peak position spacing

peak position spacing, Total:90 items.

The international standard classification for "peak position spacing" includes: Safety of machinery , Microprocessor systems .

The Chinese standard classification for "peak position spacing" includes: Hygiene, safety and labor protection , Computer peripherals .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 12265-2021 Safety of machinery—Minimum gaps to avoid crushing of parts of the human body

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10094-1988 The confidence interval of quantile Xp for normal distribution
GB/T 12265.3-1997 Safety of machinery--Minimum gaps to avoid crushing of parts of the human body
GB 3910-1983 Office machines and data processing equipment Line spacing and character spacing
GB 12265.3-1997 Safety of machinery--Minimum gaps to avoid crushing of parts of the human body
GB/T 3910-1983 Office machines and data processing equipments; Line spacings and character spacings

Taiwan Provincial Standard of the People's Republic of China

CNS 11221-1985 Office Machines and Data Processing Equipment-Line Spacings and Character Spacings

Group Standards of the People's Republic of China

T/GDSBME 006-2023 Near-infrared optical positioning system spatial position test method

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE ST 83-1996 For Motion-Picture Film (16-mm) - Edge Numbers - Location and Spacing
SMPTE RP 164-1996 Location of Vertical Interval Time Code

International Organization for Standardization (ISO)

ISO/CD 23408:2023 Road Vehicles — Ergonomic aspects of foot control layout,location, spacing and clearance
ISO 4882:1979 Office machines and data processing equipment; Line spacings and character spacings
ISO 8370:1987 V- and ribbed V-belts — Dynamic test to determine pitch zone location

Association Francaise de Normalisation

NF E24-404:2007 Belt drives - V-ribbed belts - Determination of measurement of pitch, angle and cord position.
NF E24-404:1995 Belt drives. V-ribbed belts. Determination of measurement of pitch, angle and cord position.

HU-MSZT

MNOSZ 5535-1956 Microscope Preparation Healing Spring Table/Peak Position

Institute of Electrical and Electronics Engineers (IEEE)

SMPTE ST 83:1996 ST 83:1996 - SMPTE Standard - For Motion-Picture Film (16-mm) — Edge Numbers — Location and Spacing

Korean Agency for Technology and Standards (KATS)

KS R ISO 3409-2022 Passenger cars－Lateral spacing of foot controls
KS D 5504-1981 Tough pitch copper sheets
KS D 5517-1981 Tough pitch copper ribbons
KS D 5502-1980 Tough pitch copper bars
KS D 5519-1975 Tough pitch copper plates

German Institute for Standardization

DIN 43601:1987 Centerline spacings and rail gauges for rollers of switchgear and instrument transformers
DIN 9119-2:1985 Aerospace; riveting; distances between rivets and distances between rows
DIN 42561-3:1992-09 Transformers; rollers; center-line spacings and rail gauges
DIN EN 294:1992 Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs; german version EN 294:1992

IN-BIS

IS 9238-1979 Lateral spacing of foot controls for passenger cars
IS 2642-1985 T-slot spacing
IS 12414-1988 Knitting machine needle spacing

GSO

BH GSO ISO 3409:2016 Passenger cars -- Lateral spacing of foot controls
GSO ISO 3409:2015 Passenger cars -- Lateral spacing of foot controls
GSO ISO 3158:2015 Timekeeping instruments -- Symbolization of control positions
OS GSO ISO 4882:2013 Office machines and data processing equipment -- Line spacings and character spacings
GSO IWA 23:2021 Interoperability of microfluidic devices — Guidelines for pitch spacing dimensions and initial device classification
BH GSO IWA 23:2022 Interoperability of microfluidic devices — Guidelines for pitch spacing dimensions and initial device classification
GSO ISO 4882:2013 Office machines and data processing equipment -- Line spacings and character spacings

ZA-SANS

SANS 1795-3:2007 Road traffic law enforcement systems Part 3: Distance-over-time speed measuring equipment (fixed distance/variable time)
SANS 1795-4:2007 Road traffic law enforcement systems Part 4: Distance-over-time speed measuring equipment (variable distance/variable time)

