Ultra and metal materials

Ultra and metal materials, Total:348 items.

The international standard classification for "Ultra and metal materials" includes: Mechanical testing of metals , Non-destructive testing of metals , Magnetic materials , Elements of buildings , Interior finishing , Abrasives .

The Chinese standard classification for "Ultra and metal materials" includes: Metal mechanical property test method , Metal nondestructive testing method , Electrician alloy parts , Metal components and accessories , Decorative material , Electric power testing technique , Material and component for instrument and meter , Grinding material and apparatus .

Taiwan Provincial Standard of the People's Republic of China

CNS 13382-5-2004 Implants for surgery - Metallic materials - Unalloyed titanium
CNS 14135-1998 Method of thickness measurement by ultrasonic pulse echo technique for metals
CNS 13382.5-2004 Implants for surgery - Metallic materials - Unalloyed titanium
CNS 3712-1974 Ultrasonic Testing for Metals

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21838.4-2020 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings
GB/T 24172-2009 Method for evaluation of tensile properties of metallic superplastic materials
GB/T 21220-2007 Soft magnetic metallic materials
GB/T 8651-2002 Metal plates - Flaw detection method by the ultrasonic plate wave
GB/T 10562-1989 Metallic material--Standard test method for the extra-low expansion coefficient--Light interferometer method
GB/T 33163-2016(英文版) Metallic materials-Residual stress-With ultrasonic impact treatment
GB/T 8651-2015 Flaw detection method by the ultrasonic plate wave for metal plates
GB/T 43896-2024 Metallic materials—Very high cycle fatigue—Ultrasonic fatigue test method
GB/T 33163-2016e Metallic materials—Residual stress—With ultrasonic impact treatment
GB/T 34205-2017 Metallic materials--Hardness testing--Ultrasonic contact impedance method
GB/T 21220-2024 Soft magnetic metallic materials
GB/T 21838.4-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
GB/T 20935.1-2007 Method of electromagnetic acoustic inspection for metal materials-Part 1:Standard guide for electromagnetic acoustic transducers(EMATs)
GB/T 20935.1-2018 Metal materials—Method of electromagnetic acoustic inspection—Part 1: Standard guide for electromagnetic acoustic transducers (EMATs)
GB/T 33163-2016 Metallic materials一Residual stress一With ultrasonic impact treatment
GB/T 23444-2024 Metal and metal-composite ceilings
GB/T 23444-2009 Metal and Metal-Composite Ceilings

Group Standards of the People's Republic of China

T/GDAC 1-2018 Metal and metal composite ceiling panels
T/ATNT 1-2023 Method for testing the performance of couplant for ultrasonic testing of metal materials
T/CSAA 32-2024 Test method for measuring residual stress using laser ultrasonic Metallic material
T/CSAA 33-2024 Control method for residual stress by laser ultrasonic Metallic material
T/CBMMA 9 Inorganic non-metallic material ultrafine powder vertical classifier

Professional Standard-Ships

CB/T 4257-2013 Ultrasonic testing method of marine metallic composite
CB/Z 211-1984 Technical specification for ultrasonic flaw detection of marine metal composite materials

Professional Standard - Building Materials

JC/T 2010-2021 Metal and metallic mineral fillings for friction materials
JC/T 2713-2022 Vertical roller mill for ultrafine grinding of inorganic nonmetallic materials
JC/T 1059-2007 Metal and metal - composite ceilings
JC/T 2010-2010 Metal and metallic mineral fillings for friction materials

Professional Standard - Energy and Power Planning

DL/T 1161-2012 The Technical Inspection Codes for Metal and Structural Components in Ultra-supercritical Units

Professional Standard - Agriculture

SN/T 5496-2023 Evaluation of fatigue properties of metal materialsNonlinear ultrasonic method

