for the Binary Systems of Methane with n-Butane, n-Pentane, n-Hexane, and n-Heptane
GPA RR-55-1981 Phase Equilibrium Studies for Methane/Synthesis Gas Separation: the Hydrogen-Carbon Monoxide-Methane System
GPA RR-148-1995 Volume Correction Factors for Natural Gas Liquids Phase II

US-AAMI

ANSI/AAMI/ISO 13408-6:2005/A1:2013 Aseptic processing of health care products - Part 6:Isolator systems - Amendment 1

Korean Agency for Technology and Standards (KATS)

KS Q ISO 5479-2009(2019) Statistical interpretation of data－Tests for departure from the normal distribution
KS Q ISO 5479-2019 Statistical interpretation of data－Tests for departure from the normal distribution
KS Q ISO 5479:2009 Statistical interpretation of data－Tests for departure from the normal distribution
KS D ISO 18114:2005 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials
KS M ISO 8222:2003 Petroleum measurement systems-Calibration-Temperature corrections for use when calibrating volumetric proving tanks
KS M ISO 8222:2013 Petroleum measurement systems－Calibration－Temperature corrections for use when calibrating volumetric proving tanks
KS B 5424-1988 Method for marking distance scales of photographic lenses
KS B 5424-2013 Method for marking distance scales of photographic lenses

German Institute for Standardization

DIN ETS 300731:2000 Television systems - Enhanced 625-line Phased Alternative Line (PAL) television - PALplus (Endorsement of the English version ETS 300731:1997 as German standard)
DIN ISO 5479:2004 Statistical interpretation of data - Tests for departure from the normal distribution (ISO 5479:1997)
DIN 58970-2:1982 Laboratory centrifuges; centrifuge tubes for relative centrifugal acceleration up to 4000
DIN EN 1366-11:2022 Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components (includes Amendment A1:2021)
DIN EN 15089:2009-07 Explosion isolation systems; German version EN 15089:2009
DIN EN 16932-2:2018-07 Drain and sewer systems outside buildings - Pumping systems - Part 2: Positive pressure systems; German version EN 16932-2:2018
DIN EN ISO 8222:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002); German version EN ISO 8222:2002
DIN EN 16932-2:2018 Drain and sewer systems outside buildings - Pumping systems - Part 2: Positive pressure systems

API - American Petroleum Institute

API PUBL 4474-1988 Phase Separated Hydrocarbon Contaminant Modeling for Corrective Action
API MPMS 11.1 VOL IV-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IV Table 23A - Generalized Crude Oils Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24A - Generalized Crude Oils Correction of Vo
API MPMS 11.1 VOL V-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume V Table 23B - Generalized Products Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24B - Generalized Products Correction of Volume

Association Francaise de Normalisation

NF S98-117-6/A1:2013 Aseptic processing of health care products - Part 6: isolator systems - Amendment 1
NF X45-600:1992 liquid - solid separation - Specifications for defining liquid-solid separating equipment
NF T90-396*NF EN 15843:2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
NF M08-005:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks.
NF EN 61858-1:2014 Systèmes d'isolation électrique - Évaluation thermique des modifications apportées à un système d'isolation électrique éprouvé - Partie 1 : système d'isolation électrique (SIE) à enroulements à fils
NF M01-018*NF ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
NF EN 60034-18-22:2001 Rotating electrical machines - Part 18-22: functional assessment of insulation systems - Test procedures for wire winding - Classification of modifications and substitutions of insulation components
NF S66-406*NF EN 15089:2009 Explosion isolation systems
NF EN 15089:2009 Systèmes d'isolement d'explosion
NF ISO 23830:2009 Chemical analysis of surfaces - Mass spectrometry of secondary ions - Repeatability and constancy of the scale of relative intensities in static mass spectrometry of secondary ions

