Styrene detection

Styrene detection, Total:368 items.

The international standard classification for "Styrene detection" includes: Occupational safety. Industrial hygiene , Raw materials for rubber and plastics , Plastics , Adhesives , Aromatic hydrocarbons , Rubber , Thermoplastic materials , Plastics in general , Ambient atmospheres , food products in general , Latex and raw rubber , Essential oils , Plastics pipes, fittings and valves .

The Chinese standard classification for "Styrene detection" includes: Labor sanitation , Synthetic resin and plastic , Adhesives , Basic standards and general methods for synthetic resin and plastic , Basic organic chemicals , Basic standard and general method for synthetic rubber , Synthetic rubber , Analysis methods for toxic substances in atmosphere , Food sanitation , Latex products , Plastic profile , Fragrances and flavors .

中华人民共和国国家卫生和计划生育委员会

GBZ/T 300.68-2017 Determination of toxic substances in workplace air—Part 68: Styrene, methylstyrene and divinyl benzene

Taiwan Provincial Standard of the People's Republic of China

CNS 13159-1995 Method of Test for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipes for Water Works
CNS 3894-1975 Method of Test for Styrene Monomer
CNS 4013-1976 Method of Test for Polystyrene Moulding Materials
CNS 3637-1980 Phenyl Ethylene (Styrene) Monomer
CNS 13347-1994 Method of Test for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Fittings for Water Works
CNS 10351-1983 Method of Test for Synthetic Rubber Sbr
CNS 11286-1985 Method of Test for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics
CNS 2536-1992 Method of Test for Thermal Insulation Material Made of Polystyrene Foam
CNS 11337-1985 Acrylonitrile-Butadiene-Styrene (ABS) Sheets
CNS 11338-1985 Method of Test for Acrylonitrile-Butadiene-Styrene Sheets
CNS 10350-1983 Method of Test for Synthetic Rubber Sbr Latex

国家质量监督检验检疫总局

SN/T 4156-2015 Determination of divinyl benzene in the imported and exported polystyrene poke-Gas chromatography-mass spectrometry
SN/T 4471-2016 Inspection rules for import and export dangerous chemical products - Styrene

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9353-1988 Determination of residual styrene monomer in Acrylonitrile-Butadiene-Styrene(ABS) resin by gas chromatography
GB 12672-1990 Acrylonitrile-butadiene-styrene (ABS) resin
GB/T 12824-2002 Rubberm,styrene-butadiene (SBR) 1502
GB/T 3915-2011 Styrene for industrial use
GB/T 16867-1997 Determination of residual styrene monomer in polystyrene and acrylonitrile-Butadiene-Styrene resins by gas chromatography
GB/T 8657-2014 Styrene-butadiene rubber, raw―Determination of soap and organic-acid content
GB/T 14670-1993 Air quality－Determination of styrene－Gas chromatography
GB/T 27561-2011 Styrene-butadiene-styrene block copolymers(SBS) adhesives
GB/T 4614-1984 Determination of residual styrene monomer in polystyrene by gas chromatography
GB/T 12671-2008 Polystyrene (PS) resin
GB/T 5009.152-2003 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for foods pack
GB/T 12688.2-1990 Styrene for industrial use--Determination of purity--Crystallizing point method
GB 3915-1998 Styrene for industrial use
GB/T 14677-1993 Air quality. Determination of toluene, dimethyl benzene and styrene. Gas chromatography
GB/T 12688.3-2011 Test method of styrene for industrial use—Part 3:Determination of content of polymer
GB/T 30914-2014 Styrene-isoprene-butadiene rubber(SIBR)―Determination of the microstructure
GB 12671-1990 Polystyrene resin
GB/T 8658-1998 Rubber, raw styrene-butadiene, emulsion - Polymerized - Determination of bound styrene content-Refractive index method
GB/T 12672-2009 Acrylonitrile-butadiene-styrene(ABS)resin
GB/T 8657-2000 Rubber, raw styrene-butadiene - Determination of soap and organic -acid content
GB/T 17338-1998 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging
GB/T 8655-2006 Styrene - butadiene rubber (SBR) 1500