未注明发布机构

FORD NON-PRODUCTION MG-2002 NON-METALLIC MATERIALS
FORD EMS INDEX VOL 10-2007 PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 10 - NON-METALLICS
FORD NON-PRODUCTION ME-MG-2003 PAPER AND NON-METALLICS
FORD EMS INDEX VOL 11-2007 PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 11 - NON-METALLICS
DNV-CP-0107-2021 Sacrificial anode material metal material

Professional Standard - Machinery

JB/T 6819.6-1993 Instrument Material Terminology - Expansion Alloy, Thermal Bimetal, Electrical Vacuum Material and Sealing Material
JB/T 11424-2013 Pre-mixed Metal Powders for Superabrasive Products
JB/T 12544-2015 Superabrasive products-Metal bond diamond squaring wheel

Professional Standard - Ferrous Metallurgy

YB/T 4085-1992 Metal material strapping machine

Korean Agency for Technology and Standards (KATS)

KS D 0077-2022 Glossary of terms used in metallic superplastic materials
KS D 0077-2002(2022) Glossary of terms used in metallic superplastic materials
KS D 0077-2002 Glossary of terms used in metallic superplastic materials
KS D ISO 3928:2004 Sintered metal materials, excluding hardmetals-Fatigue test pieces
KS D 0077-2002(2017) Glossary of terms used in metallic superplastic materials
KS D ISO 2740:2009 Sintered metal materials, excluding hardmetals－Tensile test pieces
KS D ISO 20032-2009 Method for evaluation of tensile properties of metallic superplastic materials
KS D ISO 20032-2013 Method for evaluation of tensile properties of metallic superplastic materials
KS D ISO 20032:2009 Method for evaluation of tensile properties of metallic superplastic materials
KS D ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2021 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2021) Metallic materials － Instrumented indentation test for hardness and materials parameters － Part 4: Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2016) Metallic materials － Instrumented indentation test for hardness and materials parameters － Part 4: Test method for metallic and non-metallic coatings
KS B ISO 9649:2002 Metallic materials-Wire-Reverse torsion test
KS B ISO 9649:2015 Metallic materials－Wire－Reverse torsion test
KS B ISO 11531-2002(2012) Metallic materials－Earing test
KS M 6777-2019 Gasket material, non-metallic
KS M 6777-2009 Gasket material, non-metallic
KS M 6777-2014 Gasket material, non-metallic
KS D ISO 2738-2013 Sintered metal materials, excluding hardmetals－Permeable sintered metal materials－Determination of density, oil content and open porosity
KS M 6777-2014(2019) Gasket material, non-metallic
KS F 4770-1-2017 Soundproof panel — Metallic
KS D ISO 2738:2013 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS D ISO 2738:2011 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS D ISO TR 14321:2011 Sintered metal materials, excluding hardmetals-Metallographic preparation and examination
KS M 6777-2014(2024) Gasket material, non-metallic
KS B ISO 8492-2021 Metallic materials－Tube－Flattening test
KS B ISO 8494:2001 Metallic materials Tube Flanging test
KS B ISO 8494-2021 Metallic materials－Tube－Flanging test
KS B ISO 8493-2021 Metallic materials－Tube－Drift-expanding test
KS B ISO 8492:2001 Metallic materials Tube Flattening test
KS B ISO 8495-2021 Metallic materials－Tube－Ring-expanding test
KS B ISO 8493:2001 Metallic materials Tube Drift-expanding test

South African Bureau of Standard

SANS 7799:2003 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
SANS 8494:2003 Metallic materials - Tube - Flanging test
SANS 8492:2003 Metallic materials - Tube - Flattening test
SANS 10275:2003 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
SANS 8495:2003 Metallic materials - Tube - Ring-expanding test
SANS 8493:2003 Metallic materials - Tube - Drift-expanding test

Japanese Industrial Standards Committee (JISC)