VN-TCVN

TCVN 6721-2000 Safety of machinery.Minimum gaps to avoid crushing of parts of the human body

AT-ON

ONORM A 2604-1980 Character spacings and line spacings for typing and printing machines
ONORM A 2554-1980 Character sizes, character spacings and line spacings for typewriters
ONORM E 1370-1954 Intermediate spacing and track gauge of conveyor rollers for electrical engineering products

CH-SNV

SEV 3003-1963 Planting spacing

Defense Logistics Agency

DLA MIL-DTL-55302/191 B-2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
DLA MIL-DTL-55302/193 B-2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 122 AND 152 POSITION, PRINTED WIRING BOARD (.075 SPACING)
DLA MIL-DTL-55302/56 H (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
DLA MIL-DTL-55302/126 D VALID NOTICE 1-2012 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, 80 Contact Positions, for Printed Wiring Boards (.050 Inch Spacing)
DLA MIL-DTL-55302/57 H (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
DLA MIL-DTL-55302/56 H (2)-2013 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)

CZ-CSN

CSN 30 0430-1983 Tractors. Electrical sockets. Space for location

NL-NEN

NEN-EN 349-1993 Safety of machinery. Minimum gaps to avoid crushing of parts of the human body

SCC

MIL MIL-DTL-55302/63H-2008 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing)
MIL MIL-DTL-55302/65H-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL MIL-DTL-55302/193B-2009 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, 122 and 152 Position, Printed Wiring Board (.075 Spacing)
MIL MIL-DTL-55302/58J-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSTIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING MI...
MIL MIL-DTL-55302/61G-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54, AND 26, 36, 56, AND 66 FOR PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING MIL-C...
MIL MIL-C-55302/65G-1993 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY &ACCESSORIES,RECEPTACLE,SOCKET CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS&INTERMEDIATE POSITIONS OF 14,24,44,54,26,36,56,66 FOR PRINTED WIRING BOARDS(.100 IN SPACING) (SUPERSEDING MIL-C-55302/65F)
MIL MIL-DTL-55302/66G-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING ...
MIL MIL-DTL-55302/57H-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND F26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING MIL-C-55...
MIL MIL-C-55302/66E-1988 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY &ACCESSORIES, RECEPTACLE,SOCKET CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14,24,44,54,26,36,56,66 FOR PRINTED WIRING BOARDS (.100 IN SPACING) (S/S BY MIL-C-55302/66F)
MIL MIL-C-55302/58H-1992 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY &ACCESSORIES,RECEPTACLE,SOCKET CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS& INTERMEDIATE POSITIONS OF 14,24,44,54&26,36,56,66 FOR PRINTED WIRING BOARDS (.100 INSPACING) (SUPERSEDING MIL-C-55302...
MIL MIL-C-55302/62F-1988 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY &ACCESSORIES,RECEPTACLE,SOCKET CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS& INTERMEDIATEPOSITIONS OF 14,24,44,54,26,36,56,66 FOR PRINTED WIRING BOARDS (.100 IN SPACING) (S/S BY MIL-C-55302/62G)
MIL MIL-C-55302/66F-1993 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY &ACCESSORIES,RECEPTACLE,SOCKET CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS&INTERMEDIATE POSITIONS OF 14,24,44,54,26,36,56,66 FOR PRINTED WIRING BOARDS(.100 IN SPACING) (SUPERSEDING MIL-C-55302/66E)...
MIL MIL-C-55302/62G-1993 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY &ACCESSORIES,RECEPTACLE,SOCKET CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS& INTERMEDIATE POSITIONS OF 14,24,44,54,26,36,56,66 FOR PRINTED WIRING BOARDS(.100 IN SPACING) (SUPERSEDING MIL-C-55302/62F...
MIL MIL-DTL-55302/62H-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING M...
MIL MIL-DTL-55302/64H-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING ...
MIL MIL-C-55302/63F-1993 CONNECTORS,PRINTED CIRCUIT SUBASSEMBLY& ACCESSORIES,PLUG,PIN CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS&INTERMEDIATE POSITIONS OF 14,24,44,54,26,36,56,66 FOR PRINTED WIRING BOARDS (.100 IN SPACING) (SUPERSEDING MIL-C-55302/63E) (S/S BY ...
MIL MIL-C-55302/57G-1992 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY& ACCESSORIES,PLUG,PIN CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS& INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66, FOR PRINTED WIRING BOARDS (.100 IN SPACING) (SUPERSEDING MIL-C-55302/...
MIL MIL-DTL-55302/63G-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING MIL-C-553...
MIL MIL-DTL-55302/55G-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING MIL-C-...
MIL MIL-C-55302/63E-1988 CONNECTORS,PRINTED CIRCUIT SUBASSEMBLY &ACCESSORIES,PLUG,PIN CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS&INTERMEDIATE POSTITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 IN SPACING) (S/S BY MIL-C-55302/63F)
MIL MIL-C-55302/64G-1993 CONNECTORS,PRINTED CIRCUIT SUBASSEMBLY& ACCESSORIES, RECEPTACLE, SOCKET CONTACTS,DECADE INCREMENTS 10-70 CONTACT POSITIONS&INTERMEDIATE POSITIONS OF 14,24,44,54,26,36,56,66 FOR PRINTED WIRING BOARDS(.100 IN SPACING) (SUPERSEDING MIL-C-55302/64F...
MIL MIL-DTL-55302/56H-2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) (SUPERSEDING MIL...
MIL MIL-C-55302/61F-1993 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY &ACCESSORIES,PLUG,PIN CONTACTS,DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS& INTERMEDIATE POSITIONS OF 14,24,44,54,26,36,56&66 FOR PRINTED WIRING BOARDS (.100 INCH SPACING) (SUPERSEDING MIL-C-55302/...
MIL MIL-DTL-55302/125D-2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, 80 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING)
NS 4099:1979 Office machines and data processing equipment — Line spacing and character spacings
ISO/IWA 23:2016 Interoperability of microfluidic devices - Guidelines for pitch spacing dimensions and initial device classification

