inter-assay relative range

inter-assay relative range, Total:142 items.

The international standard classification for "inter-assay relative range" includes: Manufacturing forming processes , Iron and steel castings , Limits and fits , Metric screw threads , Sewing machines and other equipment for the clothing industry , Horology in general , Screw threads in general .

The Chinese standard classification for "inter-assay relative range" includes: Forging and pressing , Basic standards and general methods , Basic standards and general methods for dye , Sewing machine , Horology , Technical management .

Professional Standard - Textile

FZ/T 90009-1991 General tolerance Limit deviation of untolerated dimensions

Professional Standard - Aerospace

QJ 771-1983 Limit deviation of dimensions without tolerance

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15055-1994 Permissible stamping varitions in dimensions without tolerance indication
GB/T 15055-2007 Permissible stamping variations in dimenstions without tolerance indication
GB/T 2516-2003 General purpose metric screw threads—Limit devications
GB/T 2516-2023 General purpose metric screw threads—Limit deviations
GB/T 1800.4-1999 Limits and fits Tables of STANDARD tolerance grades and limit deviations for holes and shafts
GB/T 6688-2008 Dyestuffs - Determination of relative strength and color difference - Instrumental method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 15055-2021 Permissible stamping variations in dimensions without tolerance indication

National Metrological Verification Regulations of the People's Republic of China

JJG 1110-2023 Measuring Rulers for Difference of Wheels Set Position and of Brake Discs Set Position of the Wheelsets for Railway
JJG(铁道) 123-2005 Measuring Ruler for Difference of Wheels Set Position and Brake Discs Set Position of Railway Vehciles

Professional Standard - Light Industry

QB/T 1512-2011 Sewing machine partsSize limit of not note tolerances
QB/T 2267-2015 Limits and fits for timekeeping instruments―Standard tolerance value of inserted middle tolerance grade for nominal size up to 18mm
QB/T 1512-1992 Limit Deviation of Sewing Machine Parts without Tolerance Dimensions

Professional Standard - Military and Civilian Products

WJ 1707-1987 Limit Deviation of Non-Tolerance Angle of Cold Stamping Parts

Professional Standard - Machinery

JB/T 4381-1999 Permissible limit deviation in dimensions without tolerance indication for shearing of metal plates
JB/T 4381-2011 Permissible limit deviation in dimensionswithout tolerance indication for shearing of metal plate

Professional Standard - Automobile

QC/T 266-1999 Extreme deviation for undeclared tolerance size of automobile parts - General requirements
QC/T 270-1999 Limit deviation of dimensions of forged parts of automobile die without tolerance indicated
QC/T 29017-1991 Automotive molded plastic parts without individual tolerance limit the size of the deviation
QC/T 269-2023 Permissible automobile casting variations in dimensions without tolerance indication
QC/T 267-2023 Permissible cutting parts variations in dimensions without tolerance indication
QC/T 268-2023 Permissible automobile cold stamping variations in dimensions without tolerance indication
QC/T 269-1999 Limit deviation of dimensions of automobile parts without tolerance indicated
QC/T 29017-2023 Permissible automotive molded plastic parts variations in dimensions without tolerance indication
QC/T 29087-2023 Permissible welding variation in dimensions without tolerance indication
QCn 29017-1991 Limit deviations of untolerated dimensions for automotive molded plastic parts
QC/T 268-1999 Extreme deviation for undeclared tolerance size of processing parts for automobile cold stamping
QC/T 29087-1992 Extreme deviation for undeclared tolerance size of automobile welding processing parts
QC/T 267-1999 Extreme deviation for undeclared tolerance size of automobile machining parts

Professional Standard - Railway

TB 347-1985 Limit deviation of communication signal products without tolerance dimensions
TB/T 2250-1991 Limit Deviations of Non-Tolerance Dimensions for Welded Structures of Rolling Stock

Taiwan Provincial Standard of the People's Republic of China

CNS 8879-1983 Interval Estimation of the Difference Between Two Population Means(Standard Deviations Known)
CNS 8880-1983 Interval Estimation of the Difference Between Two Population Means (Standard Deviations Known)

Professional Standard - Electron

SJ/T 10731-1996 Tolerances for regular clearance screw threads

SE-SIS

SIS 05 02 13-1974 Tolerances for building. Interaction among tolerances

Spanish Association for Standardization (UNE)

UNE 66053:1978 ESTIMATION OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT
UNE 66047:1978 ESTIMATION OF THE DIFFERENCE IN THE MEANS OF TWO LOTS (KNOW VARIANCES)
UNE 66054:1978 COMPARISON OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT WITH A GIVEN VALUE
UNE 66052:1978 COMPARISON OF THE MEANS OF TWO LOTS (VARIANCES UNKNOWN, BUT MAY BE ASSUMED EQUAL)
UNE 66058:1978 DETERMINATION OF A STATISCAL TOLERANCE INTERVAL

