Voltammetric testing of pseudocapacitance

Voltammetric testing of pseudocapacitance, Total:169 items.

The international standard classification for "Voltammetric testing of pseudocapacitance" includes: Optoelectronics. Laser equipment , Electronic tubes , Chemical reagents , Integrated circuits. Microelectronics , Glass in general , Electromagnetic compatibility(EMC) , Examination of water for chemical substances .

The Chinese standard classification for "Voltammetric testing of pseudocapacitance" includes: Technical management , Technical Management , Technical management , Semiconductor emitting device , Microwave tube , Chemical reagent in general , Microcircuit in general , Ceramic and glass in general , Basic standards and general methods , Basic standards and general methods for water treatment agent .

Professional Standard - Machinery

JB/T 12238-2015 Test method for concentrating photovoltaic solar power generation modules
JB/T 9478.2-2013 Measuring methods of photocell - Part 2: Voltage-current characteristic
JB/T 9478.2-1999 Measuring methods of photocell-Voltage-current characteristic

Group Standards of the People's Republic of China

T/CEEIA 483-2020 Photovoltaic electrical cabinets—EMC design and verification tests
T/CPIA 0020-2020 Electroluminescence Test Method for Crystalline Silicon Photovoltaic Cells
T/CPIA 0019.2-2020 Test methods for electrical parameters of bifacial photovoltaic modules Part 2: Formula method
T/CSTM 00465-2022 Test method of damp heat degradation of crystalline silicon photovoltaic cells
T/CPIA 0051-2023 Crystalline silicon photovoltaic cell metal electrode contact resistivity test method Transmission Line Model Method (TLM)
T/QAS 002-2019 Photovoltaic module test method under on-site standard state of photovoltaic power station
T/CSTM 00461-2022 Test method for electrode peel strength of crystalline silicon PV cells
T/QGCML 1918-2023 Photovoltaic module battery ribbon peeling test method
T/CPIA 0041-2022 Measurement of light and elevated temperature induced degradation(LETID) of crystalline silicon solar cells
T/ZJSEE 0022-2024 Outdoor test method for decline rate of photovoltaic module
T/CESA 1054-2018 Test methods for Porous carbons for electrodes of supercapacitors
T/CESA 1051-2019 Supercapacitor safety specification-Part 2:Test method

National Metrological Technical Specifications of the People's Republic of China

JJF 1584-2016 Calibration Specification for Current Transformer Volt--Ampere Characteristic Meters

Professional Standard - Electron

SJ 2355.4-1983 Methods of measurement for junction capacitance of light-emitting devices
SJ/Z 9009-1987 Methods for measurement of direct interelectrode capacitances of electronic tubes and valves
SJ 2354.5-1983 Method of measurement for capacitance of PIN and avalanche photodiodes
SJ 2658.4-1986 Methods of Measurement for Semiconductor Infrared Diodes - Methods of Measurement for Capacitance
SJ/T 10725-1996 Methods for determining main characteristics of measurement condenser microphones
SJ 1551-1979 Method of measurement for resistivity of silicon epitaxial layer (capacitance-voltage method) (Provisional)
SJ/T 10300-1991 Test methods for capacitance measuring instruments

Professional Standard - Aerospace

QJ 1323.23-1987 Electromagnetic Relay Test Method Capacitance Test

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7274-1987 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
GB/T 3914-1983 Chemical reagents;The general rules of anodic stripping voltametry
GB/T 30983-2014 Test method for optical properties of photovoltaic glass
GB/T 7274-2015 Methods for the measurement of direct inter-electrode capacitances of electronic tubes and valves
GB/T 16526-1996 The method measuring the lead-to-lead and loading capacitance of package leads
GB/T 3914-2008 Chemical reagent - The general rules of anodic stripping voltammetry

Professional Standard - Agriculture

GB 3914-1983 General rules for anodic stripping voltammetry of chemical reagents
GB 39-1988 General rules for anodic stripping voltammetry of chemical reagents

能源

NB/T 32026-2015 Measurement and evaluation method of grid-integration characteristics for photovoltaic power station

国家能源局

NB/T 32033-2016 Technical code for inverter electromagnetic compatibility testing of photovoltaic power station

国家质量监督检验检疫总局

SN/T 4687-2016 Methods of measurement of electromagnetic compatibility for electric toys

Guangxi Provincial Standard of the People's Republic of China

DB45/T 2109-2019 Volumetric method for determination of selenium content in copper indium gallium selenide solar photovoltaic cell target

Military Standard of the People's Republic of China-General Armament Department

GJB 360.31-1987 Test methods for electronic and electrical components Capacitance test

未注明发布机构

ASTM RR-D02-1537 2003 D6447-Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
ASTM RR-D02-1693 2010 D7527-Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
ASTM E973M-96 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell [Metric]
CSA C22.2 No.62790-2020 Junction boxes for photovoltaic modules — Safety requirements and tests