JIS H 7007:1995 Glossary of terms used in metallic superplastic materials
JIS H 7007:2002 Glossary of terms used in metallic superplastic materials
JIS H 7502:2003 Method for evaluation of compressive properties of metallic superplastic materials
JIS H 7501:2002 Method for evaluation of tensile properties of metallic superplastic materials
JIS H 7501:2016 Method for evaluation of tensile properties of metallic superplastic materials
JIS H 7503:2003 Method for measurement of cavity volume fraction of superplastically deformed metallic materials
JIS T 6118:2012 Noble metal materials for dental metal-ceramic restorations
JIS Z 2253:2011 Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent
JIS Z 2344:1993 General rule of ultrasonic testing of metals by pulse echo technique
JIS H 7504:2003 Method for evaluation of blow formability by bulging test on metallic superplastic materials
JIS Z 2254:2008 Metallic materials -- Sheet and strip -- Determination of plastic strain ratio
JIS H 7505:2004 Method for evaluation of tensile properties of metallic superplastic materials using R-type specimen

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN prEN 3718:1970 Test method for metallic materials - Ultrasonic inspection of tubes
ASD-STAN PREN 3718-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Tubes (Edition P 1)
ASD-STAN prEN 3875:1970 Metallic materials - Filler metal for brazing - Technical specification

American Society for Testing and Materials (ASTM)

ASTM E1158-98 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Examination of Metal and Metal Alloy Production Material
ASTM E1158-09 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material
ASTM E1158-04 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Examination of Metal and Metal Alloy Production Material
ASTM E1158-14 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material
ASTM E2448-11 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
ASTM STP 438-1968 Metal Matrix Composites
ASTM E213-14 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
ASTM E3370-24 Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 20032:2016 Method for evaluation of tensile properties of metallic superplastic materials

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
OS GSO ISO 14577-4:2014 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings
OS GSO ISO 16630:2010 Metallic materials -- Sheet and strip -- Hole expanding test

Ente Nazionale Italiano di Unificazione

UNI EN 3718:2013 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
UNI 3667:1968 Corrosion of metallic materials. Corrosion conditions and factors for metallic materials in conctat with solutions.
UNI 556-5:1978 Mechanical testing of metallic materials. Tensile test. Test pieces for sintered metallic materials
UNI EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
UNI EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
UNI 3668:1968 Corrosion of metallic materials. Corrosion conditions and factors for metallic materials in contact with damp solids.
UNI EN 23134-1:1992 Light metals and their alloys. Terms and definitions. Materials.
UNI EN ISO 8495:2014 Metallic materials - Tube - Ring-expanding test
EC 1-2020 UNI EN ISO 8495:2014 Metallic materials - Tube - Ring-expanding test
UNI EN ISO 8494:2014 Metallic materials - Tube - Flanging test
UNI EN 10234:1995 Metallic materials. Tube. Drift expanding test.
UNI EN 10233:1995 Metallic materials. Tube. Flattening test.
EC 1-2005 UNI EN ISO 8493:2005 Metallic materials - Tube - Drift- expanding test
UNI EN ISO 8493:2005 Metallic materials - Tube - Drift- expanding test
UNI 9295-1:1988 Light metals and their alloys. Materials. Terminology and classification
UNI EN 4050-4:2013 Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria
UNI 10932:2001 Heat treatment of metallic materials - Selective surface layer hardening of ferrous materials

International Organization for Standardization (ISO)

ISO 20032:2007 Method for evaluation of tensile properties of metallic superplastic materials
ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
ISO/CD 16630:2024 Metallic materials
ISO/CD 20198:2023 Metallic materials
ISO/CD 15653:2024 Metallic materials
ISO 16630:2017 Metallic materials - Sheet and strip - Hole expanding test
ISO 11531:2015 Metallic materials - Sheet and strip - Earing test
ISO 16630:2009 Metallic materials - Sheet and strip - Hole expanding test
ISO 10113:2020 Metallic materials — Sheet and strip — Determination of plastic strain ratio
ISO 11531:2022 Metallic materials — Sheet and strip — Earing test
ISO 10113:2006 Metallic materials - Sheet and strip - Determination of plastic strain ratio
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO/TR 14321:1997 Sintered metal materials, excluding hardmetals - Metallographic preparation and examination
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 8492:1986 Metallic materials; Tube; Flattening test
ISO 7802:1983 Metallic materials; Wire; Wrapping test
ISO 8494:1998 Metallic materials - Tube - Flanging test
ISO 8493:1986 Metallic materials; Tube; Drift expanding test
ISO 8492:2013 Metallic materials.Tube.Flattening test