JP-JEM

JEM 1334-2008 Clearances and creepage distances for low-voltage switchgear and controlgear assemblies

Standard Association of Australia （SAA）

AS/NZS 4024.1803:2014 Mechanical safety safety distance and safety gap are the minimum gaps to prevent crushing of human body parts

Japanese Industrial Standards Committee (JISC)

JIS D 0022:1984 Lateral spacing of foot controls for automobiles
JIS B 0953:1987 Spacing of parallel T slots

GB-REG

REG 33 CFR PART 115-2011 BRIDGE LOCATIONS AND CLEARANCES; ADMINISTRATIVE PROCEDURES
REG 36 CFR PART 1253-2011 LOCATION OF NARA FACILITIES AND HOURS OF USE

Danish Standards Foundation

DS/EN 349:1994 Safety of machinery. Minimum gaps to avoid crushing of parts of the human body

British Standards Institution (BSI)

BS ISO 8370-2:1993 Belt drives. Dynamic test to determine pitch zone location - V-ribbed belts
BS ISO 8370-1:1993 Belt drives. Dynamic test to determine pitch zone location - V-belts

RO-ASRO

STAS 6055-1982 SPEED REDUCERS Distance between axes
STAS 4531-1989 Narrow railways. Clearances

SE-SIS

SIS SS 60 20 02-1979 Office machines and data processing equipment — Line spacings and character spacings

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 8.21-1996 Spacing Limits for Reinforcement

Others: peak distance,peak position spacing,peak distance,g peak position,peak-to-peak distance,Energy peak spacing,d peak position,Vibration peak position,peak position,Oxygen peak position,ms peak position,dsc peak position,peak position column,Tooth crest spacing,peak g peak position,Water peak location,peak distance,Solvent peak position,Split peak position