Professional Standard - Post and Telecommunication

YD/T 735-1994 Electromagnetic compatibility limits and test methods of telephone sets
YD/T 1633-2007 Test Methods of Electromagnetic Compatibility on-Site

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37905-2019 Reclaimed water quality—Determination of chromium—Voltammetry and polarography

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3288-2020 Water Quality Determination of Nickel and Cobalt Adsorption and Stripping Voltammetry

工业和信息化部

SJ/T 11582-2016 Test method for electrical performance of power supercapacitors

CZ-CSN

CSN 99 2162-1990 Ammeters, voltmeters, wattmeters, varmeters. Methods of verification and testing
CSN 35 4508-1983 Appliance couplers to 16 A, 250 V. Technical requirements and methods of tests
CSN 35 8542-1968 Methods of testing interelectrode capacitances of electronio tubes
CSN 34 8004-1987 Electrical alternating current appliances for voltage from 3 kV to 750 kV. Insulators. Requirements on electrical strength of the insulation and testing methods

PL-PKN

PN C04560-04-1991 Water and waste water Tests for cadmium Determination of cadmium by voltammetry
PN C04595-06-1991 Water and waste water Tests for lead Determination of lead by voltammetry
PN C04596-05-1992 Water and waste water Tests for zinc Determination of zinc by yoltammetry
PN C04611-06-1992 Water and waste water Tests for copper Determination of copper by voltammetry
PN E04160 ArkusZ77-1973 Elec?ric cables Me?hods of ?es?ing Capaci?ance felecommunication cables test
PN E04160 ArkusZ78-1973 Electric cables Me?hods of tes?ing Capaci?ance unbalance test
PN E04160 ArkusZ76-1973 Electric cables Me?hods of testing Power factor and capacitance power cables test
PN O79713-1989 Glass containers Internal pressure resistance Test methods
PN E04271-1985 Rotating electrical machines Three-phase synchronous machines of 1 kV ? A rating and larger Tests methods

RO-ASRO

STAS 3184/2-1985 PLUGS, SOCKET-OUTLETS'AND COU- PLERS FOR ELECTRIC WIRINGS UP TO 380 V ALTERNAT1NG CURRENT, AND 250 V DIRECT CURRENT AND UP TO 25 A Rules and test methods
STAS 3686/2-1974 CIRGUIT-BREAKERS FOR ALTER- NAT1NG YOLTAGES ABOVE 1 kV. Methods of tesling during 110-load operations
STAS 1564/2-1985 ALTERNATING CURRENT DISCONECTORS FOR VOLTAGES ABOVE 1 KV Rules and methods of test

GOSTR

GOST R 58809.2-2020 Photovoltaic modules. safety qualification. Part 2. Test methods

American National Standards Institute （ANSI)

ANSI C57.12.50-1981 Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts, Requirements for; Correction June 1982
ANSI C57.12.52-1981 Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
ANSI C57.12.51-1981 Dry-Type Power Transformers 501 kVA and Larger, Three-Phase with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for Ventilated
ANSI C57.12.57-1987 Transformers - Ventilated Dry-Type Network Transformers 2500 kVA and Below, Three-Phase, with High-Voltage 34 500 Volts and Below, Low-Voltage 216Y/125 and 480Y/277 Volts- Requirements This is Now Copyrighted by IEEE

Korean Agency for Technology and Standards (KATS)

KS C 8532-1995 Measuring procedure of residual capacity for lead acid battery in photovoltaic system
KS C 8532-2020 Measuring procedure of residual capacity for lead acid battery in photovoltaic system
KS C IEC 62790:2016 Junction boxes for photovoltaic modules ― Safety requirements and tests
KS C 5103-1977 Testing method for FIXED TANTALUM ELECTOLYTIC capacitors
KS C 8532-1995(2020) Measuring procedure of residual capacity for lead acid battery in photovoltaic system

U.S. Military Regulations and Norms

ARMY UFGS-26 32 33.00 10-2007 UNINTERRUPTIBLE POWER SUPPLY (UPS) SYSTEM ABOVE 15 KVA CAPACITY

RU-GOST R

GOST 28885-1990 Capacitors. Methods of measurements and tests
GOST R 52472-2005 Vodkas and special vodkas. Acceptance rules and test methods
GOST 28977-1991 Photovoltaic devices. Part 1. Measurement of photovoltaic current-voltage characteristics
GOST 32938-2014 Perfumery and cosmetic products. Stripping voltammetric method for determination of arsenic
GOST 5363-1993 Vodka. Acceptance rules and test methods

