peak distance

peak distance, Total:171 items.

The international standard classification for "peak distance" includes: Microprocessor systems , Transmissions, suspensions , Chemical analysis , Textile fabrics , Coals .

The Chinese standard classification for "peak distance" includes: Computer peripherals , Steering and operation systems , Basic standards and general methods , Other textile articles , Turnout and steel rail expansion piece , Coal for coking, chemical and building materials .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 44002-2024 Space environment—Method of the solar energetic protons fluences and peak fluxes determination
GB 3910-1983 Office machines and data processing equipment Line spacing and character spacing
GB/T 17346-1998 Passenger cars - Lateral spacing of foot controls
GB/T 16904.2-2006(英文版) Checking of rolling stock clearance for standard gauge railways—Part 2:Clearance treadle
GB/T 3910-1983 Office machines and data processing equipments; Line spacings and character spacings

Taiwan Provincial Standard of the People's Republic of China

CNS 3260-1971 Peaking Coil
CNS 11221-1985 Office Machines and Data Processing Equipment-Line Spacings and Character Spacings

Group Standards of the People's Republic of China

T/UWA 011-2022 Ultra-high-definition ultra-fine-pitch LED display technical requirements
T/CASME 78-2022 Variable pitch metal louvers for shading and light guiding for buildings
T/COEMA 108S-2021 Technology specification for fine pixel pitch/Mini LED displays
T/CECA 74-2022 0.5mm、0.635mm、0.8mm Pitch Floating Board to Board Connector
T/CECA 94-2023 2.00mm Pitch SIC High-Performance serial Connector
T/XYDX 0001-2024 Small spacing liquid crystal display with layered RGB LED
T/ZJTSS 010-2024 Liancheng Wufeng Tea
T/SFXF 1-2020 Torreya bimodal
T/HBAS 023-2022 Chibi Songfeng Tea
T/WFCYXH 003-2021 Wufeng Maojian
T/CECA 73-2022 1.27mm pitch PCB connector for automobile
T/CSTM 01039-2023 Substrate glass for mini light emitting diodes
T/CECA 95-2023 1.27mm pitch Small Computer System Interface Connector
T/ZZB 0741-2018 Indoor small pitch LED displays

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41073-2021 Surface chemical analysis―Electron spectroscopies―Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy

Professional Standard - Textile

FZ/T 64081-2021 Large gauge warp-knitted spacer composite fabric

Professional Standard - Petroleum

SY/T 5334-1996 Calculation method of installation distance of casing centralizer

Hubei Provincial Standard of the People's Republic of China

DB42/ 304-2005 Hefeng Indocalmus Leaves
DB42/ 303-2005 Hefeng Osmund
DB42/T 293-2004 Longfeng Tea

Professional Standard - Railway

TB/T 439-1975 Middle Filler for Turnout Guard Rail
TB/T 1137-1975 Spacer Block of Turnout Heel

煤炭工业部

MT/T 731.1-1997 Technical condition of coal for metallurgical coke supplied by Fengfeng mining bureau

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 2285-2021 Chifeng tomato

CH-SNV

SEV 3003-1963 Planting spacing

AT-ON

ONORM A 2604-1980 Character spacings and line spacings for typing and printing machines
ONORM A 2554-1980 Character sizes, character spacings and line spacings for typewriters
ONORM E 1370-1954 Intermediate spacing and track gauge of conveyor rollers for electrical engineering products
ONORM A 1610 Teil.2-1989 Requirements for furniture;dimensions, areas required, spacings

IN-BIS

IS 2642-1985 T-slot spacing
IS 12414-1988 Knitting machine needle spacing
IS 9238-1979 Lateral spacing of foot controls for passenger cars

Korean Agency for Technology and Standards (KATS)

KS D 5504-1981 Tough pitch copper sheets
KS D 5517-1981 Tough pitch copper ribbons
KS D 5519-1975 Tough pitch copper plates
KS D 5502-1980 Tough pitch copper bars
KS D 5501-1980 SEAMLESS Tough pitch copper plates
KS B 0904-2004 SPACING OF PARALLEL T SLOTS
KS B ISO 2860:2012 Earth-moving machinery－Minimum access dimensions
KS R ISO 3409-2002(2022) Passenger cars－Lateral spacing of foot controls
KS R ISO 3409-2002(2017) Passenger cars－Lateral spacing of foot controls
KS R 1075-1988 Lateral spacing of car foot switch
KS R ISO 3409-2022 Passenger cars－Lateral spacing of foot controls
KS R 9102-2002(2017) Rail spikes