SCC

DANSK DS/ISO 5479:2004 Statistical interpretation of data - Tests for departure from the normal distribution
11/30217195 DC BS ISO 15923-1. Water quality. Determination of ions by a discrete analysis system and spectrophotometric detection. Part 1. Ammonium, chloride, nitrate, nitrite, orthophosphate, silicate and sulfate
BS 2846-7:1984 Guide to statistical interpretation of data-Tests for departure from normality
AWWA JAW11040 Journal AWWA — Temperature and Ionic Strength Corrections to the Langelier Index -- Revisited
DIN ISO 15923-1 E:2012 Draft Document - Water quality - Determination of ions by a discrete analysis system and spectrophotometric detection - Part 1: Ammonium, chloride, nitrate, nitrite, orthophosphate, silicate and sulfate (ISO/DIS 15923-1:2011)
DANSK DS/EN 15089:2009 Explosion isolation systems
NS-EN 15089:2009 Explosion isolation systems
BS EN ISO 8222:1996 Petroleum measurement systems. Calibration. Temperature corrections for use with volumetric reference measuring systems
BS M 60:1986 Specification for separable tube fittings for fluid systems
BS EN ISO 10304-2:1997 Water quality. Determination of dissolved anions by liquid chromatography of ions-Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
NS-EN 16932-2:2018 Drain and sewer systems outside buildings — Pumping systems — Part 2: Positive pressure systems
DANSK DS/IEC TR 61000-1-7:2016 Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions
BS PD IEC/TR 61000-1-7:2016 Electromagnetic compatibility (EMC)-General. Power factor in single-phase systems under non-sinusoidal conditions
DANSK DS/EN 16932-2:2018 Drain and sewer systems outside buildings – Pumping systems – Part 2: Positive pressure systems

Danish Standards Foundation

DS/ISO 5479:2004 Statistical interpretation of data - Tests for departure from the normal distribution

RO-ASRO

STAS R 12641-1988 IONIZING RADIATION MEASUREMENT SYSTEMS FOR THICKNESS MEASUREMENTS
STAS 7122/6-1987 STATI STICAL INTERPRETATION OF DATA Determination of a statistical tole- rance interval for a normal distribu- tion

BE-NBN

NBN-EN 28073-1994 information Technology. Long-distance communication and information exchange between systems. Open Systems Interconnection (OSI) (ISO/IEC 8073-1992 Technical Correction Table 1:19)

European Telecommunications Standards Institute (ETSI)

ETSI PRETS 300 731-1996 Television Systems; Enhanced 625-Line Phased Alternate Line (PAL) Television; PALplus

AGMA - American Gear Manufacturers Association

01FTM11-2001 Kinematic and Force Analysis of a Spur Gear System with Separation of Sliding and Rolling between Meshing Profiles

RU-GOST R

GOST R ISO 5479-2002 Statistical methods. Tests for departure of the probability distribution from the normal distribution
GOST R 56303-2014 United power system and isolated power systems. Operative-dispatch management. Normal connection diagrams of electric power facilities. General requirements of graphical presentation
GOST R 58085-2018 United power system and isolated power systems. Operative-dispatch management. Guidance for prevention of development and remedying the emergencies of normal regime of electrical part of power systems. Norms and requirements
GOST 2.795-1980 Unified system for design documentation. Graphic designations. Centrifuges
GOST 25183.9-1982 Photographic gelatine. Method of determination of hydrogen ions concentration
GOST R 54459-2011 Global navigation satellite systems. Differential correction systems. General technical requirements
GOST R 54459-2011(2020) Global navigation satellite systems. Differential correction systems. General technical requirements

American Gear Manufacturers Association

AGMA 01FTM11-2001 Kinematic and Force Analysis of a Spur Gear System with Separation of Sliding and Rolling between Meshing Profiles

International Telecommunication Union (ITU)

ITU-T G.663 AMD 1 FRENCH-2003 Application related aspects of optical amplifier devices and subsystems Amendment 1: Amendments to Appendix II Aspects relatifs aux applications des sous-syst鑝es et dispositifs amplificateurs optiques Amendement 1: amendements relatifs ?l'Appendice II
ITU-T G.663 AMD 1-2003 Application related aspects of optical amplifier devices and subsystems Amendment 1: Amendments to Appendix II Study Group 15
ITU-T H.222.0 AMD 2-2003 Information technology ?Generic coding of moving pictures and associated audio information: Systems Amendment 2: Support of IPMP on MPEG-2 systems SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Infrastructure of audiovisual services - Transmission multiple

AT-ON

OENORM EN 1366-11/A1-2021 Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components (Amendment)