CZ-CSN

CSN 01 4347-1964 Matching of threads Limit deviations of Whitworth bolts threads
CSN 65 0320-1966 Limit gap
CSN 01 4346-1964 Matching of threads. Limit deviations of Whitworth nut threads
CSN 01 4332-1962 Matching of threads. Limit deviationa of matric threads of bolts Sn
CSN 01 4312-1962 Matching of threads. Limit deviationa of minor diameter of bolt thread
CSN 01 4325-1962 Matching of threads. Limit deviations of nut metric threads of fits SH
CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics
CSN 01 4328-1962 Matching of threads. Limit deviation of metric threads of bolts So 8
CSN 01 4333-1962 Matching of threads. Limit devialions of metric threads of bolts Sp
CSN 01 4330-1962 Matching of threads. Limit deviationa of metric threeds of bolts S
CSN 01 4329-1962 Matching of threads. Limit deviations of metric threads of bolts Sd 8
CSN 01 4327-1962 Matching of threada. Limit deviations of outaide metrio threads of bolts Sh
CSN 01 4201-1989 Unified system of limits and fits CMEA. General regulations, tole-rances, fundamental deviations

National Aeronautics and Space Administration (NASA)

NASA NPD 9710.1 REV T-2004 DELEGATION OF AUTHORITY-TO AUTHORIZE OR APPROVE TEMPORARY DUTY TRAVEL ON OFFICIAL BUSINESS AND RELATED MATTERS

YU-JUS

JUS K.F1.006-1990 Bonded abrasive products. Limit deviations and run-out tolerances
JUS U.A9.012-1985 Tolerances for building. Determination ofgap widths in accordance vvith si?e of tolerances

German Institute for Standardization

DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN ISO 13942 E:2019-12 Bonded abrasive products - Limit deviations and run-out tolerances
DIN ISO 13942:2020-11 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2019)
DIN-Fachbericht CEN/TR 14980:2005 Solid recovered fuels - Report on relative difference between biodegradable and biogenic fraction of SRF
DIN ISO 13942:2020 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2019)
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN 58700-1:1971 ISO-limits and fits; selection of tolerance zones for fine-mechanics, tolerance zones, nominal deviations
DIN ISO 965-3:2021-01 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO/DIS 965-3:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as replacement for DIN ISO 965-3 (1999-11).
DIN 58700-1:1978 ISO-limits and fits; selection of tolerance zones for fine-mechanics, tolerance zones, nominal deviations

SCC

BS 4500-1:1969 ISO limits and fits-General, tolerances and deviations
BS ISO 13942:2000 Bonded abrasive products. Limit deviations and run-out tolerances
BS 969:1941 Tolerances for plain limit gauges
BS EN 20286-2:1993 ISO system of limits and fits-ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
DANSK DS/EN ISO 6284:1999 Construction drawings – Indication of limit deviations
NS-ISO 286-2:1988 ISO-system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviation for holes and shafts
08/30177723 DC BS 969. Specification for limits and tolerances on plain limit gauges

Institute of Electrical and Electronics Engineers (IEEE)

IEEE PC37.103/D7.0, April 2015 IEEE Approved Draft Guide for Differential and Polarizing Relay Circuit Testing

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3933-1996 Effects of Surrounding Spaces on Rooms Pressurized by Differential Flow Control

British Standards Institution (BSI)

BS ISO 965-3:2021 ISO general purpose metric screw threads. Tolerances. Limit deviations for screw threads
BS ISO 13942:2019 Bonded abrasive products. Limit deviations and run-out tolerances
BS ISO 13942:2003 Bonded abrasive products - Limit deviations and run-out tolerances
BS 969:1982 Specification for limits and tolerances on plain limit gauges
BS EN ISO 6284:1999(2000) Construction drawings — Indication of limit deviations
BS 969:2008 Specification for limits and tolerances on plain limit gauges
BS 1916-3:2009 Limits and fits for engineering. Guide to tolerances, limits and fits for large diameters
BS EN 20286-2:1993(2002) ISO system of limits and fits — Part 2 : Tables of standard tolerance grades and limit deviations for holes and shafts

Association Francaise de Normalisation

NF ISO 13942:2019 Bonded abrasive products - Limit deviations and runout tolerances
NF E75-215*NF ISO 13942:2019 Bonded abrasive products - Limit deviations and run-out tolerances
NF E02-100-1:1993 Iso system of limits and fits. Part 1 : bases of tolerances, deviations and fits.
NF E75-215:2001 Bonded abrasive products - Limit deviations and run-out tolerances.
NF L05-222:1990 Aircraft industry. ISO M thread. Limiting profiles and tolerances (so-called "BNAE tolerances").