British Standards Institution (BSI)

BS ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
BS ISO 20032:2007 Method for evaluation of tensile properties of metallic superplastic materials
06/30129315 DC ISO 20032. Method for evaluation of tensile properties of metallic super plastic materials
BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS ISO 11531:2022 Metallic materials. Sheet and strip. Earing test
BS ISO 16630:2017 Metallic materials. Sheet and strip. Hole expanding test
BS EN ISO 14577-4:2016 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS ISO 10113:2006 Metallic materials - Sheet and strip - Determination of plastic strain ratio
BS EN 12501-2:2003 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Low alloyed and non alloyed ferrous materials
BS ISO 11531:2015 Metallic materials. Sheet and strip. Earing test
BS EN 3718:2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of tubes
BS ISO 9649:2023 Metallic materials. Wire. Reverse torsion test
BS EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
BS 5600-4.4:1979 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Determination of density for impermeable sintered metal materials
BS EN 4050-2:2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Performance of test
BS 5600-3-3.1:1979 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals-Determination of density for impermeable sintered metal materials
BS 7253-5:1990 Non-metallic materials for surgical implants-Specification for ultra-high molecular mass polyethylene in moulded form
BS ISO 7802:2013 Metallic materials. Wire. Wrapping test
BS EN 4050-3:2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Reference blocks
BS EN 4050-4:2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Acceptance criteria
BS EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
BS EN 10233:1994 Metallic materials. Tube. Flattening test
BS EN 10236:1994(1999) Metallic Materials - Tube - Ring Expanding Test
BS EN 10236:1994 Metallic materials. Tube. Ring expanding test
BS EN 4050-1:2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. General requirements
BS EN 23134-1:1991 Light metals and their alloys. Terms and definitions-Materials

Bureau of Indian Standards

IS 17915-2022 Method for evaluation of tensile properties of metallic superplastic materials
IS 18733-2024 Metallic Materials- Sheet and Strip- Earing Test
IS 17144-4-2019 Metallic Materials —— Instrumented Indentation Test for Hardness and Materials Parameters Part 4 Test Method for Metallic and Non-Metallic Coatings
IS 1755-2018 Metallic Materials - Wire - Wrapping test
IS 2330-2011 Metallic Materials - Tube - Flanging Test

Swedish Institute for Standards

SS-EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
SS 112319:1982 Metallic materials - Test piece for testing metals at elevated temperature
SS-ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials (ISO 20032:2013, IDT)
SS 112644:1986 Metallic materials - Tubes - Flattening test
SS-EN 10236:1994 Metallic materials - Tube - Ring expanding test
SS-EN ISO 8492:2005 Metallic materials - Tube - Flattening test (ISO 8492:1998)
SS-EN 10234:1994 Metallic materials - Tube - Drift expanding test

United States Navy

NAVY MIL-P-17303 D-1984 PACKING MATERIALS, PLASTIC METALLIC AND PLASTIC NONMETALLIC
NAVY MIL-P-17303 D (2)-1991 PACKING MATERIALS, PLASTIC METALLIC AND PLASTIC NONMETALLIC

Standard Association of Australia （SAA）

AS 2505.1:2004 Metallic materials - Sheet, strip and plate - Bend tests
AS 2505.1:2004(R2017) Metallic materials - Sheet, strip and plate - Bend tests
AS 2505.2:2004 Metallic materials - Bars, rods and solid shapes - Bend tests
AS 2403:2008 Metallic materials - Sheet and strip - Determination of plastic strain ratio
AS 2505.2:2004(R2017) Metallic materials - Bars, rods and solid shapes - Bend tests