International Organization for Standardization (ISO)

ISO 4882:1979 Office machines and data processing equipment; Line spacings and character spacings
ISO 5179:2021 Investigation of brazeability with spreading and gap-filling test
ISO 5179:1983 Investigation of brazeability using a varying gap test piece

RO-ASRO

STAS 6055-1982 SPEED REDUCERS Distance between axes
STAS 4531-1989 Narrow railways. Clearances
STAS 12817-1990 KNITTING MACHINES Pitches of needles
STAS 12059-1989 Disc harrows SPACING SPOOLS Dimensions
STAS 8297/5-1981 SEWING MACHINES FOR HOUSEHOLD USE Determination of spacing between stitches

GSO

OS GSO ISO 4882:2013 Office machines and data processing equipment -- Line spacings and character spacings
GSO ISO 4882:2013 Office machines and data processing equipment -- Line spacings and character spacings
OS GSO ISO 8188:2014 Textile machinery and accessories -- Pitches of knitting machines
BH GSO ISO 3409:2016 Passenger cars -- Lateral spacing of foot controls
GSO ISO 3409:2015 Passenger cars -- Lateral spacing of foot controls

SE-SIS

SIS SS 60 20 02-1979 Office machines and data processing equipment — Line spacings and character spacings
SIS 60 20 02-1965 Office machines and forms. Spacing and pitch
SIS SS 1793-1980 Screwing dies — Inch screw threads — Coarse pitch
SIS SS 1794-1980 Screwing dies — Inch screw threads — Fine pitch
SIS SS 1791-1980 Short screwing taps with relieved shank — Inch screw threads — Fine pitch
SIS SS-ISO 16:1985 Acoustics — Standard tuning frequency (Standard musical pitch)

Japanese Industrial Standards Committee (JISC)

JIS B 0953:1987 Spacing of parallel T slots

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 8.21-1996 Spacing Limits for Reinforcement
DIVISION I 9.26-1996 Cover and Spacing of Steel (Interim 1998; Interim 1999)

SCC

NS 4099:1979 Office machines and data processing equipment — Line spacing and character spacings
BS 5870:1980 Recommendations for line spacings and character spacings for office machines and data processing equipment
NS-EN 16603-50-02:2014 Space engineering — Ranging and Doppler tracking
DANSK DS/EN 16603-50-02:2014 Space engineering - Ranging and Doppler tracking
DIN EN 16602-70-07 E:2014 Draft Document - Space product assurance - Verification and approval of automatic machine wave soldering; English version FprEN 16602-70-07:2013
DIN EN 16603-50-02 E:2014 Draft Document - Space engineering - Ranging and Doppler tracking; English version FprEN 16603-50-02:2013

German Institute for Standardization

DIN 9119-2:1985 Aerospace; riveting; distances between rivets and distances between rows
DIN 42561-3:1992-09 Transformers; rollers; center-line spacings and rail gauges
DIN 998:1970 Hole Pitches in Unequal Angle Steels
DIN 43601:1987-05 Centerline spacings and rail gauges for rollers of switchgear and instrument transformers
DIN 43601:1987 Centerline spacings and rail gauges for rollers of switchgear and instrument transformers
DIN EN 16603-50-02:2014-12 Space engineering - Ranging and Doppler tracking; English version EN 16603-50-02:2014
DIN 55200:1989-09 Machine tools; spacing of T-slots; dimensions
DIN 69001-47:1994 Machine tools; multi-spindle heads; distance rings types A to E
DIN 69638:1984-03 Machine tools; slotted profiles and spacing of slots; dimensions

International Telecommunication Union (ITU)

ITU-R SM.337-6 ARABIC-2008 Frequency and distance separations
ITU-R SM.337-6-2008 Frequency and distance separations
ITU-R SM.337-2008 Frequency and distance separations
ITU-R SM.337-6 RUSSIAN-2008 Frequency and distance separations ????????? ? ??????????????? ??????
ITU-R SM.337-6 SPANISH-2008 Frequency and distance separations
ITU-R SM.337-6 FRENCH-2008 Frequency and distance separations
ITU-R SM.337-6 CHINESE-2008 Frequency and distance separations