Institute of Electrical and Electronics Engineers (IEEE)

IEEE P802.15.7a/D6, September 2023 IEEE Draft Standard for Local and Metropolitan Area Networks - Part 15.7: Short-Range Optical Wireless Communications Amendment: Higher Speed, Longer Range Optical Camera Communication (OCC)
IEEE Std C37.71-2001 Three-phase, manually operated subsurface and vault load-interrupting switches for alternating-current systems
IEEE 386-2006 Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V
IEEE Std C37.118.1A-2014 Synchrophasor Measurements for Power Systems Amendment 1: Modification of Selected Performance Requirements

CZ-CSN

CSN 34 0035-1969 Deviations from nominal voltages in A. C. systems.
CSN 40 4012-1971 Measurement of ionizing radiation and particle emission of radionuclides. Relative activity measurement with internal proporlional counters.

American Society for Testing and Materials (ASTM)

ASTM D7827-19 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
ASTM E1448-92(2004) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM UOP688-92 Normal Olefins and Normal Paraffins by Gas Chromatography
ASTM D7827-12(2017) Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
ASTM E2911-23 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM D7827-12 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
ASTM D7061-23 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

YU-JUS

JUS N.N6.174-1978 Radio Communications. Wired distribution systems. Methods ofmeasurements. Mutual isolation between systems outlets

KR-KS

KS B ISO 9345-2-2023 Microscopes — Imaging distances related to mechanical reference planes — Part 2: Infinity-corrected optical systems

ZA-SANS

SANS 163-2:1995 Water quality - Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
SANS 163-1:1992 Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination

ESDU - Engineering Sciences Data Unit

ESDU 85036 B-1993 Conversion of air-data system pressure errors into height and speed corrections.

PL-PKN

PN Z04207-02-1989 Air purity protection ests for mercaptans etermination of n-butyl mercaptan n work places by gas chromatography ith flame ionization etection

US-FCR

FCR FED H-08-1 SEC 16675-2001 ISOLATED POWER SYSTEMS
FCR VA 26 20 11-2010 ISOLATED POWER SYSTEMS
FCR UFGS-33 52 43.28-2010 FILTER SEPARATOR, AVIATION FUELING SYSTEM

HU-MSZT

MSZ 2242-1981 Separate related screw pad

U.S. Military Regulations and Norms

ARMY UFGS-33 52 43.28-2010 FILTER SEPARATOR, AVIATION FUELING SYSTEM

US-MSFC

MSFC NASA MPR 1280.4 REV G-2008 MSFC CORRECTIVE ACTION SYSTEM

IECQ - IEC: Quality Assessment System for Electronic Components

QC 440000-2006 Thermistors – Directly heated positive temperature coefficient – Part 1: Generic specification (Edition 3; Same as IEC 60738-1)

Aeronautical Radio Inc.

ARINC 701-1 ITEM 11.0 Flight Control System Wire Separation Criteria

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T H.222.0 AMD 3-1998 Information technology - Generic coding of moving pictures and associated audio information: Systems Amendment 3 (Amendment 3; 10 pp)

American National Standards Institute （ANSI)

ANSI/IEEE 386:2006 Separable Insulated Connector Systems for Power Distribution Systems above 600 V

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C37.118.1A-2014 Synchrophasor Measurements for Power Systems Amendment 1: Modification of Selected Performance Requirements

CEN - European Committee for Standardization

EN 16932-2:2018 Drain and sewer systems outside buildings - Pumping systems - Part 2: Positive pressure systems

BR-ABNT

ABNT NB-86-1961 Tolerance and Correction Systems (1)

United States Navy

NAVY MIL-PRF-32007-2003 OILY WASTEWATER SEPARATION SYSTEM, 6.7-GALLON PER MINUTE NAVY INTEGRATED MEMBRANE SYSTEM (NIMS)

ES-UNE

UNE-EN 16932-2:2019 Drain and sewer systems outside buildings - Pumping systems - Part 2: Positive pressure systems

Others: Normal phase system resolution,Normal Phase Chromatographic Resolution,normal phase liquid phase separation,Normal Phase Chromatography Peak Resolution,Normal Phase Rapid Separation System