Japanese Industrial Standards Committee (JISC)

JIS R 6244:2005 Bonded abrasive products -- Limit deviations and run-out tolerances
JIS R 6244:2022 Bonded abrasive products -- Limit deviations and run-out tolerances
JIS B 7421:1971 Tolerances allowable deviations and permissible wears of limit gauges
JIS R 6244 AMD 1:2013 Bonded abrasive products -- Limit deviations and run-out tolerances (Amendment 1)
JIS Z 9052:1963 Interval estimation of the difference between two population means (standard deviations known)
JIS Z 9053:1963 Interval estimation of the difference between two population means (standard deviations unknown)
JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)

International Organization for Standardization (ISO)

ISO 13942:2000 Bonded abrasive products - Limit deviations and run-out tolerances
ISO 4464:1980 Tolerances for building; Relationship between the different types of deviations and tolerances used for specification
ISO 965-3:2021 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads

GSO

BH GSO ISO 13942:2016 Bonded abrasive products -- Limit deviations and run-out tolerances
OS GSO ISO 13942:2014 Bonded abrasive products -- Limit deviations and run-out tolerances
BH GSO ISO 965-3:2023 ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads
BH GSO ISO 6284:2016 Construction drawings -- Indication of limit deviations
GSO ISO 965-3:2023 ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads
OS GSO ISO 286-2:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

Korean Agency for Technology and Standards (KATS)

KS B 5211-2021 Tolerances, allowable deviations and permissible wears of limit gauges
KS B 5211-2001(2021) Tolerances, allowable deviations and permissible wears of limit gauges
KS B 5211-2001(2016) Tolerances, allowable deviations and permissible wears of limit gauges
KS A 3262-1986 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS A 3262-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS A 3263-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEIVATIONS UNKNOWN)
KS B ISO 2768-2-2014(2019) General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
KS A 3268-1985 INTERVAL ESTIMATION OF THE POPULATION VARIANCE
KS A 3269-1985 INTERVAL ESTIMATION OF THE POPULATION VARIANCE

RU-GOST R

GOST R 55869-2013 Solid recovered fuels. Report on relative difference between biodegradable and biogenic fractions of SRF
GOST 23542-1979 Cables and wire bundles for device connections. Series of length limit deviations

Standard Association of Australia （SAA）

AS B195:1962 Plain limit gauges limits and tolerances
AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts
AS 1654.1:1995 ISO system of limits and fits - Bases of tolerances, deviations and fits
AS B88:1941 Dimensions, limits and tolerances for screwing taps
AS B88:1944 Dimensions, limits and tolerances for screwing taps

BE-NBN

NBN 105-1948 Axis limit gauge deviation
NBN-ISO 4464:1992 Tolerances for building - Relationship between the different types of deviations and tolerances used for specification
NBN 106-1948 Limit gauge deviation for boring

AT-ON

ONORM ISO 286 Teil.1:1990 ISO System oflimits andfits; bases of tolerances, deviations andfits
ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts
ONORM M 1302 Teil.5-1986 Tolerances and flts; general, tolerances and limits for sizes above 10000 mm to 25000 mm
ONORM M 1302 Teil.4-1983 Tolerances and?ts; general, tolerances and limits for dimensions from 3150 mm (o 10000 mm

NL-NEN

NEN-ISO 286-1:1989 ISO-passingstelsel. Deel 1: Grondslagen van toleranties, grensmaatafwijkingen en passingen
NEN-ISO 286-2:1989 ISO-passingstelsel. Deel 2: Tabellen met standaardtolerantiekwaliteiten en grensmaatafwijkingen voor gaten en assen

VN-TCVN

TCVN 2244-1999 ISO system of limits and lits.Bases of tolerances,deviations and fits
TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts

TR-TSE

TS 1845-1975 ISO SYSTEM OF LIMTTS AND FTTS PART 1 : GENERAL, TOLERANCES AND DEVIATTONS
TS 2345-1976 RULES POR MEASUREMENT OF AZIMUTH ?N TRIANGULATION ETWORKS BY MEANS OF POLE—STAR AND ACCEPTABLE RROR LIMITS

Danish Standards Foundation

DS 2370-2:1996 Measuring equipment - Limit gauges - Part 2: Gap gauges and reference gauges for ISO-tolerances for 1-500 mm nominal size. Manufacturing tolerances and allowed deviations
DS/EN ISO 6284:2000 Construction drawings - Indication of limit deviations

International Telecommunication Union (ITU)

ITU-T J.100 SPANISH-1990 TOLERANCES FOR TRANSMISSION TIME DIFFERENCES BETWEEN THE VISION AND SOUND COMPONENTS OF A TELEVISION SIGNAL Study Group 9
ITU-T J.100 FRENCH-1990 TOLERANCES FOR TRANSMISSION TIME DIFFERENCES BETWEEN THE VISION AND SOUND COMPONENTS OF A TELEVISION SIGNAL Study Group 9

South African Bureau of Standard

SANS 286-2:1988 ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

American National Standards Institute （ANSI)

ANSI/TIA/EIA-455-197-2000(2008) Differential Group Delay Measurement OfSingle-Mode Components and Devices by the Differential Phase Shift Method

Others: Relative range between batches,inter-assay relative range,inter-assay relative range,inter-assay relative range,Very poor inter-assay difference,Use the range to calculate the difference between batches,Relative range sign between batches,inter-assay relative range,Relative range,Inter-batch difference