Hebei Provincial Standard of the People's Republic of China

DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

Group Standards of the People's Republic of China

T/GZPPIA 01-2018 Polystyrene buoyancy
T/CSRA 21-2022 Determination of plastic composition—Qualitative method of PE,PP,PS,PVC,EVA,PET in plastics
T/CSRA 7-2021 Limit of styrene volatilization standards for low styrene emission unsaturated polyester resin
T/NJSS 004-2023 Styrene recovery meterial for styrene butadiene rubber plant
T/JSBC 4-2020 Recycled polystyrene compound
T/SDAS 791-2024 Recycling styrene
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/CIPR 064-2022 Styrene-ethylene-ethylene-propylene block copolymer modified foam
T/ZZB 2752-2022 Styrene for polymerization-specificatioan
T/NAIA 0273-2023 divinylbenzene
T/NBSL 002-2022 Flame Retardant ABS

工业和信息化部

HG/T 5536-2019 Vinyltoluene for industrial use
HG/T 6011-2022 Powered styrene-butadiene rubber
HG/T 4999-2016 Tristyrylphenol ethoxylates

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38286-2019 Polyethylene(PE),polypropylene(PP)and polystyrene(PS)resin—Determination of peroxide value
GB/T 3915-2021 Styrene for industrial use
GB/T 8655-2019 Styrene-butadiene rubber(SBR) 1500,1502
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I)—Gas chromatography

Professional Standard - Petrochemical Industry

SH 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH/T 1502-2014 Determination of bound styrene content in styrene - butadiene rubber latez-Refractive indez method
SH/T 1592-1994 Determination for bound styrene content in tetraphene raw rubber - Nitrofication method
SH/T 1593-1994 Determination for bound styrene content in styrene butadiene latex - Nitrofication method
SH/T 1590-1994 Styrene-butadiene series impact-resistant polystyrene (SB) resin
SH/T 1626-2005 Rubber styrene-butadiene(SBR)1712
SH/T 1485.1-1995 Industrial divinylbenzene
SH/T 1539-2007 Rubber styrene-butadiene(SBR)-Determination of total extracts
SH/T 1502-1992 Determination for bound styrene content in styrene butadiene latex
SH/T 1628.6-2014 Vinyl actate for industrial use - Part 6: Determination of hydroquinone
SH 1590-1994 Anti-impact resin of styrene-butadiene series
SH/T 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials

Professional Standard - Chemical Industry

HG/T 4998~4999-2016 Oleic acid ethoxylates and tristyrylphenol ethoxylates (2016)
HG/T 3943-2007 Poly(vinyl chloride)resin-Determination of toluene content

Professional Standard - Commodity Inspection

SN/T 2889-2011 Food contact materials for export. Polymers. Determination of toluene|| ethylbenzene|| propylbenzene|| isopropylbenzene|| styrene and total volatile substances in polystyrene. Gas chromatography method
SN 0625.2-1997 Inspection rules of imported plastic scrap as raw material. Polymer scrap of ethylene|| styrene|| vinyl chloride respective and others

Professional Standard - Light Industry

QB/T 2029-1994 ABS/PVC Sheet Material
QB/T 4216-2011 Allyl phenoxyacetate
QB/T 2894-2007 Acrylonitrile-butadiene-styrene(ABS) color masterbatch

Professional Standard - Agriculture

JAP-163 Ethoxyfen detection method
SN/T 0625.2-1997 Rules for the inspection of imported waste plastics that can be used as raw materials—waste of ethylene, styrene, vinyl chloride polymers and other polymers (for trial implementation)

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 1719-2011 Determination of residual foaming agent in polystyrene foam

检验方法与规程专业（理化）

GB 31604.16-2016 National Food Safety Standard - Food Contact Materials and Articles - Determination of Styrene and Ethylbenzene

PL-PKN

PN C89068-1961 Polystyrene. Deferminafion of ?he S?yrene-con?en?s
PN BN 6041-11-1966 Polystyrene fuels and pigments. Detection method
PN BN 6113-26-1966 Styrene primer
PN C89416-1990 Plastics Determination of resistance of polystyrene and styrene copolymers to attack by trichlorofluoromethane
PN BN 6115-35-1966 artificial styrene glaze
PN C89062-1959 Polystyrene. Determination of methanol content of soluble matter
PN C89292-1971 Polystytene (homopolymer)
PN BN 6022-01-1966 Organic products. Styrene
PN C89112-01-1992 Plastics. Acrylonitryle/butadiene/styene (ABS) moulding and extrusion materials. Designation