Indonesia Standards

SNI 04-1224-1989 Three phase induction motors with power up to 100 kW, Methods of test
SNI 04-6629.2-2006 PVC insulated cables with a rated voltage up to 450/750 V. Part 2: Test methods

British Standards Institution (BSI)

BS EN IEC 61730-2:2018 Photovoltaic (PV) module safety qualification. Requirements for testing
BS EN IEC 62790:2020 Junction boxes for photovoltaic modules. Safety requirements and tests
BS EN 62490-2:2010 ESL measuring method. Part 2: Surface mount capacitors for use in electronic equipment
BS EN IEC 62920:2017+A1:2021 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
PD IEC TS 62804-2:2022 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation. Thin-film
BS EN 50289-1-5:2001 Communication cables - Specifications for test methods - Electrical test methods - Capacitance - SEC5 : Capacitance
PD IEC/TS 62804-1:2015 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation. Crystalline silicon

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.5.4.18-1998 Capacitance Test

TR-TSE

TS 756-1969 SODIUM CARBONATE FOR INDUSTRIAL USE DETERMINATION OF CHLORIDE CONTENT VOLHARD VOLUMETRIC METHOD

AENOR

UNE-EN 50289-1-5:2001 Communication cables - Specifications for test methods -- Part 1-5: Electrical test methods - Capacitance.
UNE-EN 50521:2010/A1:2013 Connectors for photovoltaic systems - Safety requirements and tests
UNE-EN 50521:2010 Connectors for photovoltaic systems - Safety requirements and tests

SCC

DANSK DS/EN 50289-1-5:2001 Communication cables - Specifications for test methods - Part 1-5: Electrical test methods - Capacitance
DANSK DS/EN 62790:2015 Junction boxes for photovoltaic modules – Safety requirements and tests
AENOR UNE-EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
CEI EN IEC 62790:2021 Junction boxes for photovoltaic modules - Safety requirements and tests
CEI EN 50521:2009 Connectors for photovoltaic systems - Safety requirements and tests
BS EN 62790:2015 Junction boxes for photovoltaic modules. Safety requirements and tests
CEI EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
UNE 20555-1/1C:1985 VARIABLE CAPACITORS. TERMS AND METHODS OF TEST. AMENDMENTS ON CAPACITANSE MEASUREMENT
CEI EN 50289-1-5:2001 Communication cables - Specifications for test methods - Part 1-5: Electrical test methods - Capacitance
CEI EN 50521/A1:2009 Connectors for photovoltaic systems - Safety requirements and tests
DANSK DS/EN 50521:2009 Connectors for photovoltaic systems - Safety requirements and tests
AENOR UNE-EN 50521:2010 Connectors for photovoltaic systems. Tests and safety requirements.
AENOR UNE-EN 50521/A1:2010 Connectors for photovoltaic systems. Tests and safety requirements.
DANSK DS/EN 50521/A1:2009 Connectors for photovoltaic systems - Safety requirements and tests
DANSK DS/EN IEC 62790:2020 Junction boxes for photovoltaic modules – Safety requirements and tests
AENOR UNE 20555-1:1979 Variable capacitors. Definitions and test methods.
MIL MIL-M-52793-1974 MULTIMETER, BATTERY TESTING, 0 TO 35 AMP, 0 TO 10 VOLT (NO S/S DOCUMENT)
BS EN 2591-B3:1994 Elements of electrical and optical connection. Test methods-Electrical continuity at microvolt level
CEI EN 62920/A1:2018 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
AENOR UNE 20555-1/1C:1985 Variable capacitors. Definitions and test methods. Modifications to the measurement of capacity.
DANSK DS/EN 62920:2017 Photovoltaic power generating systems – EMC requirements and test methods for power conversion equipment
DANSK DS/EN 62920/A1:2017 Photovoltaic power generating systems – EMC requirements and test methods for power conversion equipment
CEI EN 62920:2018 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
BS EN 62920:2017+A11:2020 Photovoltaic power generating systems. EMC requirements and test methods for power conversion equipment
BS EN 62920:2017 Photovoltaic power generating systems. EMC requirements and test methods for power conversion equipment
AENOR UNE-EN 62920:2018 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
UNE 20555-1:1979 VARIABLE CAPACITORS. TERMS AND METHODS OF TEST
DANSK DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
BS PD IEC TS 62804-2:2022 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation-Thin-film
CEI EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements Part 22-1: Capacitance tests - Test 22a: Capacitance
DIN EN 50521/A1 E:2012 Draft Document - Connectors for photovoltaic systems - Safety requirements and tests; German version EN 50521:2008/FprAA:2011
DIN EN 50521 E:2008 Draft Document - Connectors for photovoltaic systems - Safety requirements and tests; German version FprEN 50521:2008

HU-MSZT

MSZ 451-1963 General Technical Specifications and Testing of Heavy Duty Electrode Mounting Materials for Voltage 1000 Volts Point 6 200 A
MNOSZ 15790-1953 General technical regulations for safety testing of open air equipment 00 volts, 200 amps

ES-UNE

UNE-EN IEC 62790:2021 Junction boxes for photovoltaic modules - Safety requirements and tests
UNE-EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
UNE-EN 62920:2018/A11:2021 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
UNE-EN 62920:2018 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
UNE-EN 62920:2018/A1:2022 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
UNE-EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (Endorsed by AENOR in October of 2010.)