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R SM.337-4-1997 Frequency and Distance Separations

Society of Automotive Engineers (SAE)

SAE J1221-1988 Headlamp~Turn Signal Spacing
SAE AS1868-5-1943 AS1868 Pulley - (B.S.1 Chain, 8mm Pitch)
SAE AS1871-7-1943 AS1871 Pulley - (B.S.6 Chain, 1/2" Pitch)
SAE AS1870-4-1943 AS1870 Pulley - (B.S.4 Chain, 1/2" Pitch)
SAE ARP5628-2005 Final Approach Spacing System (FASS)
SAE J737-2006 Hole Spacing for Scraper and Dozer Cutting Edges
SAE ARP1332-1974 WAVE SOLDERING PRACTICE
SAE AS7310-4-1969 AS7310-7345 B.S.1. Chain (8mm Pitch) and Fittings Assembly Code
SAE AS200-9-2015 AS200-209 B.SI. Chain (8mm Pitch) and Fittings Assembly Code

SAE - SAE International

SAE J1221-1978 HEADLAMP-TURN SIGNAL SPACING
SAE J1221-1984 HEADLAMP-TURN SIGNAL SPACING
SAE J737-2007 Hole Spacing for Scraper and Dozer Cutting Edges
SAE J737-1983 Hole Spacing for Scraper and Dozer Cutting Edges
SAE ARP1332C-2007 Wave Soldering Procedure

HU-MSZT

MSZ 203/2-1985 Nominal diameter and spacing
MSZ MI 2178-1975 wave soldering

CZ-CSN

CSN 73 1411-1998 Spacing, row spacing, diameter of screws or rivets. Shafts connected with screws and rivets
CSN 34 0130-1970 Creepage distances and clearances
CSN 35 9011-1984 Printed boards. Grid spancings
CSN 28 0334-1955 The distance between the steel ring and the rail is 1435 mm
CSN 28 0326-1955 Instruments and vehicle enclosures with spacing of 760 mm
CSN 28 0130-1956 Accuracy of truck bed with 1435 mm pitch
CSN 46 5451-1976 Row distances, seeding and planting,rates, spacings and depths of mechanically cultivated plants.

American National Standards Institute （ANSI)

ANSI/ASME B29.100-2011 Precision Power Transmission, Double-Pitch Power Transmission, and Double-Pitch Conveyor Roller Chains, Attachments and Sprockets

RU-GOST R

GOST 18736-1980 Overrunning stop cutting blades. Design and dimensions
GOST 18737-1980 Overrunning stop cutting blades with lugs. Design and dimensions
GOST 18738-1980 Stops for overrunning stop cutting blades. Design and dimensions
GOST 5332-1975 Rollers and spacings of roll tables of rolling mills. General specifications

Spanish Association for Standardization (UNE)

UNE 100152:2004 IN AIR CONDITIONING. PIPE SUPPORT SPACING
UNE 26196:1983 PASSENGER CARS. LATERAL SPACING OF FOOT CONTROLS.
UNE-EN 16603-50-02:2014 Space engineering - Ranging and Doppler tracking (Endorsed by AENOR in November of 2014.)
UNE 40514:1987 TEXTILE MACHINERY AND ACCESORIES. PITCHES OF KNITTING MACHINE NEEDLES

BE-NBN

NBN 854-1971 Milling machine spindle equipment ring spacing
NBN E 60-101-1973 T-slot dimensions, spacing and accessories
NBN-EN 349-1993 Safety of machinery. Minimum gaps to avoid crushing of parts of the human body
NBN G 46-003-1988 Textile machinery and accessories - Pitches of knitting machine needles

British Standards Institution (BSI)

13/30276628 DC BS EN 62704-3. Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 3. Specific Requirements for using the Finite-Difference Time-Domain (FDTD) Method for SAR C...
13/30276624 DC BS EN 62704-1. Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 1. General Requirements for using the Finite Difference Time Domain...
BS EN 13402-3:2004 Size designation of clothes-Part 3:Measurements and intervals

National Association of Pipe Fabricators (NAPF)

PFI ES-7-2004 Minimum Length and Spacing for Welded Nozzles
PFI ES-7-1994 Minimum Length and Spacing for Welded Nozzles R(2002)
PFI ES-7-2013 MINIMUM LENGTH AND SPACING FOR WELDED BRANCH CONNECTIONS