International Organization for Standardization (ISO)

ISO/PRF 3136 Rubber latex — Styrene-butadiene — Determination of bound styrene content
ISO 2453:1975 Styrene-butadiene copolymers — Determination of bound styrene content
ISO 3136:2023 Rubber latex — Styrene-butadiene — Determination of bound styrene content
ISO 2561:2012 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:2006 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography
ISO/DIS 2561:1975 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/FDIS 2561:2023 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 5478:2006 Rubber - Determination of styrene content - Nitration method
ISO 5478:1990 Rubber; determination of styrene content; nitration method
ISO 5478:1980 Rubber — Determination of styrene content — Nitration method
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 3136:1983 Rubber latex; Styrene-butadiene; Determination of bound styrene content
ISO 3136:1975 Title missing - Legacy paper document
ISO 21561-1:2015 Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Part 1: 1H-NMR and IR with cast-film method
ISO 4655:1977 Rubber — Reinforced styrene-butadiene latex — Determination of total bound styrene content
ISO 2058:1973 Determination of volatile substances in raw styrene-butadiene rubber (SBR)

HU-MSZT

MSZ 7452-1961 Detecting soluble components in polystyrene to detect plastics
MSZ 21862/21-1980 Definition of air contaminants for gas-fired workplaces, detecting benzene; toluene; xylene; ethylbenzene and styrene
MSZ 7554-1961 Impression molding method. Quality requirements and testing of polystyrene molded by extrusion molding
MSZ 7556-1961 Impression molding method. Quality requirements and testing of polystyrene molded by extrusion molding
MSZ 2271-1988 Testing polyethylene purity

TR-TSE

TS 2610-1977 STYRENE - BUTEDIEN COPOLYMERS - DETERMINATION OF BOUND STYRENE CONTENT
TS 2492-1977 PLASTICS DETERMINATION OF RESIDUAL STYRENE MONOMER ?N POLYSTYRENE BY GAS CHROMATOGRAPHY
TS 340-1966 PLASTICS DETERMINATION OF THE PERCENTAGE OF STYRENE ?N POLYSTYRENE WITH WIJS SOLUTION
TS 3487-1980 RAW STYRENE BUTADIENE RUBBER (SBR) — DETERMINATION OF VOLATILE MATTER
TS 3486-1980 ?RAW STYRENE — BUTADIENE RUBBER (SBR) — DETERMINATION OF SOAP CONTENT-
TS 3485-1980 RAW STYKENE — BUTADIENE RUBBER — DETE MINATION OF ORGANIC ACID CONTENT.
TS 3247-1978 Sanayide Kullan?lan Stiren
TS 146-1964 PLASTICS DETERMINATION OF METHANOL-SOLUBLE MATTER ?N POLYSTYRENE

AR-IRAM

IRAM 13 310-1962 Determination of soluble styrene content in polystyrene
IRAM 1049-N.I.O.-1949 Styrene resin

Korean Agency for Technology and Standards (KATS)

KS M ISO 3136-2019 Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M ISO 3136:2009 Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M ISO 4655:2009 Rubber－Reinforced styrene-butadiene latex－Determination of total bound styrene content
KS M 3011-1990(2001) TESTING METHODS FOR POLYSTYRENES
KS M 3011-1985 TESTING METHODS FOR POLYSTYRENES
KS M 3349-2016 Styrene
KS M 3349-2011 Styrene
KS M 3349-1981 Styrene
KS M 3349-2021 Styrene
KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561-2013(2018) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561-2023 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2453-2019 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
KS M ISO 3136-2009(2019) Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M 3203-1976 POLYSTYRENE SHEETS
KS M 3203-2003 POLYSTYRENE SHEETS
KS M 3203-1997 POLYSTYRENE SHEETS
KS M ISO 5478:2010 Rubber－Determination of styrene content－Nitration method
KS M 3203-2004 POLYSTYRENE SHEETS
KS M ISO 5478-2021 Rubber－Determination of styrene content－Nitration method
KS M ISO 4655-2009(2014) Rubber－Reinforced styrene-butadiene latex－Determination of total bound styrene content
KS M ISO 4655-2020 Rubber－Reinforced styrene-butadiene latex－Determination of total bound styrene content
KS M 3347-1986 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3347-2022 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-1979(1997) ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2011 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-1982 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M ISO 5478-2010(2015) Rubber－Determination of styrene content－Nitration method
KS M 3351-2002 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2016(2021) Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3347-2016 Acrylonitrile-butadiene-styrene(ABS) sheets