Danish Standards Foundation

DS/EN ISO 7799:2001 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
DANSK DS/EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
DS/EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
DANSK DS/EN 13479:2017 Welding consumables – General product standard for filler metals and fluxes for fusion welding of metallic materials
DS/EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
DANSK DS/EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
DS/EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
DANSK DS/EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test
DANSK DS/EN ISO 8495:2013 Metallic materials - Tube - Ring-expanding test
DS/ISO 8492:1989 Metallic materials. Tube. Flattening test
DS/EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test
DS/EN ISO 8495:2004 Metallic materials - Tube - Ring-expanding test

Spanish Association for Standardization (UNE)

UNE 7473:1999 METALLIC MATERIALS. SHEET AND STRIP 3 MM THICK OR LESS. REVERSE BEND TEST.
AENOR UNE-EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
UNE-EN ISO 7799:2000 METALLIC MATERIALS. SHEET AND STRIP 3 MM THICK OR LESS. REVERSE BEND TEST (ISO 7799:1985)
AENOR UNE-EN ISO 7799:2000 METALLIC MATERIALS. SHEET AND STRIP 3 MM THICK OR LESS. REVERSE BEND TEST (ISO 7799:1985)
UNE-EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
UNE 7425:1986 METALLIC MATERIALS. WIRE. WRAPPING TEST.
UNE 7-425-1986 metallic material. metal wire. Curling test
UNE-EN 13479:2018 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
AENOR UNE-EN 13479:2018 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
UNE-EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
UNE 7-469-1988 Metal materials, metal wire folding AC test
UNE 7469:1999 METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE 7469:2003 ERRATUM METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE 7468:1999 METALLIC MATERIALS. WIRE. SIMPLE TORSION TEST
UNE 7-468 ERRATUM-1988 metallic material. metal wire. single twist test
UNE 7-468-1988 metallic material. metal wire. single twist test

Association Francaise de Normalisation

NF EN 3718:2013 Aerospace Series - Test Method Applicable to Metallic Materials - Ultrasonic Testing of Tubes
NF A05-001:1991 CORROSION OF METALS AND ALLOYS. VOCABULARY.
NF EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
NF L10-012*NF EN 3718:2013 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
NF A03-155-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.
NF EN ISO 2738:2000 Sintered metallic materials, excluding hard metals - Permeable sintered metallic materials - Determination of density, oil content and open porosity
NF A03-155-4*NF EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings
NF A05-412-2*NF EN 12501-2:2003 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2 : low alloyed and non alloyed ferrous materials
NF A03-094*NF EN ISO 8494:2014 Metallic materials - Tube - Flanging test
NF A95-311*NF EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity.
NF A03-094:2004 Metallic materials - Tube - Flanging test.
NF A03-094:1994 Metallic materials. Tube. Flanging test.
NF A03-092*NF EN ISO 8492:2014 Metallic materials - Tube - Flattening test
NF EN 23312:1993 Sintered metallic materials and hard metals - Determination of Young's modulus
NF EN ISO 3369:2010 Waterproof sintered metal materials and hard metals - Determination of density
NF A03-093*NF EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test