Lithuanian Standards Office

LST EN 50521-2009/A1-2012 Connectors for photovoltaic systems - Safety requirements and tests
LST EN 50521-2009 Connectors for photovoltaic systems - Safety requirements and tests
LST EN 50289-1-5-2002 Communication cables. Specifications for test methods. Part 1-5: Electrical test methods. Capacitance

International Electrotechnical Commission (IEC)

IEC 62790:2020 Junction boxes for photovoltaic modules - Safety requirements and tests
IEC 62920:2017 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment

GSO

GSO ISO 24090:2023 Dried barberry — Specification and test methods
GSO IEC 62790:2022 Junction boxes for photovoltaic modules - Safety requirements and tests
BH GSO IEC 62790:2023 Junction boxes for photovoltaic modules - Safety requirements and tests
GSO IEC 60885-1:2002 ELECTRICAL TEST METHODS FOR ELECTRIC CABLES - PART 1: ELECTRICAL TESTS FOR CABLES, CORDS AND WIRES FOR VOLTAGES UP TO AND INCLUDING 450/750 V
GSO IEC 62920:2021 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
GSO IEC 61196-1-103:2014 Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable
GSO 1842:2007 METHODS OF TESTING FOR PLUGS AND SOCKET OUTLETS FOR VOLTAGES FROM 127V AND UP TO 250V FOR HOUSEHOLD AND SIMILAR GENERAL USE

Danish Standards Foundation

DS/EN 50289-1-5:2002 Communication cables - Specifications for test methods - Part 1-5: Electrical test methods - Capacitance
DS/EN 50521:2009 Connectors for photovoltaic systems - Safety requirements and tests
DS/EN 50521/A1:2012 Connectors for photovoltaic systems - Safety requirements and tests
DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0126-3-2013 Connectors for photovoltaic systems - Safety requirements and tests; German version EN 50521:2008 + A1:2012

European Committee for Electrotechnical Standardization（CENELEC）

EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
EN IEC 62790:2020 Junction boxes for photovoltaic modules - Safety requirements and tests

Association Francaise de Normalisation

NF C57-190*NF EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
NF EN IEC 62790:2020 Junction boxes for photovoltaic modules - Safety requirements and testing
NF EN 62920/A11:2020 Photovoltaic power generation systems - EMC requirements and test methods for power conversion equipment
NF EN 50289-1-5:2001 Communication cables - Specifications for test methods - Part 1-5: electrical test methods - Capacity
NF EN 62920:2017 Photovoltaic power generation systems - EMC requirements and test methods for power conversion equipment
NF EN 62920/A1:2021 Photovoltaic power generation systems - EMC requirements and test methods for power conversion equipment
NF EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements - Part 22-1: capacitance tests - Test 22a: capacitance

YU-JUS

JUS H.G8.025-1980 Reagents. Hydrochhric acid. Determination of lead, copper, zine and cadmium contents. Anodic strip- ping voltammetry method
JUS H.G8.040-1981 Reagents. Sulphuric acid. Determination of lead, copper, zine and cadmium contents. Anodicstripping voltammetry method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 158.1 ERTA-2013 Methods of Testing Capacity of Refrigerant Solenoid Valves
ASHRAE 158.1-2012 Methods of Testing Capacity of Refrigerant Solenoid Valves
ASHRAE 158.1-2004 Methods of Testing Capacity of Refrigerant Solenoid Valves
ASHRAE 158.1-2019 Methods of Testing Capacity of Refrigerant Solenoid Valves

CU-NC

NC 66-30-1985 Electronics. Variable Ceramic Capacitors. Testing Methods

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 158.1-2003 Methods of Testing Capacity of Refrigerant Solenoid Valves

American Society for Testing and Materials (ASTM)

ASTM D7527-10(2018) Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry

Underwriters Laboratories (UL)

UL 61724-2-2019 UL Standard for Safety Photovoltaic system performance – Part 2: Capacity evaluation method (First Edition)

IEC - International Electrotechnical Commission

IEC 60512-22-1:2010 Connecteurs pour équipements électroniques – Essais et mesures – Partie 22-1: Essais de capacité – Essai 22a: Capacité (Edition 1.0)

Others: Voltammetric testing of pseudocapacitance