IN-BIS

IS 4105-1988 Styrene (vinylbenzene) specifications
IS 3928-1986 Specification for styryl acetate

GSO

GSO ISO 3136:2015 Rubber latex -- Styrene-butadiene -- Determination of bound styrene content
BH GSO ISO 2561:2016 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 2453:2015 Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
BH GSO ASTM D6163:2017 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
OS GSO ASTM D6163:2015 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
GSO ASTM D6163:2015 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

RO-ASRO

STAS 7459/1-1982 STYRENE-BUTADIENE COPOLY- MERS Delerinination of bound styrene conlvnt
STAS SR ISO 3136:1994 Rubber Latex - Styrene-Butadiene Determination of bound styrene content
STAS 7459/2-1974 Rubbcrs RAW BUTADIENE-STYRENE RUBBER Detcrmination of bound a-methyl styrene monomer content
STAS 10045-1989 PLASTICS Styrefte determination ol polystyrene
STAS 7862-1980 POLYSTYRENE
STAS 8365/2-1990 Rubber. Test recipe for butadiene-styrene and butadiene-alphamethyil styrene rubbers testing
STAS 12207-1984 TECHNICAL STYRENE
STAS 10754-1987 TECHNICAL DIVINYLBENZENE
STAS 9410-1980 SHOCK-RESISTANT POLYSTYRENE PLATES
STAS 7861-1980 IMPACT RESISTANT POLYSTYRENE
STAS 10024-1975 ACRYLONITRILE- BUTADIENE - STYRENE COPOLYMER
STAS 10365-1983 PLASTICS Determination of soluble substanees in methyl aleohol of polystirene

RU-GOST R

GOST R 54551-2011 Rubber styrene-butadiene. Determination of bound styrene content. Refractive index method
GOST 24654-1981 Synthetic rubbers. Method for determination of bound styrene content and alpha-methylstyrene
GOST 22019-1985 Synthetic rubbers. Method for determination of free styrene and alpha-methyl styrene
GOST 10003-1990 Styrene. Specifications
GOST 23492-1983 Synthetic rubbers, butadiene-styrene SKS-30ARKPN and butadiene-methylstyrene SKMS-30ARKPN. Specifications
GOST 24921-1981 Synthetic latexes. Determination of bound styrene content
GOST 15820-1982 Polystyrole and copolymers of styrole. Gas chromatographic method for determination of resictual monomers and non-polymerizing impurities
GOST 12998-1985 Polystyrene film. Specifications
GOST 12851-1987 Polystyrene filaments. Specifications
GOST 15627-1979 Synthetic rubbers butadiene-methylstyrene CKMC-30 APK and butadiene-styrene CKC-30 APK. Specifications

FI-SFS

SFS 4388-1979 plastic. Polystyrene. Determination of styrene content depicted by vaporized chromium

British Standards Institution (BSI)

22/30446382 DC BS ISO 3136. Rubber latex. Styrene-butadiene. Determination of bound styrene content
BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS ISO 2561:2023 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 21561-2:2016 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR. FTIR with ATR method
BS ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
23/30428206 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
18/30358631 DC BS ISO 2453. Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
BS ISO 21561-1:2015 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR. 1H-NMR and IR with cast-film method
BS EN ISO 19065-2:2019 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Preparation of test specimens and det...

American National Standards Institute （ANSI)

BS ISO 3136:2023 Rubber latex. Styrene-butadiene. Determination of bound styrene content (British Standard)
ANSI/ASTM D4225:1997 Specification for Styrene-Butadiene Sheeting (08.03)

KR-KS

KS M ISO 2561-2013(2023) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography

American Society for Testing and Materials (ASTM)