German Institute for Standardization

DIN EN 3718:2008 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
DIN EN 3718:2012-08 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes; German and English version EN 3718:2012
DIN EN ISO 7799:2000-07 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
DIN 50134:2024-07 Testing of metallic materials - Compression test of metallic cellular materials
DIN 50134:2024 Testing of metallic materials - Compression test of metallic cellular materials
DIN 50134:2008-10 Testing of metallic materials - Compression test of metallic cellular materials
DIN EN 3718 E:1996-06 Draft Document - Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
DIN 50134:2008 Testing of metallic materials - Compression test of metallic cellular materials
DIN ISO 7802:2008 Metallic Materials - Wire - Wrapping test (ISO 7802:1983); English version of DIN ISO 7802-2008-10
DIN ISO 7802 E:2014-04 Metallic materials - Wire - Wrapping test
DIN 50134 E:2023 Draft Document - Testing of metallic materials - Compression test of metallic cellular materials
DIN EN 3718 E:1996 Draft Document - Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
DIN EN 13479:2017-10 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials; German version EN 13479:2017
DIN EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
DIN EN 13479:2005-03 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
DIN EN ISO 2738:2000-02 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN ISO 9649:1993 Metallic materials; wire; reverse torsion test; identical with ISO 9649:1990
DIN ISO 7800:2008 Metallic Materials - Wire - Simple torsion test (ISO 7800:2003)
DIN EN ISO 14577-4:2017-04 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016
DIN EN 13479 E:2016 Draft Document - Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials; German and English version prEN 13479:2016
DIN EN ISO 14577-4 E:2015-05 Instrumental indentation tests for hardness and material parameters of metallic materials Part 4: Test methods for metallic and non-metallic coatings (draft)
DIN ISO 9649 E:2017-04 Metallic materials - Wire - Reverse torsion test
DIN V 30995:1999 Sintered metal materials, excluding hardmetals - Metallographic preparation and examination (ISO/TR 14321:1997)
DIN EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN 30910-4 E:2009-04 Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts
DIN 30910-4:2010 Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts
DIN 51212:1978 Testing of Metallic Materials; Torsion Test of Wires
DIN 51212:1965 Testing of Metallic Materials; Torsion Test of Wires
DIN ISO 7802:2008-10 Metallic Materials - Wire - Wrapping test (ISO 7802:1983)
DIN ISO 7802:2014 Metallic materials - Wire - Wrapping test (ISO 7802:2013)
DIN EN 12501-2:2003 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials; German version EN 12501-2:2003
DIN ISO 7800:2013-09 Metallic Materials - Wire - Simple torsion test (ISO 7800:2012)
DIN EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007); English version of DIN EN ISO 14577-4:2007-08
DIN 30910-4:2004 Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts

Standards Norway

NS-EN 3718:2012 Aerospace series — Test method for metallic materials — Ultrasonic inspection of tubes
NS-EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985)
NS-EN 13479:2017 Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials
NS 10001:1987 Metallic materials — Terminology
NS-EN 10235:1993 Metallic materials — Tube — Flanging test
NS-EN 10236:1993 Metallic materials — Tube — Ring expanding test
NS-EN 10233:1993 Metallic materials — Tube — Flattening test
NS 1189:1964 Metal plating — Testing of the adherence of metallic coatings on metallic materials

Association of German Mechanical Engineers

DVS 2301-1971 Guidelines for the thermal spraying of metallic and non-metallic materials
DVS 2301-1987 Thermal spraying processes for metallic and non-metallic materials
DVS 2301-2009 Thermal spraying processes for metallic and non-metallic materials
DVS 2301-2001 Thermal spraying processes for metallic and non-metallic materials

ESDU - Engineering Sciences Data Unit

TM 173-2013 Material damping of metals and alloys

Lithuanian Standards Office

LST EN 3718-2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
LST EN ISO 7799:2001 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985)
LST EN 13479-2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials

GCC Standardization Organization

GSO ISO 20482:2013 Metallic materials -- Sheet and strip -- Erichsen cupping test
BH GSO ASTM E213:2024 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
GSO ISO 16630:2010 Metallic materials -- Sheet and strip -- Hole expanding test
GSO ISO 14577-4:2014 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings
GSO ISO 7802:2016 Metallic materials -- Wire -- Wrapping test
GSO ISO 8493:2015 Metallic materials -- Tube -- Drift-expanding test
GSO ISO 8492:2016 Metallic materials -- Tube -- Flattening test

