Fluoroplastics

Fluoroplastics, Total:101 items.

The international standard classification for "Fluoroplastics" includes: Equipment for the chemical industry , Valves , Seals, glands .

The Chinese standard classification for "Fluoroplastics" includes: Pipe fittings, clamps and seals , Mechanical gadgets and components , Non-metal chemical machinery equipment , Valve , Sealing and sealing device , Micro and copier machinery .

Professional Standard - Aviation

HB 8107-2002 Metal fluoroplastics bush with flange
HB 8106-2002 Bush for metal fluoroplastics
HB 8108-2002 Specification for metal fluoroplastics bush

Professional Standard - Chemical Industry

HG/T 3215-1986 Polytrifluoromonochlorethylene plastic - Lined stop valve
HG/T 3704-2003 General specification for valves lined with fluoroplastics
HG/T 3915-2006 Reacting caldron lined with fluoroplastics

Taiwan Provincial Standard of the People's Republic of China

CNS 10510-1983 Polytetrafluoroethylene Tapes
CNS 10511-1983 Polytetrafluoroethylene Sheets

Group Standards of the People's Republic of China

T/CPCIF 0339-2024 Hydrofluoric acid by-product of incineration of organic fluorine chemical industry
T/ZZB 1837-2020 Stainless steel ball valves for lining fluoroplastic

Professional Standard - Machinery

JB/T 11488-2013 Liner Fluoroplatics for Steel Gate Valve
JB/T 9447-2015 Specifications for coated polytetrafluoroethylene fusing heat roller of electrostatic copying machines
JB/T 10706-2007 Rubber O-ring coated fluoride plastic for mechanical seal
JB/T 14506-2023 Environmental protection equipment —Fluoroplastics flue gas-gas heat exchanger
JB/T 14507-2023 Environmental protection equipment —Fluoroplastics flue gas-water heat exchanger
JB/T 9447-1999 Fluorine Coated Plastic Fixing Roller for Xerographic Printer - Technical Conditions
JB/T 10706-2022 Rubber O-ring coated fluoride plastic for mechanical seal
JB/T 14505-2023 Environmental protection equipment —Fluoroplastics tube heat exchanger

Military Standard of the People's Republic of China-General Armament Department

GJB 9897-2020 Specification for wear-resistant fluoroplastic sheets

工业和信息化部

SJ/T 11799-2022 Fluoroplastic films used in backsheets of photovoltaic module
JB/T 14312-2022 Fluoroplastics lined for flanged steel ball valves

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1450-2012 Fluoroplastic insulated wire and cable technical specifications

CH-SNV

SN 214 062/4-1988 Textiles — Tests for colour fastnessSection P01: Colour fastness to dry heat (excluding pressing)
VSM 14032.3-1944 Plastic (organic plastic) material testing
SEV 4008-1965 Textiles — Tests for colour fastness Section N02: Colour fastness to bleaching: Peroxide
SN ISO 105/X06:1984 Plastic (organic plastic) material testing
SNV 24624-1938 Plastic (organic plastic) material testing
SNV 742 402.19-1970 Comparative summary of plastics (organic plastics). film
SNV 95825-1950 Plastic (organic plastic) material testing. Pull test
SNV 40807 a-1959 Comparative summary of plastics (organic plastics), laminates
VSM 10856.2-1943 Plastic (organic plastic) material testing. Water absorbency regulations
SN ISO 105/Z01:1984 Textiles — Tests for colour fastnessSection X01: Colour fastness to carbonizing: Aluminium Chloride
SNV 742 401.6-1971 Plastic (organic plastic) material testing. Liquid-proof properties specified
VSM 12751-1972 Comparative summary of plastics (organic plastics). Hardened form casting
SNV 93100-1966 Plastic (organic plastic) material testing. Complies with Vicat’s thermoplastic softening temperature regulations
SN 010 130-1981 Business letter
VSM 10691-1935 Plastic (organic plastic) material testing. Determine molding mix inflation coefficient
SN 198 421-1984 Measurement of thickness of textile fabrics
SEV 191 d-1950 Plastic (organic plastic) material testing. Filler density requirements for molding mixes
SEV 1003-1959 Plastic (organic plastic) material testing. Bulk density requirements for molding mixes
VSM 34503-1937 Plastic (organic plastic) material testing. Marking index requirements and marking resistance assessment
SN ISO 9003:1988 Quality Systems - Model for quality assurance in final inspection and test
VSM 18642-1964 Plastic (organic plastic) laminates, flat sheets VSM 77200 Type marking and material properties on page 8
VSM 77119-1965 Plastic (organic plastic) material testing. Complies with Martens thermal environment dimensional stability regulations

Danish Standards Foundation

DS/ISO 17088:2021 Plastics – Organic recycling – Specifications for compostable plastics

GSO

GSO ISO 17088:2023 Plastics — Organic recycling — Specifications for compostable plastics
BH GSO ISO 17088:2023 Plastics — Organic recycling — Specifications for compostable plastics
GSO ISO 15014:2009 Plastics - Extruded sheets of poly (vinylidene fluoride) (PVDF) - Requirements and test methods