ASTM D4026-06(2021) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM D4026-87(2002)e1 Standard Test Method for Rubber Latex-Styrene-Butadiene Copolymer-Determination of Residual Styrene
ASTM D4026-06(2012) Standard Test Method for Rubber Latexmdash;Styrene-Butadiene Copolymermdash;Determination of Residual Styrene
ASTM D4026-06 Standard Test Method for Rubber Latex8212;Styrene-Butadiene Copolymer8212;Determination of Residual Styrene
ASTM D4590-18 Standard Test Method for Colorimetric Determination of p-tert -Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
ASTM D3314-02(2021) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
ASTM D5775-95(2023) Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
ASTM D4026-06(2017) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM D4225-97 Standard Specification for Styrene-Butadiene Sheeting
ASTM D6164/D6164M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6164-05e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6164-00 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6164-05 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6163/D6163M-16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
ASTM D6163-00(2008) Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
ASTM D6162-00a(2008) Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM D6163-00 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
ASTM UOP913-92 Impurities in Styrene by Gas Chromatography
ASTM D6164/D6164M-16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D2827-00 Standard Specification for Styrene Monomer
ASTM D2827-19 Standard Specification for Styrene Monomer
ASTM D2827-08 Standard Specification for Styrene Monomer
ASTM D4549-03 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D2121-07 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
ASTM D2827-13 Standard Specification for Styrene Monomer
ASTM D2827-12a Standard Specification for Styrene Monomer
ASTM D2827-12 Standard Specification for Styrene Monomer
ASTM D6164/D6164M-11 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D2827-04 Standard Specification for Styrene Monomer
ASTM D4590-22 Standard Test Method for Colorimetric Determination of p-tert -Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
ASTM D2121-00 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
ASTM D3314-02(2012) Standard Test Method for Rubbermdash;Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
ASTM D6163-00e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
ASTM D6298/D6298M-16(2023) Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
ASTM D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D6163/D6163M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
ASTM D6163-00e2 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

Standard Association of Australia （SAA）

AS 2508.3.012:1982 Safe storage and handling information card - Styrene (vinyl benzene, styrene monomer)

Japanese Industrial Standards Committee (JISC)

JIS K 6727:1977 Styrene
JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6869:1999 Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
JIS K 6239-2:2017 Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 2: FTIR with ATR method
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6872:1995 Polystyrene sheets
JIS K 6875:1995 Testing methods for AS resins
JIS K 6874:1995 Testing methods for ABS resins
JIS K 6727 AMD 1:2006 Styrene (Amendment 1)
JIS K 6873:1975 Acrylonitrile-butadiene-styrene (ABS) sheets
JIS K 6239-1:2017 Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 1: 1H-NMR and IR with cast-film method
JIS K 6870:1995 Polystyrene moulding materials

United States Navy

NAVY MIL-S-14195 A REINST NOTICE 2-1990 STYRENE MONOMER
NAVY MIL-S-14195 A-1970 STYRENE MONOMER
NAVY MIL-S-14195 A NOTICE 4-2003 STYRENE MONOMER

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4585.1:1999 Low styrene emission resins - Determination of styrene evaporation from unsaturated polyester and vinyl ester resins

Spanish Association for Standardization (UNE)

UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

SCC

DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
BS ISO 2561:2006 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
10/30211408 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
HOLDEN HN 1854-2009 EXPANDED POLYSTYRENE
HOLDEN HN 1577-2001 Moulding Compound - Styrene Acrylonitrile (SAN)
BS ISO 21561:2005 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
CAN3-A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives
CAN3 A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives
HOLDEN HN 2198-2014 FOAM - POLYSTYRENE - PPO
HOLDEN HN 1459-2001 Polystyrene Moulding Compounds
HOLDEN HN 1259-2007 ACRYLONITRILE BUTADIENE STYRENE (ABS) COMPOUNDS
HOLDEN HN 1011-2001 Adhesive Polystyrene Foam

Association Francaise de Normalisation

NF T46-071*NF ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T54-420*NF EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods.
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T51-901:1981 Plastics. Determination of residual styrene monomer in polystyrene by gas chromatography.