SE-SIS

SIS SS 11 23 88-1979 Metallic materials — Uniaxial fatigue test pieces from flat products with thickness exceeding 12 mm — Type UP
SIS SS 11 26 58-1983 Metallic materials - Wire - Wrapping test
MNC 80 E-1986 Powder metallurgicai materials - Sintered metal materials - Summary
MNC 80-1986 Powder metallurgical materials — Sintered meta/ materia/s - Summary
SIS 11 26 42-1967 Flanging test on tubes
MNC 80 E-1983 Powder metallurgical materials - Sintered metal materials - Summary
MNC 80-1983 Powder metallurgical materials - Sintered meta/ materia/s
SIS SS 11 26 22-1983 Metallic materials - Wire - Reverse bend test
MNC 60-1981 Ferroalloys, meta/s and oxides - Alloying materials
SIS SS 11 26 42-1986 Metallic materials - Tubes - Flanging test
MNC O-1987 Metallic materials — List of summaries and handbooks
SIS SS 11 23 19-1982 Metalic materials — Test piece for testing metals at elevated temperatures

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 3718-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Tubes (Edition P 1)

Canadian Standards Association (CSA)

CSA W48-2023 Filler metals and allied materials for metal arc welding
CSA W48-2006(R2011) Filler Metals and Allied Materials for Metal Arc Welding
CAN/CSA-W48-2001(R2006) Filler Metals and Allied Materials for Metal Arc Welding
CSA W48-2014 Filler metals and allied materials for metal arc welding

IT-UNI

UNI 3667-1968 Corrosion of metallic materials. Corrosion conditions and factors for metallic materials in conctat with solutions.
UNI 556-P5-1978 Mechanical testing of metal materials. Tensile test. Sintered metal material samples
UNI 3668-1968 Corrosion of metallic materials. Corrosion conditions and factors for metallic materials in contact with damp solids.
EC 1-2020 UNI EN ISO 8495:2020 Metallic materials - Tube - Ring-expanding test

Military Standards (MIL-STD)

MIL MIL-E-17568C-1980 EMBROIDERY MATERIALS, METALLIC AND SYNTHETIC METALLIC (SUPERSEDING MIL-E-17568B)

CEN - European Committee for Standardization

EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
EN ISO 8492:2004 Metallic materials - Tube - Flattening test

Defense Logistics Agency

DLA A-A-52047 D-2013 TUBING, NONMETALLIC (RUBBER AND PLASTIC)
DLA A-A-50227 VALID NOTICE 3-2007 T-SQUARES (METAL, WOOD, AND PLASTIC)
DLA A-A-50227 VALID NOTICE 1-1993 T-SQUARES (METAL, WOOD, AND PLASTIC)
DLA A-A-50227 VALID NOTICE 2-2001 T-SQUARES (METAL, WOOD, AND PLASTIC)
DLA A-A-50227-1986 T-SQUARES (METAL, WOOD, AND PLASTIC)

RO-ASRO

STAS SR EN 23312-1995 Sintered metal materials and hardmetals. Determination of Young modulus
STAS 6638-1987 Metals tcsting HIGH TEmpEratuResTEns1lE tEst of mEtaiLEc matEriat.s
STAS SR EN 23369-1995 Impermeable sintered metal materials and hardmetals. Determination of density

European Committee for Standardization (CEN)

EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
EN ISO 8492:2013 Metallic materials - Tube - Flattening test
EN ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings

GM North America

GM GM6100M-1989 Non-Metallic Gasket Materials

UNKNOWN

YB 4085-92 Metal material strapping machine
YB 4085-1992 Metal material strapping machine

CZ-CSN

CSN ISO 7802:1994 Metallic materials. Wire. Wrapping test
CSN ISO 10113:1994 Metallic materials.Sheet and strips.Determination of plastic strain ratio

Society of Automotive Engineers (SAE)

SAE AIR 4844D-2024 Composites and Metal Bonding Glossary
SAE AMS 2628C-2024 Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets
SAE AMS2628C-2024 Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets
SAE AIR4844D-2024 Composites and Metal Bonding Glossary