dust test

dust test, Total:100 items.

The international standard classification for "dust test" includes: Pulps , Paper and board , Ventilation and air-conditioning systems , Coated fabrics , Optical measuring instruments .

The Chinese standard classification for "dust test" includes: Papermaking in general , Heat supply and heating engineering , Half finished chemical fibre products , Chemical Measurement .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6167-2007 Methods for testing the performance of airborne particle counter
GB/T 6167.1-1985 Methods for testing the performance of dust particle counter--Calibration for sizing particle
GB/T 1541-2013 Paper and board—Determination of dirt
GB/T 10740-2002 - Estimation of dirt and shives
GB/T 6167.2-1985 Methods for testing the performance of dust particle counter; Particle concentration
GB/T 1541-1989 Paper and board - Determination of dirt
GB/T 1541-2007 Paper and board—Determination of dirt

Group Standards of the People's Republic of China

T/SCIAC 001-2021 Dust Particle Counter
T/GDRPA 21-2025 Nuclear radiation protective suit Radiative dust protective suit

National Metrological Verification Regulations of the People's Republic of China

JJG 547-1988 Dust Particles Counter

Professional Standard - Textile

FZ/T 50010.8-2023 Pulpboard for regenerated cellulose fiber-Determination of dirt degree
FZ/T 50010.8-1998 Pulp board for viscose fiber - Determination of dirt

National Metrological Technical Specifications of the People's Republic of China

JJF 1190-2008 Calibration Specification for Airborne Particle Counter

Military Standard of the People's Republic of China-General Armament Department

GJB/J 5416-2005 Calibration procedures for dust particle counters

Taiwan Provincial Standard of the People's Republic of China

CNS 11573-1986 Method of Test for Low Frequency (Below 3MHz) Electrical Connectors (TP-50 Sand and Dust Test)

Japanese Industrial Standards Committee (JISC)

JIS Z 4316:1995 Radioactive dust monitors
JIS Z 4601:2009 Radioactive dust samplers
JIS B 9910:1994(2001) Method of measuring performance for dust collectors
JIS Z 8810:1979 Electrostatic dust sampler and measuring method for mass of airborne dust by the electrostatic dust sampler
JIS Z 8808:2013 Methods of measuring dust concentration in flue gas
JIS Z 4601:1997 Radioactive dust samplers
JIS Z 8808:1995 Methods of measuring dust concentration in flue gas
JIS P 8208:1976(1994) Method of Testing Dirt, Shives and Specks of Paper Pulp
JIS B 9926:1991 Clean room -- Test methods for dust generation from moving mechanisms

Yugoslav Association for Standardization

JUS H.N8.204-1980 Testing ofpaper and paperboard. Determination ofdirt
JUS H.N8.188-1991 Cellulose ASSESSMENT OF IMPURITIES AND CHIPS IN BLEACHED CELLULOSE

Federal Institute for Occupational Safety and Health

TRGS 559:2010-02 Dust from mineral substances

Korean Agency for Technology and Standards (KATS)

KS K 2103-2010 Filter fabrics for dust collection
KS A 4422-2022 Radioactive dust samplers
KS A 0079-2024 General rule of measuring methods for airborne dust concentration in environmental atmosphere
KS C IEC 61241-2-1:2003 Electrical apparatus for use in the presence of combustible dust-Test methods for determining the minimum ignition temperature of dust
KS B ISO 9022-6:2017 Optics and optical instruments － Environmental test methods － Part 6: Dust
KS B ISO 9022-6:2002 Optics and optical instruments － Environmental test methods － Part 6: Dust
KS L ISO 21951:2013 Coated abrasives－Plain discs with holes for dust extraction
KS L ISO 21951:2004 Coated abrasives-Plain discs with holes for dust extraction

European Committee for Standardization (CEN)

EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds
EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds
EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations
EN 15188:2020 Determination of the spontaneous ignition behaviour of dust accumulations

American Society for Testing and Materials (ASTM)

ASTM D5050-08 Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
ASTM D5050-96 Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
ASTM D5050-96(2002) Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
ASTM E1515-03 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM E2021-01 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-06 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-15 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E1973-99 Surface dust air collection method
ASTM E2021-00 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-09(2013) Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E1515-14 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM E2021-09 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers

Swedish Institute for Standards

SIS SMS 2845-1975 Dust separating. Calibration of dust classifiers
SIS SS 2845-1984 Dust separating - Calibration of dust classifiers
SIS SMS 2846-1975 Dust separating. Settling r?te analysis with dust classifier
SS-EN 61300-2-27:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow

Indonesia Standards

SNI 15-4936-1998 Test method for refractory bricks, high alumina types and chamote types
SNI 7325-2009 Method for detecting respirable dust content in the air of single-person workplace

British Standards Institution (BSI)