GM Europe

GME QK 000753-1998 Modified thermoplastic elastomer materials based on styrene-ethylene/butylene-styrene. English/German
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME QK 000223-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000225-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000222-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 002500-2006 Reinforced blend of acrylonitrile-butadiene-styrene copolymer (ABS) and acrylic-styrene-acrylonitrile (ASA) English/German
GME QK 000224-1996 Styrol-Acrylnitril-Copolymerisat mit Glasfasern Styrene-Acrylonitrile-Copolymer with Glass Fibres English Translation Available

SE-SIS

SIS 16 66 02-1966 Polystyrene. Determination of the percentage of styrene with Wijs solution
SIS 16 66 60-1966 Styrene moulding and extrusion compounds. General information
SIS SS-ISO 2561:1987 Plastics - Determination of residual styrene monomer in polystyrene by gas chromatography
SIS 16 66 01-1963 Polystyrene. Determination of methanol-soluble matter
SIS 16 66 53-1966 Acrylonilrile-butadiene-slyrene (ABS) moulding and extrusion compounds

US-AAMA

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

US-FCR

FCR VA 07 52 16-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, HOT-APPLIED
FCR VA 07 52 16.13-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, COLD-APPLIED
FCR FED PS31-70-1971 POLYSTYRENE PLASTIC SHEET

US-VA

VA 07 52 16.13-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, COLD-APPLIED

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

German Institute for Standardization

DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN 55471-1:1983 Cellular polystyrene for packaging; requirements and testing
DIN 53741:1971 Testing of Plastics; Determination of Volatile Aromatic Hydrocarbons in Polystyrene; Gas chromatographic Method
DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN 55471-1 Cellular polystyrene for packaging; requirements and testing
DIN EN ISO 19064-2 E:2019-04 Plastic Styrene Acrylonitrile (Draft)
DIN EN ISO 19065-1:2015-03 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN ISO 19062-2 E:2018-03 Plastics Acrylonitrile Butadiene Styrene (Draft)
DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DIN EN ISO 24022-2 E:2019-04 Plastic polystyrene (draft)

European Committee for Standardization (CEN)

EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997

Danish Standards Foundation

DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

CEN - European Committee for Standardization

EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification

YU-JUS

JUS G.C1.073-1984 Rubber, raw styrene — butadien, emulsion polymerized. Test recipe and method of evaluation.

IL-SII

S.I.533-1967 POLYSTYRENE SHEETS

CZ-CSN

CSN 64 0321-1963 Testing of polystyrene hermoplastics
CSN 64 3003-1972 Designation of polystyrene materials
CSN 64 3510 Z1-1995 brick expanded polystyrene
CSN 62 1128-1981 Determination of content of bound styrene or alphamethylstyrene
CSN 64 3510-1986 Expanded polystyrene boards
CSN ON 07 7621-1967 filter polystyrene
CSN 64 3008-1985 Expandable polystyrenes Designation

GOSTR

GOST 23492-2019 Butadiene-methylstyrene SKMS-30ARKPN and butadiene-styrene SKS-30ARKPN rubbers. Specifications
GOST 15627-2019 Butadiene-methylstyrene SKMS-30ARK and butadiene-styrene SKS-30ARK synthetic rubbers. Specifications

GM North America

GM 9985206-1980 Adhesive - Styrene
GM GM9311P-1988 Screen Analysis of Polystyrene Beads

TH-TISI

TIS 655.3-2011 Plastic utensils for food.part 3: acrylonitrile-butadiene-styrene and styrene.acrylonitrile
TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)
TIS 2438-2009 Polystyrene foam mattresses
TIS 2357-2007 Acrylonitrile.butadiene.styrene (abs) pressure pipe

GM Daewoo

GMKOREA EDS-M-4626-2014 Polypropylene and Styrene Butadiene Styrene Copolymer Blend (Version 10; English/Korean)
GMKOREA EDS-M-4624-2014 Polypropylene and styrene, ethylene, butadiene, styrene copolymer blend Shore A 70 (Version 2; English/Korean)
GMKOREA EDS-M-4308-2012 Acrylonitrile-styrene-acrylate copolymer

U.S. Military Regulations and Norms

ARMY L-P-527 B NOTICE 2-2013 PLASTIC SHEET, STYRENE-BUTADIENE

Indonesia Standards

SNI 06-0176-2000 High impact polystyrene
SNI 06-0175-2002 General purpose polystyrene

SG-SPRING SG

SS 323 Pt.D6-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D6 : Determination Of Residual Styrene Monomer In Polystyrene By Gas Chromatography

(U.S.) Ford Automotive Standards

FORD ESA-M4D396-A-1979 ACRYLIC, STYRENE MODIFIED

GM Holden Ltd

HOLDEN HN 2198-2000 Foam - Polystyrene - PPO