SCC

DANSK DS/ISO 17088:2021 Plastics – Organic recycling – Specifications for compostable plastics
HOLDEN HN 1410-2001 Polytetrafluoro Ethylene Thermo Plastic Compound
CSA C1321-1983 Guide for the Investigation of Seal Materials Polytetrafluoroethulene Plastic Tape
BS ISO 3865:1997 Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material

British Standards Institution (BSI)

BS ISO 17088:2021 Plastics. Organic recycling. Specifications for compostable plastics
20/30370141 DC BS ISO 17088. Plastics. Organic recycling. Specifications for compostable plastics
BS EN ISO 12086-1:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Designation system and basis for specifications

RU-GOST R

GOST 14906-1977 Fluoroplastic-4D. Specifications
GOST 13744-1987 Fluoroplast-3. Specifications
GOST 10007-1980 Polytetrafluoroethylene. Specifications
GOST 25428-1982 Fluoroplast-42. Specifications
GOST 23820-1979 Fluoroplastic sealing devices with corrugated springs for pistons. Fluoroplastic rings. Construction and dimensions
GOST 24222-1980 Film and tape from polytetrafluorethylene. Specifications

GOSTR

GOST 17622-1972 Industrial organic plastic. Specifications

US-FCR

FCR FED PS47-71-1971 HEAT-SHRINKABLE FLUOROCARBON PLASTIC TUBING
FCR FED PS43-71-1971 FLUORINATED ETHYLENE-PROPYLENE (FEP) PLASTIC TUBING
FCR 40 CFR PART 414-2015 ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS
FCR 40 CFR PART 414-2012 ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS

United States Navy

NAVY MIL-P-85891 A (2)-1998 PLASTIC MEDIA FOR REMOVAL OF ORGANIC COATINGS
NAVY MIL-P-85891 A-1992 PLASTIC MEDIA FOR REMOVAL OF ORGANIC COATINGS
NAVY MIL-P-85891 A (3)-2000 PLASTIC MEDIA FOR REMOVAL OF ORGANIC COATINGS

U.S. Military Regulations and Norms

ARMY L-P-1040 B NOTICE 1-2013 PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE)
ARMY L-P-1040 B-1977 PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE)

American National Standards Institute （ANSI)

ANSI/ASTM D3307:2001 PFA-Fluorocarbon Molding and Extrusion Materials, Specification for (08.03)
ANSI/ASTM D3275:2000 Specification for E-CTFE-Fluoropolymer Molding and Extrusion Materials (08.03)
ANSI/ASTM D3159:1998 Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials (08.03)
ANSI/ASTM D6314:1998 Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials

GM North America

GM 9985664-1992 Grease, Silicone, Fluorocarbon Filled Revision A
GM 9985157-1980 Sealer Limited-Flow, Self-Leveling, Plastisol
GM GM9323P-1991 Absorptivity of Hydrocarbons on Fluorinated Plastic Surfaces

TH-TISI

TIS 997-2011 Plastic containers for organic acid food
TIS 2490-2011 Plastic films for organic acid food drinking water

General Motors Corporation (GM)

GM 9985493-1989 Grease, Silicone, Fluorocarbon Filled

Japanese Industrial Standards Committee (JISC)

JIS K 6883:2008 Plastics -- Perfluoroalkoxyalkane (PFA) tubes
JIS K 6894:1996 Fluoroplastic coating film on metal substrate

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 414-2009 ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS

PL-PKN

PN C88010-1991 Organo-tin stabilizers for plastics.Ergoterm OTGO,OTGO-S,OTGO-T

SAE - SAE International

SAE AMS3653-1957 PLASTIC TUBING@ ELECTRICAL INSULATION Polytetrafluoroethylene
SAE AS5729A-2016 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL

ES-AENOR

UNE 53 072 Determination of refractive index of organic transparent plastics

American Society for Testing and Materials (ASTM)

ASTM D3275-00 Standard Classification for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM D3159-10 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
ASTM D3307-10 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
ASTM D3275-18(2023) Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM D542-00(2006) Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM D542-13 Standard Test Method for Index of Refraction of Transparent Organic Plastics

Korean Agency for Technology and Standards (KATS)

KS M 3352-1980 Polytetrafluoroethylene powder for molding and extrusion materials
KS M 1995-2009(2014) Determination of organic compounds emitted from plastics－Gas chromatographic method

Society of Automotive Engineers (SAE)

SAE AS5729-2011 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL

International Organization for Standardization (ISO)

ISO 6427:1992 Plastics; determination of matter extractable by organic solvents (conventional methods)
ISO 6427:2013 Plastics - Determination of matter extractable by organic solvents (conventional methods)
ISO 3865:2020 Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material

Underwriters Laboratories (UL)

UL SUBJECT 1321-2013 OUTLINE OF INVESTIGATION FOR POLYTETRAFLUOROETHYLENE PLASTIC SEAL MATERIALS (Issue 6)