JP-JEITA

JEITA EDR-7316C-2007 Design guideline of integrated circuits for Fine-pitch Ball Grid Array and Fine-pitch Land Grid Array

Indonesia Standards

SNI 3153-2008 Track width of four wheels agricultural tractors
SNI 04-6918-2002 Free space and minimum free distance in high transmisiion line and high extra voltage transmission

VN-TCVN

TCVN 330-1986 Round nuts with radially spacrd holes

Danish Standards Foundation

DS 2174:1981 Furniture. Children's code. Determination of durability and clearance between side slats

South African Bureau of Standard

SANS 1795-3:2007 Road traffic law enforcement systems Part 3: Distance-over-time speed measuring equipment (fixed distance/variable time)
SANS 1795-4:2007 Road traffic law enforcement systems Part 4: Distance-over-time speed measuring equipment (variable distance/variable time)

PL-PKN

PN B12042-1992 Dranaige. Design. Spacing and depth of dranaige
PN T01504-60-1987 Diodes Measuring methods Instant and peak forward recovery voltages Ufr, Ufrm and forward recovery time tfr

IT-UNI

UNI 2504-1944 Ships use slip hooks. Spacing operation class

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC SMC-TR-001-1989 Introduction to Tape Automated Bonding& Fine Pitch Technology
IPC TA-722 SECTION 5 Wave Soldering

Aeronautical Radio Inc.

ARINC 404A CHAP 4 Standardized Spacing of Adjacent Equipment Units

TR-TSE

TS 1057-1972 CREEPAGE DISTANCES AND CLEARANCES ?N AIR

BR-ABNT

ABNT PB-480 Pt.2-1979 Belt conveyor. Transport belt edge spacing

Association Francaise de Normalisation

NF G07-163:1990 Textiles. Test for fabrics. Measurement of angular spacing.
XP P18-465:2020 Hardened concrete - Determination of the air void spacing factor
NF EN 16603-50-02:2016 Space engineering - Distance measurement and Doppler tracking
NF L92-309*NF ISO 1464:1988 Aerospace. Tripod jacks. Clearance dimensions.

GM Europe

GME4087-2007 Critical proximity, maximum impact distance between engine hood and trunk lid / tailgate Critical Proximity, maximum impact distance between engine hood and trunk lid / tailgate German/English; Includes Appendix A - C; This standard may be ap

YU-JUS

JUS N.K0.010-1979 Low-voltage controlgear. Clearences and creepage distances

Standard Association of Australia （SAA）

AS G25:1969 3-in pitch corrugated hot-dipped galvanized (zinc-coated) steel sheets

Underwriters Laboratories (UL)

UL 1059 CRD-2016 "UL Standard for Safety Terminal Blocks - Section / Paragraph Reference: Section 8 Subject: New Spacing Option in Accordance with Spacing Provisions in UL 508@ Section 39@ and UL 508C@ Section 36.9 - ""Alternative Spacings"" (600 – 1500 Volts) (Edition 4:

CU-NC

NC 59-06-15-1986 National Eiectrotechnical Vocabulary. Teiecommunications Space Radio

AGMA - American Gear Manufacturers Association

99FTM3-1999 Measurement Uncertainty for Pitch and Runout Artifacts

American Welding Society (AWS)

WRC 453:2000 Minimum Weld Spacing Requirements For API Above Ground Storage Tanks

IPC - Association Connecting Electronics Industries

IPC SMC-TR-001 CD-1989 Introduction to Tape Automated Bonding & Fine Pitch Technology
IPC TM-650 2.2.2-1986 Conductor Width and Spacing; Revision A - May 1986

WRC - Welding Research Council

BULLETIN 453-2000 MINIMUM WELD SPACING REQUIREMENTS FOR API ABOVE GROUND STORAGE

European Committee for Standardization (CEN)

EN ISO 5179:2023 Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4159-1998 Sound Pressure Level VS. Distance from Sources in Rooms (RP-755)

American Gear Manufacturers Association

AGMA 05FTM01-2005 Fine Pitch, Plastic Face Gears: Design and Manufacture

IX-ICAO

ICAO 9574-2012 Manual on Implementation of a 300 m (1000 ft) Vertical Separation Minimum Between FL 290 and FL 410 Inclusive