BS EN 15188:2007 Determination of spontaneous ignition properties of dust accumulations
BS EN 15188:2020 Determination of the spontaneous ignition behaviour of dust accumulations
BS EN 45510-4-8:2000 Guide for the procurement of power station equipment. Boiler auxiliaries. Dust handling plant. Section 8: Dust handling
BS EN 50281-3:2002 Electrical apparatus for use in the presence of combustible dust - Classification of areas where combustible dusts are or may be present
BS 1747-5:1972 Methods for the measurement of air pollution - Directional dust gauges
BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems

German Institute for Standardization

DIN EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations; English version of DIN EN 15188:2007-11
DIN ISO 9022-6 E:2015-02 Optics and photonics - Environmental test methods - Part 6: Dust
DIN ISO 9022-6:1999 Optics and optical instruments - Environmental test methods - Part 6: Dust (ISO 9022-6:1994)
DIN EN 14034-1:2011-04 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure p<(Index)max> of dust clouds; German version EN 14034-1:2004+A1:2011
DIN ISO 21951:2001 Coated abrasives - Plain discs with holes for dust extraction (ISO 21951:2001)
DIN ISO 9022-6:2015 Optics and photonics - Environmental test methods - Part 6: Dust (ISO 9022-6:2015)

Bureau of Indian Standards

IS 6213-16-1978 Methods of test for pulp: Part 16 Dirt count
IS 5182 Pt.1-1969 Air pollution part Ⅰ Measurement method of dust fall
IS 10236-13-1986 Procedure for basic climatic and durability test for optical instruments:Part 13 Dust test

Association Francaise de Normalisation

NF S66-203*NF EN 15188:2020 Determination of the spontaneous ignition behaviour of dust accumulations
NF S66-203:2007 Determination of the spontaneous ignition behaviour of dust accumulations.
NF S66-200-1/IN1*NF EN 14034-1/IN1:2011 Determination of explosion characteristics of dust clouds - Part 1 : determination of the maximum explosion pressure Pmax dust clouds

Vertrauen durch Sicherheit

VDS:3445 Guideline for damage prevention Fire protection in dust extraction systems

Association of German Mechanical Engineers

VDI 3954 Blatt 1-2019 Effects of particles on technical products - Characteristics of test dusts for product qualification (Fundamentals)
VDI 4320 BLATT 2-2012 Measurement of atmospheric deposits — Determination of dust precipitation using the Bergerhoff method
VDI 2263 Blatt 5-1-2014 Dust fire and dust explosion hazard assessment and protection measures
VDI 2066 Blatt 1-2021 Particle measurement Dust measurement in flowing gas Quality determination
VDI 4320 BLATT 2-2012 Measurement of atmospheric deposits — Determination of dust precipitation using the Bergerhoff method

GCC Standardization Organization

GSO ISO 20905:2013 Coal preparation - Determination of dust/moisture relationship for coal

National Standardisation Body (ASRO)

STAS 8871/4-1973 Electric vacuum cleaners for household use. METHODS FOR MEASURING THE PERFORMANCE. Measurement of dust retention performance

GM North America

GM GM9627P-1997 Method for Fiberglass Insulation Fallout Measurement

International Electrotechnical Commission (IEC)

IEC 63241-2-17:2025 Electric motor-operated tools – Dust measurement procedure – Part 2-17: Particular requirements for hand-held routers and trimmers
IEC 63241-3-1:2025 Electric motor-operated tools – Dust measurement procedure – Particular requirements for transportable table saws

International Organization for Standardization (ISO)

ISO 9022-6:2015 Optics and photonics - Environmental test methods - Part 6: Dust
ISO 9022-6:1994 Optics and optical instruments - Environmental test methods - Part 6: Dust
ISO 5350-1:1998 Pulp - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets

Polski Komitet Normalizacyjny (PKN)

PN Z04097 Arkusz 04-1974 Air purity protection Tests for size composition of dust Determination of weight particie size of dust with the aid of sedimentation pipette
PN Z04002 Arkusz 05-1974 Air purity protection Tests of dust physical properties Determination of average porosity and average kinecic size of dust particles
PN Z04097 Arkusz 07-1974 Air purity protection Tests for size composition of dust Sieve analysis
PN Z04002 Arkusz 03-1974 Air purity protection Tests of dust physical properties Determination of average mass and average statical volumetric size of dust particles
PN Z04097 Arkusz 06-1974 Air purity protection Tests for size composition of dust Determination of particie size of dust with the aid of rotary separator
PN M34131-1991 Thermal energy. Mill installations. Drawing of dust samples

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 61300-2-27:2024 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust (laminar flow)
EN 60068-2-68:1996 Environmental Testing Part 2: Tests Test L: Dust and Sand

Gosstandart of Russia

GOST R EN 13205-2010 Workplace atmospheres. Assessment of performance of instruments for measurement of airborne particle concentrations
GOST 17.2.4.05-1983 Nature protection. Atmosphere. Gravimetric method for determination of suspended dust particles

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0740-632-2-6 A1 E*DIN EN 50632-2-6 A1:2019-07 Electric motor-operated tools — Dust measurement procedure — Part 2-6: Particular requirements for hammers